diff options
Diffstat (limited to 'src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h | 854 |
1 files changed, 425 insertions, 429 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h index 8a2347ecd490..ed2e9a6c2230 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h @@ -546,18 +546,14 @@ typedef struct { /** Offset 0x019C - Reserved **/ - UINT8 Reserved7[2]; + UINT8 Reserved7[3]; -/** Offset 0x019E - Memory Reference Clock +/** Offset 0x019F - Memory Reference Clock 100MHz, 133MHz. 0:133MHz, 1:100MHz **/ UINT8 RefClk; -/** Offset 0x019F - Reserved -**/ - UINT8 Reserved8; - /** Offset 0x01A0 - Memory Vdd Voltage DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc. @@ -568,7 +564,7 @@ typedef struct { /** Offset 0x01A2 - Reserved **/ - UINT8 Reserved9[4]; + UINT8 Reserved8[4]; /** Offset 0x01A6 - Memory Ratio Automatic or the frequency will equal ratio times reference clock. Set to Auto to @@ -609,7 +605,7 @@ typedef struct { /** Offset 0x01AF - Reserved **/ - UINT8 Reserved10; + UINT8 Reserved9; /** Offset 0x01B0 - tREFI Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected @@ -651,7 +647,7 @@ typedef struct { /** Offset 0x01B8 - Reserved **/ - UINT8 Reserved11[11]; + UINT8 Reserved10[11]; /** Offset 0x01C3 - NMode System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N @@ -687,23 +683,23 @@ typedef struct { /** Offset 0x01D3 - Reserved **/ - UINT8 Reserved12[67]; + UINT8 Reserved11[69]; -/** Offset 0x0216 - MMIO size adjustment for AUTO mode +/** Offset 0x0218 - MMIO size adjustment for AUTO mode Positive number means increasing MMIO size, Negative value means decreasing MMIO size: 0 (Default)=no change to AUTO mode MMIO size **/ UINT16 MmioSizeAdjustment; -/** Offset 0x0218 - Selection of the primary display device +/** Offset 0x021A - Selection of the primary display device 0=iGFX, 3(Default)=AUTO, 4=Hybrid Graphics 0:iGFX, 3:AUTO, 4:Hybrid Graphics **/ UINT8 PrimaryDisplay; -/** Offset 0x0219 - Reserved +/** Offset 0x021B - Reserved **/ - UINT8 Reserved13[3]; + UINT8 Reserved12; /** Offset 0x021C - Temporary MMIO address for GMADR Obsolete field now and it has been extended to 64 bit address, used LMemBar @@ -890,7 +886,7 @@ typedef struct { /** Offset 0x024A - Reserved **/ - UINT8 Reserved14[14]; + UINT8 Reserved13[14]; /** Offset 0x0258 - Per-core HT Disable Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, @@ -917,23 +913,23 @@ typedef struct { /** Offset 0x025C - Reserved **/ - UINT8 Reserved15[50]; + UINT8 Reserved14[47]; -/** Offset 0x028E - DMI Max Link Speed +/** Offset 0x028B - DMI Max Link Speed Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 **/ UINT8 DmiMaxLinkSpeed; -/** Offset 0x028F - DMI Equalization Phase 2 +/** Offset 0x028C - DMI Equalization Phase 2 DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): AUTO - Use the current default method 0:Disable phase2, 1:Enable phase2, 2:Auto **/ UINT8 DmiGen3EqPh2Enable; -/** Offset 0x0290 - DMI Gen3 Equalization Phase3 +/** Offset 0x028D - DMI Gen3 Equalization Phase3 DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static @@ -943,56 +939,56 @@ typedef struct { **/ UINT8 DmiGen3EqPh3Method; -/** Offset 0x0291 - Enable/Disable DMI GEN3 Static EQ Phase1 programming +/** Offset 0x028E - Enable/Disable DMI GEN3 Static EQ Phase1 programming Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming $EN_DIS **/ UINT8 DmiGen3ProgramStaticEq; -/** Offset 0x0292 - DMI Gen3 Root port preset values per lane +/** Offset 0x028F - DMI Gen3 Root port preset values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-9, 4 is default for each lane **/ UINT8 DmiGen3RootPortPreset[8]; -/** Offset 0x029A - DMI Gen3 End port preset values per lane +/** Offset 0x0297 - DMI Gen3 End port preset values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane **/ UINT8 DmiGen3EndPointPreset[8]; -/** Offset 0x02A2 - DMI Gen3 End port Hint values per lane +/** Offset 0x029F - DMI Gen3 End port Hint values per lane Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane **/ UINT8 DmiGen3EndPointHint[8]; -/** Offset 0x02AA - DMI ASPM Configuration:{Combo +/** Offset 0x02A7 - DMI ASPM Configuration:{Combo Set ASPM Configuration 0:Disabled, 1:L0s, 2:L1, 3:L1L0s **/ UINT8 DmiAspm; -/** Offset 0x02AB - Enable/Disable DMI GEN3 Hardware Eq +/** Offset 0x02A8 - Enable/Disable DMI GEN3 Hardware Eq Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming $EN_DIS **/ UINT8 DmiHweq; -/** Offset 0x02AC - Enable/Disable DMI GEN3 Phase 23 Bypass +/** Offset 0x02A9 - Enable/Disable DMI GEN3 Phase 23 Bypass DMIGEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1): Enable Phase 23 Bypass $EN_DIS **/ UINT8 Gen3EqPhase23Bypass; -/** Offset 0x02AD - Enable/Disable DMI GEN3 Phase 3 Bypass +/** Offset 0x02AA - Enable/Disable DMI GEN3 Phase 3 Bypass DMIGEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1): Enable Phase 3 Bypass $EN_DIS **/ UINT8 Gen3EqPhase3Bypass; -/** Offset 0x02AE - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable +/** Offset 0x02AB - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter Coefficient Override @@ -1000,7 +996,7 @@ typedef struct { **/ UINT8 Gen3LtcoEnable; -/** Offset 0x02AF - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable +/** Offset 0x02AC - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default): Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote Transmitter Coefficient/Preset Override @@ -1008,271 +1004,271 @@ typedef struct { **/ UINT8 Gen3RtcoRtpoEnable; -/** Offset 0x02B0 - DMI Gen3 Transmitter Pre-Cursor Coefficient +/** Offset 0x02AD - DMI Gen3 Transmitter Pre-Cursor Coefficient Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, 2 is default for each lane **/ UINT8 DmiGen3Ltcpre[8]; -/** Offset 0x02B8 - DMI Gen3 Transmitter Post-Cursor Coefficient +/** Offset 0x02B5 - DMI Gen3 Transmitter Post-Cursor Coefficient Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default for each lane **/ UINT8 DmiGen3Ltcpo[8]; -/** Offset 0x02C0 - Reserved +/** Offset 0x02BD - Reserved **/ - UINT8 Reserved16[16]; + UINT8 Reserved15[16]; -/** Offset 0x02D0 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable +/** Offset 0x02CD - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, Manual(0x1): Enable DmiGen3DsPresetEnable $EN_DIS **/ UINT8 DmiGen3DsPresetEnable; -/** Offset 0x02D1 - DMI Gen3 Root port preset Rx values per lane +/** Offset 0x02CE - DMI Gen3 Root port preset Rx values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default for each lane **/ UINT8 DmiGen3DsPortRxPreset[8]; -/** Offset 0x02D9 - DMI Gen3 Root port preset Tx values per lane +/** Offset 0x02D6 - DMI Gen3 Root port preset Tx values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default for each lane **/ UINT8 DmiGen3DsPortTxPreset[8]; -/** Offset 0x02E1 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable +/** Offset 0x02DE - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, Manual(0x1): Enable DmiGen3UsPresetEnable $EN_DIS **/ UINT8 DmiGen3UsPresetEnable; -/** Offset 0x02E2 - DMI Gen3 Root port preset Rx values per lane +/** Offset 0x02DF - DMI Gen3 Root port preset Rx values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default for each lane **/ UINT8 DmiGen3UsPortRxPreset[8]; -/** Offset 0x02EA - DMI Gen3 Root port preset Tx values per lane +/** Offset 0x02E7 - DMI Gen3 Root port preset Tx values per lane Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default for each lane **/ UINT8 DmiGen3UsPortTxPreset[8]; -/** Offset 0x02F2 - Reserved +/** Offset 0x02EF - Reserved **/ - UINT8 Reserved17[54]; + UINT8 Reserved16[54]; -/** Offset 0x0328 - DMI ASPM L1 exit Latency +/** Offset 0x0325 - DMI ASPM L1 exit Latency Range: 0-7, 4 is default L1 exit Latency **/ UINT8 DmiAspmL1ExitLatency; -/** Offset 0x0329 - Reserved +/** Offset 0x0326 - Reserved **/ - UINT8 Reserved18[39]; + UINT8 Reserved17[38]; -/** Offset 0x0350 - BIST on Reset +/** Offset 0x034C - BIST on Reset Enable/Disable BIST (Built-In Self Test) on reset. <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 BistOnReset; -/** Offset 0x0351 - Skip Stop PBET Timer Enable/Disable +/** Offset 0x034D - Skip Stop PBET Timer Enable/Disable Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 SkipStopPbet; -/** Offset 0x0352 - Over clocking support +/** Offset 0x034E - Over clocking support Over clocking support; <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 OcSupport; -/** Offset 0x0353 - Over clocking Lock +/** Offset 0x034F - Over clocking Lock Lock Overclocking. