soc/qualcomm: Make sc7180 mdss configurations common code

This change makes mdss configuration common for both sc7180 & sc7280
to avoid code duplicacy.

Changes in v2:
- Move soc related mdss changes to soc specific disp.c

BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49

Change-Id: Ibc43ab6ee5ced08e34625e1485febd2f4717d6a0
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>

1 files changed, 161 insertions, 0 deletions

diff --git a/src/soc/qualcomm/common/display/mdss.c b/src/soc/qualcomm/common/display/mdss.c
new file mode 100644
index 000000000000..1ff923d17bc3
--- /dev/null
+++ b/src/soc/qualcomm/common/display/mdss.c
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/mmio.h>
+#include <console/console.h>
+#include <delay.h>
+#include <edid.h>
+#include <soc/clock.h>
+#include <soc/display/mdssreg.h>
+
+#define MDSS_MDP_MAX_PREFILL_FETCH 24
+
+static void mdss_source_pipe_config(struct edid *edid)
+{
+	uint32_t img_size, out_size, stride;
+	uint32_t fb_off = 0;
+	uint32_t flip_bits = 0;
+	uint32_t src_xy = 0;
+	uint32_t dst_xy = 0;
+
+	/* write active region size*/
+	img_size = (edid->mode.va << 16) | edid->mode.ha;
+	out_size = img_size;
+	stride = (edid->mode.ha * edid->framebuffer_bits_per_pixel/8);
+
+	if (!fb_off) {	/* left */
+		dst_xy = (edid->mode.vborder << 16) | edid->mode.hborder;
+		src_xy = dst_xy;
+	} else {	/* right */
+		dst_xy = (edid->mode.vborder << 16);
+		src_xy = (edid->mode.vborder << 16) | fb_off;
+	}
+
+	printk(BIOS_INFO, "%s: src=%x fb_off=%x src_xy=%x dst_xy=%x\n",
+		   __func__, out_size, fb_off, src_xy, dst_xy);
+
+	write32(&mdp_sspp->sspp_src_ystride0, stride);
+	write32(&mdp_sspp->sspp_src_size, out_size);
+	write32(&mdp_sspp->sspp_out_size, out_size);
+	write32(&mdp_sspp->sspp_src_xy, src_xy);
+	write32(&mdp_sspp->sspp_out_xy, dst_xy);
+
+	/* Tight Packing 4bpp Alpha 8-bit A R B G */
+	write32(&mdp_sspp->sspp_src_format, 0x000236ff);
+	write32(&mdp_sspp->sspp_src_unpack_pattern, 0x03020001);
+
+	flip_bits |= SW_PIX_EXT_OVERRIDE;
+	write32(&mdp_sspp->sspp_sw_pic_ext_c0_req_pixels, out_size);
+	write32(&mdp_sspp->sspp_sw_pic_ext_c1c2_req_pixels, out_size);
+	write32(&mdp_sspp->sspp_sw_pic_ext_c3_req_pixels, out_size);
+	write32(&mdp_sspp->sspp_src_op_mode, flip_bits);
+}
+
+static void mdss_vbif_setup(void)
+{
+	write32(&vbif_rt->vbif_out_axi_amemtype_conf0, 0x33333333);
+	write32(&vbif_rt->vbif_out_axi_amemtype_conf1, 0x00333333);
+}
+
+static void mdss_intf_fetch_start_config(struct edid *edid)
+{
+	uint32_t v_total, h_total, fetch_start, vfp_start;
+	uint32_t prefetch_avail, prefetch_needed;
+	uint32_t fetch_enable = PROG_FETCH_START_EN;
+
+	/*
+	 * MDP programmable fetch is for MDP with rev >= 1.05.
+	 * Programmable fetch is not needed if vertical back porch
+	 * plus vertical pulse width plus extra line for the extra h_total
+	 * added during fetch start is >= 24.
+	 */
+	if ((edid->mode.vbl - edid->mode.vso + 1) >= MDSS_MDP_MAX_PREFILL_FETCH)
+		return;
+
+	/*
+	 * Fetch should always be outside the active lines. If the fetching
+	 * is programmed within active region, hardware behavior is unknown.
+	 */
