This patch adds support for K8T890CE northbridge.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2883 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

11 files changed, 809 insertions, 0 deletions

diff --git a/src/southbridge/via/k8t890/Config.lb b/src/southbridge/via/k8t890/Config.lb
new file mode 100644
index 000000000000..e18c1a20bc2b
--- /dev/null
+++ b/src/southbridge/via/k8t890/Config.lb
@@ -0,0 +1,25 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License v2 as published by
+## the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+driver k8t890_ctrl.o
+driver k8t890_dram.o
+driver k8t890_host.o
+driver k8t890_host_ctrl.o
+driver k8t890_pcie.o
+driver k8t890_traf_ctrl.o
diff --git a/src/southbridge/via/k8t890/k8t890.h b/src/southbridge/via/k8t890/k8t890.h
new file mode 100644
index 000000000000..d719af6082cc
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef SOUTHBRIDGE_VIA_K8T890_K8T890_H
+#define SOUTHBRIDGE_VIA_K8T890_K8T890_H
+
+/* Static resources for K8T890. */
+#define K8T890_APIC_ID		0x3
+
+/*
+ * Please check the datasheet and traf_ctrl_enable before change!
+ * It can't be changed to an arbitrary address.
+ */
+#define K8T890_APIC_BASE	0xfecc0000
+
+#define K8T890_MMCONFIG_MBAR	0x61
+#define K8T890_MULTIPLE_FN_EN	0x4f
+
+#endif
diff --git a/src/southbridge/via/k8t890/k8t890_ctrl.c b/src/southbridge/via/k8t890/k8t890_ctrl.c
new file mode 100644
index 000000000000..d45cd599989d
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_ctrl.c
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+
+static void ctrl_enable(struct device *dev)
+{
+	u8 regm, regm2, regm3;
+	device_t devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
+					   PCI_DEVICE_ID_VIA_K8T890CE_3, 0);
+
+	/* TODO: Fix some ordering issue fo V-link set Rx77[6] and PCI1_Rx4F[0]
+	   should to 1 */
+
+	/* C2P Read ACK Return Priority */
+	/* PCI CFG Address bits[27:24] are used as extended register address
+	   bit[11:8] */
+	pci_write_config8(dev, 0x47, 0x30);
+
+	/* FIXME: Program V-link 8X 16bit full duplex, this needs to be fixed
+	   for other than VT8237R SB */
+	pci_write_config8(dev, 0x48, 0x23);
+
+	/* Magic init. This is not well documented :/ */
+	pci_write_config8(dev, 0x70, 0xc2);
+
+	/* PCI Control */
+	pci_write_config8(dev, 0x72, 0xee);
+	pci_write_config8(dev, 0x73, 0x01);
+	pci_write_config8(dev, 0x74, 0x24);
+	pci_write_config8(dev, 0x75, 0x0f);
+	pci_write_config8(dev, 0x76, 0x50);
+	pci_write_config8(dev, 0x77, 0x08);
+	pci_write_config8(dev, 0x78, 0x01);
+	/* APIC on HT */
+	pci_write_config8(dev, 0x7c, 0x7f);
+	pci_write_config8(dev, 0x7f, 0x02);
+
+	/* WARNING: Need to copy some registers from NB (D0F3) to SB (D0F7). */
+
+	regm = pci_read_config8(devfun3, 0x88);	/* Shadow mem CTRL */
+	pci_write_config8(dev, 0x57, regm);
+
+	regm = pci_read_config8(devfun3, 0x80);	/* Shadow page C */
+	pci_write_config8(dev, 0x61, regm);
+
+	regm = pci_read_config8(devfun3, 0x81);	/* Shadow page D */
+	pci_write_config8(dev, 0x62, regm);
+
+	regm = pci_read_config8(devfun3, 0x86);	/* SMM and APIC decoding */
+	pci_write_config8(dev, 0xe6, regm);
+
+	regm3 = pci_read_config8(devfun3, 0x82);/* Shadow page E */
+
+	/*
+	 * All access bits for 0xE0000-0xEFFFF encode as just 2 bits!
+	 * So the NB reg is quite inconsistent, we expect there only 0xff or 0x00,
+	 * and write them to 0x63 7-6 but! VIA 8237A has the mirror at 0x64!
