diff options
Diffstat (limited to 'src/mainboard/google/puff/variants/kaisa/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/puff/variants/kaisa/overridetree.cb | 547 |
1 files changed, 547 insertions, 0 deletions
diff --git a/src/mainboard/google/puff/variants/kaisa/overridetree.cb b/src/mainboard/google/puff/variants/kaisa/overridetree.cb new file mode 100644 index 000000000000..50c6d0b1b12e --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/overridetree.cb @@ -0,0 +1,547 @@ +chip soc/intel/cannonlake + register "tcc_offset" = "5" # TCC of 95C + + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as kaisa variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(65, 90), + TEMP_PCT(61, 80), + TEMP_PCT(57, 70), + TEMP_PCT(53, 60), + TEMP_PCT(49, 50), + TEMP_PCT(45, 40), + TEMP_PCT(41, 0),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 68, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 15000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end |