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 OcLock; -/** Offset 0x0354 - Maximum Core Turbo Ratio Override +/** Offset 0x0350 - Maximum Core Turbo Ratio Override Maximum core turbo ratio override allows to increase CPU core frequency beyond the fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 if CoreRatioExtensionMode is disabled. 0-120 if CoreRatioExtensionMode is enabled. **/ UINT8 CoreMaxOcRatio; -/** Offset 0x0355 - Core voltage mode +/** Offset 0x0351 - Core voltage mode Core voltage mode; <b>0: Adaptive</b>; 1: Override. $EN_DIS **/ UINT8 CoreVoltageMode; -/** Offset 0x0356 - Maximum clr turbo ratio override +/** Offset 0x0352 - Maximum clr turbo ratio override Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 **/ UINT8 RingMaxOcRatio; -/** Offset 0x0357 - Hyper Threading Enable/Disable +/** Offset 0x0353 - Hyper Threading Enable/Disable Enable or Disable Hyper-Threading Technology. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 HyperThreading; -/** Offset 0x0358 - Enable or Disable CPU Ratio Override +/** Offset 0x0354 - Enable or Disable CPU Ratio Override Enable/Disable CPU Flex Ratio Programming; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 CpuRatioOverride; -/** Offset 0x0359 - CPU ratio value +/** Offset 0x0355 - CPU ratio value This value must be between Max Efficiency Ratio (LFM) and Maximum non-turbo ratio set by Hardware (HFM). Valid Range 0 to 63. **/ UINT8 CpuRatio; -/** Offset 0x035A - Reserved +/** Offset 0x0356 - Reserved **/ - UINT8 Reserved19; + UINT8 Reserved18; -/** Offset 0x035B - Number of active big cores +/** Offset 0x0357 - Number of active big cores Number of P-cores to enable in each processor package. Note: Number of P-Cores and E-Cores are looked at together. When both are {0,0 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores **/ UINT8 ActiveCoreCount; -/** Offset 0x035C - Processor Early Power On Configuration FCLK setting +/** Offset 0x0358 - Processor Early Power On Configuration FCLK setting FCLK frequency can take values of 400MHz, 800MHz and 1GHz. <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- 2: 400 MHz. - 3: Reserved 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved **/ UINT8 FClkFrequency; -/** Offset 0x035D - Enable or Disable VMX +/** Offset 0x0359 - Enable or Disable VMX Enable or Disable VMX, When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 VmxEnable; -/** Offset 0x035E - AVX2 Ratio Offset +/** Offset 0x035A - AVX2 Ratio Offset 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. **/ UINT8 Avx2RatioOffset; -/** Offset 0x035F - AVX3 Ratio Offset +/** Offset 0x035B - AVX3 Ratio Offset 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. **/ UINT8 Avx3RatioOffset; -/** Offset 0x0360 - BCLK Adaptive Voltage Enable +/** Offset 0x035C - BCLK Adaptive Voltage Enable When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: Disable;<b> 1: Enable $EN_DIS **/ UINT8 BclkAdaptiveVoltage; -/** Offset 0x0361 - Reserved +/** Offset 0x035D - Reserved **/ - UINT8 Reserved20; + UINT8 Reserved19; -/** Offset 0x0362 - core voltage override +/** Offset 0x035E - core voltage override The core voltage override which is applied to the entire range of cpu core frequencies. Valid Range 0 to 2000 **/ UINT16 CoreVoltageOverride; -/** Offset 0x0364 - Core Turbo voltage Adaptive +/** Offset 0x0360 - Core Turbo voltage Adaptive Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. Valid Range 0 to 2000 **/ UINT16 CoreVoltageAdaptive; -/** Offset 0x0366 - Core Turbo voltage Offset +/** Offset 0x0362 - Core Turbo voltage Offset The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 **/ UINT16 CoreVoltageOffset; -/** Offset 0x0368 - Core PLL voltage offset +/** Offset 0x0364 - Core PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 **/ UINT8 CorePllVoltageOffset; -/** Offset 0x0369 - Ring Downbin +/** Offset 0x0365 - Ring Downbin Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always lower than the core ratio.0: Disable; <b>1: Enable.</b> $EN_DIS **/ UINT8 RingDownBin; -/** Offset 0x036A - Ring voltage mode +/** Offset 0x0366 - Ring voltage mode Ring voltage mode; <b>0: Adaptive</b>; 1: Override. $EN_DIS **/ UINT8 RingVoltageMode; -/** Offset 0x036B - TjMax Offset +/** Offset 0x0367 - TjMax Offset TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 **/ UINT8 TjMaxOffset; -/** Offset 0x036C - Ring voltage override +/** Offset 0x0368 - Ring voltage override The ring voltage override which is applied to the entire range of cpu ring frequencies. Valid Range 0 to 2000 **/ UINT16 RingVoltageOverride; -/** Offset 0x036E - Ring Turbo voltage Adaptive +/** Offset 0x036A - Ring Turbo voltage Adaptive Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. Valid Range 0 to 2000 **/ UINT16 RingVoltageAdaptive; -/** Offset 0x0370 - Ring Turbo voltage Offset +/** Offset 0x036C - Ring Turbo voltage Offset The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 **/ UINT16 RingVoltageOffset; -/** Offset 0x0372 - Enable or Disable TME +/** Offset 0x036E - Enable or Disable TME Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 TmeEnable; -/** Offset 0x0373 - Enable CPU CrashLog +/** Offset 0x036F - Enable CPU CrashLog Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 CpuCrashLogEnable; -/** Offset 0x0374 - CPU Run Control +/** Offset 0x0370 - CPU Run Control Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: No Change</b> 0:Disabled, 1:Enabled, 2:No Change **/ UINT8 DebugInterfaceEnable; -/** Offset 0x0375 - CPU Run Control Lock +/** Offset 0x0371 - CPU Run Control Lock Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 DebugInterfaceLockEnable; -/** Offset 0x0376 - Reserved +/** Offset 0x0372 - Reserved **/ - UINT8 Reserved21[35]; + UINT8 Reserved20[35]; -/** Offset 0x0399 - Core VF Point Offset Mode +/** Offset 0x0395 - Core VF Point Offset Mode Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes. In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode, setting a selected VF point; <b>0: Legacy</b>; 1: Selection. @@ -1280,54 +1276,54 @@ typedef struct { **/ UINT8 CoreVfPointOffsetMode; -/** Offset 0x039A - Core VF Point Offset +/** Offset 0x0396 - Core VF Point Offset Array used to specifies the Core Voltage Offset applied to the each selected VF Point. This voltage is specified in millivolts. **/ UINT16 CoreVfPointOffset[15]; -/** Offset 0x03B8 - Core VF Point Offset Prefix +/** Offset 0x03B4 - Core VF Point Offset Prefix Sets the CoreVfPointOffset value as positive or negative for corresponding core VF Point; <b>0: Positive </b>; 1: Negative. 