+	 */
+	if (regm3 == 0xff)
+		regm3 = 0xc0;
+	else
+		regm3 = 0x0;
+
+	/* Shadow page F + memhole copy */
+	regm = pci_read_config8(devfun3, 0x83);
+	pci_write_config8(dev, 0x63, regm3 | (regm & 0x3F));
+}
+
+static struct device_operations ctrl_ops = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.enable = ctrl_enable,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &ctrl_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_7,
+};
diff --git a/src/southbridge/via/k8t890/k8t890_dram.c b/src/southbridge/via/k8t890/k8t890_dram.c
new file mode 100644
index 000000000000..27134249dcb8
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_dram.c
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+
+static void dram_enable(struct device *dev)
+{
+	msr_t msr;
+	u16 reg;
+
+	/*
+	 * Enable Lowest Interrupt arbitration for APIC, enable NB APIC
+	 * decoding, MSI support, no SMRAM, compatible SMM.
+	 */
+	pci_write_config8(dev, 0x86, 0x39);
+
+	/*
+	 * We want to use the 0xC0000-0xEFFFF as RAM mark area as RW, even if
+	 * memory is doing K8 the DMA from SB will fail if we have it wrong,
+	 * AND even we have it here, we must later copy it to SB to make it work :/
+	 */
+
+	/* For CC000-CFFFF, bits 7:6 (10 = REn, 01 = WEn) bits 1:0 for
+	 * C0000-C3FFF etc.
+	 */
+	pci_write_config8(dev, 0x80, 0xff);
+	/* For page D0000-DFFFF */
+	pci_write_config8(dev, 0x81, 0xff);
+	/* For page E0000-EFFFF */
+	pci_write_config8(dev, 0x82, 0xff);
+	pci_write_config8(dev, 0x83, 0x30);
+
+	msr = rdmsr(TOP_MEM);
+	reg = pci_read_config16(dev, 0x84);
+	reg &= 0xf;
+	pci_write_config16(dev, 0x84, (msr.lo >> 16) | reg);
+
+	reg = pci_read_config16(dev, 0x88);
+	reg &= 0xf800;
+
+	pci_write_config16(dev, 0x88, (msr.lo >> 24) | reg);
+}
+
+static struct device_operations dram_ops = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.enable = dram_enable,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &dram_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_3,
+};
diff --git a/src/southbridge/via/k8t890/k8t890_early_car.c b/src/southbridge/via/k8t890/k8t890_early_car.c
new file mode 100644
index 000000000000..d66801e7e55b
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_early_car.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * Seems the link and width of HT link needs to be setup too, you need to
+ * generate PCI reset or LDTSTOP to apply.
+ */
+
+u8 k8t890_early_setup_car(u8 width, u8 speed)
+{
+	u8 awidth, aspeed;
+
+	print_debug("LDT width and speed for K8T890 was");
+	awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x67);
+	print_debug_hex8(awidth);
+
+	aspeed = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x6d);
+	print_debug_hex8(aspeed);
+
+	if ((aspeed == speed) && (((width == 16) && (awidth == 0x11)) ||
+				  ((width == 8) && (awidth == 0x00))))
+		return 0;
+
+	/* Update the desired HT LNK capabilities in NB too. */
+	pci_write_config8(PCI_DEV(0, 0x0, 0), 0x67,
+			  (width == 16) ? 0x11 : 0x00);
+	pci_write_config8(PCI_DEV(0, 0x0, 0), 0x6d, speed);
+
+	print_debug(" and will after HT reset: ");
+
+	awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x67);
+	print_debug_hex8(awidth);
+
+	aspeed = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x6d);
+	print_debug_hex8(aspeed);
+
+	print_debug("\n");
+
+	return 1;
+}
diff --git a/src/southbridge/via/k8t890/k8t890_host.c b/src/southbridge/via/k8t890/k8t890_host.c
new file mode 100644
index 000000000000..ee2a3748286e
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_host.c
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+#include "k8t890.h"
+
+static void host_enable(struct device *dev)
+{
+	/* Multiple function control */
+	pci_write_config8(dev, K8T890_MULTIPLE_FN_EN, 0x01);
+}
+
+static struct device_operations host_ops = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.enable = host_enable,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &host_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_0,
+};
diff --git a/src/southbridge/via/k8t890/k8t890_host_ctrl.c b/src/southbridge/via/k8t890/k8t890_host_ctrl.c
new file mode 100644
index 000000000000..05e981975c9e
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_host_ctrl.c
@@ -0,0 +1,93 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+
+/* This fine tunes the HT link settings, which were loaded by ROM strap. */
+static void host_ctrl_enable(struct device *dev)
+{
+	dump_south(dev);
+
+	/*
+	 * Bit 4 is reserved but set by AW. Set PCI to HT outstanding
+	 * requests to 3.
