summaryrefslogtreecommitdiffstats
path: root/src/mainboard/google/puff/variants/scout/overridetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/puff/variants/scout/overridetree.cb')
-rw-r--r--src/mainboard/google/puff/variants/scout/overridetree.cb514
1 files changed, 514 insertions, 0 deletions
diff --git a/src/mainboard/google/puff/variants/scout/overridetree.cb b/src/mainboard/google/puff/variants/scout/overridetree.cb
new file mode 100644
index 000000000000..8e6bc7714b91
--- /dev/null
+++ b/src/mainboard/google/puff/variants/scout/overridetree.cb
@@ -0,0 +1,514 @@
+chip soc/intel/cannonlake
+ # Auto-switch between X4 NVMe and X2 NVMe.
+ register "TetonGlacierMode" = "1"
+
+ register "SerialIoDevMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoPci,
+ [PchSerialIoIndexI2C3] = PchSerialIoPci,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
+ [PchSerialIoIndexSPI0] = PchSerialIoPci,
+ [PchSerialIoIndexSPI1] = PchSerialIoPci,
+ [PchSerialIoIndexSPI2] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART0] = PchSerialIoSkipInit,
+ [PchSerialIoIndexUART1] = PchSerialIoPci,
+ [PchSerialIoIndexUART2] = PchSerialIoDisabled,
+ }"
+
+ # USB configuration
+ register "usb2_ports[0]" = "{
+ .enable = 1,
+ .ocpin = OC2,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_11P25MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-A Port 2
+ register "usb2_ports[1]" = "{
+ .enable = 1,
+ .ocpin = OC1,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-A Port 1
+ register "usb2_ports[2]" = "{
+ .enable = 1,
+ .ocpin = OC3,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-A Port 3
+ register "usb2_ports[3]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-C Port
+ register "usb2_ports[4]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-A Port 4
+ register "usb2_ports[5]" = "{
+ .enable = 1,
+ .ocpin = OC0,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # Type-A port 0
+ register "usb2_ports[6]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[7]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[9]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ }" # BT
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4
+
+ # Bitmap for Wake Enable on USB attach/detach
+ register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
+ USB_PORT_WAKE_ENABLE(2) | \
+ USB_PORT_WAKE_ENABLE(3) | \
+ USB_PORT_WAKE_ENABLE(5) | \
+ USB_PORT_WAKE_ENABLE(6)"
+ register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
+ USB_PORT_WAKE_ENABLE(2) | \
+ USB_PORT_WAKE_ENABLE(3) | \
+ USB_PORT_WAKE_ENABLE(5) | \
+ USB_PORT_WAKE_ENABLE(6)"
+
+ # Enable eMMC HS400
+ register "ScsEmmcHs400Enabled" = "1"
+
+ # EMMC Tx CMD Delay
+ # Refer to EDS-Vol2-14.3.7.
+ # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
+ # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
+ register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
+
+ # EMMC TX DATA Delay 1
+ # Refer to EDS-Vol2-14.3.8.
+ # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
+ # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
+ register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911"
+
+ # EMMC TX DATA Delay 2
+ # Refer to EDS-Vol2-14.3.9.
+ # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
+ # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
+ # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
+ register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828"
+
+ # EMMC RX CMD/DATA Delay 1
+ # Refer to EDS-Vol2-14.3.10.
+ # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
+ # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
+ # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
+ register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b"
+
+ # EMMC RX CMD/DATA Delay 2
+ # Refer to EDS-Vol2-14.3.12.
+ # [17:16] stands for Rx Clock before Output Buffer,
+ # 00: Rx clock after output buffer,
+ # 01: Rx clock before output buffer,
+ # 10: Automatic selection based on working mode.
+ # 11: Reserved
+ # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
+ # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
+ register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D"
+
+ # EMMC Rx Strobe Delay
+ # Refer to EDS-Vol2-14.3.11.
+ # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
+ # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
+ register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515"
+
+ # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them.
