1 files changed, 459 insertions, 0 deletions
diff --git a/src/soc/qualcomm/common/pcie_common.c b/src/soc/qualcomm/common/pcie_common.c
new file mode 100644
index 000000000000..67f628287508
--- /dev/null
+++ b/src/soc/qualcomm/common/pcie_common.c
@@ -0,0 +1,459 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <boot/coreboot_tables.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/device.h>
+#include <device/mmio.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <gpio.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/qcom_qmp_phy.h>
+#include <soc/pcie.h>
+#include <timer.h>
+
+#define ROOT_PORT_BDF		0x0
+#define ATU_CTRL2		PCIE_ATU_UNR_REGION_CTRL2
+
+static struct qcom_pcie_cntlr_t qcom_pcie_cfg;
+
+static inline void dw_pcie_dbi_rd_wr(bool enable)
+{
+	uint32_t val;
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	val = read32(pcierc->dbi_base + PCIE_DBI_MISC_CONTROL_1_OFF);
+
+	if (enable)
+		val |= PCIE_DBI_RO_WR_EN;
+	else
+		val &= ~PCIE_DBI_RO_WR_EN;
+
+	write32(pcierc->dbi_base + PCIE_DBI_MISC_CONTROL_1_OFF, val);
+}
+
+static void dw_pcie_writel_iatu(unsigned int index, uint32_t reg, uint32_t val)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+	unsigned int offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	write32(pcierc->atu_base + offset + reg, val);
+}
+
+static uint32_t dw_pcie_readl_iatu(unsigned int index, uint32_t reg)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+	unsigned int offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	return read32(pcierc->atu_base + offset + reg);
+}
+
+static void qcom_dw_pcie_prog_outbound_atu(unsigned int index,
+					   unsigned int type, uint64_t cpu_addr,
+					   uint64_t pcie_addr, uint32_t size)
+{
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LOWER_BASE, lower_32_bits(cpu_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_UPPER_BASE, upper_32_bits(cpu_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LIMIT, lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LOWER_TARGET, lower_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_REGION_CTRL2, PCIE_ATU_ENABLE);
+
+	/* Ensure ATU enable takes effect before any subsequent config access */
+	if (retry(LINK_WAIT_MAX_IATU_RETRIES,
+		  (dw_pcie_readl_iatu(index, ATU_CTRL2) & PCIE_ATU_ENABLE),
+		  udelay(LINK_WAIT_IATU)))
+		return;
+
+	printk(BIOS_ERR, "PCIe o/b iATU couldn't be enabled after 5ms\n");
+}
+
+static void qcom_pcie_configure_gpios(pcie_cntlr_cfg_t *cfg)
+{
+	gpio_configure(cfg->perst, 0, GPIO_NO_PULL, GPIO_16MA, GPIO_OUTPUT);
+}
+
+/**
+ * qcom_dw_pcie_configure() - Configure link capabilities and speed
+ *
+ * Configure the link capabilities and speed in the PCIe root complex.
+ */
+static void qcom_dw_pcie_configure(uint32_t cap_speed)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	dw_pcie_dbi_rd_wr(true);
+
+	clrsetbits32(pcierc->dbi_base + PCIE_LINK_CAPABILITY,
+		     TARGET_LINK_SPEED_MASK, cap_speed);
+
+	clrsetbits32(pcierc->dbi_base + PCIE_LINK_CTL_2,
+		     TARGET_LINK_SPEED_MASK, cap_speed);
+
+	dw_pcie_dbi_rd_wr(false);
+	printk(BIOS_INFO, "PCIe Link speed configured in Gen %d\n", cap_speed);
+}
+
+/**
+ * is_pcie_link_up() - Return the link state
+ *
+ * Return: true for active link and false for no link
+ */
+static bool is_pcie_link_up(struct qcom_pcie_cntlr_t *pci)
+{
+	/* Read link status register */
+	return !!(read32(pci->cntlr_cfg->elbi + PCIE3X2_ELBI_SYS_STTS) & XMLH_LINK_UP);
+}
+
+/**
+ * wait_link_up() - Wait for the link to come up
+ *
+ * Return: true for active line and false for no link (timeout)
+ */
+static bool wait_link_up(struct qcom_pcie_cntlr_t *pci)
+{
+	/* Check if the link is up or not */
+	if (retry(LINK_WAIT_MAX_RETRIES, is_pcie_link_up(pci), mdelay(PCIE_LINK_UP_MS)))
+		return true;
+
+	printk(BIOS_ERR, "PCIe link is not up even after 1sec\n");
+	return false;
+}
+
+static enum cb_err qcom_pcie_dw_link_up(struct qcom_pcie_cntlr_t *pcie)
+{
+	if (is_pcie_link_up(pcie)) {
+		printk(BIOS_INFO, "PCIe Link is already up\n");
+		return CB_SUCCESS;
+	}
+
+	/* DW pre link configurations */
+	qcom_dw_pcie_configure(LINK_SPEED_GEN_2);
+
+	/* enable link training */
+	setbits32(pcie->cntlr_cfg->parf + PCIE_PARF_LTSSM, LTSSM_EN);
+
+	/* Check that link was established */
+	if (wait_link_up(pcie)) {
+		printk(BIOS_INFO, "PCIe link is up\n");
+		return CB_SUCCESS;
+	}
+
+	/*
+	 * Link can be established in Gen 1 as it failed to establish in Gen2.