0:Positive, 1:Negative **/ UINT8 CoreVfPointOffsetPrefix[15]; -/** Offset 0x03C7 - Core VF Point Ratio +/** Offset 0x03C3 - Core VF Point Ratio Array for the each selected Core VF Point to display the ration. **/ UINT8 CoreVfPointRatio[15]; -/** Offset 0x03D6 - Core VF Point Count +/** Offset 0x03D2 - Core VF Point Count Number of supported Core Voltage & Frequency Point Offset **/ UINT8 CoreVfPointCount; -/** Offset 0x03D7 - Reserved +/** Offset 0x03D3 - Reserved **/ - UINT8 Reserved22[25]; + UINT8 Reserved21[25]; -/** Offset 0x03F0 - Per Core Max Ratio override +/** Offset 0x03EC - Per Core Max Ratio override Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new favored core ratio to each Core. <b>0: Disable</b>, 1: enable $EN_DIS **/ UINT8 PerCoreRatioOverride; -/** Offset 0x03F1 - Reserved +/** Offset 0x03ED - Reserved **/ - UINT8 Reserved23[41]; + UINT8 Reserved22[41]; -/** Offset 0x041A - Per Core Current Max Ratio +/** Offset 0x0416 - Per Core Current Max Ratio Array for the Per Core Max Ratio **/ UINT8 PerCoreRatio[8]; -/** Offset 0x0422 - Reserved +/** Offset 0x041E - Reserved **/ - UINT8 Reserved24[9]; + UINT8 Reserved23[9]; -/** Offset 0x042B - Pvd Ratio Threshold for SOC/CPU die +/** Offset 0x0427 - Pvd Ratio Threshold for SOC/CPU die Array of Pvd Ratio Threshold for SOC/CPU die is the threshold value for input ratio (P0 to Pn) to select the multiplier so that the output is within the DCO frequency range. As per the die selected, this threshold is applied to SA and MC/CMI PLL @@ -1336,76 +1332,76 @@ typedef struct { **/ UINT8 PvdRatioThreshold[2]; -/** Offset 0x042D - Reserved +/** Offset 0x0429 - Reserved **/ - UINT8 Reserved25[70]; + UINT8 Reserved24[70]; -/** Offset 0x0473 - BCLK Frequency Source +/** Offset 0x046F - BCLK Frequency Source Clock source of BCLK OC frequency, <b>0:CPU BCLK</b>, 1:PCH BCLK, 2:External CLK 0:CPU BCLK, 1:PCH BCLK, 2:External CLK **/ UINT8 BclkSource; -/** Offset 0x0474 - GPIO Override +/** Offset 0x0470 - GPIO Override Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for future use **/ UINT8 GpioOverride; -/** Offset 0x0475 - Reserved +/** Offset 0x0471 - Reserved **/ - UINT8 Reserved26[3]; + UINT8 Reserved25[3]; -/** Offset 0x0478 - CPU BCLK OC Frequency +/** Offset 0x0474 - CPU BCLK OC Frequency CPU BCLK OC Frequency in KHz units. 98000000Hz = 98MHz <b>0 - Auto</b>. Range is 40Mhz-1000Mhz. **/ UINT32 CpuBclkOcFrequency; -/** Offset 0x047C - Reserved +/** Offset 0x0478 - Reserved **/ - UINT8 Reserved27[4]; + UINT8 Reserved26[4]; -/** Offset 0x0480 - Enable CPU CrashLog GPRs dump +/** Offset 0x047C - Enable CPU CrashLog GPRs dump Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only disable Smm GPRs dump 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled **/ UINT8 CrashLogGprs; -/** Offset 0x0481 - Reserved +/** Offset 0x047D - Reserved **/ - UINT8 Reserved28[253]; + UINT8 Reserved27[249]; -/** Offset 0x057E - Thermal Design Current enable/disable +/** Offset 0x0576 - Thermal Design Current enable/disable Thermal Design Current enable/disable; <b>0: Disable</b>; 1: Enable. [0] for IA, [1] for GT, [2] for SA, [3] through [5] are Reserved. **/ UINT8 TdcEnable[6]; -/** Offset 0x0584 - Thermal Design Current time window +/** Offset 0x057C - Thermal Design Current time window TDC Time Window, value of IA either in milliseconds or seconds, value of GT/SA is in milliseconds. 1ms is default. Range of IA from 1ms to 448s, Range of GT/SA is 1ms to 10ms, except for 9ms. 9ms has no valid encoding in the MSR definition. **/ UINT32 TdcTimeWindow[6]; -/** Offset 0x059C - Reserved +/** Offset 0x0594 - Reserved **/ - UINT8 Reserved29[204]; + UINT8 Reserved28[204]; -/** Offset 0x0668 - BiosGuard +/** Offset 0x0660 - BiosGuard Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable $EN_DIS **/ UINT8 BiosGuard; -/** Offset 0x0669 +/** Offset 0x0661 **/ UINT8 BiosGuardToolsInterface; -/** Offset 0x066A - Txt +/** Offset 0x0662 - Txt Enables utilization of additional hardware capabilities provided by Intel (R) Trusted Execution Technology. Changes require a full power cycle to take effect. <b>0: Disable</b>, 1: Enable @@ -1413,1246 +1409,1246 @@ typedef struct { **/ UINT8 Txt; -/** Offset 0x066B - Reserved +/** Offset 0x0663 - Reserved **/ - UINT8 Reserved30; + UINT8 Reserved29; -/** Offset 0x066C - PrmrrSize +/** Offset 0x0664 - PrmrrSize Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable **/ UINT32 PrmrrSize; -/** Offset 0x0670 - SinitMemorySize +/** Offset 0x0668 - SinitMemorySize Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable **/ UINT32 SinitMemorySize; -/** Offset 0x0674 - Reserved +/** Offset 0x066C - Reserved **/ - UINT8 Reserved31[4]; + UINT8 Reserved30[4]; -/** Offset 0x0678 - TxtDprMemoryBase +/** Offset 0x0670 - TxtDprMemoryBase Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable **/ UINT64 TxtDprMemoryBase; -/** Offset 0x0680 - TxtHeapMemorySize +/** Offset 0x0678 - TxtHeapMemorySize Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable **/ UINT32 TxtHeapMemorySize; -/** Offset 0x0684 - TxtDprMemorySize +/** Offset 0x067C - TxtDprMemorySize Reserve DPR memory size (0-255) MB. 0: Disable, define default value of TxtDprMemorySize , 1: enable **/ UINT32 TxtDprMemorySize; -/** Offset 0x0688 - BiosAcmBase +/** Offset 0x0680 - BiosAcmBase Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable **/ UINT32 BiosAcmBase; -/** Offset 0x068C - BiosAcmSize +/** Offset 0x0684 - BiosAcmSize Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable **/ UINT32 BiosAcmSize; -/** Offset 0x0690 - ApStartupBase +/** Offset 0x0688 - ApStartupBase Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable **/ UINT32 ApStartupBase; -/** Offset 0x0694 - TgaSize +/** Offset 0x068C - TgaSize Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable **/ UINT32 TgaSize; -/** Offset 0x0698 - TxtLcpPdBase +/** Offset 0x0690 - TxtLcpPdBase Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable **/ UINT64 TxtLcpPdBase; -/** Offset 0x06A0 - TxtLcpPdSize +/** Offset 0x0698 - TxtLcpPdSize Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable **/ UINT64 TxtLcpPdSize; -/** Offset 0x06A8 - IsTPMPresence +/** Offset 0x06A0 - IsTPMPresence IsTPMPresence default values **/ UINT8 IsTPMPresence; -/** Offset 0x06A9 - Reserved +/** Offset 0x06A1 - Reserved **/ - UINT8 Reserved32[32]; + UINT8 Reserved31[32]; -/** Offset 0x06C9 - Enable PCH HSIO PCIE Rx Set Ctle +/** Offset 0x06C1 - Enable PCH HSIO PCIE Rx Set Ctle Enable PCH PCIe Gen 3 Set CTLE Value. **/ UINT8 PchPcieHsioRxSetCtleEnable[28]; -/** Offset 0x06E5 - PCH HSIO PCIE Rx Set Ctle Value +/** Offset 0x06DD - PCH HSIO PCIE Rx Set Ctle Value PCH PCIe Gen 3 Set CTLE Value. **/ UINT8 PchPcieHsioRxSetCtle[28]; -/** Offset 0x0701 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override +/** Offset 0x06F9 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28]; -/** Offset 0x071D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value +/** Offset 0x0715 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchPcieHsioTxGen1DownscaleAmp[28]; -/** Offset 0x0739 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override +/** Offset 0x0731 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28]; -/** Offset 0x0755 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value +/** Offset 