+	 */
+	pci_write_config8(dev, 0xa0, 0x13);
+
+	/* Disable NVRAM and enable non-posted PCI writes. */
+	pci_write_config8(dev, 0xa1, 0x8e);
+
+	/*
+	 * NVRAM I/O base 0xe00-0xeff, but it is disabled.
+	 * Some bits are set and reserved.
+	 */
+	pci_write_config8(dev, 0xa2, 0x0e);
+	/* Arbitration control, some bits are reserved. */
+	pci_write_config8(dev, 0xa5, 0x3c);
+
+	/* Arbitration control 2 */
+	pci_write_config8(dev, 0xa6, 0x80);
+
+	writeback(dev, 0xa0, 0x13);	/* Bit4 is reserved! */
+	writeback(dev, 0xa1, 0x8e);	/* Some bits are reserved. */
+	writeback(dev, 0xa2, 0x0e);	/* I/O NVRAM base 0xe00-0xeff disabled. */
+	writeback(dev, 0xa3, 0x31);
+	writeback(dev, 0xa4, 0x30);
+
+	writeback(dev, 0xa5, 0x3c);	/* Some bits reserved. */
+	writeback(dev, 0xa6, 0x80);	/* Some bits reserved. */
+	writeback(dev, 0xa7, 0x86);	/* Some bits reserved. */
+	writeback(dev, 0xa8, 0x7f);	/* Some bits reserved. */
+	writeback(dev, 0xa9, 0xcf);	/* Some bits reserved. */
+	writeback(dev, 0xaa, 0x44);
+	writeback(dev, 0xab, 0x22);
+	writeback(dev, 0xac, 0x35);	/* Maybe bit0 is read-only? */
+
+	writeback(dev, 0xae, 0x22);
+	writeback(dev, 0xaf, 0x40);
+	/* b0 is missing. */
+	writeback(dev, 0xb1, 0x13);
+	writeback(dev, 0xb4, 0x02);	/* Some bits are reserved. */
+	writeback(dev, 0xc0, 0x20);
+	writeback(dev, 0xc1, 0xaa);
+	writeback(dev, 0xc2, 0xaa);
+	writeback(dev, 0xc3, 0x02);
+	writeback(dev, 0xc4, 0x50);
+	writeback(dev, 0xc5, 0x50);
+
+	dump_south(dev);
+}
+
+static struct device_operations host_ctrl_ops = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.enable = host_ctrl_enable,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &host_ctrl_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_2,
+};
diff --git a/src/southbridge/via/k8t890/k8t890_pcie.c b/src/southbridge/via/k8t890/k8t890_pcie.c
new file mode 100644
index 000000000000..dec2348aacc0
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_pcie.c
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pciexp.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+
+void peg_init(struct device *dev)
+{
+	u8 reg;
+
+	printk_debug("Configuring PCIe PEG\n");
+	dump_south(dev);
+
+	/* Disable link. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg | 0x10);
+
+	/* Award has 0xb, VIA recomends 0x4. */
+	pci_write_config8(dev, 0xe1, 0xb);
+
+	/*
+	 * pci_write_config8(dev, 0xe2, 0x0);
+	 * pci_write_config8(dev, 0xe3, 0x92);
+	 */
+	/* Disable scrambling bit 6 to 1. */
+	pci_write_config8(dev, 0xc0, 0x43);
+
+	/* Set replay timer limit. */
+	pci_write_config8(dev, 0xb1, 0xf0);
+
+	/* Bit0 = 1 SDP (Start DLLP) always at Lane0. */
+	reg = pci_read_config8(dev, 0xb8);
+	pci_write_config8(dev, 0xb8, reg | 0x1);
+
+	/*
+	 * Downstream wait and Upstream Checking Malformed TLP through
+	 * "Byte Enable Rule" And "Over 4K Boundary Rule".
