mainboard/ocp/monolake: Hide IIO root ports before memory init

It turned on some SKUs FSP hangs in Notify stage if IIO root ports are
disabled after MemoryInit. To address that hide IIO root ports earlier
in romstage.

TEST=the patch was ran on affected HW and success was reported

Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

4 files changed, 45 insertions, 24 deletions

diff --git a/src/soc/intel/fsp_broadwell_de/include/soc/ubox.h b/src/soc/intel/fsp_broadwell_de/include/soc/ubox.h
index baaeac55cbce..3c2e6f50a6ff 100644
--- a/src/soc/intel/fsp_broadwell_de/include/soc/ubox.h
+++ b/src/soc/intel/fsp_broadwell_de/include/soc/ubox.h
@@ -40,6 +40,5 @@
 
 #define UBOX_DEVHIDE0			0xb0
 
-void iio_hide(const uint8_t devno, const uint8_t funcno);
-
+void iio_hide(DEVTREE_CONST struct device *dev);
 #endif
diff --git a/src/soc/intel/fsp_broadwell_de/romstage/romstage.c b/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
index b0fad3f02bf4..8438b1035c93 100644
--- a/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
+++ b/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
@@ -94,6 +94,37 @@ static void enable_integrated_uart(uint8_t port)
 	pci_mmio_write_config32(ubox_dev, UBOX_UART_ENABLE, ubox_uart_en);
 }
 
+static void early_iio_hide(void)
+{
+	DEVTREE_CONST struct device *dev;
+
+	const pci_devfn_t iio_rootport[] = {
+		PCI_DEVFN(PCIE_IIO_PORT_1_DEV, PCIE_IIO_PORT_1A_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_1_DEV, PCIE_IIO_PORT_1B_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_2_DEV, PCIE_IIO_PORT_2A_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_2_DEV, PCIE_IIO_PORT_2B_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_2_DEV, PCIE_IIO_PORT_2C_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_2_DEV, PCIE_IIO_PORT_2D_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_3_DEV, PCIE_IIO_PORT_3A_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_3_DEV, PCIE_IIO_PORT_3B_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_3_DEV, PCIE_IIO_PORT_3C_FUNC),
+		PCI_DEVFN(PCIE_IIO_PORT_3_DEV, PCIE_IIO_PORT_3D_FUNC),
+		};
+
+	/* Walk through IIO root ports and hide if it is disabled in devtree */
+	for (int i = 0; i < ARRAY_SIZE(iio_rootport); i++) {
+		dev = pcidev_path_on_bus(BUS0, iio_rootport[i]);
+		if (dev && !dev->enabled) {
+			printk(BIOS_DEBUG, "Hiding IIO root port: %d:%d.%d\n",
+					BUS0,
+					PCI_SLOT(iio_rootport[i]),
+					PCI_FUNC(iio_rootport[i]));
+			iio_hide(dev);
+		}
+	}
+
+}
+
 /* Entry from cache-as-ram.inc. */
 void *asmlinkage main(FSP_INFO_HEADER *fsp_info_header)
 {
@@ -121,14 +152,15 @@ void *asmlinkage main(FSP_INFO_HEADER *fsp_info_header)
 	init_rtc();
 	setup_gpio_io_address();
 
+	/* Hide before MemoryInit since hiding later seems to break FSP */
+	early_iio_hide();
 	timestamp_add_now(TS_BEFORE_INITRAM);
-
+	post_code(0x48);
 	/*
 	 * Call early init to initialize memory and chipset. This function returns
 	 * to the romstage_main_continue function with a pointer to the HOB
 	 * structure.
 	 */
-	post_code(0x48);
 	printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n");
 	fsp_early_init(fsp_info_header);
 	die_with_post_code(POST_INVALID_VENDOR_BINARY,
diff --git a/src/soc/intel/fsp_broadwell_de/southcluster.c b/src/soc/intel/fsp_broadwell_de/southcluster.c
index d1981fd75bac..fb8af87b625e 100644
--- a/src/soc/intel/fsp_broadwell_de/southcluster.c
+++ b/src/soc/intel/fsp_broadwell_de/southcluster.c
@@ -257,24 +257,11 @@ void southcluster_enable_dev(struct device *dev)
 	const int slot = PCI_SLOT(dev->path.pci.devfn);
 	const int func = PCI_FUNC(dev->path.pci.devfn);
 
-	switch (slot) {
-	case PCIE_IIO_PORT_0_DEV:
-		die("should not hide PCH link");
-	case PCIE_IIO_PORT_1_DEV: /* fallthrough */
-	case PCIE_IIO_PORT_2_DEV: /* fallthrough */
-	case PCIE_IIO_PORT_3_DEV: /* fallthrough */
-		printk(BIOS_DEBUG, "%s: Disabling IOU bridge %02x.%01x\n", dev_path(dev), slot,
-			func);
-		iio_hide(slot, func);
-		break;
-	default:
-		printk(BIOS_DEBUG, "%s: Disabling device: %02x.%01x\n", dev_path(dev), slot,
-			func);
-		/* Ensure memory, io, and bus master are all disabled */
-		reg32 = pci_read_config32(dev, PCI_COMMAND);
-		reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-		pci_write_config32(dev, PCI_COMMAND, reg32);
-	}
+	printk(BIOS_DEBUG, "%s: Disabling device: %02x.%01x\n", dev_path(dev), slot, func);
+	/* Ensure memory, io, and bus master are all disabled */
+	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+	pci_write_config32(dev, PCI_COMMAND, reg32);
 }
 
 #if CONFIG(HAVE_ACPI_TABLES)
diff --git a/src/soc/intel/fsp_broadwell_de/ubox.c b/src/soc/intel/fsp_broadwell_de/ubox.c
index d7352ad6677e..e3e55e0624a2 100644
--- a/src/soc/intel/fsp_broadwell_de/ubox.c
+++ b/src/soc/intel/fsp_broadwell_de/ubox.c
@@ -18,10 +18,13 @@
 #include <stdint.h>
 #include <soc/ubox.h>
 
-void iio_hide(const uint8_t devno, const uint8_t funcno)
+void iio_hide(DEVTREE_CONST struct device *dev)
 {
 	pci_devfn_t ubox_dev;
+	uint8_t slot, func;
 
+	slot = PCI_SLOT(dev->path.pci.devfn);
+	func = PCI_FUNC(dev->path.pci.devfn);
 	ubox_dev = PCI_DEV(get_busno1(), UBOX_DEV, UBOX_FUNC);
-	pci_or_config32(ubox_dev, UBOX_DEVHIDE0 + funcno * 4, 1 << devno);
+	pci_or_config32(ubox_dev, UBOX_DEVHIDE0 + func * 4, 1 << slot);
 }