1 files changed, 83 insertions, 0 deletions
diff --git a/src/mainboard/google/zork/variants/morphius/overridetree.cb b/src/mainboard/google/zork/variants/morphius/overridetree.cb
new file mode 100644
index 000000000000..b4a801566e61
--- /dev/null
+++ b/src/mainboard/google/zork/variants/morphius/overridetree.cb
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+chip soc/amd/picasso
+
+	# Start : OPN Performance Configuration
+	# See devhub #55593 Chapter 3.2 for documentation
+	# For the below fields, 0 indicates use SOC default
+
+	# System config index
+	register "system_config" = "2"
+
+	# Set STAPM confiuration. All of these fields must be set >0 to take affect
+	register "slow_ppt_limit" = "20000" #mw
+	register "fast_ppt_limit" = "24000" #mw
+	register "slow_ppt_time_constant" = "5" #second
+	register "stapm_time_constant" = "200" #second
+	register "sustained_power_limit" = "12000" #mw
+
+	register "telemetry_vddcr_vdd_slope" = "78289" #mA
+	register "telemetry_vddcr_vdd_offset" = "0"
+	register "telemetry_vddcr_soc_slope" = "24519" #mA
+	register "telemetry_vddcr_soc_offset" = "0"
+
+	# End : OPN Performance Configuration
+
+	# Enable I2C2 for trackpad, touchscreen, pen at 400kHz
+	register "i2c[2]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 18,  /* 0 to 2.31 (3.3 * .7) */
+		.fall_time_ns = 57,  /* 2.31 to 0 */
+	}"
+
+	# Enable I2C3 for H1 400kHz
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 184, /* 0 to 1.26v (1.8 * .7) */
+		.fall_time_ns = 42,  /* 1.26v to 0 */
+		.early_init = true,
+	}"
+
+	# See AMD 55570-B1 Table 13: PCI Device ID Assignments.
+	device domain 0 on
+		subsystemid 0x1022 0x1510 inherit
+		device pci 1.6 off end # GPP Bridge 5
+		device pci 1.7 on  end # GPP Bridge 6 - NVME
+		device pci 8.1 on      # Internal GPP Bridge 0 to Bus A
+			device pci 0.3 on  end # USB 3.1
+			device pci 0.4 on  end # USB 3.1
+		end
+		device pci 14.6 off end # Non-Functional SDHCI
+	end # domain
+
+	device mmio 0xfedc4000 on
+		chip drivers/i2c/generic
+			register "hid" = ""ELAN0000""
+			register "desc" = ""ELAN Touchpad""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
+			register "wake" = "7"
+			register "probed" = "1"
+			device i2c 15 on end
+		end
+		chip drivers/i2c/hid
+			register "generic.hid" = ""PNP0C50""
+			register "generic.desc" = ""Synaptics Touchpad""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
+			register "generic.wake" = "7"
+			register "generic.probed" = "1"
+			register "hid_desc_reg_offset" = "0x20"
+			device i2c 2c on end
+		end
+		chip drivers/i2c/hid
+			register "generic.hid" = ""GTCH7375L""
+			register "generic.desc" = ""G2TOUCH Touchscreen""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
+			register "generic.probed" = "1"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "generic.reset_delay_ms" = "120"
+			register "generic.has_power_resource" = "1"
+			register "generic.disable_gpio_export_in_crs" = "1"
+			register "hid_desc_reg_offset" = "0x01"
+			device i2c 5d on end
+		end
+	end
+end	# chip soc/amd/picasso