Remove FSP Rangeley SOC and mohonpeak board support

mohonpeak is the reference board for Rangeley. I doubt anyone uses it
or cares about it. We jokingly refer to it as "Moron Peak". It's code
with no known users, so we shouldn't be hauling it around for the
eventuality that someone might use it in the future.

Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11790
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>

1 files changed, 0 insertions, 753 deletions

diff --git a/src/southbridge/intel/fsp_rangeley/spi.c b/src/southbridge/intel/fsp_rangeley/spi.c
deleted file mode 100644
index 8a4eabce3c48..000000000000
--- a/src/southbridge/intel/fsp_rangeley/spi.c
+++ /dev/null
@@ -1,753 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (C) 2013, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* This file is derived from the flashrom project. */
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <delay.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-
-#include <spi-generic.h>
-
-static int ich_status_poll(u16 bitmask, int wait_til_set);
-
-#ifdef __SMM__
-#include <arch/pci_mmio_cfg.h>
-#define pci_read_config_byte(dev, reg, targ)\
-	*(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
-	*(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
-	*(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
-	pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
-	pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
-	pci_write_config32(dev, reg, val)
-#else /* !__SMM__ */
-#include <device/device.h>
-#include <device/pci.h>
-#define pci_read_config_byte(dev, reg, targ)\
-	*(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
-	*(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
-	*(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
-	pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
-	pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
-	pci_write_config32(dev, reg, val)
-#endif /* !__SMM__ */
-
-typedef struct spi_slave ich_spi_slave;
-
-static int ichspi_lock = 0;
-
-typedef struct ich7_spi_regs {
-	uint16_t spis;
-	uint16_t spic;
-	uint32_t spia;
-	uint64_t spid[8];
-	uint64_t _pad;
-	uint32_t bbar;
-	uint16_t preop;
-	uint16_t optype;
-	uint8_t opmenu[8];
-} __attribute__((packed)) ich7_spi_regs;
-
-typedef struct ich9_spi_regs {
-	uint32_t bfpr;                  // 0
-	uint16_t hsfs;                  // 4
-	uint16_t hsfc;                  // 6
-	uint32_t faddr;                 // 8
-	uint32_t _reserved0;            // 0xC
-	uint32_t fdata[16];             // 0x10
-	uint32_t frap;                  // 0x50
-	uint32_t freg[5];               // 0x54
-	uint32_t _reserved1[3];         // 0x67
-	uint32_t pr[5];                 // 0x74
-	uint32_t _reserved2[2];         // 0x88
-	uint8_t ssfs;                   // 0x90
-	uint8_t ssfc[3];                // 0x91
-	uint16_t preop;                 // 0x94
-	uint16_t optype;                // 0x96
-	uint8_t opmenu[8];              // 0x98
-	uint32_t bbar;                  // 0xB0
-	uint8_t _reserved3[12];
-	uint32_t fdoc;
-	uint32_t fdod;
-	uint8_t _reserved4[8];
-	uint32_t afc;
-	uint32_t lvscc;
-	uint32_t uvscc;
-	uint8_t _reserved5[4];
-	uint32_t fpb;
-	uint8_t _reserved6[28];
-	uint32_t srdl;
-	uint32_t srdc;
-	uint32_t srd;
-} __attribute__((packed)) ich9_spi_regs;
-
-typedef struct ich10_spi_regs {
-	uint32_t bfpr;
-	uint16_t hsfs;
-	uint16_t hsfc;
-	uint32_t faddr;
-	uint32_t _reserved0;
-	uint32_t fdata[16];
-	uint32_t fracc;
-	uint32_t freg[5];
-	uint32_t _reserved1[3];
-	uint32_t pr[5];
-	uint32_t _reserved2[2];
-	uint8_t ssfs;
-	uint8_t ssfc[3];
-	uint16_t preop;
-	uint16_t optype;
-	uint8_t opmenu[8];
-	uint8_t _reserved3[16];
-	uint32_t fdoc;
-	uint32_t fdod;
-	uint8_t _reserved4[8];
