soc/qualcomm/sc7180: Adapt to recent API changes

Definitions were moved so that now device/mmio.h needs to be included
instead of arch/mmio.h. Also, don't use le32 conversion.

This follows the activities of commit 55009af42 (Change all
clrsetbits_leXX() to clrsetbitsXX()) and commit 1c371572188 (mmio: Add
clrsetbitsXX() API in place of updateX()).

Change-Id: Ie3af0d4f0b3331fe5572fc56915952547b512db7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37534
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

2 files changed, 17 insertions, 17 deletions

diff --git a/src/soc/qualcomm/sc7180/clock.c b/src/soc/qualcomm/sc7180/clock.c
index 97b7b280ca8d..9092a4e185d7 100644
--- a/src/soc/qualcomm/sc7180/clock.c
+++ b/src/soc/qualcomm/sc7180/clock.c
@@ -62,10 +62,10 @@ struct clock_config qspi_core_cfg[] = {
 
 static int clock_configure_gpll0(void)
 {
-	setbits_le32(&gcc->gpll0.user_ctl_u, 1 << SCALE_FREQ_SHFT);
+	setbits32(&gcc->gpll0.user_ctl_u, 1 << SCALE_FREQ_SHFT);
 
 	/* Keep existing GPLL0 configuration, in RUN mode @600Mhz. */
-	setbits_le32(&gcc->gpll0.user_ctl,
+	setbits32(&gcc->gpll0.user_ctl,
 			1 << CLK_CTL_GPLL_PLLOUT_EVEN_SHFT |
 			1 << CLK_CTL_GPLL_PLLOUT_MAIN_SHFT |
 			1 << CLK_CTL_GPLL_PLLOUT_ODD_SHFT);
@@ -77,7 +77,7 @@ static int clock_configure_mnd(struct sc7180_clock *clk, uint32_t m, uint32_t n,
 				uint32_t d_2)
 {
 	struct sc7180_mnd_clock *mnd = (struct sc7180_mnd_clock *)clk;
-	setbits_le32(&clk->rcg_cfg,
+	setbits32(&clk->rcg_cfg,
 			RCG_MODE_DUAL_EDGE << CLK_CTL_CFG_MODE_SHFT);
 
 	write32(&mnd->m, m & CLK_CTL_RCG_MND_BMSK);
@@ -111,7 +111,7 @@ static int clock_configure(struct sc7180_clock *clk,
 				clk_cfg[idx].d_2);
 
 	/* Commit config to RCG*/
-	setbits_le32(&clk->rcg_cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT));
+	setbits32(&clk->rcg_cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT));
 
 	return 0;
 }
@@ -125,7 +125,7 @@ static int clock_enable_vote(void *cbcr_addr, void *vote_addr,
 				uint32_t vote_bit)
 {
 	/* Set clock vote bit */
-	setbits_le32(vote_addr, BIT(vote_bit));
+	setbits32(vote_addr, BIT(vote_bit));
 
 	/* Ensure clock is enabled */
 	while (clock_is_off(cbcr_addr))
@@ -137,7 +137,7 @@ static int clock_enable_vote(void *cbcr_addr, void *vote_addr,
 static int clock_enable(void *cbcr_addr)
 {
 	/* Set clock enable bit */
-	setbits_le32(cbcr_addr, BIT(CLK_CTL_CBC_CLK_EN_SHFT));
+	setbits32(cbcr_addr, BIT(CLK_CTL_CBC_CLK_EN_SHFT));
 
 	/* Ensure clock is enabled */
 	while (clock_is_off(cbcr_addr))
@@ -149,7 +149,7 @@ static int clock_enable(void *cbcr_addr)
 void clock_reset_aop(void)
 {
 	/* Bring AOP out of RESET */
-	clrbits_le32(&aoss->aoss_cc_apcs_misc, BIT(AOP_RESET_SHFT));
+	clrbits32(&aoss->aoss_cc_apcs_misc, BIT(AOP_RESET_SHFT));
 }
 
 void clock_configure_qspi(uint32_t hz)
@@ -166,9 +166,9 @@ int clock_reset_bcr(void *bcr_addr, bool reset)
 	struct sc7180_bcr *bcr = bcr_addr;
 
 	if (reset)
-		setbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT));
+		setbits32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT));
 	else
-		clrbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT));
+		clrbits32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT));
 
 	return 0;
 }
diff --git a/src/soc/qualcomm/sc7180/usb.c b/src/soc/qualcomm/sc7180/usb.c
index 4183e9b97d25..639f40136e0e 100644
--- a/src/soc/qualcomm/sc7180/usb.c
+++ b/src/soc/qualcomm/sc7180/usb.c
@@ -13,10 +13,10 @@
  * GNU General Public License for more details.
  */
 
-#include <arch/mmio.h>
 #include <stdlib.h>
 #include <console/console.h>
 #include <delay.h>
+#include <device/mmio.h>
 #include <soc/usb.h>
 #include <soc/clock.h>
 #include <soc/addressmap.h>
@@ -565,7 +565,7 @@ static void qusb2_phy_set_tune_param(struct usb_dwc3_cfg *dwc3)
 	 * tune parameters.
 	 */
 	if (tune_val)
-		clrsetbits_le32(&dwc3->qusb_phy_dig->tune1,
+		clrsetbits32(&dwc3->qusb_phy_dig->tune1,
 				PORT_TUNE1_MASK, tune_val << 4);
 }
 
@@ -602,7 +602,7 @@ static void tune_phy(struct usb_dwc3_cfg *dwc3, struct usb_qusb_phy_dig *phy)
 static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3)
 {
 	/* PWR_CTRL: set the power down bit to disable the PHY */
-	setbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN);
+	setbits32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN);
 
 	write32(&dwc3->qusb_phy_pll->analog_controls_two,
 			QUSB2PHY_PLL_ANALOG_CONTROLS_TWO);
@@ -622,7 +622,7 @@ static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3)
 	tune_phy(dwc3, dwc3->qusb_phy_dig);
 
 	/* PWR_CTRL1: Clear the power down bit to enable the PHY */
-	clrbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN);
+	clrbits32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN);
 
 	write32(&dwc3->qusb_phy_dig->debug_ctrl2,
 				DEBUG_CTRL2_MUX_PLL_LOCK_STATUS);
@@ -688,7 +688,7 @@ static void ss_qmp_phy_init(struct usb_dwc3_cfg *dwc3)
 static void setup_dwc3(struct usb_dwc3 *dwc3)
 {
 	/* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */
-	clrsetbits_le32(&dwc3->usb3pipectl,
+	clrsetbits32(&dwc3->usb3pipectl,
 		DWC3_GUSB3PIPECTL_DELAYP1TRANS,
 		DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX);
 
@@ -698,18 +698,18 @@ static void setup_dwc3(struct usb_dwc3 *dwc3)
 	 * 2. Set USBTRDTIM to the corresponding value
 	 * according to the UTMI+ PHY interface.
 	 */
-	clrsetbits_le32(&dwc3->usb2phycfg,
+	clrsetbits32(&dwc3->usb2phycfg,
 			(DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK |
 			DWC3_GUSB2PHYCFG_PHYIF_MASK),
 			(DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
 			DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT)));
 
-	clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK |
+	clrsetbits32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK |
 			DWC3_GCTL_DISSCRAMBLE),
 			DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG);
 
 	/* configure controller in Host mode */
-	clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
+	clrsetbits32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
 			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST));
 	printk(BIOS_SPEW, "Configure USB in Host mode\n");
 }