0x074D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchPcieHsioTxGen2DownscaleAmp[28]; -/** Offset 0x0771 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override +/** Offset 0x0769 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28]; -/** Offset 0x078D - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value +/** Offset 0x0785 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchPcieHsioTxGen3DownscaleAmp[28]; -/** Offset 0x07A9 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override +/** Offset 0x07A1 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen1DeEmphEnable[28]; -/** Offset 0x07C5 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value +/** Offset 0x07BD - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. **/ UINT8 PchPcieHsioTxGen1DeEmph[28]; -/** Offset 0x07E1 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override +/** Offset 0x07D9 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28]; -/** Offset 0x07FD - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value +/** Offset 0x07F5 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. **/ UINT8 PchPcieHsioTxGen2DeEmph3p5[28]; -/** Offset 0x0819 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override +/** Offset 0x0811 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28]; -/** Offset 0x0835 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value +/** Offset 0x082D - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. **/ UINT8 PchPcieHsioTxGen2DeEmph6p0[28]; -/** Offset 0x0851 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override +/** Offset 0x0849 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; -/** Offset 0x0859 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value +/** Offset 0x0851 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. **/ UINT8 PchSataHsioRxGen1EqBoostMag[8]; -/** Offset 0x0861 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override +/** Offset 0x0859 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; -/** Offset 0x0869 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value +/** Offset 0x0861 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. **/ UINT8 PchSataHsioRxGen2EqBoostMag[8]; -/** Offset 0x0871 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override +/** Offset 0x0869 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; -/** Offset 0x0879 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value +/** Offset 0x0871 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. **/ UINT8 PchSataHsioRxGen3EqBoostMag[8]; -/** Offset 0x0881 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override +/** Offset 0x0879 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; -/** Offset 0x0889 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value +/** Offset 0x0881 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchSataHsioTxGen1DownscaleAmp[8]; -/** Offset 0x0891 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override +/** Offset 0x0889 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; -/** Offset 0x0899 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value +/** Offset 0x0891 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchSataHsioTxGen2DownscaleAmp[8]; -/** Offset 0x08A1 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override +/** Offset 0x0899 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; -/** Offset 0x08A9 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value +/** Offset 0x08A1 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. **/ UINT8 PchSataHsioTxGen3DownscaleAmp[8]; -/** Offset 0x08B1 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override +/** Offset 0x08A9 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen1DeEmphEnable[8]; -/** Offset 0x08B9 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting +/** Offset 0x08B1 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. **/ UINT8 PchSataHsioTxGen1DeEmph[8]; -/** Offset 0x08C1 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override +/** Offset 0x08B9 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen2DeEmphEnable[8]; -/** Offset 0x08C9 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting +/** Offset 0x08C1 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. **/ UINT8 PchSataHsioTxGen2DeEmph[8]; -/** Offset 0x08D1 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override +/** Offset 0x08C9 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override 0: Disable; 1: Enable. **/ UINT8 PchSataHsioTxGen3DeEmphEnable[8]; -/** Offset 0x08D9 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting +/** Offset 0x08D1 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. **/ UINT8 PchSataHsioTxGen3DeEmph[8]; -/** Offset 0x08E1 - PCH LPC Enhance the port 8xh decoding +/** Offset 0x08D9 - PCH LPC Enhance the port 8xh decoding Original LPC only decodes one byte of port 80h. $EN_DIS **/ UINT8 PchLpcEnhancePort8xhDecoding; -/** Offset 0x08E2 - PCH Port80 Route +/** Offset 0x08DA - PCH Port80 Route Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. $EN_DIS **/ UINT8 PchPort80Route; -/** Offset 0x08E3 - Enable SMBus ARP support +/** Offset 0x08DB - Enable SMBus ARP support Enable SMBus ARP support. $EN_DIS **/ UINT8 SmbusArpEnable; -/** Offset 0x08E4 - Number of RsvdSmbusAddressTable. +/** Offset 0x08DC - Number of RsvdSmbusAddressTable. The number of elements in the RsvdSmbusAddressTable. **/ UINT8 PchNumRsvdSmbusAddresses; -/** Offset 0x08E5 - Reserved +/** Offset 0x08DD - Reserved **/ - UINT8 Reserved33; + UINT8 Reserved32; -/** Offset 0x08E6 - SMBUS Base Address +/** Offset 0x08DE - SMBUS Base Address SMBUS Base Address (IO space). **/ UINT16 PchSmbusIoBase; -/** Offset 0x08E8 - Enable SMBus Alert Pin +/** Offset 0x08E0 - Enable SMBus Alert Pin Enable SMBus Alert Pin. $EN_DIS **/ UINT8 PchSmbAlertEnable; -/** Offset 0x08E9 - Usage type for ClkSrc +/** Offset 0x08E1 - Usage type for ClkSrc 0-23: PCH rootport, 0x70:LAN, 0x80: unspecified but in use (free running), 0xFF: not used **/ UINT8 PcieClkSrcUsage[18]; -/** Offset 0x08FB - Reserved +/** Offset 0x08F3 - Reserved **/ - UINT8 Reserved34[14]; + UINT8 Reserved33[14]; -/** Offset 0x0909 - ClkReq-to-ClkSrc mapping +/** Offset 0x0901 - ClkReq-to-ClkSrc mapping Number of ClkReq signal assigned to ClkSrc **/ UINT8 PcieClkSrcClkReq[18]; -/** Offset 0x091B - Reserved +/** Offset 0x0913 - Reserved **/ - UINT8 Reserved35[53]; + UINT8 Reserved34[53]; -/** Offset 0x0950 - Enable PCIE RP Mask +/** Offset 0x0948 - Enable PCIE RP Mask Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 for port1, bit1 for port2, and so on. **/ UINT32 PcieRpEnableMask; -/** Offset 0x0954 - VC Type +/** Offset 0x094C - VC Type Virtual Channel Type Select: 0: VC0, 1: VC1. 