+	 */
+	reg = pci_read_config8(dev, 0xa4);
+	pci_write_config8(dev, 0xa4, reg | 0x30);
+
+	/* Enable link. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg & ~0x10);
+
+	/* Retrain link. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg | 0x20);
+
+	reg = pci_read_config8(dev, 0x3e);
+	reg |= 0x40;		/* Bus reset. */
+	pci_write_config8(dev, 0x3e, reg);
+
+	reg = pci_read_config8(dev, 0x3e);
+	reg &= ~0x40;		/* Clear reset. */
+	pci_write_config8(dev, 0x3e, reg);
+
+	dump_south(dev);
+}
+
+void pcie_init(struct device *dev)
+{
+	u8 reg;
+
+	printk_debug("Configuring PCIe PEXs\n");
+	dump_south(dev);
+
+	/* Disable link. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg | 0x10);
+
+	/* Award has 0xb, VIA recommends 0x4. */
+	pci_write_config8(dev, 0xe1, 0xb);
+	/* Set replay timer limit. */
+	pci_write_config8(dev, 0xb1, 0xf0);
+
+	/* Enable link. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg & ~0x10);
+
+	/* Retrain. */
+	reg = pci_read_config8(dev, 0x50);
+	pci_write_config8(dev, 0x50, reg | 0x20);
+
+	reg = pci_read_config8(dev, 0x3e);
+	reg |= 0x40;		/* Bus reset. */
+	pci_write_config8(dev, 0x3e, reg);
+
+	reg = pci_read_config8(dev, 0x3e);
+	reg &= ~0x40;		/* Clear reset. */
+	pci_write_config8(dev, 0x3e, reg);
+
+	dump_south(dev);
+}
+
+static struct device_operations peg_ops = {
+	.read_resources = pci_bus_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_bus_enable_resources,
+	.enable = peg_init,
+	.scan_bus = pciexp_scan_bridge,
+	.reset_bus = pci_bus_reset,
+	.ops_pci = 0,
+};
+
+static struct device_operations pcie_ops = {
+	.read_resources = pci_bus_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_bus_enable_resources,
+	.enable = pcie_init,
+	.scan_bus = pciexp_scan_bridge,
+	.reset_bus = pci_bus_reset,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &peg_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_PEG,
+};
+
+static struct pci_driver pcie_drvd3f0 __pci_driver = {
+	.ops = &pcie_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_PEX0,
+};
+
+static struct pci_driver pcie_drvd3f1 __pci_driver = {
+	.ops = &pcie_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_PEX1,
+};
+
+static struct pci_driver pcie_drvd3f2 __pci_driver = {
+	.ops = &pcie_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_PEX2,
+};
+
+static struct pci_driver pcie_drvd3f3 __pci_driver = {
+	.ops = &pcie_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_PEX3,
+};
diff --git a/src/southbridge/via/k8t890/k8t890_traf_ctrl.c b/src/southbridge/via/k8t890/k8t890_traf_ctrl.c
new file mode 100644
index 000000000000..6e6f8c86aae1
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8t890_traf_ctrl.c
@@ -0,0 +1,121 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+
+#include "k8t890.h"
+
+void mmconfig_set_resources(device_t dev)
+{
+	struct resource *resource;
+	u8 reg;
+
+	resource = find_resource(dev, K8T890_MMCONFIG_MBAR);
+	if (resource) {
+		report_resource_stored(dev, resource, "<mmconfig>");
+
+		/* Remember this resource has been stored. */
+		resource->flags |= IORESOURCE_STORED;
+		pci_write_config8(dev, K8T890_MMCONFIG_MBAR,
+				  (resource->base >> 28));
+		reg = pci_read_config8(dev, 0x60);
+		reg |= 0x3;
+		/* Enable MMCONFIG decoding. */
+		pci_write_config8(dev, 0x60, reg);
+	}
+	pci_dev_set_resources(dev);
+}
+
+static void apic_mmconfig_read_resources(device_t dev)
+{
+	struct resource *res;
+	pci_dev_read_resources(dev);
+
+	res = new_resource(dev, 0x40);
+	/* NB APIC fixed to this address. */
+	res->base = K8T890_APIC_BASE;
+	res->size = 256;
+	res->limit = res->base + res->size - 1;
+	res->align = 8;
+	res->gran = 8;
+	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED |
+		     IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+
+	/* Add an MMCONFIG resource. */
+	res = new_resource(dev, K8T890_MMCONFIG_MBAR);
+	res->size = 256 * 1024 * 1024;
+	res->align = log2(res->size);
+	res->gran = log2(res->size);
+	res->limit = 0xffffffff;	/* 4G */
+	res->flags = IORESOURCE_MEM;
+}
+
+static void traf_ctrl_enable(struct device *dev)
+{
+	volatile u32 *apic;
+	u32 data;
+
+	/* Enable D3F1-D3F3, no device2 redirect, enable just one device behind
+	 * bridge device 2 and device 3).
