1 files changed, 366 insertions, 0 deletions
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
new file mode 100644
index 000000000000..69e06bc2e5cc
--- /dev/null
+++ b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
@@ -0,0 +1,366 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __PRE_RAM__
+
+#define RAMINIT_SYSINFO 1
+
+#define K8_ALLOCATE_IO_RANGE 1
+
+#define QRANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+//used by init_cpus and fidvid
+#define K8_SET_FIDVID 1
+//if we want to wait for core1 done before DQS training, set it to 0
+#define K8_SET_FIDVID_CORE0_ONLY 1
+
+#if CONFIG_K8_REV_F_SUPPORT == 1
+#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
+#endif
+
+#define DBGP_DEFAULT 7
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#if CONFIG_USBDEBUG_DIRECT
+#include "southbridge/sis/sis966/sis966_enable_usbdebug_direct.c"
+#include "pc80/usbdebug_direct_serial.c"
+#endif
+#include "lib/ramtest.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+
+#include "southbridge/sis/sis966/sis966_early_smbus.c"
+#include "southbridge/sis/sis966/sis966_enable_rom.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "superio/ite/it8716f/it8716f_early_serial.c"
+#include "superio/ite/it8716f/it8716f_early_init.c"
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/debug.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
+
+#include "southbridge/sis/sis966/sis966_early_ctrl.c"
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+	/* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/amdk8_f.h"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+
+#include "northbridge/amd/amdk8/raminit_f.c"
+
+#include "lib/generic_sdram.c"
+
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#define SIS966_NUM 1
+#define SIS966_USE_NIC 1
+#define SIS966_USE_AZA 1
+
+#define SIS966_PCI_E_X_0 0
+
+#define SIS966_MB_SETUP \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+
+#include "southbridge/sis/sis966/sis966_early_setup_ss.h"
+#include "southbridge/sis/sis966/sis966_early_setup_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#endif
+
+#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
+
+#include "southbridge/sis/sis966/sis966_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+static void sio_setup(void)
+{
+
+        unsigned value;
+        uint32_t dword;
+        uint8_t byte;
+
+        byte = pci_read_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b);
+        byte |= 0x20;
+        pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b, byte);
+
+        dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0);
+        dword |= (1<<0);
+        pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0, dword);
+
+        dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4);
+        dword |= (1<<16);
+        pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword);
+}
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+        unsigned last_boot_normal_x = last_boot_normal();
+
+        /* Is this a cpu only reset? or Is this a secondary cpu? */
+        if ((cpu_init_detectedx) || (!boot_cpu())) {
+                if (last_boot_normal_x) {
+                        goto normal_image;
+                } else {
+                        goto fallback_image;
+                }
+        }
+
+        /* Nothing special needs to be done to find bus 0 */
+        /* Allow the HT devices to be found */
+
+        enumerate_ht_chain();
+
+        sio_setup();
+
+        /* Setup the sis966 */
+        sis966_enable_rom();
+
+        /* Is this a deliberate reset by the bios */
+        if (bios_reset_detected() && last_boot_normal_x) {
+                goto normal_image;
+        }
+        /* This is the primary cpu how should I boot? */
+        else if (do_normal_boot()) {
+                goto normal_image;
+        }
+        else {
+                goto fallback_image;
+        }
+ normal_image:
+        __asm__ volatile ("jmp __normal_image"
+                : /* outputs */
+                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+                );
+
+ fallback_image:
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+        __asm__ volatile ("jmp __fallback_image"
+                : /* outputs */
+                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+                )
+#endif
+	;
+}
+#endif
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+    #if CONFIG_USE_FAILOVER_IMAGE==1
+	failover_process(bist, cpu_init_detectedx);
+    #else
+	real_main(bist, cpu_init_detectedx);
+    #endif
+#else
+    #if CONFIG_USE_FALLBACK_IMAGE == 1
+	failover_process(bist, cpu_init_detectedx);
+    #endif
+	real_main(bist, cpu_init_detectedx);
+#endif
+}
+
+#if CONFIG_USE_FAILOVER_IMAGE==0
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	static const uint16_t spd_addr [] = {
+			(0xa<<3)|0, (0xa<<3)|2, 0, 0,
+			(0xa<<3)|1, (0xa<<3)|3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+			(0xa<<3)|4, (0xa<<3)|6, 0, 0,
+			(0xa<<3)|5, (0xa<<3)|7, 0, 0,
+#endif
+	};
+
+        struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+        int needs_reset = 0;
+        unsigned bsp_apicid = 0;
+
+        if (bist == 0) {
+		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+        }
+
+	pnp_enter_ext_func_mode(SERIAL_DEV);
+        pnp_write_config(SERIAL_DEV, 0x23, 0);
+ 	it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	pnp_exit_ext_func_mode(SERIAL_DEV);
+
+        setup_mb_resource_map();
+
+        uart_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+
+#if CONFIG_USBDEBUG_DIRECT
+	sis966_enable_usbdebug_direct(DBGP_DEFAULT);
+	early_usbdebug_direct_init();
+#endif
+        console_init();
+        print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(",");  print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
+
+        print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+
+#if CONFIG_MEM_TRAIN_SEQ == 1
+        set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+#endif
+        setup_coherent_ht_domain(); // routing table and start other core0
+
+        wait_all_core0_started();
+#if CONFIG_LOGICAL_CPUS==1
+        // It is said that we should start core1 after all core0 launched
+        /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+         * So here need to make sure last core0 is started, esp for two way system,
+         * (there may be apic id conflicts in that case)
+         */
+        start_other_cores();
+        wait_all_other_cores_started(bsp_apicid);
+#endif
+
+        /* it will set up chains and store link pair for optimization later */
+        ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+
+#if K8_SET_FIDVID == 1
+
+        {
+                msr_t msr;
+                msr=rdmsr(0xc0010042);
+                print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+
+        }
+
+        enable_fid_change();
+
+        enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+        init_fidvid_bsp(bsp_apicid);
+
+        // show final fid and vid
+        {
+                msr_t msr;
+                msr=rdmsr(0xc0010042);
+                print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+
+        }
+#endif
+
+        needs_reset |= optimize_link_coherent_ht();
+        needs_reset |= optimize_link_incoherent_ht(sysinfo);
+
+        // fidvid change will issue one LDTSTOP and the HT change will be effective too
+        if (needs_reset) {
+                print_info("ht reset -\r\n");
+              	soft_reset();
+        }
+        allow_all_aps_stop(bsp_apicid);
+
+        //It's the time to set ctrl in sysinfo now;
+	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+
+        sis_init_stage1();
+        enable_smbus();
+
+        memreset_setup();
+
+        //do we need apci timer, tsc...., only debug need it for better output
+        /* all ap stopped? */
+//        init_timer(); // Need to use TMICT to synconize FID/VID
+
+        sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+        sis_init_stage2();
+        post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
+
+}
+
+
+#endif