0: VC0, 1: VC1 **/ UINT8 PchHdaVcType; -/** Offset 0x0955 - Universal Audio Architecture compliance for DSP enabled system +/** Offset 0x094D - Universal Audio Architecture compliance for DSP enabled system 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox driver or SST driver supported). $EN_DIS **/ UINT8 PchHdaDspUaaCompliance; -/** Offset 0x0956 - Enable HD Audio Link +/** Offset 0x094E - Enable HD Audio Link Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. $EN_DIS **/ UINT8 PchHdaAudioLinkHdaEnable; -/** Offset 0x0957 - Enable HDA SDI lanes +/** Offset 0x094F - Enable HDA SDI lanes Enable/disable HDA SDI lanes. **/ UINT8 PchHdaSdiEnable[2]; -/** Offset 0x0959 - HDA Power/Clock Gating (PGD/CGD) +/** Offset 0x0951 - HDA Power/Clock Gating (PGD/CGD) Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE. 0: POR, 1: Force Enable, 2: Force Disable **/ UINT8 PchHdaTestPowerClockGating; -/** Offset 0x095A - Enable HD Audio DMIC_N Link +/** Offset 0x0952 - Enable HD Audio DMIC_N Link Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. **/ UINT8 PchHdaAudioLinkDmicEnable[2]; -/** Offset 0x095C - DMIC<N> ClkA Pin Muxing (N - DMIC number) +/** Offset 0x0954 - DMIC<N> ClkA Pin Muxing (N - DMIC number) Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* **/ UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; -/** Offset 0x0964 - DMIC<N> ClkB Pin Muxing +/** Offset 0x095C - DMIC<N> ClkB Pin Muxing Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* **/ UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; -/** Offset 0x096C - Enable HD Audio DSP +/** Offset 0x0964 - Enable HD Audio DSP Enable/disable HD Audio DSP feature. $EN_DIS **/ UINT8 PchHdaDspEnable; -/** Offset 0x096D - Reserved +/** Offset 0x0965 - Reserved **/ - UINT8 Reserved36[3]; + UINT8 Reserved35[3]; -/** Offset 0x0970 - DMIC<N> Data Pin Muxing +/** Offset 0x0968 - DMIC<N> Data Pin Muxing Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* **/ UINT32 PchHdaAudioLinkDmicDataPinMux[2]; -/** Offset 0x0978 - Enable HD Audio SSP0 Link +/** Offset 0x0970 - Enable HD Audio SSP0 Link Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 **/ UINT8 PchHdaAudioLinkSspEnable[6]; -/** Offset 0x097E - Enable HD Audio SoundWire#N Link +/** Offset 0x0976 - Enable HD Audio SoundWire#N Link Enable/disable HD Audio SNDW#N link. Muxed with HDA. **/ UINT8 PchHdaAudioLinkSndwEnable[4]; -/** Offset 0x0982 - iDisp-Link Frequency +/** Offset 0x097A - iDisp-Link Frequency iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. 4: 96MHz, 3: 48MHz **/ UINT8 PchHdaIDispLinkFrequency; -/** Offset 0x0983 - Reserved +/** Offset 0x097B - Reserved **/ - UINT8 Reserved37; + UINT8 Reserved36; -/** Offset 0x0984 - iDisp-Link T-mode +/** Offset 0x097C - iDisp-Link T-mode iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T 0: 2T, 2: 4T, 3: 8T, 4: 16T **/ UINT8 PchHdaIDispLinkTmode; -/** Offset 0x0985 - iDisplay Audio Codec disconnection +/** Offset 0x097D - iDisplay Audio Codec disconnection 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. $EN_DIS **/ UINT8 PchHdaIDispCodecDisconnect; -/** Offset 0x0986 - Reserved +/** Offset 0x097E - Reserved **/ - UINT8 Reserved38[6]; + UINT8 Reserved37[6]; -/** Offset 0x098C - CNVi DDR RFI Mitigation +/** Offset 0x0984 - CNVi DDR RFI Mitigation Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE $EN_DIS **/ UINT8 CnviDdrRfim; -/** Offset 0x098D - Reserved +/** Offset 0x0985 - Reserved **/ - UINT8 Reserved39[11]; + UINT8 Reserved38[11]; -/** Offset 0x0998 - Debug Interfaces +/** Offset 0x0990 - Debug Interfaces Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, BIT2 - Not used. **/ UINT8 PcdDebugInterfaceFlags; -/** Offset 0x0999 - Serial Io Uart Debug Controller Number +/** Offset 0x0991 - Serial Io Uart Debug Controller Number Select SerialIo Uart Controller for debug. 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 **/ UINT8 SerialIoUartDebugControllerNumber; -/** Offset 0x099A - Serial Io Uart Debug Auto Flow +/** Offset 0x0992 - Serial Io Uart Debug Auto Flow Enables UART hardware flow control, CTS and RTS lines. $EN_DIS **/ UINT8 SerialIoUartDebugAutoFlow; -/** Offset 0x099B - Reserved +/** Offset 0x0993 - Reserved **/ - UINT8 Reserved40; + UINT8 Reserved39; -/** Offset 0x099C - Serial Io Uart Debug BaudRate +/** Offset 0x0994 - Serial Io Uart Debug BaudRate Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 **/ UINT32 SerialIoUartDebugBaudRate; -/** Offset 0x09A0 - Serial Io Uart Debug Parity +/** Offset 0x0998 - Serial Io Uart Debug Parity Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity **/ UINT8 SerialIoUartDebugParity; -/** Offset 0x09A1 - Serial Io Uart Debug Stop Bits +/** Offset 0x0999 - Serial Io Uart Debug Stop Bits Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits **/ UINT8 SerialIoUartDebugStopBits; -/** Offset 0x09A2 - Serial Io Uart Debug Data Bits +/** Offset 0x099A - Serial Io Uart Debug Data Bits Set default word length. 0: Default, 5,6,7,8 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS **/ UINT8 SerialIoUartDebugDataBits; -/** Offset 0x09A3 - Reserved +/** Offset 0x099B - Reserved **/ - UINT8 Reserved41; + UINT8 Reserved40; -/** Offset 0x09A4 - Serial Io Uart Debug Mmio Base +/** Offset 0x099C - Serial Io Uart Debug Mmio Base Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode = SerialIoUartPci. **/ UINT32 SerialIoUartDebugMmioBase; -/** Offset 0x09A8 - ISA Serial Base selection +/** Offset 0x09A0 - ISA Serial Base selection Select ISA Serial Base address. Default is 0x3F8. 0:0x3F8, 1:0x2F8 **/ UINT8 PcdIsaSerialUartBase; -/** Offset 0x09A9 - Reserved +/** Offset 0x09A1 - Reserved **/ - UINT8 Reserved42; + UINT8 Reserved41; -/** Offset 0x09AA - Ring PLL voltage offset +/** Offset 0x09A2 - Ring PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 **/ UINT8 RingPllVoltageOffset; -/** Offset 0x09AB - System Agent PLL voltage offset +/** Offset 0x09A3 - System Agent PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 **/ UINT8 SaPllVoltageOffset; -/** Offset 0x09AC - Memory Controller PLL voltage offset +/** Offset 0x09A4 - Reserved +**/ + UINT8 Reserved42; + +/** Offset 0x09A5 - Memory Controller PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 **/ UINT8 McPllVoltageOffset; -/** Offset 0x09AD - TCSS Thunderbolt PCIE Root Port 0 Enable +/** Offset 0x09A6 - TCSS Thunderbolt PCIE Root Port 0 Enable Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssItbtPcie0En; -/** Offset 0x09AE - TCSS Thunderbolt PCIE Root Port 1 Enable +/** Offset 0x09A7 - TCSS Thunderbolt PCIE Root Port 1 Enable Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssItbtPcie1En; -/** Offset 0x09AF - TCSS Thunderbolt PCIE Root Port 2 Enable +/** Offset 0x09A8 - TCSS Thunderbolt PCIE Root Port 2 Enable Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssItbtPcie2En; -/** Offset 0x09B0 - TCSS Thunderbolt PCIE Root Port 3 Enable +/** Offset 0x09A9 - TCSS Thunderbolt PCIE Root Port 3 Enable Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssItbtPcie3En; -/** Offset 0x09B1 - TCSS USB HOST (xHCI) Enable +/** Offset 0x09AA - TCSS USB HOST (xHCI) Enable Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below $EN_DIS **/ UINT8 TcssXhciEn; -/** Offset 0x09B2 - TCSS USB DEVICE (xDCI) Enable +/** Offset 0x09AB - TCSS USB DEVICE (xDCI) Enable Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled $EN_DIS **/ UINT8 TcssXdciEn; -/** Offset 0x09B3 - TCSS DMA0 Enable +/** Offset 0x09AC - TCSS DMA0 Enable Set TCSS DMA0. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssDma0En; -/** Offset 0x09B4 - TCSS DMA1 Enable +/** Offset 0x09AD - TCSS DMA1 Enable Set TCSS DMA1. 0:Disabled 1:Enabled $EN_DIS **/ UINT8 TcssDma1En; -/** Offset 0x09B5 - PcdSerialDebugBaudRate +/** Offset 0x09AE - PcdSerialDebugBaudRate Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. 3:9600, 4:19200, 6:56700, 7:115200 **/ UINT8 PcdSerialDebugBaudRate; -/** Offset 0x09B6 - HobBufferSize +/** Offset 0x09AF - HobBufferSize Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB total HOB size). 