+	 * So allow some time to do it.
+	 */
+	udelay(100);
+
+	return CB_ERR;
+}
+
+/**
+ * Returns root port config space address or endpoint config space address.
+ * For endpoint config address, mapping would be done with ATU.
+ */
+static void *qcom_dw_pcie_get_config_addr(struct qcom_pcie_cntlr_t *pcierc,
+					  pci_devfn_t dev)
+{
+	unsigned int atu_type, cfg_size;
+	void *cfg_address;
+	uint32_t bus, busdev, devfn;
+	pcie_cntlr_cfg_t *cntlr = pcierc->cntlr_cfg;
+	bus = PCI_DEV2SEGBUS(dev);
+	devfn = PCI_DEV2DEVFN(dev);
+
+	busdev = PCIE_ATU_BUS(bus) |
+		 PCIE_ATU_DEV(PCI_SLOT(devfn)) |
+		 PCIE_ATU_FUNC(PCI_FUNC(devfn));
+
+	/* Accessing root port configuration space */
+	if (!bus && !devfn) {
+		cfg_address = pcierc->cntlr_cfg->dbi_base;
+		return cfg_address;
+	}
+
+	/* For local bus use CFG0 type */
+	atu_type = (bus == 1) ? PCIE_ATU_TYPE_CFG0 : PCIE_ATU_TYPE_CFG1;
+
+	cfg_address = cntlr->cfg_base + (cntlr->cfg_size * devfn);
+	cfg_size = cntlr->cfg_size;
+
+	qcom_dw_pcie_prog_outbound_atu(PCIE_ATU_REGION_INDEX1, atu_type,
+				       (uint64_t)cfg_address, busdev, cfg_size);
+	return cfg_address;
+}
+
+static void qcom_dw_pcie_setup_rc(struct qcom_pcie_cntlr_t *pcie)
+{
+	uint32_t val;
+	pcie_cntlr_cfg_t *pcierc = pcie->cntlr_cfg;
+	/*
+	 * Enable DBI read-only registers for writing/updating configuration.
+	 * Write permission gets disabled towards the end of this function.
+	 */
+	dw_pcie_dbi_rd_wr(true);
+
+	val = read32(pcierc->dbi_base + PCIE_PORT_LINK_CONTROL);
+	/* Set the number of lanes */
+	val &= ~PORT_LINK_MODE_MASK;
+
+	switch (pcierc->lanes) {
+	case 1:
+		val |= PORT_LINK_MODE_1_LANES;
+		break;
+	case 2:
+		val |= PORT_LINK_MODE_2_LANES;
+		break;
+	case 4:
+		val |= PORT_LINK_MODE_4_LANES;
+		break;
+	case 8:
+		val |= PORT_LINK_MODE_8_LANES;
+		break;
+	default:
+		printk(BIOS_INFO, "PCIe num-lanes %u: invalid value\n",
+		       pcierc->lanes);
+		return;
+	}
+
+	write32(pcierc->dbi_base + PCIE_PORT_LINK_CONTROL, val);
+
+	/* Set link width speed control register */
+	val = read32(pcierc->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+
+	switch (pcierc->lanes) {
+	case 1:
+		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
+		break;
+	case 2:
+		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
+		break;
+	case 4:
+		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
+		break;
+	case 8:
+		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
+		break;
+	default:
+		printk(BIOS_INFO, "PCIe invalid lanes option\n");
+		return;
+	}
+
+	write32(pcierc->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+	/* Setup bus numbers */
+	clrsetbits32(pcierc->dbi_base + PCI_PRIMARY_BUS, TYPE1_HDR_BUS_NUM_MASK,
+		     ROOT_PORT_BUS_NUM);
+
+	/* Disable SMMU */
+	write32(pcierc->parf + PCIE_PARF_BDF_TO_SID_CFG, BDF_TO_SID_BYPASS);
+
+	/* Configure ATU for outbound accesses */
+	qcom_dw_pcie_prog_outbound_atu(PCIE_ATU_REGION_INDEX0,
