sb/intel/*: Use common SMBus functions

All Intel southbridges implement the same SMBus functions.
This patch replaces all these similar and mostly identical
implementations with a common file.

This also makes i2c block read available to all those southbridges.
If the northbridge has to read a lot of SPD bytes sequentially, using
this function can reduce the time being spent to read SPD five-fold.

Change-Id: I93bb186e04e8c32dff04fc1abe4b5ecbc4c9c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

5 files changed, 3 insertions, 259 deletions

diff --git a/src/southbridge/intel/ibexpeak/Kconfig b/src/southbridge/intel/ibexpeak/Kconfig
index ad32a9bde0e2..41ace46f7fcd 100644
--- a/src/southbridge/intel/ibexpeak/Kconfig
+++ b/src/southbridge/intel/ibexpeak/Kconfig
@@ -30,6 +30,7 @@ config SOUTH_BRIDGE_OPTIONS # dummy
 	select PCIEXP_COMMON_CLOCK
 	select SPI_FLASH
 	select SOUTHBRIDGE_INTEL_COMMON
+	select SOUTHBRIDGE_INTEL_COMMON_SMBUS
 	select HAVE_USBDEBUG_OPTIONS
 	select COMMON_FADT
 	select ACPI_SATA_GENERATOR
diff --git a/src/southbridge/intel/ibexpeak/early_smbus.c b/src/southbridge/intel/ibexpeak/early_smbus.c
index f3dab8d00f84..b7823ebf590d 100644
--- a/src/southbridge/intel/ibexpeak/early_smbus.c
+++ b/src/southbridge/intel/ibexpeak/early_smbus.c
@@ -18,8 +18,8 @@
 #include <console/console.h>
 #include <device/pci_ids.h>
 #include <device/pci_def.h>
+#include <southbridge/intel/common/smbus.h>
 #include "pch.h"
-#include "smbus.h"
 
 void enable_smbus(void)
 {
diff --git a/src/southbridge/intel/ibexpeak/pch.h b/src/southbridge/intel/ibexpeak/pch.h
index 63307d93687a..1898ae3dba0b 100644
--- a/src/southbridge/intel/ibexpeak/pch.h
+++ b/src/southbridge/intel/ibexpeak/pch.h
@@ -233,22 +233,6 @@ void southbridge_configure_default_intmap(void);
 #define SMB_SMI_EN		(1 << 1)
 #define HST_EN			(1 << 0)
 
-/* SMBus I/O bits. */
-#define SMBHSTSTAT		0x0
-#define SMBHSTCTL		0x2
-#define SMBHSTCMD		0x3
-#define SMBXMITADD		0x4
-#define SMBHSTDAT0		0x5
-#define SMBHSTDAT1		0x6
-#define SMBBLKDAT		0x7
-#define SMBTRNSADD		0x9
-#define SMBSLVDATA		0xa
-#define SMLINK_PIN_CTL		0xe
-#define SMBUS_PIN_CTL		0xf
-
-#define SMBUS_TIMEOUT		(10 * 1000 * 100)
-
-
 /* Southbridge IO BARs */
 
 #define GPIOBASE		0x48
diff --git a/src/southbridge/intel/ibexpeak/smbus.c b/src/southbridge/intel/ibexpeak/smbus.c
index 3b2f18c08e70..aea52de7b5e8 100644
--- a/src/southbridge/intel/ibexpeak/smbus.c
+++ b/src/southbridge/intel/ibexpeak/smbus.c
@@ -22,8 +22,8 @@
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
 #include <arch/io.h>
+#include <southbridge/intel/common/smbus.h>
 #include "pch.h"
-#include "smbus.h"
 
