diff options
author | Nico Huber <nico.h@gmx.de> | 2019-10-08 20:24:05 +0200 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-10-16 14:06:52 +0000 |
commit | 3b57a7c37be328ab0720380331e4c9257675f381 (patch) | |
tree | 5ed735666c0e98046b28fa74b878386bda47beba /src/mainboard/purism/librem_bdw/variants | |
parent | 9a4ca626d8e486a3a2bf294895052e6a3c8f0ded (diff) | |
download | coreboot-3b57a7c37be328ab0720380331e4c9257675f381.tar.gz coreboot-3b57a7c37be328ab0720380331e4c9257675f381.tar.bz2 coreboot-3b57a7c37be328ab0720380331e4c9257675f381.zip |
intel/broadwell: Implement proper backlight PWM config
Port the backlight-PWM handling from Skylake instead of the previously
used Haswell version. We use a 200Hz PWM signal for all boards. Which
is higher than the previous devicetree value, 183Hz, but that was over-
ridden by the VBIOS anyway. 200Hz is still very low, considering LED
backlights, but accurate values are unknown at this time.
Lynx Point, the PCH for Haswell and Broadwell, is a transition point
for the backlight-PWM config. On platforms with a PCH, we have:
o Before Lynx Point:
The CPU has no PWM pin and sends the PWM duty-cycle setting
to the PCH. The PCH can choose to ignore that and use its own
setting (BLM_PCH_OVERRIDE_ENABLE).
We use the CPU setting on these platforms.
o Lynx Point + Haswell:
The CPU has an additional PWM pin but can be set up to send
its setting to the PCH as before. The PCH can still choose
to ignore that.
We use the CPU setting with Haswell.
o Lynx Point + Broadwell:
The CPU can't send its setting to the PCH anymore. BLM_PCH_
OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is
used (it virtually always is).
We have to use the PCH setting in this case.
o After Lynx Point:
Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is
implied and the bit not implemented anymore.
Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/purism/librem_bdw/variants')
-rw-r--r-- | src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb | 5 | ||||
-rw-r--r-- | src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb | 5 |
2 files changed, 4 insertions, 6 deletions
diff --git a/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb b/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb index e713cd2f5602..98b5163b5f8b 100644 --- a/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb +++ b/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb @@ -6,9 +6,8 @@ chip soc/intel/broadwell # Enable DDI1 Hotplug with 6ms pulse register "gpu_dp_b_hotplug" = "0x06" - # Set backlight PWM values for eDP - register "gpu_cpu_backlight" = "0x00000200" - register "gpu_pch_backlight" = "0x04000200" + # Set backlight PWM value for eDP + register "gpu_pch_backlight_pwm_hz" = "200" # Enable Panel and configure power delays register "gpu_panel_port_select" = "1" # eDP diff --git a/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb b/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb index 3e83d3fb1a06..32c3ed166f76 100644 --- a/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb +++ b/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb @@ -6,9 +6,8 @@ chip soc/intel/broadwell # Enable DDI1 Hotplug with 6ms pulse register "gpu_dp_b_hotplug" = "0x06" - # Set backlight PWM values for eDP - register "gpu_cpu_backlight" = "0x00000200" - register "gpu_pch_backlight" = "0x04000200" + # Set backlight PWM value for eDP + register "gpu_pch_backlight_pwm_hz" = "200" # Enable Panel and configure power delays register "gpu_panel_port_select" = "1" # eDP |