diff options
Diffstat (limited to 'src/mainboard/intel/minnowmax/romstage.c')
-rw-r--r-- | src/mainboard/intel/minnowmax/romstage.c | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/src/mainboard/intel/minnowmax/romstage.c b/src/mainboard/intel/minnowmax/romstage.c deleted file mode 100644 index 38b7e0d6ff5f..000000000000 --- a/src/mainboard/intel/minnowmax/romstage.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * Copyright (C) 2014 Intel Corporation - * Copyright (C) 2018 CMR Surgical Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <soc/romstage.h> -#include <drivers/intel/fsp1_0/fsp_util.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <soc/gpio.h> -#include <soc/intel/fsp_baytrail/chip.h> -#include <cpu/x86/tsc.h> - -/** - * /brief mainboard call for setup that needs to be done before fsp init - * - */ -void early_mainboard_romstage_entry(void) -{ - -} - -/** - * Get function disables - most of these will be done automatically - * @param fd_mask - * @param fd2_mask - */ -void get_func_disables(uint32_t *fd_mask, uint32_t *fd2_mask) -{ - -} - -/** - * /brief mainboard call for setup that needs to be done after fsp init - * - */ -void late_mainboard_romstage_entry(void) -{ - -} - -/* Set up the default soldered down memory config for 1GB */ -static const MEMORY_DOWN_DATA minnowmax_memory_config[] = { - /* 1066 */ - { - .EnableMemoryDown = 1, - .DRAMSpeed = 1, /* DRAM Speed: 0=800, 1=1066, 2=1333, 3=1600*/ - .DRAMType = 1, /* DRAM Type: 0=DDR3, 1=DDR3L, 2=DDR3U, 4=LPDDR2, 5=LPDDR3, 6=DDR4*/ - .DIMM0Enable = 1, /* DIMM 0 Enable */ - .DIMM1Enable = 0, /* DIMM 1 Enable */ - .DIMMDWidth = 1, /* DRAM device data width: 0=x8, 1=x16, 2=x32*/ - .DIMMDensity = 1, /* DRAM device data density: 0=1Gb, 1=2Gb, 2=4Gb, 3=8Gb */ - .DIMMBusWidth = 3, /* DIMM Bus Width: 0=8bit, 1=16bit, 2=32bit, 3=64bit */ - .DIMMSides = 0, /* Ranks Per DIMM: 0=1rank, 1=2rank */ - .DIMMtCL = 11, /* tCL */ - .DIMMtRPtRCD = 11, /* tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc. */ - .DIMMtWR = 12, /* tWR in DRAM clk */ - .DIMMtWTR = 6, /* tWTR in DRAM clk */ - .DIMMtRRD = 6, /* tRRD in DRAM clk */ - .DIMMtRTP = 6, /* tRTP in DRAM clk */ - .DIMMtFAW = 20, /* tFAW in DRAM clk */ - }, - /* 1333 */ - { - .EnableMemoryDown = 1, - .DRAMSpeed = 2, /* DRAM Speed: 0=800, 1=1066, 2=1333, 3=1600*/ - .DRAMType = 1, /* DRAM Type: 0=DDR3, 1=DDR3L, 2=DDR3U, 4=LPDDR2, 5=LPDDR3, 6=DDR4*/ - .DIMM0Enable = 1, /* DIMM 0 Enable */ - .DIMM1Enable = 0, /* DIMM 1 Enable */ - .DIMMDWidth = 1, /* DRAM device data width: 0=x8, 1=x16, 2=x32*/ - .DIMMDensity = 1, /* DRAM device data density: 0=1Gb, 1=2Gb, 2=4Gb, 3=8Gb */ - .DIMMBusWidth = 3, /* DIMM Bus Width: 0=8bit, 1=16bit, 2=32bit, 3=64bit */ - .DIMMSides = 0, /* Ranks Per DIMM: 0=1rank, 1=2rank */ - .DIMMtCL = 9, /* tCL */ - .DIMMtRPtRCD = 9, /* tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc. */ - .DIMMtWR = 10, /* tWR in DRAM clk */ - .DIMMtWTR = 5, /* tWTR in DRAM clk */ - .DIMMtRRD = 4, /* tRRD in DRAM clk */ - .DIMMtRTP = 5, /* tRTP in DRAM clk */ - .DIMMtFAW = 30, /* tFAW in DRAM clk */ - } -}; - -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - UPD_DATA_REGION *UpdData = FspRtBuffer->Common.UpdDataRgnPtr; - u8 use_xhci = UpdData->PcdEnableXhci; - u8 gpio5 = 0; - int is_1333_sku; - - /* - * The E3827 and E3845 SKUs are fused at 1333MHz DDR3 speeds. There's - * no good way of knowing the SKU'ing so frequency is used as a proxy. - * The E3805, E3815, E3825, and E3826 are all <= 1460MHz while the - * E3827 and E3845 are 1750MHz and 1910MHz, respectively. - */ - is_1333_sku = !!(tsc_freq_mhz() >= 1700); - - printk(BIOS_INFO, "Using %d MHz DDR3 settings.\n", - is_1333_sku ? 1333 : 1066); - - /* Set up soldered down memory parameters for 1GB */ - UpdData->PcdMemoryParameters = minnowmax_memory_config[is_1333_sku]; - - /* - * Minnow Max Board - * Read SSUS gpio 5 to determine memory type - * 0 : 1GB SKU uses 2Gb density memory - * 1 : 2GB SKU uses 4Gb density memory - * - * devicetree.cb assumes 1GB SKU board - */ - configure_ssus_gpio(5, PAD_FUNC0 | PAD_PULL_DISABLE, PAD_VAL_INPUT); - gpio5 = read_ssus_gpio(5); - if (gpio5) - UpdData->PcdMemoryParameters.DIMMDensity - += (DIMM_DENSITY_4G_BIT - DIMM_DENSITY_2G_BIT); - printk(BIOS_NOTICE, "%s GB Minnowboard Max detected.\n", - gpio5 ? "2 / 4" : "1"); - /* Update XHCI UPD value if required */ - get_option(&use_xhci, "use_xhci_over_ehci"); - if ((use_xhci < 2) && (use_xhci != UpdData->PcdEnableXhci)) { - UpdData->PcdEnableXhci = use_xhci; - printk(FSP_INFO_LEVEL, "Xhci updated from CMOS:\t\t\t%s\n", - UpdData->PcdEnableXhci?"Enabled":"Disabled"); - } -} |