-	uint32_t afc;
-	uint32_t lvscc;
-	uint32_t uvscc;
-	uint8_t _reserved5[4];
-	uint32_t fpb;
-	uint8_t _reserved6[36];
-	uint32_t scs;
-	uint32_t bcr;
-	uint32_t tcgc;
-} __attribute__((packed)) ich10_spi_regs;
-
-typedef struct ich_spi_controller {
-	int locked;
-
-	uint8_t *opmenu;
-	int menubytes;
-	uint16_t *preop;
-	uint16_t *optype;
-	uint32_t *addr;
-	uint8_t *data;
-	unsigned databytes;
-	uint8_t *status;
-	uint16_t *control;
-	uint32_t *bbar;
-	uint8_t *bcr;
-} ich_spi_controller;
-
-static ich_spi_controller cntlr;
-
-enum {
-	SPIS_SCIP =		0x0001,
-	SPIS_GRANT =		0x0002,
-	SPIS_CDS =		0x0004,
-	SPIS_FCERR =		0x0008,
-	SSFS_AEL =		0x0010,
-	SPIS_LOCK =		0x8000,
-	SPIS_RESERVED_MASK =	0x7ff0,
-	SSFS_RESERVED_MASK =	0x7fe2
-};
-
-enum {
-	SPIC_SCGO =		0x000002,
-	SPIC_ACS =		0x000004,
-	SPIC_SPOP =		0x000008,
-	SPIC_DBC =		0x003f00,
-	SPIC_DS =		0x004000,
-	SPIC_SME =		0x008000,
-	SSFC_SCF_MASK =		0x070000,
-	SSFC_RESERVED =		0xf80000
-};
-
-enum {
-	HSFS_FDONE =		0x0001,
-	HSFS_FCERR =		0x0002,
-	HSFS_AEL =		0x0004,
-	HSFS_BERASE_MASK =	0x0018,
-	HSFS_BERASE_SHIFT =	3,
-	HSFS_SCIP =		0x0020,
-	HSFS_FDOPSS =		0x2000,
-	HSFS_FDV =		0x4000,
-	HSFS_FLOCKDN =		0x8000
-};
-
-enum {
-	HSFC_FGO =		0x0001,
-	HSFC_FCYCLE_MASK =	0x0006,
-	HSFC_FCYCLE_SHIFT =	1,
-	HSFC_FDBC_MASK =	0x3f00,
-	HSFC_FDBC_SHIFT =	8,
-	HSFC_FSMIE =		0x8000
-};
-
-enum {
-	BCR_BIOSWE =		0x0001,
-	BCR_BLE =		0x0002,
-	BCR_SRC_MASK =		0x000c,
-	BCR_SRC_SHIFT =		0x0002,
-	BCR_SRC_NO_PREF =		0x0000,
-	BCR_SRC_NO_PREF_CACHE =		0x0004,
-	BCR_SRC_EN_PREF_CACHE =		0x0008,
-	BCR_TSS =		0x0010,
-	BCR_SMMBWP =		0x0020,
-	BCR_RESERVED_MASK =	0xffc0
-};
-
-enum {
-	SPI_OPCODE_TYPE_READ_NO_ADDRESS =	0,
-	SPI_OPCODE_TYPE_WRITE_NO_ADDRESS =	1,
-	SPI_OPCODE_TYPE_READ_WITH_ADDRESS =	2,
-	SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS =	3,
-};
-
-#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
-
-static u8 readb_(const void *addr)
-{
-	u8 v = read8(addr);
-	printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
-	       v, ((unsigned) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static u16 readw_(const void *addr)
-{
-	u16 v = read16(addr);
-	printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
-	       v, ((unsigned) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static u32 readl_(const void *addr)
-{
-	u32 v = read32(addr);
-	printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
-	       v, ((unsigned) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static void writeb_(u8 b, const void *addr)
-{
-	write8(addr, b);
-	printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
-	       b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writew_(u16 b, const void *addr)
-{
-	write16(addr, b);
-	printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
-	       b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writel_(u32 b, const void *addr)
-{
-	write32((unsigned long)addr, b);
-	printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
-	       b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled  vvv NOT enabled */
-
-#define readb_(a) read8(a)
-#define readw_(a) read16(a)
-#define readl_(a) read32(a)
-#define writeb_(val, addr) write8(addr, val)
-#define writew_(val, addr) write16(addr, val)
-#define writel_(val, addr) write32(addr, val)
-
-#endif  /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
-	const uint8_t *bvalue = value;
-	uint8_t *bdest = dest;
-
-	while (size >= 4) {
-		writel_(*(const uint32_t *)bvalue, bdest);
-		bdest += 4; bvalue += 4; size -= 4;
-	}
-	while (size) {
-		writeb_(*bvalue, bdest);
-		bdest++; bvalue++; size--;
-	}
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
-	const uint8_t *bsrc = src;
-	uint8_t *bvalue = value;
-
