diff options
author | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
---|---|---|
committer | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
commit | 51eafdeae621f1b04db51c3b4a690fa993aa48a0 (patch) | |
tree | e36ad669d05eecf00ce5826f8fb3fad8409ebec7 /src/mainboard/pcengines | |
parent | f2573bd23727db672b22f3840ce91d08ec3aea5d (diff) | |
download | coreboot-51eafdeae621f1b04db51c3b4a690fa993aa48a0.tar.gz coreboot-51eafdeae621f1b04db51c3b4a690fa993aa48a0.tar.bz2 coreboot-51eafdeae621f1b04db51c3b4a690fa993aa48a0.zip |
Enable or disable the power button in Kconfig
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.
This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)
The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.
All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.
Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.
Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/pcengines')
-rw-r--r-- | src/mainboard/pcengines/alix1c/Kconfig | 1 | ||||
-rw-r--r-- | src/mainboard/pcengines/alix2d/Kconfig | 1 | ||||
-rw-r--r-- | src/mainboard/pcengines/alix2d/romstage.c | 6 |
3 files changed, 2 insertions, 6 deletions
diff --git a/src/mainboard/pcengines/alix1c/Kconfig b/src/mainboard/pcengines/alix1c/Kconfig index b10095c90272..0a016a54f56f 100644 --- a/src/mainboard/pcengines/alix1c/Kconfig +++ b/src/mainboard/pcengines/alix1c/Kconfig @@ -11,6 +11,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select PIRQ_ROUTE select UDELAY_TSC select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_DEFAULT_DISABLE config MAINBOARD_DIR string diff --git a/src/mainboard/pcengines/alix2d/Kconfig b/src/mainboard/pcengines/alix2d/Kconfig index bb54d1cad118..264f5d9e9770 100644 --- a/src/mainboard/pcengines/alix2d/Kconfig +++ b/src/mainboard/pcengines/alix2d/Kconfig @@ -10,6 +10,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select PIRQ_ROUTE select UDELAY_TSC select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_DISABLE config MAINBOARD_DIR string diff --git a/src/mainboard/pcengines/alix2d/romstage.c b/src/mainboard/pcengines/alix2d/romstage.c index aa5f7a0fc40e..10ab27d6627e 100644 --- a/src/mainboard/pcengines/alix2d/romstage.c +++ b/src/mainboard/pcengines/alix2d/romstage.c @@ -120,12 +120,6 @@ static u8 spd_read_byte(u8 device, u8 address) static void mb_gpio_init(void) { /* - * Disable power button, since it is hardwired to ground on this board, - * and the power would be cut off atfer a 4-second delay otherwise. - */ - outl(0x00020000, PMS_IO_BASE + 0x40); - - /* * Enable LEDs GPIO outputs to light up the leds * This is how the original tinyBIOS sets them after boot. * Info: GPIO_IO_BASE, 0x6100, is only valid before PCI init, so it |