diff options
Diffstat (limited to 'src/mainboard/google')
| -rw-r--r-- | src/mainboard/google/brya/variants/baseboard/devicetree.cb | 108 |
1 files changed, 107 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/variants/baseboard/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/devicetree.cb index 479a7eeb1940..96e0a9db539e 100644 --- a/src/mainboard/google/brya/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/devicetree.cb @@ -3,6 +3,113 @@ chip soc/intel/alderlake device lapic 0 on end end + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB2_C0 + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # USB2_C1 + register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # USB2_C2 + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + + # Enable WLAN PCIE 5 using clk 2 + register "pch_pcie_rp[PCH_RP(5)]" = "{ + .clk_src = 2, + .clk_req = 2, + .flags = PCIE_RP_ENABLED, + }" + + # Enable WWAN PCIE 6 using clk 5 + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_ENABLED, + }" + + # Enable SD Card PCIE 8 using clk 3 + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .clk_src = 3, + .clk_req = 3, + .flags = PCIE_RP_ENABLED | PCIE_RP_HOTPLUG_ENABLED | PCIE_RP_LTR_ENABLED, + }" + + # Enable NVMe PCIE 9 using clk 1 + register "pch_pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 1, + .clk_req = 1, + .flags = PCIE_RP_ENABLED | PCIE_RP_LTR_ENABLED, + }" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 1, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 1, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoPci, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio | + #| I2C1 | Touchscreen | + #| I2C2 | SAR0 | + #| I2C3 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C4 | CAM | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + device domain 0 on device ref igpu on end device ref dtt on end @@ -30,7 +137,6 @@ chip soc/intel/alderlake device ref pcie_rp8 on end #PCIE8 SD card device ref pcie_rp9 on end #PCIE9-12 SSD device ref uart0 on end - device ref gspi0 on end device ref gspi1 on end device ref pch_espi on chip ec/google/chromeec |