-	while (size >= 4) {
-		*(uint32_t *)bvalue = readl_(bsrc);
-		bsrc += 4; bvalue += 4; size -= 4;
-	}
-	while (size) {
-		*bvalue = readb_(bsrc);
-		bsrc++; bvalue++; size--;
-	}
-}
-
-static void ich_set_bbar(uint32_t minaddr)
-{
-	const uint32_t bbar_mask = 0x00ffff00;
-	uint32_t ichspi_bbar;
-
-	if (cntlr.bbar == NULL)
-		return;
-
-	minaddr &= bbar_mask;
-	ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
-	ichspi_bbar |= minaddr;
-	writel_(ichspi_bbar, cntlr.bbar);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
-{
-	ich_spi_slave *slave = malloc(sizeof(*slave));
-
-	if (!slave) {
-		printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n");
-		return NULL;
-	}
-
-	memset(slave, 0, sizeof(*slave));
-
-	slave->bus = bus;
-	slave->cs = cs;
-	return slave;
-}
-
-/*
- * Check if this device ID matches one of supported Intel SOC devices.
- *
- * Return the ICH version if there is a match, or zero otherwise.
- */
-static inline int get_ich_version(uint16_t device_id)
-{
-
-	if ((device_id >= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MIN &&
-	     device_id <= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MAX))
-		return 10;
-
-	return 0;
-}
-
-void spi_init(void)
-{
-	int ich_version = 0;
-	uint8_t bios_cntl;
-	device_t dev;
-	uint32_t ids;
-	uint16_t vendor_id, device_id;
-
-#ifdef __SMM__
-	dev = PCI_DEV(0, 31, 0);
-#else
-	dev = dev_find_slot(0, PCI_DEVFN(31, 0));
-#endif
-	pci_read_config_dword(dev, 0, &ids);
-	vendor_id = ids;
-	device_id = (ids >> 16);
-
-	if (vendor_id != PCI_VENDOR_ID_INTEL) {
-		printk(BIOS_DEBUG, "SPI: No SOC found.\n");
-		return;
-	}
-
-	ich_version = get_ich_version(device_id);
-
-	if (!ich_version) {
-		printk(BIOS_DEBUG, "SPI: No known SOC found.\n");
-		return;
-	}
-
-	switch (ich_version) {
-	case 10:
-		{
-			uint8_t *spibase; /* SPI Base Address */
-			uint32_t sbase; /* SPI Base Address Register */
-			pci_read_config_dword(dev, 0x54, &sbase);
-			/* Bits 31-9 are the base address, 8-4 are reserved, 3-0 are used. */
-			spibase = (uint8_t *)(sbase & 0xffffff00);
-			ich10_spi_regs *ich10_spi =
-				(ich10_spi_regs *)(spibase);
-			ichspi_lock = readw_(&ich10_spi->hsfs) & HSFS_FLOCKDN;
-			cntlr.opmenu = ich10_spi->opmenu;
-			cntlr.menubytes = sizeof(ich10_spi->opmenu);
-			cntlr.optype = &ich10_spi->optype;
-			cntlr.addr = &ich10_spi->faddr;
-			cntlr.data = (uint8_t *)ich10_spi->fdata;
-			cntlr.databytes = sizeof(ich10_spi->fdata);
-			cntlr.status = &ich10_spi->ssfs;
-			cntlr.control = (uint16_t *)ich10_spi->ssfc;
-			cntlr.bbar = NULL;
-			cntlr.preop = &ich10_spi->preop;
-			cntlr.bcr = (uint8_t *)&ich10_spi->bcr;
-			break;
-		}
-	default:
-		printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version);
-	}
-
-	ich_set_bbar(0);
-
-	/* Disable the BIOS write protect so write commands are allowed. */
-	switch (ich_version) {
-	case 10:
-		{
-			/* Deassert SMM BIOS write protect(SMM BWP) and assert enable flash write(BIOSWE) */
-			bios_cntl = readb_(cntlr.bcr);
-			bios_cntl &= ~BCR_SMMBWP;
-			bios_cntl |= BCR_BIOSWE;
-			writeb_(bios_cntl, cntlr.bcr);
-			break;
-		}
-
-	default:
-		break;
-	}
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	/* Handled by ICH automatically. */
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-	/* Handled by ICH automatically. */
-}
-
-typedef struct spi_transaction {
-	const uint8_t *out;
-	uint32_t bytesout;
-	uint8_t *in;
-	uint32_t bytesin;
-	uint8_t type;
-	uint8_t opcode;
-	uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned bytes)
-{
-	trans->out += bytes;
-	trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned bytes)
-{
-	trans->in += bytes;
-	trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
-	trans->type = 0xFF;
-