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value **/ UINT8 HobBufferSize; -/** Offset 0x09B7 - Early Command Training +/** Offset 0x09B0 - Early Command Training Enables/Disable Early Command Training $EN_DIS **/ UINT8 ECT; -/** Offset 0x09B8 - SenseAmp Offset Training +/** Offset 0x09B1 - SenseAmp Offset Training Enables/Disable SenseAmp Offset Training $EN_DIS **/ UINT8 SOT; -/** Offset 0x09B9 - Early ReadMPR Timing Centering 2D +/** Offset 0x09B2 - Early ReadMPR Timing Centering 2D Enables/Disable Early ReadMPR Timing Centering 2D $EN_DIS **/ UINT8 ERDMPRTC2D; -/** Offset 0x09BA - Read MPR Training +/** Offset 0x09B3 - Read MPR Training Enables/Disable Read MPR Training $EN_DIS **/ UINT8 RDMPRT; -/** Offset 0x09BB - Receive Enable Training +/** Offset 0x09B4 - Receive Enable Training Enables/Disable Receive Enable Training $EN_DIS **/ UINT8 RCVET; -/** Offset 0x09BC - Jedec Write Leveling +/** Offset 0x09B5 - Jedec Write Leveling Enables/Disable Jedec Write Leveling $EN_DIS **/ UINT8 JWRL; -/** Offset 0x09BD - Early Write Time Centering 2D +/** Offset 0x09B6 - Early Write Time Centering 2D Enables/Disable Early Write Time Centering 2D $EN_DIS **/ UINT8 EWRTC2D; -/** Offset 0x09BE - Early Read Time Centering 2D +/** Offset 0x09B7 - Early Read Time Centering 2D Enables/Disable Early Read Time Centering 2D $EN_DIS **/ UINT8 ERDTC2D; -/** Offset 0x09BF - Reserved +/** Offset 0x09B8 - Reserved **/ UINT8 Reserved43; -/** Offset 0x09C0 - Write Timing Centering 1D +/** Offset 0x09B9 - Write Timing Centering 1D Enables/Disable Write Timing Centering 1D $EN_DIS **/ UINT8 WRTC1D; -/** Offset 0x09C1 - Write Voltage Centering 1D +/** Offset 0x09BA - Write Voltage Centering 1D Enables/Disable Write Voltage Centering 1D $EN_DIS **/ UINT8 WRVC1D; -/** Offset 0x09C2 - Read Timing Centering 1D +/** Offset 0x09BB - Read Timing Centering 1D Enables/Disable Read Timing Centering 1D $EN_DIS **/ UINT8 RDTC1D; -/** Offset 0x09C3 - Read Voltage Centering 1D +/** Offset 0x09BC - Read Voltage Centering 1D Enable/Disable Read Voltage Centering 1D $EN_DIS **/ UINT8 RDVC1D; -/** Offset 0x09C4 - Reserved +/** Offset 0x09BD - Reserved **/ UINT8 Reserved44[2]; -/** Offset 0x09C6 - Read ODT Training +/** Offset 0x09BF - Read ODT Training Enables/Disable Read ODT Training $EN_DIS **/ UINT8 RDODTT; -/** Offset 0x09C7 - Read Equalization Training +/** Offset 0x09C0 - Read Equalization Training Enables/Disable Read Equalization Training $EN_DIS **/ UINT8 RDEQT; -/** Offset 0x09C8 - Reserved +/** Offset 0x09C1 - Reserved **/ UINT8 Reserved45; -/** Offset 0x09C9 - Write Timing Centering 2D +/** Offset 0x09C2 - Write Timing Centering 2D Enables/Disable Write Timing Centering 2D $EN_DIS **/ UINT8 WRTC2D; -/** Offset 0x09CA - Read Timing Centering 2D +/** Offset 0x09C3 - Read Timing Centering 2D Enables/Disable Read Timing Centering 2D $EN_DIS **/ UINT8 RDTC2D; -/** Offset 0x09CB - Write Voltage Centering 2D +/** Offset 0x09C4 - Write Voltage Centering 2D Enables/Disable Write Voltage Centering 2D $EN_DIS **/ UINT8 WRVC2D; -/** Offset 0x09CC - Read Voltage Centering 2D +/** Offset 0x09C5 - Read Voltage Centering 2D Enables/Disable Read Voltage Centering 2D $EN_DIS **/ UINT8 RDVC2D; -/** Offset 0x09CD - Command Voltage Centering +/** Offset 0x09C6 - Command Voltage Centering Enables/Disable Command Voltage Centering $EN_DIS **/ UINT8 CMDVC; -/** Offset 0x09CE - Late Command Training +/** Offset 0x09C7 - Late Command Training Enables/Disable Late Command Training $EN_DIS **/ UINT8 LCT; -/** Offset 0x09CF - Turn Around Timing Training +/** Offset 0x09C8 - Turn Around Timing Training Enables/Disable Turn Around Timing Training $EN_DIS **/ UINT8 TAT; -/** Offset 0x09D0 - Rank Margin Tool +/** Offset 0x09C9 - Rank Margin Tool Enable/disable Rank Margin Tool $EN_DIS **/ UINT8 RMT; -/** Offset 0x09D1 - Reserved +/** Offset 0x09CA - Reserved **/ UINT8 Reserved46; -/** Offset 0x09D2 - DIMM SPD Alias Test +/** Offset 0x09CB - DIMM SPD Alias Test Enables/Disable DIMM SPD Alias Test $EN_DIS **/ UINT8 ALIASCHK; -/** Offset 0x09D3 - Retrain Margin Check +/** Offset 0x09CC - Retrain Margin Check Enables/Disable Retrain Margin Check $EN_DIS **/ UINT8 RMC; -/** Offset 0x09D4 - Reserved +/** Offset 0x09CD - Reserved **/ UINT8 Reserved47; -/** Offset 0x09D5 - Dimm ODT Training +/** Offset 0x09CE - Dimm ODT Training Enables/Disable Dimm ODT Training $EN_DIS **/ UINT8 DIMMODTT; -/** Offset 0x09D6 - DIMM RON Training +/** Offset 0x09CF - DIMM RON Training Enables/Disable DIMM RON Training $EN_DIS **/ UINT8 DIMMRONT; -/** Offset 0x09D7 - TxDqTCO Comp Training +/** Offset 0x09D0 - TxDqTCO Comp Training Enable/Disable TxDqTCO Comp Training $EN_DIS **/ UINT8 TXTCO; -/** Offset 0x09D8 - ClkTCO Comp Training +/** Offset 0x09D1 - ClkTCO Comp Training Enable/Disable ClkTCO Comp Training $EN_DIS **/ UINT8 CLKTCO; -/** Offset 0x09D9 - CMD Slew Rate Training +/** Offset 0x09D2 - CMD Slew Rate Training Enable/Disable CMD Slew Rate Training $EN_DIS **/ UINT8 CMDSR; -/** Offset 0x09DA - Reserved +/** Offset 0x09D3 - Reserved **/ UINT8 Reserved48[2]; -/** Offset 0x09DC - DIMM CA ODT Training +/** Offset 0x09D5 - DIMM CA ODT Training Enable/Disable DIMM CA ODT Training $EN_DIS **/ UINT8 DIMMODTCA; -/** Offset 0x09DD - Reserved +/** Offset 0x09D6 - Reserved **/ UINT8 Reserved49[3]; -/** Offset 0x09E0 - Read Vref Decap Training +/** Offset 0x09D9 - Read Vref Decap Training Enable/Disable Read Vref Decap Training $EN_DIS **/ UINT8 RDVREFDC; -/** Offset 0x09E1 - Vddq Training +/** Offset 0x09DA - Vddq Training Enable/Disable Vddq Training $EN_DIS **/ UINT8 VDDQT; -/** Offset 0x09E2 - Rank Margin Tool Per Bit +/** Offset 0x09DB - Rank Margin Tool Per Bit Enable/Disable Rank Margin Tool Per Bit $EN_DIS **/ UINT8 RMTBIT; -/** Offset 0x09E3 - Reserved +/** Offset 0x09DC - Reserved **/ UINT8 Reserved50[4]; -/** Offset 0x09E7 - Duty Cycle Correction Training +/** Offset 0x09E0 - Duty Cycle Correction Training Enable/Disable Duty Cycle Correction Training $EN_DIS **/ UINT8 DCC; -/** Offset 0x09E8 - Reserved +/** Offset 0x09E1 - Reserved **/ UINT8 Reserved51[17]; -/** Offset 0x09F9 - ECC Support +/** Offset 0x09F2 - ECC Support Enables/Disable ECC Support $EN_DIS **/ UINT8 EccSupport; -/** Offset 0x09FA - Ibecc +/** Offset 0x09F3 - Ibecc In-Band ECC Support $EN_DIS **/ UINT8 Ibecc; -/** Offset 0x09FB - IbeccParity +/** Offset 0x09F4 - IbeccParity In-Band ECC Parity Control $EN_DIS **/ UINT8 IbeccParity; -/** Offset 0x09FC - IbeccOperationMode +/** Offset 0x09F5 - IbeccOperationMode In-Band ECC Operation Mode 0:Protect base on address range, 1: Non-protected, 2: All protected **/ UINT8 IbeccOperationMode; -/** Offset 0x09FD - IbeccProtectedRegionEnable +/** Offset 0x09F6 - IbeccProtectedRegionEnable In-Band ECC Protected Region Enable $EN_DIS **/ UINT8 IbeccProtectedRegionEnable[8]; -/** Offset 0x0A05 - Reserved -**/ - UINT8 Reserved52; - -/** Offset 0x0A06 - IbeccProtectedRegionBases +/** Offset 0x09FE - IbeccProtectedRegionBases IBECC Protected Region Bases per IBECC instance **/ UINT16 IbeccProtectedRegionBase[8]; -/** Offset 0x0A16 - IbeccProtectedRegionMasks +/** Offset 0x0A0E - IbeccProtectedRegionMasks IBECC Protected Region Masks **/ UINT16 IbeccProtectedRegionMask[8]; -/** Offset 0x0A26 - IbeccProtectedRegionOverallBases +/** Offset 0x0A1E - IbeccProtectedRegionOverallBases IBECC Protected Region Bases based on enabled IBECC instance **/ UINT16 IbeccProtectedRegionOverallBase[8]; -/** Offset 0x0A36 - Memory Remap +/** Offset 0x0A2E - Memory Remap Enables/Disable Memory Remap $EN_DIS **/ UINT8 RemapEnable; -/** Offset 0x0A37 - Rank Interleave support +/** Offset 0x0A2F - Rank Interleave support Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at