 static void pch_smbus_init(device_t dev)
 {
diff --git a/src/southbridge/intel/ibexpeak/smbus.h b/src/southbridge/intel/ibexpeak/smbus.h
deleted file mode 100644
index 0815bf4f146b..000000000000
--- a/src/southbridge/intel/ibexpeak/smbus.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
- * Copyright (C) 2009 coresystems GmbH
- * Copyright (C) 2013 Vladimir Serbinenko
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/smbus_def.h>
-#include "pch.h"
-
-static void smbus_delay(void)
-{
-	inb(0x80);
-}
-
-static int smbus_wait_until_ready(u16 smbus_base)
-{
-	unsigned loops = SMBUS_TIMEOUT;
-	unsigned char byte;
-	do {
-		smbus_delay();
-		if (--loops == 0)
-			break;
-		byte = inb(smbus_base + SMBHSTSTAT);
-	} while (byte & 1);
-	return loops ? 0 : -1;
-}
-
-static int smbus_wait_until_done(u16 smbus_base)
-{
-	unsigned loops = SMBUS_TIMEOUT;
-	unsigned char byte;
-	do {
-		smbus_delay();
-		if (--loops == 0)
-			break;
-		byte = inb(smbus_base + SMBHSTSTAT);
-	} while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
-	return loops ? 0 : -1;
-}
-
-static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
-{
-	unsigned char global_status_register;
-	unsigned char byte;
-
-	if (smbus_wait_until_ready(smbus_base) < 0) {
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-	}
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(address & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a byte data read */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* Clear the data byte... */
-	outb(0, smbus_base + SMBHSTDAT0);
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	/* Poll for transaction completion */
-	if (smbus_wait_until_done(smbus_base) < 0) {
-		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
-	}
-
-	global_status_register = inb(smbus_base + SMBHSTSTAT);
-
-	/* Ignore the "In Use" status... */
-	global_status_register &= ~(3 << 5);
-
-	/* Read results of transaction */
-	byte = inb(smbus_base + SMBHSTDAT0);
-	if (global_status_register != (1 << 1)) {
-		return SMBUS_ERROR;
-	}
-	return byte;
-}
-
-static  int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data)
-{
-	unsigned char global_status_register;
-
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(address & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a byte data read */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* Clear the data byte... */
-	outb(data, smbus_base + SMBHSTDAT0);
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	/* Poll for transaction completion */
-	if (smbus_wait_until_done(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
-
-	global_status_register = inb(smbus_base + SMBHSTSTAT);
-
-	/* Ignore the "In Use" status... */
-	global_status_register &= ~(3 << 5);
-
-	/* Read results of transaction */
-	if (global_status_register != (1 << 1))
-		return SMBUS_ERROR;
-
-	return 0;
-}
-
-#ifdef __PRE_RAM__
-
-static int do_smbus_block_write(unsigned smbus_base, unsigned device,
-			      unsigned cmd, unsigned bytes, const u8 *buf)
-{
-	u8 status;
-
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(cmd & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a block data write */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* set number of bytes to transfer */
-	outb(bytes, smbus_base + SMBHSTDAT0);
-
-	outb(*buf++, smbus_base + SMBBLKDAT);
-	bytes--;
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	while (!(inb(smbus_base + SMBHSTSTAT) & 1));
-	/* Poll for transaction completion */
-	do {
-		status = inb(smbus_base + SMBHSTSTAT);
-		if (status & ((1 << 4) | /* FAILED */
-			      (1 << 3) | /* BUS ERR */
-			      (1 << 2))) /* DEV ERR */
-			return SMBUS_ERROR;
-
-		if (status & 0x80) { /* Byte done */
-			outb(*buf++, smbus_base + SMBBLKDAT);
-			outb(status, smbus_base + SMBHSTSTAT);
-		}
-	} while (status & 0x01);
-
-	return 0;
-}
-
-static int do_smbus_block_read(unsigned smbus_base, unsigned device,
-			      unsigned cmd, unsigned bytes, u8 *buf)
-{
-	u8 status;
-	int bytes_read = 0;
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(cmd & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a block data read */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	while (!(inb(smbus_base + SMBHSTSTAT) & 1));
-	/* Poll for transaction completion */
-	do {
-		status = inb(smbus_base + SMBHSTSTAT);
-		if (status & ((1 << 4) | /* FAILED */
-			      (1 << 3) | /* BUS ERR */
-			      (1 << 2))) /* DEV ERR */
-			return SMBUS_ERROR;
-
-		if (status & 0x80) { /* Byte done */
-			*buf = inb(smbus_base + SMBBLKDAT);
-			buf++;
-			bytes_read++;
-			outb(status, smbus_base + SMBHSTSTAT);
-			if (--bytes == 1) {
-				/* indicate that next byte is the last one */
-				outb(inb(smbus_base + SMBHSTCTL) | 0x20,
-					 smbus_base + SMBHSTCTL);
-			}
-		}
-	} while (status & 0x01);
-
-	return bytes_read;
-}
-#endif