+ register "PchHdaAudioLinkSsp1" = "0"
+ register "PchHdaAudioLinkDmic0" = "0"
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| GSPI0 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| | before memory is up |
+ #| I2C1 | USI (Touch screen) |
+ #| I2C2 | SCALER |
+ #| I2C3 | TPU |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .gspi[0] = {
+ .speed_mhz = 1,
+ .early_init = 1,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 60,
+ .fall_time_ns = 60,
+ },
+ .i2c[2] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 60,
+ .fall_time_ns = 60,
+ },
+ .i2c[3] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 60,
+ .fall_time_ns = 60,
+ },
+ }"
+
+ # PCIe root port 7 for LAN
+ register "PcieRpEnable[6]" = "1"
+ register "PcieRpLtrEnable[6]" = "1"
+ # Uses CLK SRC 0
+ register "PcieClkSrcUsage[0]" = "6"
+ register "PcieClkSrcClkReq[0]" = "0"
+
+ # PCIe root port 8 for WLAN
+ register "PcieRpEnable[7]" = "1"
+ register "PcieRpLtrEnable[7]" = "1"
+ # Uses CLK SRC 3
+ register "PcieClkSrcUsage[3]" = "7"
+ register "PcieClkSrcClkReq[3]" = "3"
+
+ # PCIe root port 9 for SSD (PCIe Lanes 9-12)
+ register "PcieRpEnable[8]" = "1"
+ register "PcieRpLtrEnable[8]" = "1"
+ # RP 9 uses CLK SRC 1
+ register "PcieClkSrcUsage[1]" = "8"
+ register "PcieClkSrcClkReq[1]" = "1"
+
+ # PCIe root port 10-12 disabled
+ register "PcieRpEnable[9]" = "0"
+ register "PcieRpEnable[10]" = "0"
+ register "PcieRpEnable[11]" = "0"
+
+ # PCIe root port 13 TPU0
+ register "PcieRpEnable[12]" = "1"
+ register "PcieRpLtrEnable[12]" = "1"
+ # RP 13 uses CLK SRC 2
+ register "PcieClkSrcUsage[2]" = "12"
+ register "PcieClkSrcClkReq[2]" = "2"
+
+ # PCIe root port 14 TPU1
+ register "PcieRpEnable[13]" = "1"
+ register "PcieRpLtrEnable[13]" = "1"
+ # RP 14 uses CLK SRC 4
+ register "PcieClkSrcUsage[4]" = "13"
+ register "PcieClkSrcClkReq[4]" = "4"
+
+ register "PcieRpEnable[14]" = "0"
+ register "PcieRpEnable[15]" = "0"
+
+ # GPIO for SD card detect
+ register "sdcard_cd_gpio" = "vSD3_CD_B"
+
+ # SATA port 1 Gen3 Strength
+ # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB
+ register "sata_port[1].TxGen3DeEmphEnable" = "1"
+ register "sata_port[1].TxGen3DeEmph" = "0x20"
+
+ device domain 0 on
+ device pci 04.0 on
+ chip drivers/intel/dptf
+ ## Active Policy
+ register "policies.active[0]" = "{.target=DPTF_CPU,
+ .thresholds={TEMP_PCT(94, 0),}}"
+ register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0,
+ .thresholds={TEMP_PCT(82, 80),
+ TEMP_PCT(80, 70),
+ TEMP_PCT(78, 60),
+ TEMP_PCT(75, 50),
+ TEMP_PCT(73, 40),
+ TEMP_PCT(35, 30),}}"
+
+ ## Passive Policy
+ register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)"
+ register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 5000)"
+ register "policies.passive[2]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 85, 5000)"
+
+ ## Critical Policy
+ register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)"
+ register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN)"
+ register "policies.critical[2]" = "DPTF_CRITICAL(TEMP_SENSOR_1, 90, SHUTDOWN)"
+
+ ## Power Limits Control
+ # PL1 is fixed at 15W, avg over 28-32s interval
+ # 51-51W PL2 in 1000mW increments, avg over 28-32s interval
+ register "controls.power_limits.pl1" = "{
+ .min_power = 15000,
+ .max_power = 15000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 125,}"
+ register "controls.power_limits.pl2" = "{
+ .min_power = 51000,
+ .max_power = 51000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 1000,}"
+
+ ## Charger Performance Control (Control, mA)
+ register "controls.charger_perf[0]" = "{ 255, 1700 }"
+ register "controls.charger_perf[1]" = "{ 24, 1500 }"
+ register "controls.charger_perf[2]" = "{ 16, 1000 }"
+ register "controls.charger_perf[3]" = "{ 8, 500 }"
+
+ ## Fan Performance Control (Percent, Speed, Noise, Power)
+ register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }"
+ register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }"
+ register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }"
+ register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }"
+ register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }"
+ register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }"
+ register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }"
+ register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }"
+ register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }"
+ register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }"
+
+ # Fan options
+ register "options.fan.fine_grained_control" = "1"
+ register "options.fan.step_size" = "2"
+
+ device generic 0 on end
+ end
+ end # DPTF 0x1903
+ device pci 14.0 on
+ chip drivers/usb/acpi
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Left""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 0)"
+ device usb 2.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port Rear""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 3)"
+ device usb 2.1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Right""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 1)"
+ device usb 2.2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Rear Right""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 2.3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Rear Middle""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device usb 2.4 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Rear Left""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 0)"
+ device usb 2.5 on end
+ end
+ chip drivers/usb/acpi
+ device usb 2.6 off end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Front Left""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(0, 0)"
+ device usb 3.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Front Right""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(0, 1)"
+ device usb 3.1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Rear Right""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 3.2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Rear""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 3)"
+ device usb 3.3 on end
+ end
+ chip drivers/usb/acpi
+ # USB3 Port 5 is not populated
+ device usb 3.4 off end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 M.2 HDMI-to-USB""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(2, 0)"
+ device usb 3.5 on end
+ end
+ end
+ end
+ end # USB xHCI
+ device pci 15.0 off
+ # RFU - Reserved for Future Use.