+	 */
+	pci_write_config8(dev, 0x60, 0x88);
+
+	/* Will enable MMCONFIG later. */
+	pci_write_config8(dev, 0x64, 0x23);
+	/* No extended RCRB Base Address. */
+	pci_write_config8(dev, 0x62, 0x00);
+
+	/* Offset80 ->95 bit 4 in 1 in Award. */
+
+	/* Enable APIC, to K8T890_APIC_BASE. */
+	pci_write_config8(dev, 0x41, 0x00);
+	pci_write_config8(dev, 0x40, 0x8c);
+	/* BT_INTR enable, APIC Nonshare Mode Enable. */
+	pci_write_config8(dev, 0x42, 0x5);
+
+	apic = (u32 *)K8T890_APIC_BASE;
+
+	/* Set APIC to FSB transported messages. */
+	apic[0] = 3;
+	data = apic[4];
+	apic[4] = (data & 0xFFFFFE) | 1;
+
+	/* Set APIC ID. */
+	apic[0] = 0;
+	data = apic[4];
+	apic[4] = (data & 0xF0FFFF) | (K8T890_APIC_ID << 24);
+}
+
+static struct device_operations traf_ctrl_ops = {
+	.read_resources = apic_mmconfig_read_resources,
+	.set_resources = mmconfig_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.enable = traf_ctrl_enable,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &traf_ctrl_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_K8T890CE_5,
+};
diff --git a/src/southbridge/via/k8t890/romstrap.inc b/src/southbridge/via/k8t890/romstrap.inc
new file mode 100644
index 000000000000..d4954e53a18b
--- /dev/null
+++ b/src/southbridge/via/k8t890/romstrap.inc
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer)
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* This file constructs the ROM strap table for K8T890. */
+
+.section ".romstrap", "a", @progbits
+
+.globl __romstrap_start
+.globl __romstrap_end
+
+__romstrap_start:
+
+/*
+ * Below are some Dev0 Func2 HT control registers values,
+ * depending on strap pin, one of below lines is used.
+ */
+tblpointer:
+.long 0x504400AA, 0x61970FC2	//;200M
+.long 0x504400AA, 0x61970FC2	//;400M
+.long 0x504400AA, 0x61970FC2	//;600M
+.long 0x504400AA, 0x61970FC2	//;800M
+.long 0x504400AA, 0x61970FC2	//;1000M
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0
+.long 0x0 
+
+/*
+ * The pointer to above table should be at 0xffffd,
+ * the table itself MUST be aligned to 128B it seems!
+ */
+.long tblpointer - 0xFFF00000
+
+__romstrap_end:
+
+.previous
diff --git a/src/southbridge/via/k8t890/romstrap.lds b/src/southbridge/via/k8t890/romstrap.lds
new file mode 100644
index 000000000000..9a3574339c2c
--- /dev/null
+++ b/src/southbridge/via/k8t890/romstrap.lds
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * (Written by Yinghai Lu <yinghai.lu@amd.com> for AMD)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Modified for K8T890 ROM strap by Rudolf Marek <r.marek@assembler.cz>. */
+
+SECTIONS {
+	. = (_ROMBASE + ROM_IMAGE_SIZE - 0x2c) - (__romstrap_end - __romstrap_start);
+	.romstrap (.): {
+		*(.romstrap)
+	}
+}