the same time. $EN_DIS **/ UINT8 RankInterleave; -/** Offset 0x0A38 - Enhanced Interleave support +/** Offset 0x0A30 - Enhanced Interleave support Enables/Disable Enhanced Interleave support $EN_DIS **/ UINT8 EnhancedInterleave; -/** Offset 0x0A39 - Ch Hash Support +/** Offset 0x0A31 - Ch Hash Support Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode $EN_DIS **/ UINT8 ChHashEnable; -/** Offset 0x0A3A - Extern Therm Status +/** Offset 0x0A32 - Extern Therm Status Enables/Disable Extern Therm Status $EN_DIS **/ UINT8 EnableExtts; -/** Offset 0x0A3B - DDR PowerDown and idle counter +/** Offset 0x0A33 - DDR PowerDown and idle counter Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) $EN_DIS **/ UINT8 EnablePwrDn; -/** Offset 0x0A3C - DDR PowerDown and idle counter +/** Offset 0x0A34 - DDR PowerDown and idle counter Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) $EN_DIS **/ UINT8 EnablePwrDnLpddr; -/** Offset 0x0A3D - SelfRefresh Enable +/** Offset 0x0A35 - SelfRefresh Enable Enables/Disable SelfRefresh Enable $EN_DIS **/ UINT8 SrefCfgEna; -/** Offset 0x0A3E - Throttler CKEMin Defeature +/** Offset 0x0A36 - Throttler CKEMin Defeature Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) $EN_DIS **/ UINT8 ThrtCkeMinDefeatLpddr; -/** Offset 0x0A3F - Throttler CKEMin Defeature +/** Offset 0x0A37 - Throttler CKEMin Defeature Enables/Disable Throttler CKEMin Defeature $EN_DIS **/ UINT8 ThrtCkeMinDefeat; -/** Offset 0x0A40 - Reserved +/** Offset 0x0A38 - Reserved **/ - UINT8 Reserved53; + UINT8 Reserved52; -/** Offset 0x0A41 - Exit On Failure (MRC) +/** Offset 0x0A39 - Exit On Failure (MRC) Enables/Disable Exit On Failure (MRC) $EN_DIS **/ UINT8 ExitOnFailure; -/** Offset 0x0A42 - Reserved +/** Offset 0x0A3A - Reserved **/ - UINT8 Reserved54[4]; + UINT8 Reserved53[4]; -/** Offset 0x0A46 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP +/** Offset 0x0A3E - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP $EN_DIS **/ UINT8 Ddr4DdpSharedZq; -/** Offset 0x0A47 - Ch Hash Interleaved Bit +/** Offset 0x0A3F - Ch Hash Interleaved Bit Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 **/ UINT8 ChHashInterleaveBit; -/** Offset 0x0A48 - Ch Hash Mask +/** Offset 0x0A40 - Ch Hash Mask Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to BITS [19:6] Default is 0x30CC **/ UINT16 ChHashMask; -/** Offset 0x0A4A - Reserved +/** Offset 0x0A42 - Reserved **/ - UINT8 Reserved55[2]; + UINT8 Reserved54[2]; -/** Offset 0x0A4C - Base reference clock value +/** Offset 0x0A44 - Base reference clock value Base reference clock value, in Hertz(Default is 125Hz) 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz **/ UINT32 BClkFrequency; -/** Offset 0x0A50 - EPG DIMM Idd3N +/** Offset 0x0A48 - EPG DIMM Idd3N Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on a per DIMM basis. Default is 26 **/ UINT16 Idd3n; -/** Offset 0x0A52 - EPG DIMM Idd3P +/** Offset 0x0A4A - EPG DIMM Idd3P Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated on a per DIMM basis. Default is 11 **/ UINT16 Idd3p; -/** Offset 0x0A54 - CMD Normalization +/** Offset 0x0A4C - CMD Normalization Enable/Disable CMD Normalization $EN_DIS **/ UINT8 CMDNORM; -/** Offset 0x0A55 - Early DQ Write Drive Strength and Equalization Training +/** Offset 0x0A4D - Early DQ Write Drive Strength and Equalization Training Enable/Disable Early DQ Write Drive Strength and Equalization Training $EN_DIS **/ UINT8 EWRDSEQ; -/** Offset 0x0A56 - Idle Energy Mc0Ch0Dimm0 +/** Offset 0x0A4E - Idle Energy Mc0Ch0Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc0Ch0Dimm0; -/** Offset 0x0A57 - Idle Energy Mc0Ch0Dimm1 +/** Offset 0x0A4F - Idle Energy Mc0Ch0Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc0Ch0Dimm1; -/** Offset 0x0A58 - Idle Energy Mc0Ch1Dimm0 +/** Offset 0x0A50 - Idle Energy Mc0Ch1Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc0Ch1Dimm0; -/** Offset 0x0A59 - Idle Energy Mc0Ch1Dimm1 +/** Offset 0x0A51 - Idle Energy Mc0Ch1Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc0Ch1Dimm1; -/** Offset 0x0A5A - Idle Energy Mc1Ch0Dimm0 +/** Offset 0x0A52 - Idle Energy Mc1Ch0Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc1Ch0Dimm0; -/** Offset 0x0A5B - Idle Energy Mc1Ch0Dimm1 +/** Offset 0x0A53 - Idle Energy Mc1Ch0Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc1Ch0Dimm1; -/** Offset 0x0A5C - Idle Energy Mc1Ch1Dimm0 +/** Offset 0x0A54 - Idle Energy Mc1Ch1Dimm0 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc1Ch1Dimm0; -/** Offset 0x0A5D - Idle Energy Mc1Ch1Dimm1 +/** Offset 0x0A55 - Idle Energy Mc1Ch1Dimm1 Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) **/ UINT8 IdleEnergyMc1Ch1Dimm1; -/** Offset 0x0A5E - PowerDown Energy Mc0Ch0Dimm0 +/** Offset 0x0A56 - PowerDown Energy Mc0Ch0Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc0Ch0Dimm0; -/** Offset 0x0A5F - PowerDown Energy Mc0Ch0Dimm1 +/** Offset 0x0A57 - PowerDown Energy Mc0Ch0Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc0Ch0Dimm1; -/** Offset 0x0A60 - PowerDown Energy Mc0Ch1Dimm0 +/** Offset 0x0A58 - PowerDown Energy Mc0Ch1Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc0Ch1Dimm0; -/** Offset 0x0A61 - PowerDown Energy Mc0Ch1Dimm1 +/** Offset 0x0A59 - PowerDown Energy Mc0Ch1Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc0Ch1Dimm1; -/** Offset 0x0A62 - PowerDown Energy Mc1Ch0Dimm0 +/** Offset 0x0A5A - PowerDown Energy Mc1Ch0Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc1Ch0Dimm0; -/** Offset 0x0A63 - PowerDown Energy Mc1Ch0Dimm1 +/** Offset 0x0A5B - PowerDown Energy Mc1Ch0Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc1Ch0Dimm1; -/** Offset 0x0A64 - PowerDown Energy Mc1Ch1Dimm0 +/** Offset 0x0A5C - PowerDown Energy Mc1Ch1Dimm0 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc1Ch1Dimm0; -/** Offset 0x0A65 - PowerDown Energy Mc1Ch1Dimm1 +/** Offset 0x0A5D - PowerDown Energy Mc1Ch1Dimm1 PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) **/ UINT8 PdEnergyMc1Ch1Dimm1; -/** Offset 0x0A66 - Activate Energy Mc0Ch0Dimm0 +/** Offset 0x0A5E - Activate Energy Mc0Ch0Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc0Ch0Dimm0; -/** Offset 0x0A67 - Activate Energy Mc0Ch0Dimm1 +/** Offset 0x0A5F - Activate Energy Mc0Ch0Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc0Ch0Dimm1; -/** Offset 0x0A68 - Activate Energy Mc0Ch1Dimm0 +/** Offset 0x0A60 - Activate Energy Mc0Ch1Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc0Ch1Dimm0; -/** Offset 0x0A69 - Activate Energy Mc0Ch1Dimm1 +/** Offset 0x0A61 - Activate Energy Mc0Ch1Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc0Ch1Dimm1; -/** Offset 0x0A6A - Activate Energy Mc1Ch0Dimm0 +/** Offset 0x0A62 - Activate Energy Mc1Ch0Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc1Ch0Dimm0; -/** Offset 0x0A6B - Activate Energy Mc1Ch0Dimm1 +/** Offset 0x0A63 - Activate Energy Mc1Ch0Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc1Ch0Dimm1; -/** Offset 0x0A6C - Activate Energy Mc1Ch1Dimm0 +/** Offset 0x0A64 - Activate Energy Mc1Ch1Dimm0 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc1Ch1Dimm0; -/** Offset 0x0A6D - Activate Energy Mc1Ch1Dimm1 +/** Offset 0x0A65 - Activate Energy Mc1Ch1Dimm1 Activate Energy Contribution, range[255;0],(172= Def) **/ UINT8 ActEnergyMc1Ch1Dimm1; -/** Offset 0x0A6E - Read Energy Mc0Ch0Dimm0 +/** Offset 0x0A66 - Read Energy Mc0Ch0Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc0Ch0Dimm0; -/** Offset 0x0A6F - Read Energy Mc0Ch0Dimm1 +/** Offset 0x0A67 - Read