diff options
Diffstat (limited to 'src/mainboard/system76/adl/variants/darp8/overridetree.cb')
| -rw-r--r-- | src/mainboard/system76/adl/variants/darp8/overridetree.cb | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/src/mainboard/system76/adl/variants/darp8/overridetree.cb b/src/mainboard/system76/adl/variants/darp8/overridetree.cb new file mode 100644 index 000000000000..5f82c443c016 --- /dev/null +++ b/src/mainboard/system76/adl/variants/darp8/overridetree.cb @@ -0,0 +1,177 @@ +chip soc/intel/alderlake + # HACK: Limit PL4 to PL2 to prevent power-off when system is booted on + # battery power. This seems to only happen with the i7 units. + register "power_limits_config[ADL_P_282_482_28W_CORE]" = "{ + .tdp_pl1_override = 20, + .tdp_pl2_override = 56, + .tdp_pl4 = 56, // FIXME: Set to 65 + }" + + # GPE configuration + register "pmc_gpe0_dw0" = "PMC_GPP_A" + register "pmc_gpe0_dw1" = "PMC_GPP_R" + register "pmc_gpe0_dw2" = "PMC_GPD" + + device domain 0 on + subsystemid 0x1558 0x7716 inherit + + device ref pcie4_0 on + # PCIe PEG0 x4, Clock 0 (SSD2) + register "cpu_pcie_rp[CPU_RP(1)]" = "{ + .clk_src = 0, + .clk_req = 0, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D14)" # SSD2_PWR_EN + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F20)" # M2_CPU_SSD2_RST# + register "srcclk_pin" = "0" # SSD2_CLKREQ# + device generic 0 on end + end + end + device ref tcss_xhci on + register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)" + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 TBT Type-C"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device ref tcss_usb3_port1 on end + end + end + end + end + device ref xhci on + # USB2 + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Motherboard + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Multi Board + register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" # J_TYPEC1 (USB 3.2 Gen 2) + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint + register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC_SKIP)" # J_TYPEC2 (Thunderbolt) + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Camera + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + # USB3 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Motherboard + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # J_TYPEC1 CH1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # J_TYPEC1 CH2 + # ACPI + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 UJ_USB1"" + register "type" = "UPC_TYPE_A" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 J_USB3_1"" + register "type" = "UPC_TYPE_A" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 J_TYPEC1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Fingerprint"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 J_TYPEC2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 J_USB3_1"" + register "type" = "UPC_TYPE_A" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 J_TYPEC1 CH0"" + register "type" = "UPC_TYPE_A" + device ref usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 J_TYPEC1 CH1"" + register "type" = "UPC_TYPE_A" + device ref usb3_port3 on end + end + end + end + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref pcie_rp5 on + # PCIe RP#5 x1, Clock 2 (WLAN) + register "pch_pcie_rp[PCH_RP(5)]" = "{ + .clk_src = 2, + .clk_req = 2, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" # WLAN_EN + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B17)" # WLAN_RST#_R + register "srcclk_pin" = "2" # WLAN_CLKREQ# + device generic 0 on end + end + end + device ref pcie_rp6 on + # PCIe RP#6 x1, Clock 5 (CARD) + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp8 on + # PCIe RP#8 x1, Clock 6 (GLAN) + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .clk_src = 6, + .clk_req = 6, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp9 on + # PCIe RP#9 x4, Clock 4 (SSD1) + register "pch_pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 4, + .clk_req = 4, + .flags = PCIE_RP_LTR, + }" + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D16)" # SSD1_PWR_EN + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B16)" # M2_SSD1_RST# + register "srcclk_pin" = "4" # SSD1_CLKREQ# + device generic 0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + # J_TYPEC2 + use usb2_port6 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + end + end + end + end +end |