+				       PCIE_ATU_TYPE_MEM,
+				       pcierc->mem.phys_start,
+				       ROOT_PORT_BDF, pcierc->mem.size);
+
+	/* Program correct class for RC */
+	write16(pcierc->dbi_base + PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_PCI);
+
+	/* Disable write permission right after the update */
+	dw_pcie_dbi_rd_wr(false);
+}
+
+static void qcom_qmp_phy_config_lane(void *base, const struct qcom_qmp_phy_init_tbl tbl[],
+				     unsigned int num, uint8_t ln_mask)
+{
+	unsigned int i;
+	const struct qcom_qmp_phy_init_tbl *t = tbl;
+
+	for (i = 0; i < num; i++, t++) {
+		if (!(t->lane_mask & ln_mask))
+			continue;
+		write32(base + t->offset, t->val);
+	}
+}
+
+static void qcom_qmp_phy_configure(void *base, const struct qcom_qmp_phy_init_tbl tbl[],
+				   unsigned int num)
+{
+	qcom_qmp_phy_config_lane(base, tbl, num, 0xff);
+}
+
+static enum cb_err qcom_qmp_phy_power_on(pcie_qmp_phy_cfg_t *qphy)
+{
+	uint64_t lock_us;
+
+	/* Release powerdown mode and allow endpoint refclk drive */
+	write32(qphy->pcs + QPHY_PCS_PWR_DWN_CNTRL, SW_PWRDN | REFCLK_DRV_DSBL);
+
+	/* Serdes configuration */
+	qcom_qmp_phy_configure(qphy->serdes, qphy->serdes_tbl, qphy->serdes_tbl_num);
+
+	/* Tx, Rx, and PCS configurations */
+	qcom_qmp_phy_config_lane(qphy->tx0, qphy->tx_tbl, qphy->tx_tbl_num, 1);
+	qcom_qmp_phy_config_lane(qphy->tx0, qphy->tx_tbl_sec, qphy->tx_tbl_num_sec, 1);
+	qcom_qmp_phy_config_lane(qphy->tx1, qphy->tx_tbl, qphy->tx_tbl_num, 2);
+	qcom_qmp_phy_config_lane(qphy->tx1, qphy->tx_tbl_sec, qphy->tx_tbl_num_sec, 2);
+	qcom_qmp_phy_config_lane(qphy->rx0, qphy->rx_tbl, qphy->rx_tbl_num, 1);
+	qcom_qmp_phy_config_lane(qphy->rx0, qphy->rx_tbl_sec, qphy->rx_tbl_num_sec, 1);
+	qcom_qmp_phy_config_lane(qphy->rx1, qphy->rx_tbl, qphy->rx_tbl_num, 2);
+	qcom_qmp_phy_config_lane(qphy->rx1, qphy->rx_tbl_sec, qphy->rx_tbl_num_sec, 2);
+	qcom_qmp_phy_configure(qphy->pcs, qphy->pcs_tbl, qphy->pcs_tbl_num);
+	qcom_qmp_phy_configure(qphy->pcs, qphy->pcs_tbl_sec, qphy->pcs_tbl_num_sec);
+	qcom_qmp_phy_configure(qphy->pcs_misc, qphy->pcs_misc_tbl, qphy->pcs_misc_tbl_num);
+	qcom_qmp_phy_configure(qphy->pcs_misc, qphy->pcs_misc_tbl_sec, qphy->pcs_tbl_num_sec);
+
+	/* Release software reset of PCS/Serdes */
+	clrbits32(qphy->pcs + QPHY_SW_RESET, SW_RESET);
+
+	/* start PCS/Serdes to operation mode */
+	write32(qphy->pcs  + QPHY_START_CTRL, PCS_START | SERDES_START);
+
+	/*
+	 * Wait for PHY initialization to be done
+	 * PCS_STATUS: wait for 1ms for PHY STATUS bit to be set
+	 */
+	lock_us = wait_us(1000, !(read32(qphy->qmp_phy_base + QPHY_PCS_STATUS) & PHY_STATUS));
+	if (!lock_us) {
+		printk(BIOS_ERR, "PCIe QMP PHY PLL failed to lock in 1ms\n");
+		return CB_ERR;
+	}
+
+	printk(BIOS_DEBUG, "PCIe QPHY Initialized took %lldus\n", lock_us);
+
+	qcom_dw_pcie_enable_pipe_clock();
+
+	return CB_SUCCESS;
+}
+
+/*
+ * Reset the PCIe PHY core.
+ * Allow 100us delay to ensure reset is asserted.
