diff options
Diffstat (limited to 'src/drivers')
-rw-r--r-- | src/drivers/i2c/cs42l42/Kconfig | 3 | ||||
-rw-r--r-- | src/drivers/i2c/cs42l42/Makefile.inc | 1 | ||||
-rw-r--r-- | src/drivers/i2c/cs42l42/chip.h | 109 | ||||
-rw-r--r-- | src/drivers/i2c/cs42l42/cs42l42.c | 122 |
4 files changed, 235 insertions, 0 deletions
diff --git a/src/drivers/i2c/cs42l42/Kconfig b/src/drivers/i2c/cs42l42/Kconfig new file mode 100644 index 000000000000..e9d11ccfe162 --- /dev/null +++ b/src/drivers/i2c/cs42l42/Kconfig @@ -0,0 +1,3 @@ +config DRIVERS_I2C_CS42L42 + bool + depends on HAVE_ACPI_TABLES diff --git a/src/drivers/i2c/cs42l42/Makefile.inc b/src/drivers/i2c/cs42l42/Makefile.inc new file mode 100644 index 000000000000..05ab562a1b7b --- /dev/null +++ b/src/drivers/i2c/cs42l42/Makefile.inc @@ -0,0 +1 @@ +ramstage-$(CONFIG_DRIVERS_I2C_CS42L42) += cs42l42.c diff --git a/src/drivers/i2c/cs42l42/chip.h b/src/drivers/i2c/cs42l42/chip.h new file mode 100644 index 000000000000..5be2e14cd1c0 --- /dev/null +++ b/src/drivers/i2c/cs42l42/chip.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi_device.h> + +enum cs42l42_ts_dbnc_rise { + RISE_DEB_0_MS = 0, + RISE_DEB_125_MS = 1, + RISE_DEB_250_MS = 2, + RISE_DEB_500_MS = 3, + RISE_DEB_750_MS = 4, + RISE_DEB_1000_MS = 5, + RISE_DEB_1250_MS = 6, + RISE_DEB_1500_MS = 7, +}; + +enum cs42l42_ts_dbnc_fall { + FALL_DEB_0_MS = 0, + FALL_DEB_125_MS = 1, + FALL_DEB_250_MS = 2, + FALL_DEB_500_MS = 3, + FALL_DEB_750_MS = 4, + FALL_DEB_1000_MS = 5, + FALL_DEB_1250_MS = 6, + FALL_DEB_1500_MS = 7, +}; + +enum cs42l42_hs_bias_ramp_rate { + HSBIAS_RAMP_FAST_RISE_SLOW_FALL = 0, + HSBIAS_RAMP_FAST = 1, + HSBIAS_RAMP_SLOW = 2, + HSBIAS_RAMP_SLOWEST = 3, +}; + +/* + * Cirrus Logic CS42L42 Audio Codec devicetree bindings + * linux/Documentation/devicetree/bindings/sound/cs42l42.txt + */ +struct drivers_i2c_cs42l42_config { + /* Interrupt configuration */ + struct acpi_irq irq; + + /* Use GPIO based interrupt instead of PIRQ */ + struct acpi_gpio irq_gpio; + + /* Use GPIO based reset gpio */ + struct acpi_gpio reset_gpio; + + /* I2C Bus Frequency in Hertz (default 400kHz) */ + unsigned int bus_speed; + + /* Define cs42L42 parameters */ + /* + * cirrus,ts-inv : Boolean property. For jacks that invert the tip sense + * polarity. Normal jacks will short tip sense pin to HS1 when headphones are + * plugged in and leave tip sense floating when not plugged in. Inverting jacks + * short tip sense when unplugged and float when plugged in. + * false = Non-inverted + * true = Inverted + * Default = Non-inverted + */ + bool ts_inv; + /* + * cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no + * debounce, the tip sense pin might be noisy on a plug event. + * Default = RISE_DEB_1000_MS + */ + enum cs42l42_ts_dbnc_rise ts_dbnc_rise; + /* + * cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG. + * With no debounce, the tip sense pin might be noisy on an unplug event. + * Default = FALL_DEB_1000_MS + */ + enum cs42l42_ts_dbnc_fall ts_dbnc_fall; + /* + * cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after + * enabling button detection interrupts. After auto-detection and before + * servicing button interrupts, the HS bias needs time to settle. If you + * don't wait, there is possibility for erroneous button interrupt. + * Value in ms, 0 - 200. + * Default = 100ms + */ + unsigned int btn_det_init_dbnce; + /* + * cirrus,btn-det-event-dbnce : This sets how long the driver delays after + * receiving a button press interrupt. With level detect interrupts, you want + * to wait a small amount of time to make sure the button press is making a + * clean connection with the bias resistors. + * Value in ms, 0 - 20. + * Default = 10ms + */ + unsigned int btn_det_event_dbnce; + /* + * cirrus,bias-lvls : For a level-detect headset button scheme, each button + * will bias the mic pin to a certain voltage. To determine which button was + * pressed, the driver will compare this biased voltage to sequential, + * decreasing voltages and will stop when a comparator is tripped, + * indicating a comparator voltage < bias voltage. This value represents a + * percentage of the internally generated HS bias voltage. For different + * hardware setups, a designer might want to tweak this. This is an array of + * descending values for the comparator voltage. + * Array of 4 values + * Each 0-63 + * < x1 x2 x3 x4 > + * Default = < 15 8 4 1> + */ + uint64_t bias_lvls[4]; + /* headset bias ramp rate */ + enum cs42l42_hs_bias_ramp_rate hs_bias_ramp_rate; +}; diff --git a/src/drivers/i2c/cs42l42/cs42l42.c b/src/drivers/i2c/cs42l42/cs42l42.c new file mode 100644 index 000000000000..d2ff6df8a31f --- /dev/null +++ b/src/drivers/i2c/cs42l42/cs42l42.c @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <acpi/acpi_device.h> +#include <acpi/acpigen.h> +#include <console/console.h> +#include <device/i2c_simple.h> +#include <device/device.h> +#include <device/path.h> + +#include "chip.h" + +#define CS42L42_ACPI_NAME "CRUS" +#define CS42L42_ACPI_HID "10134242" + +static void cs42l42_fill_ssdt(const struct device *dev) +{ + struct drivers_i2c_cs42l42_config *config = dev->chip_info; + const char *scope = acpi_device_scope(dev); + const char *path = acpi_device_path(dev); + struct acpi_i2c i2c = { + .address = dev->path.i2c.device, + .mode_10bit = dev->path.i2c.mode_10bit, + .speed = config->bus_speed ? : I2C_SPEED_FAST, + .resource = scope, + }; + struct acpi_dp *dsd; + int gpio_index = 0; + + if (!scope) + return; + + /* Device */ + acpigen_write_scope(scope); + acpigen_write_device(acpi_device_name(dev)); + acpigen_write_name_string("_HID", CS42L42_ACPI_HID); + acpigen_write_name_integer("_UID", 0); + acpigen_write_name_string("_DDN", dev->chip_ops->name); + acpigen_write_STA(acpi_device_status(dev)); + + /* Resources */ + acpigen_write_name("_CRS"); + acpigen_write_resourcetemplate_header(); + acpi_device_write_i2c(&i2c); + /* Use either Interrupt() or GpioInt() */ + if (config->irq_gpio.pin_count) + acpi_device_write_gpio(&config->irq_gpio); + else + acpi_device_write_interrupt(&config->irq); + + /* for cs42l42reset gpio */ + if (config->reset_gpio.pin_count) + acpi_device_write_gpio(&config->reset_gpio); + + acpigen_write_resourcetemplate_footer(); + + /* AAD Child Device Properties */ + dsd = acpi_dp_new_table("_DSD"); + if (config->irq_gpio.pin_count) + acpi_dp_add_gpio(dsd, "irq-gpios", path, + gpio_index++, /* Index = 0 */ + 0, /* Pin = 0 (There is a single pin in the GPIO resource). */ + config->irq_gpio.active_low); + if (config->reset_gpio.pin_count) + acpi_dp_add_gpio(dsd, "reset-gpios", path, + gpio_index++, /* Index = 0 or 1 (if irq gpio is written). */ + 0, /* Pin = 0 (There is a single pin in the GPIO resource). */ + config->reset_gpio.active_low); + acpi_dp_add_integer(dsd, "cirrus,ts-inv", config->ts_inv ? 1 : 0); + acpi_dp_add_integer(dsd, "cirrus,ts-dbnc-rise", config->ts_dbnc_rise); + acpi_dp_add_integer(dsd, "cirrus,ts-dbnc-fall", config->ts_dbnc_fall); + acpi_dp_add_integer(dsd, "cirrus,btn-det-init-dbnce", config->btn_det_init_dbnce); + + if (config->btn_det_init_dbnce > 200) { + printk(BIOS_ERR, "%s: Incorrect btn_det_init_dbnce(%d). Using default of 100ms\n", + __func__, config->btn_det_init_dbnce); + config->btn_det_init_dbnce = 100; + } + + acpi_dp_add_integer(dsd, "cirrus,btn-det-event-dbnce", config->btn_det_event_dbnce); + + if (config->btn_det_event_dbnce > 100) { + printk(BIOS_ERR, "%s: Incorrect btn_det_event_dbnce(%d). Using default of 10ms\n", + __func__, config->btn_det_event_dbnce); + config->btn_det_event_dbnce = 10; + } + + acpi_dp_add_integer_array(dsd, "cirrus,bias-lvls", config->bias_lvls, 4); + acpi_dp_add_integer(dsd, "cirrus,hs-bias-ramp-rate", config->hs_bias_ramp_rate); + + /* Write Device Property Hierarchy */ + acpi_dp_write(dsd); + + acpigen_pop_len(); /* Device */ + acpigen_pop_len(); /* Scope */ + + printk(BIOS_INFO, "%s: %s address 0%xh irq %d\n", + acpi_device_path(dev), dev->chip_ops->name, + dev->path.i2c.device, config->irq.pin); +} + +static const char *cs42l42_acpi_name(const struct device *dev) +{ + return CS42L42_ACPI_NAME; +} + +static struct device_operations cs42l42_ops = { + .read_resources = noop_read_resources, + .set_resources = noop_set_resources, + .acpi_name = cs42l42_acpi_name, + .acpi_fill_ssdt = cs42l42_fill_ssdt, +}; + +static void cs42l42_enable(struct device *dev) +{ + dev->ops = &cs42l42_ops; +} + +struct chip_operations drivers_i2c_cs42l42_ops = { + CHIP_NAME("Cirrus Logic CS42l42 Audio Codec") + .enable_dev = cs42l42_enable +}; |