diff options
Diffstat (limited to 'src/mainboard/amd/pistachio/Config.lb')
| -rw-r--r-- | src/mainboard/amd/pistachio/Config.lb | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb deleted file mode 100644 index 1f59668328d9..000000000000 --- a/src/mainboard/amd/pistachio/Config.lb +++ /dev/null @@ -1,218 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -## -## - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -#dir /drivers/si/3114 - -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE - object get_bus_conf.o - object irq_tables.o -end - -if CONFIG_GENERATE_ACPI_TABLES - object acpi_tables.o - object fadt.o - makerule dsdt.c - depends "$(CONFIG_MAINBOARD)/acpi/*.asl" - action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl" - action "mv dsdt.hex dsdt.c" - end - object ./dsdt.o -end - - if CONFIG_USE_INIT - - makerule ./cache_as_ram_auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - - else - - makerule ./cache_as_ram_auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - - end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject cache_as_ram_auto.o - else - mainboardinit ./cache_as_ram_auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -#The variables belong to mainboard are defined here. - -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_AM2 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge, K8 HT Configuration - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - # device pci 0.1 off end # CLK - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 off end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 off end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x438d - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.1 on end # K8 Address Map - device pci 18.2 on end # K8 DRAM Controller and HT Trace Mode - device pci 18.3 on end # K8 Miscellaneous Control - end #northbridge/amd/amdk8 - end #pci_domain -end #northbridge/amd/amdk8/root_complex - |