+ end # I2C #0
+ device pci 15.1 on # I2C #1, USI (Touch screen)
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ILTK0001""
+ register "generic.desc" = ""ILITEK Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
+ register "generic.reset_delay_ms" = "600"
+ register "generic.wake" = "GPE0_DW2_16"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 41 on end
+ end
+ end
+ device pci 15.2 on end # I2C #2, SCALER
+ device pci 15.3 on end # I2C #3, TPU
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 19.0 off end # I2C #4
+ device pci 1a.0 on end # eMMC
+ device pci 1c.6 on # PCI Root Port 7 (LAN)
+ chip drivers/net # RTL8111H Ethernet NIC
+ register "customized_leds" = "0x05af"
+ register "wake" = "GPE0_DW1_07" # GPP_C7
+ register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)"
+ register "stop_delay_ms" = "12" # NIC needs time to quiesce
+ register "stop_off_delay_ms" = "1"
+ register "has_power_resource" = "1"
+ register "device_index" = "0"
+ device pci 00.0 on end
+ end
+ end
+ device pci 1c.7 on # PCI Root Port 8 (WLAN)
+ register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot
+ end
+ device pci 1d.0 on # PCI Root Port 9 (SSD)
+ register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot
+ end
+ device pci 1d.1 off end # PCI Root Port 10 (Not connected)
+ device pci 1d.2 off end # PCI Root Port 11 (Not connected)
+ device pci 1d.3 off end # PCI Root Port 12 (Not connected)
+ device pci 1d.4 on # PCI Root Port 13 (TPU0)
+ register "PcieRpSlotImplemented[12]" = "1" # M.2 Slot
+ end
+ device pci 1d.5 on # PCI Root Port 14 (TPU1)
+ register "PcieRpSlotImplemented[13]" = "1" # M.2 Slot
+ end
+ device pci 1d.6 on end # PCI Root Port 15 (non-root)
+ device pci 1d.7 on end # PCI Root Port 16 (non-root)
+ device pci 1e.0 on end # UART #0
+ device pci 1e.1 on end # UART #1
+ device pci 1e.3 off end # GSPI #1
+ end
+
+ # VR Settings Configuration for 4 Domains
+ #+----------------+-------+-------+-------+-------+
+ #| Domain/Setting | SA | IA | GTUS | GTS |
+ #+----------------+-------+-------+-------+-------+
+ #| Psi1Threshold | 20A | 20A | 20A | 20A |
+ #| Psi2Threshold | 5A | 5A | 5A | 5A |
+ #| Psi3Threshold | 1A | 1A | 1A | 1A |
+ #| Psi3Enable | 1 | 1 | 1 | 1 |
+ #| Psi4Enable | 1 | 1 | 1 | 1 |
+ #| ImonSlope | 0 | 0 | 0 | 0 |
+ #| ImonOffset | 0 | 0 | 0 | 0 |
+ #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+ #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 |
+ #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 |
+ #+----------------+-------+-------+-------+-------+
+ #Note: IccMax settings are moved to SoC code
+ register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .icc_max = 0,
+ .voltage_limit = 1520,
+ .ac_loadline = 1004,
+ .dc_loadline = 1004,
+ }"
+
+ register "domain_vr_config[VR_IA_CORE]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .icc_max = 0,
+ .voltage_limit = 1520,
+ .ac_loadline = 181,
+ .dc_loadline = 181,
+ }"
+
+ register "domain_vr_config[VR_GT_UNSLICED]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .icc_max = 0,
+ .voltage_limit = 1520,
+ .ac_loadline = 319,
+ .dc_loadline = 319,
+ }"
+
+ register "domain_vr_config[VR_GT_SLICED]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .icc_max = 0,
+ .voltage_limit = 1520,
+ .ac_loadline = 319,
+ .dc_loadline = 319,
+ }"
+
+end
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-08 09:34:37 +0000