+	v_total = edid->mode.va + edid->mode.vbl;
+	h_total = edid->mode.ha + edid->mode.hbl;
+	vfp_start = edid->mode.va + edid->mode.vbl - edid->mode.vso;
+	prefetch_avail = v_total - vfp_start;
+	prefetch_needed = MDSS_MDP_MAX_PREFILL_FETCH - edid->mode.vbl + edid->mode.vso;
+
+	/*
+	 * In some cases, vertical front porch is too high. In such cases limit
+	 * the mdp fetch lines  as the last (25 - vbp - vpw) lines of
+	 * vertical front porch.
+	 */
+	if (prefetch_avail > prefetch_needed)
+		prefetch_avail = prefetch_needed;
+
+	fetch_start = (v_total - prefetch_avail) * h_total + h_total + 1;
+	write32(&mdp_intf->intf_prof_fetch_start, fetch_start);
+	write32(&mdp_intf->intf_config, fetch_enable);
+}
+
+static void mdss_layer_mixer_setup(struct edid *edid)
+{
+	uint32_t mdp_rgb_size;
+	uint32_t left_staging_level;
+
+	/* write active region size*/
+	mdp_rgb_size = (edid->mode.va << 16) | edid->mode.ha;
+
+	write32(&mdp_layer_mixer->layer_out_size, mdp_rgb_size);
+	write32(&mdp_layer_mixer->layer_op_mode, 0x0);
+	for (int i = 0; i < 6; i++) {
+		write32(&mdp_layer_mixer->layer_blend[i].layer_blend_op, 0x100);
+		write32(&mdp_layer_mixer->layer_blend[i].layer_blend_const_alpha, 0x00ff0000);
+	}
+
+	/* Enable border fill */
+	left_staging_level = BORDER_OUT;
+	left_staging_level |= VIG_0_OUT;
+
+	/* Base layer for layer mixer 0 */
+	write32(&mdp_ctl->ctl_layer0, left_staging_level);
+}
+
+static void mdss_vbif_qos_remapper_setup(void)
+{
+	/*
+	 * VBIF remapper registers are used for translating internal display hardware
+	 * priority level (from 0 to 7) into system fabric priority level.
+	 * These remapper settings are defined for all the clients which corresponds
+	 * to the xin clients connected to SSPP on VBIF.
+	 */
+	write32(&vbif_rt->qos_rp_remap[0].vbif_xinl_qos_rp_remap, 0x00000003);
+	write32(&vbif_rt->qos_rp_remap[1].vbif_xinl_qos_rp_remap, 0x11111113);
+	write32(&vbif_rt->qos_rp_remap[2].vbif_xinl_qos_rp_remap, 0x22222224);
+	write32(&vbif_rt->qos_rp_remap[3].vbif_xinl_qos_rp_remap, 0x33333334);
+	write32(&vbif_rt->qos_rp_remap[4].vbif_xinl_qos_rp_remap, 0x44444445);
+	write32(&vbif_rt->qos_rp_remap[7].vbif_xinl_qos_rp_remap, 0x77777776);
+	write32(&vbif_rt->qos_lvl_remap[0].vbif_xinl_qos_lvl_remap, 0x00000003);
+	write32(&vbif_rt->qos_lvl_remap[1].vbif_xinl_qos_lvl_remap, 0x11111113);
+	write32(&vbif_rt->qos_lvl_remap[2].vbif_xinl_qos_lvl_remap, 0x22222224);
+	write32(&vbif_rt->qos_lvl_remap[3].vbif_xinl_qos_lvl_remap, 0x33333334);
+	write32(&vbif_rt->qos_lvl_remap[4].vbif_xinl_qos_lvl_remap, 0x44444445);
+	write32(&vbif_rt->qos_lvl_remap[5].vbif_xinl_qos_lvl_remap, 0x77777776);
+}
+
+void mdp_dsi_video_config(struct edid *edid)
+{
+	mdss_intf_tg_setup(edid);
+	mdss_intf_fetch_start_config(edid);
+	mdss_vbif_setup();
+	mdss_vbif_qos_remapper_setup();
+	mdss_source_pipe_config(edid);
+	mdss_layer_mixer_setup(edid);
+	mdss_ctrl_config();
+	write32(&mdp_intf->intf_mux, 0x0F0000);
+}
+
+void mdp_dsi_video_on(void)
+{
+	uint32_t ctl0_reg_val;
+
+	ctl0_reg_val = VIG_0 | LAYER_MIXER_0 | CTL | INTF;
+	write32(&mdp_ctl->ctl_intf_flush, INTF_FLUSH);
+	write32(&mdp_ctl->ctl_flush, ctl0_reg_val);
+}