-	/* Try to guess spi type from read/write sizes. */
-	if (trans->bytesin == 0) {
-		if (trans->bytesout > 4)
-			/*
-			 * If bytesin = 0 and bytesout > 4, we presume this is
-			 * a write data operation, which is accompanied by an
-			 * address.
-			 */
-			trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
-		else
-			trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
-		return;
-	}
-
-	if (trans->bytesout == 1) { /* and bytesin is > 0 */
-		trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
-		return;
-	}
-
-	if (trans->bytesout == 4) { /* and bytesin is > 0 */
-		trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
-	}
-
-	/* Fast read command is called with 5 bytes instead of 4 */
-	if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
-		trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
-		--trans->bytesout;
-	}
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
-	uint16_t optypes;
-	uint8_t opmenu[cntlr.menubytes];
-
-	trans->opcode = trans->out[0];
-	spi_use_out(trans, 1);
-	if (!ichspi_lock) {
-		/* The lock is off, so just use index 0. */
-		writeb_(trans->opcode, cntlr.opmenu);
-		optypes = readw_(cntlr.optype);
-		optypes = (optypes & 0xfffc) | (trans->type & 0x3);
-		writew_(optypes, cntlr.optype);
-		return 0;
-	} else {
-		/* The lock is on. See if what we need is on the menu. */
-		uint8_t optype;
-		uint16_t opcode_index;
-
-		/* Write Enable is handled as atomic prefix */
-		if (trans->opcode == SPI_OPCODE_WREN)
-			return 0;
-
-		read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
-		for (opcode_index = 0; opcode_index < cntlr.menubytes;
-				opcode_index++) {
-			if (opmenu[opcode_index] == trans->opcode)
-				break;
-		}
-
-		if (opcode_index == cntlr.menubytes) {
-			printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
-				trans->opcode);
-			return -1;
-		}
-
-		optypes = readw_(cntlr.optype);
-		optype = (optypes >> (opcode_index * 2)) & 0x3;
-		if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
-			optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
-			trans->bytesout >= 3) {
-			/* We guessed wrong earlier. Fix it up. */
-			trans->type = optype;
-		}
-		if (optype != trans->type) {
-			printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
-				optype);
-			return -1;
-		}
-		return opcode_index;
-	}
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
-	/* Separate the SPI address and data. */
-	switch (trans->type) {
-	case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
-	case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
-		return 0;
-	case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
-	case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
-		trans->offset = ((uint32_t)trans->out[0] << 16) |
-				((uint32_t)trans->out[1] << 8) |
-				((uint32_t)trans->out[2] << 0);
-		spi_use_out(trans, 3);
-		return 1;
-	default:
-		printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
-		return -1;
-	}
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(u16 bitmask, int wait_til_set)
-{
-	int timeout = 60000; /* This will result in 600 ms */
-	u16 status = 0;
-
-	while (timeout--) {
-		status = readw_(cntlr.status);
-		if (wait_til_set ^ ((status & bitmask) == 0)) {
-			if (wait_til_set)
-				writew_((status & bitmask), cntlr.status);
-			return status;
-		}
-		udelay(10);
-	}
-
-	printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
-		status, bitmask);
-	return -1;
-}
-
-unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len)
-{
-	return min(cntlr.databytes, buf_len);
-}
-
-int spi_xfer(struct spi_slave *slave, const void *dout,
-		unsigned int bytesout, void *din, unsigned int bytesin)
-{
-	uint16_t control;
-	int16_t opcode_index;
-	int with_address;
-	int status;
-