+ */
+static void qcom_qmp_reset_phy(struct qcom_pcie_cntlr_t *pcie)
+{
+	clock_reset_bcr(pcie->cntlr_cfg->qmp_phy_bcr, 1);
+	udelay(100);
+	clock_reset_bcr(pcie->cntlr_cfg->qmp_phy_bcr, 0);
+}
+
+/*
+ * Reset the PCIe controller core.
+ * Allow 100us delay to ensure reset is asserted.
+ */
+static void qcom_dw_pcie_reset_core(struct qcom_pcie_cntlr_t *pcie)
+{
+	clock_reset_bcr(pcie->cntlr_cfg->pcie_bcr, 1);
+	udelay(100);
+	clock_reset_bcr(pcie->cntlr_cfg->pcie_bcr, 0);
+}
+
+static enum cb_err qcom_dw_pcie_enable(struct qcom_pcie_cntlr_t *pcie)
+{
+	int ret;
+
+	pcie_cntlr_cfg_t *pcierc = pcie->cntlr_cfg;
+	pcie_qmp_phy_cfg_t *qmp_phy = pcie->qmp_phy_cfg;
+
+	/* assert PCIe reset link to keep EP in reset */
+	gpio_set(pcierc->perst, 0);
+
+	/* Enable PCIe controller and SoC specific clocks */
+	ret = qcom_dw_pcie_enable_clock();
+	if (ret) {
+		printk(BIOS_ERR, "Enable PCIe clocks failed\n");
+		return ret;
+	}
+
+	/* Reset the controller */
+	qcom_dw_pcie_reset_core(pcie);
+
+	/* configure PCIe to RC mode */
+	write32(pcierc->parf + PCIE_PARF_DEVICE_TYPE, DEVICE_TYPE_RC);
+
+	/* Power on the PHY */
+	clrbits32(pcierc->parf + PCIE_PARF_PHY_CTRL, PHY_PWR_DOWN);
+
+	/* MAC PHY_POWERDOWN MUX DISABLE */
+	clrbits32(pcierc->parf + PCIE_PARF_SYS_CTRL, MAC_PHY_PWRDOWN_MUX_EN);
+
+	/* Bypass MHI as its not needed */
+	setbits32(pcierc->parf + PCIE_PARF_MHI_CLOCK_RESET_CTRL, MHI_BYPASS);
+
+	qcom_qmp_reset_phy(pcie);
+
+	/* Initialize QMP PHY */
+	ret = qcom_qmp_phy_power_on(qmp_phy);
+	if (ret) {
+		printk(BIOS_ERR, "PCIe PHY init failed\n");
+		return ret;
+	}
+
+	qcom_dw_pcie_setup_rc(pcie);
+
+	/* de-assert PCIe reset link to bring EP out of reset */
+	gpio_set(pcierc->perst, 1);
+
+	/* establisth the link */
+	ret = qcom_pcie_dw_link_up(pcie);
+	if (ret) {
+		printk(BIOS_ERR, "PCIe Link init failed\n");
+		return ret;
+	}
+
+	return CB_SUCCESS;
+}
+
+/* map_bus function for mapping pcie_s_{read/write}_configXX() functions */
+volatile union pci_bank *pci_map_bus(pci_devfn_t dev)
+{
+	void *config_addr = NULL;
+
+	config_addr = qcom_dw_pcie_get_config_addr(&qcom_pcie_cfg, dev);
+	return (void *)config_addr;
+}
+
+/* PCI domain ops read_resources callback */
+void qcom_pci_domain_read_resources(struct device *dev)
+{
+	struct resource *res;
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	/* Initialize the system-wide I/O space constraints. */
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+	res->base = pcierc->io.phys_start;
+	res->limit = pcierc->io.size - 1;
+	res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+	/* Initialize the system-wide memory resources constraints. */
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+	res->base = pcierc->mem.phys_start;
+	res->limit = pcierc->mem.size - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+/* PCI domain ops enable callback */
+void qcom_setup_pcie_host(struct device *dev)
+{
+	gcom_pcie_get_config(&qcom_pcie_cfg);
+
+	/* Ensure PCIe endpoints are powered-on before initiating PCIe link training */
+	gcom_pcie_power_on_ep();
+
+	printk(BIOS_INFO, "Setup PCIe in RC mode\n");
+
+	/* Configure PERST gpio */
+	qcom_pcie_configure_gpios(qcom_pcie_cfg.cntlr_cfg);
+
+	if (!qcom_dw_pcie_enable(&qcom_pcie_cfg))
+		printk(BIOS_NOTICE, "PCIe enumerated succussfully..\n");
+	else
+		printk(BIOS_EMERG, "Failed to enable PCIe\n");
+
+}