diff options
| -rw-r--r-- | src/mainboard/google/brya/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/quandiso/gpio.c | 5 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/quandiso/overridetree.cb | 58 |
3 files changed, 16 insertions, 48 deletions
diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index c6a4987d3697..fb62880295cb 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -358,7 +358,6 @@ config BOARD_GOOGLE_QUANDISO select DRIVERS_GENESYSLOGIC_GL9750 select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_I2C_SX9324 - select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER select HAVE_WWAN_POWER_SEQUENCE select INTEL_GMA_HAVE_VBT diff --git a/src/mainboard/google/brya/variants/quandiso/gpio.c b/src/mainboard/google/brya/variants/quandiso/gpio.c index 2e2a6f5f625f..55b2905e3197 100644 --- a/src/mainboard/google/brya/variants/quandiso/gpio.c +++ b/src/mainboard/google/brya/variants/quandiso/gpio.c @@ -16,11 +16,6 @@ static const struct pad_config override_gpio_table[] = { /* A22 : GPP_A22 ==> USB_C1_AUX_DC_N */ PAD_CFG_GPO(GPP_A22, 1, DEEP), - /* B5 : I2C2_SDA ==> I2C_P_SENSOR_SDA */ - PAD_CFG_NF(GPP_B5, NONE, DEEP, NF2), - /* B6 : I2C2_SCL ==> I2C_P_SENSOR_SCL */ - PAD_CFG_NF(GPP_B6, NONE, DEEP, NF2), - /* C1 : SMBDATA ==> USI_RST_L */ PAD_CFG_GPO(GPP_C1, 1, DEEP), diff --git a/src/mainboard/google/brya/variants/quandiso/overridetree.cb b/src/mainboard/google/brya/variants/quandiso/overridetree.cb index 205fd2bc3bec..de48f2d586b1 100644 --- a/src/mainboard/google/brya/variants/quandiso/overridetree.cb +++ b/src/mainboard/google/brya/variants/quandiso/overridetree.cb @@ -290,48 +290,22 @@ chip soc/intel/alderlake register "desc" = ""SAR Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)" register "speed" = "I2C_SPEED_FAST" - register "uid" = "1" - register "reg_gnrl_ctrl0" = "0x16" - register "reg_gnrl_ctrl1" = "0x21" - register "reg_afe_ctrl0" = "0x00" - register "reg_afe_ctrl1" = "0x10" - register "reg_afe_ctrl2" = "0x00" - register "reg_afe_ctrl3" = "0x00" - register "reg_afe_ctrl4" = "0x07" - register "reg_afe_ctrl5" = "0x00" - register "reg_afe_ctrl6" = "0x00" - register "reg_afe_ctrl7" = "0x07" - register "reg_afe_ctrl8" = "0x12" - register "reg_afe_ctrl9" = "0x0f" - register "reg_prox_ctrl0" = "0x12" - register "reg_prox_ctrl1" = "0x12" - register "reg_prox_ctrl2" = "0x90" - register "reg_prox_ctrl3" = "0x60" - register "reg_prox_ctrl4" = "0x0c" - register "reg_prox_ctrl5" = "0x12" - register "reg_prox_ctrl6" = "0x3c" - register "reg_prox_ctrl7" = "0x58" - register "reg_adv_ctrl0" = "0x00" - register "reg_adv_ctrl1" = "0x00" - register "reg_adv_ctrl2" = "0x00" - register "reg_adv_ctrl3" = "0x00" - register "reg_adv_ctrl4" = "0x00" - register "reg_adv_ctrl5" = "0x05" - register "reg_adv_ctrl6" = "0x00" - register "reg_adv_ctrl7" = "0x00" - register "reg_adv_ctrl8" = "0x00" - register "reg_adv_ctrl9" = "0x00" - register "reg_adv_ctrl10" = "0x5c" - register "reg_adv_ctrl11" = "0x52" - register "reg_adv_ctrl12" = "0xb5" - register "reg_adv_ctrl13" = "0x00" - register "reg_adv_ctrl14" = "0x80" - register "reg_adv_ctrl15" = "0x0c" - register "reg_adv_ctrl16" = "0x38" - register "reg_adv_ctrl17" = "0x56" - register "reg_adv_ctrl18" = "0x33" - register "reg_adv_ctrl19" = "0xf0" - register "reg_adv_ctrl20" = "0xf0" + register "uid" = "2" + + register "ph0_pin" = "{3, 1, 3}" + register "ph1_pin" = "{1, 2, 2}" + register "ph2_pin" = "{3, 3, 1}" + register "ph3_pin" = "{1, 3, 3}" + register "ph01_resolution" = "1024" + register "ph23_resolution" = "1024" + register "startup_sensor" = "1" + register "ph01_proxraw_strength" = "3" + register "ph23_proxraw_strength" = "3" + register "avg_pos_strength" = "256" + register "cs_idle_sleep" = ""gnd"" + register "int_comp_resistor" = ""lowest"" + register "input_precharge_resistor_ohms" = "4000" + register "input_analog_gain" = "3" device i2c 28 on probe DB_USB DB_LTE probe DB_USB DB_1C_LTE |