-	spi_transaction trans = {
-		dout, bytesout,
-		din, bytesin,
-		0xff, 0xff, 0
-	};
-
-	/* There has to always at least be an opcode. */
-	if (!bytesout || !dout) {
-		printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
-		return -1;
-	}
-	/* Make sure if we read something we have a place to put it. */
-	if (bytesin != 0 && !din) {
-		printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
-		return -1;
-	}
-
-	if (ich_status_poll(SPIS_SCIP, 0) == -1)
-		return -1;
-
-	writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
-
-	spi_setup_type(&trans);
-	if ((opcode_index = spi_setup_opcode(&trans)) < 0)
-		return -1;
-	if ((with_address = spi_setup_offset(&trans)) < 0)
-		return -1;
-
-	if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) {
-		/*
-		 * Treat Write Enable as Atomic Pre-Op if possible
-		 * in order to prevent the Management Engine from
-		 * issuing a transaction between WREN and DATA.
-		 */
-		writew_(trans.opcode, cntlr.preop);
-		return 0;
-	}
-
-	/* Preset control fields */
-	control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
-	/* Issue atomic preop cycle if needed */
-	if (readw_(cntlr.preop))
-		control |= SPIC_ACS;
-
-	if (!trans.bytesout && !trans.bytesin) {
-		/* SPI addresses are 24 bit only */
-		if (with_address)
-			writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
-		/*
-		 * This is a 'no data' command (like Write Enable), its
-		 * bitesout size was 1, decremented to zero while executing
-		 * spi_setup_opcode() above. Tell the chip to send the
-		 * command.
-		 */
-		writew_(control, cntlr.control);
-
-		/* wait for the result */
-		status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
-		if (status == -1)
-			return -1;
-
-		if (status & SPIS_FCERR) {
-			printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
-			return -1;
-		}
-
-		goto spi_xfer_exit;
-	}
-
-	/*
-	 * Check if this is a write command attempting to transfer more bytes
-	 * than the controller can handle. Iterations for writes are not
-	 * supported here because each SPI write command needs to be preceded
-	 * and followed by other SPI commands, and this sequence is controlled
-	 * by the SPI chip driver.
-	 */
-	if (trans.bytesout > cntlr.databytes) {
-		printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
-		     " spi_crop_chunk()?\n");
-		return -1;
-	}
-
-	/*
-	 * Read or write up to databytes bytes at a time until everything has
-	 * been sent.
-	 */
-	while (trans.bytesout || trans.bytesin) {
-		uint32_t data_length;
-
-		/* SPI addresses are 24 bit only */
-		writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
-		if (trans.bytesout)
-			data_length = min(trans.bytesout, cntlr.databytes);
-		else
-			data_length = min(trans.bytesin, cntlr.databytes);
-
-		/* Program data into FDATA0 to N */
-		if (trans.bytesout) {
-			write_reg(trans.out, cntlr.data, data_length);
-			spi_use_out(&trans, data_length);
-			if (with_address)
-				trans.offset += data_length;
-		}
-
-		/* Add proper control fields' values */
-		control &= ~((cntlr.databytes - 1) << 8);
-		control |= SPIC_DS;
-		control |= (data_length - 1) << 8;
-
-		/* write it */
-		writew_(control, cntlr.control);
-
-		/* Wait for Cycle Done Status or Flash Cycle Error. */
-		status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
-		if (status == -1)
-			return -1;
-
-		if (status & SPIS_FCERR) {
-			printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
-			return -1;
-		}
-
-		if (trans.bytesin) {
-			read_reg(cntlr.data, trans.in, data_length);
-			spi_use_in(&trans, data_length);
-			if (with_address)
-				trans.offset += data_length;
-		}
-	}
-
-spi_xfer_exit:
-	/* Clear atomic preop now that xfer is done */
-	writew_(0, cntlr.preop);
-
-	return 0;
-}