diff options
Diffstat (limited to 'src/mainboard/kontron/986lcd-m/Config.lb')
| -rw-r--r-- | src/mainboard/kontron/986lcd-m/Config.lb | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb deleted file mode 100644 index 66ada57c65f9..000000000000 --- a/src/mainboard/kontron/986lcd-m/Config.lb +++ /dev/null @@ -1,270 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -## -## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. -## - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## -## Image size calculation -## - -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -driver rtl8168.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end - -if CONFIG_GENERATE_ACPI_TABLES - object fadt.o - object acpi_tables.o - makerule dsdt.c - depends "$(CONFIG_MAINBOARD)/dsdt.asl" - action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl" - action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl" - action "mv $(CURDIR)/dsdt.hex dsdt.c" - end - object ./dsdt.o -end - -if CONFIG_USE_INIT - -makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -else - -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" -end - -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - ldscript /cpu/x86/car/cache_as_ram.lds -end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## Setup Cache-As-Ram -## -mainboardinit cpu/intel/model_6ex/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -end - -### -### O.k. We aren't just an intermediary anymore! -### - -if CONFIG_USE_INIT -initobject auto.o -else -mainboardinit ./auto.inc -end - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/i945 - - device apic_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device apic 0 on end - end - end - - device pci_domain 0 on - device pci 00.0 on end # host bridge - # autodetect 0:1.0 because it might or might not be there. - # device pci 01.0 off end # i945 PCIe root port - device pci 02.0 on end # vga controller - device pci 02.1 on end # display controller - - chip southbridge/intel/i82801gx - register "pirqa_routing" = "0x05" - register "pirqb_routing" = "0x07" - register "pirqc_routing" = "0x05" - register "pirqd_routing" = "0x07" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x06" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi13_routing" = "1" - register "gpe0_en" = "0x00000400" - - register "ide_legacy_combined" = "0x1" - register "ide_enable_primary" = "0x1" - register "ide_enable_secondary" = "0x1" - register "sata_ahci" = "0x0" - - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe - device pci 1c.1 on end # PCIe - device pci 1c.2 on end # PCIe - #device pci 1c.3 off end # PCIe port 4 - #device pci 1c.4 off end # PCIe port 5 - #device pci 1c.5 off end # PCIe port 6 - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.3 on end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on end # PCI bridge - #device pci 1e.2 off end # AC'97 Audio - #device pci 1e.3 off end # AC'97 Modem - device pci 1f.0 on # LPC bridge - chip superio/winbond/w83627thg - device pnp 2e.0 off # Floppy - end - device pnp 2e.1 off # Parport - end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq - end - device pnp 2e.5 on # Keyboard+Mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - irq 0xf0 = 0x82 # HW accel A20. - end - device pnp 2e.7 on # GPIO1, GAME, MIDI - io 0x62 = 0x330 - irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 - # all default - end - device pnp 2e.9 on # GPIO3/4 - irq 0x30 = 0x03 # does this work? - irq 0xf0 = 0xfb # set inputs/outputs - irq 0xf1 = 0x66 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0xa00 - irq 0x70 = 0 - end - - end - chip superio/winbond/w83627thg - device pnp 4e.0 off # Floppy - end - device pnp 4e.1 off # Parport - end - device pnp 4e.2 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 11 - end - device pnp 4e.3 on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 10 - end - device pnp 4e.5 off # Keyboard - end - device pnp 4e.7 off # GPIO1, GAME, MIDI - end - device pnp 4e.8 off # GPIO2 - end - device pnp 4e.9 off # GPIO3/4 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b off # HWM - end - end - - end - #device pci 1f.1 off end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus - #device pci 1f.4 off end # Realtek ID Codec - end - end -end |