Energy Mc0Ch0Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc0Ch0Dimm1; -/** Offset 0x0A70 - Read Energy Mc0Ch1Dimm0 +/** Offset 0x0A68 - Read Energy Mc0Ch1Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc0Ch1Dimm0; -/** Offset 0x0A71 - Read Energy Mc0Ch1Dimm1 +/** Offset 0x0A69 - Read Energy Mc0Ch1Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc0Ch1Dimm1; -/** Offset 0x0A72 - Read Energy Mc1Ch0Dimm0 +/** Offset 0x0A6A - Read Energy Mc1Ch0Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc1Ch0Dimm0; -/** Offset 0x0A73 - Read Energy Mc1Ch0Dimm1 +/** Offset 0x0A6B - Read Energy Mc1Ch0Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc1Ch0Dimm1; -/** Offset 0x0A74 - Read Energy Mc1Ch1Dimm0 +/** Offset 0x0A6C - Read Energy Mc1Ch1Dimm0 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc1Ch1Dimm0; -/** Offset 0x0A75 - Read Energy Mc1Ch1Dimm1 +/** Offset 0x0A6D - Read Energy Mc1Ch1Dimm1 Read Energy Contribution, range[255;0],(212= Def) **/ UINT8 RdEnergyMc1Ch1Dimm1; -/** Offset 0x0A76 - Write Energy Mc0Ch0Dimm0 +/** Offset 0x0A6E - Write Energy Mc0Ch0Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc0Ch0Dimm0; -/** Offset 0x0A77 - Write Energy Mc0Ch0Dimm1 +/** Offset 0x0A6F - Write Energy Mc0Ch0Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc0Ch0Dimm1; -/** Offset 0x0A78 - Write Energy Mc0Ch1Dimm0 +/** Offset 0x0A70 - Write Energy Mc0Ch1Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc0Ch1Dimm0; -/** Offset 0x0A79 - Write Energy Mc0Ch1Dimm1 +/** Offset 0x0A71 - Write Energy Mc0Ch1Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc0Ch1Dimm1; -/** Offset 0x0A7A - Write Energy Mc1Ch0Dimm0 +/** Offset 0x0A72 - Write Energy Mc1Ch0Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc1Ch0Dimm0; -/** Offset 0x0A7B - Write Energy Mc1Ch0Dimm1 +/** Offset 0x0A73 - Write Energy Mc1Ch0Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc1Ch0Dimm1; -/** Offset 0x0A7C - Write Energy Mc1Ch1Dimm0 +/** Offset 0x0A74 - Write Energy Mc1Ch1Dimm0 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc1Ch1Dimm0; -/** Offset 0x0A7D - Write Energy Mc1Ch1Dimm1 +/** Offset 0x0A75 - Write Energy Mc1Ch1Dimm1 Write Energy Contribution, range[255;0],(221= Def) **/ UINT8 WrEnergyMc1Ch1Dimm1; -/** Offset 0x0A7E - Throttler CKEMin Timer +/** Offset 0x0A76 - Throttler CKEMin Timer Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). Dfault is 0x00 **/ UINT8 ThrtCkeMinTmr; -/** Offset 0x0A7F - Reserved +/** Offset 0x0A77 - Reserved **/ - UINT8 Reserved56[2]; + UINT8 Reserved55[2]; -/** Offset 0x0A81 - Rapl Power Floor Ch0 +/** Offset 0x0A79 - Rapl Power Floor Ch0 Power budget ,range[255;0],(0= 5.3W Def) **/ UINT8 RaplPwrFlCh0; -/** Offset 0x0A82 - Rapl Power Floor Ch1 +/** Offset 0x0A7A - Rapl Power Floor Ch1 Power budget ,range[255;0],(0= 5.3W Def) **/ UINT8 RaplPwrFlCh1; -/** Offset 0x0A83 - Command Rate Support +/** Offset 0x0A7B - Command Rate Support CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS **/ UINT8 EnCmdRate; -/** Offset 0x0A84 - Reserved +/** Offset 0x0A7C - Reserved **/ - UINT8 Reserved57; + UINT8 Reserved56; -/** Offset 0x0A85 - Energy Performance Gain +/** Offset 0x0A7D - Energy Performance Gain Enable/disable Energy Performance Gain. <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 EpgEnable; -/** Offset 0x0A86 - Reserved +/** Offset 0x0A7E - Reserved **/ - UINT8 Reserved58; + UINT8 Reserved57; -/** Offset 0x0A87 - User Manual Threshold +/** Offset 0x0A7F - User Manual Threshold Disabled: Predefined threshold will be used.\n Enabled: User Input will be used. $EN_DIS **/ UINT8 UserThresholdEnable; -/** Offset 0x0A88 - User Manual Budget +/** Offset 0x0A80 - User Manual Budget Disabled: Configuration of memories will defined the Budget value.\n Enabled: User Input will be used. $EN_DIS **/ UINT8 UserBudgetEnable; -/** Offset 0x0A89 - Power Down Mode +/** Offset 0x0A81 - Power Down Mode This option controls command bus tristating during idle periods 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto **/ UINT8 PowerDownMode; -/** Offset 0x0A8A - Pwr Down Idle Timer +/** Offset 0x0A82 - Pwr Down Idle Timer The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means AUTO: 64 for ULX/ULT, 128 for DT/Halo **/ UINT8 PwdwnIdleCounter; -/** Offset 0x0A8B - Page Close Idle Timeout +/** Offset 0x0A83 - Page Close Idle Timeout This option controls Page Close Idle Timeout 0:Enabled, 1:Disabled **/ UINT8 DisPgCloseIdleTimeout; -/** Offset 0x0A8C - Bitmask of ranks that have CA bus terminated +/** Offset 0x0A84 - Bitmask of ranks that have CA bus terminated Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, Rank0 is terminating and Rank1 is non-terminating</b> **/ UINT8 CmdRanksTerminated; -/** Offset 0x0A8D - PcdSerialDebugLevel +/** Offset 0x0A85 - PcdSerialDebugLevel Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, Info & Verbose. @@ -2661,72 +2657,72 @@ typedef struct { **/ UINT8 PcdSerialDebugLevel; -/** Offset 0x0A8E - Reserved +/** Offset 0x0A86 - Reserved **/ - UINT8 Reserved59[7]; + UINT8 Reserved58[7]; -/** Offset 0x0A95 - Ask MRC to clear memory content +/** Offset 0x0A8D - Ask MRC to clear memory content Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. $EN_DIS **/ UINT8 CleanMemory; -/** Offset 0x0A96 - TCSS USB Port Enable +/** Offset 0x0A8E - TCSS USB Port Enable Bitmap for per port enabling **/ UINT8 UsbTcPortEnPreMem; -/** Offset 0x0A97 - Reserved +/** Offset 0x0A8F - Reserved **/ - UINT8 Reserved60; + UINT8 Reserved59; -/** Offset 0x0A98 - Post Code Output Port +/** Offset 0x0A90 - Post Code Output Port This option configures Post Code Output Port **/ UINT16 PostCodeOutputPort; -/** Offset 0x0A9A - RMTLoopCount +/** Offset 0x0A92 - RMTLoopCount Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO **/ UINT8 RMTLoopCount; -/** Offset 0x0A9B - Enable/Disable SA CRID +/** Offset 0x0A93 - Enable/Disable SA CRID Enable: SA CRID, Disable (Default): SA CRID $EN_DIS **/ UINT8 CridEnable; -/** Offset 0x0A9C - BCLK RFI Frequency +/** Offset 0x0A94 - BCLK RFI Frequency Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No RFI Tuning</b>. Range is 98Mhz-100Mhz. **/ UINT32 BclkRfiFreq[4]; -/** Offset 0x0AAC - Size of PCIe IMR. +/** Offset 0x0AA4 - Size of PCIe IMR. Size of PCIe IMR in megabytes **/ UINT16 PcieImrSize; -/** Offset 0x0AAE - Enable PCIe IMR +/** Offset 0x0AA6 - Enable PCIe IMR 0: Disable(AUTO), 1: Enable $EN_DIS **/ UINT8 PcieImrEnabled; -/** Offset 0x0AAF - Enable PCIe IMR +/** Offset 0x0AA7 - Enable PCIe IMR 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select the Root port location from PCH PCIe or SA PCIe $EN_DIS **/ UINT8 PcieImrRpLocation; -/** Offset 0x0AB0 - Root port number for IMR. +/** Offset 0x0AA8 - Root port number for IMR. Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 **/ UINT8 PcieImrRpSelection; -/** Offset 0x0AB1 - SerialDebugMrcLevel +/** Offset 0x0AA9 - SerialDebugMrcLevel MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, Info & Verbose. @@ -2735,208 +2731,208 @@ typedef struct { **/ UINT8 SerialDebugMrcLevel; -/** Offset 0x0AB2 - Reserved +/** Offset 0x0AAA - Reserved **/ - UINT8 Reserved61[13]; + UINT8 Reserved60[13]; -/** Offset 0x0ABF - Command Pins Mapping +/** Offset 0x0AB7 - Command Pins Mapping BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. **/ UINT8 Lp5CccConfig; -/** Offset 0x0AC0 - Command Pins Mirrored +/** Offset 0x0AB8 - Command Pins Mirrored BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. **/ UINT8 CmdMirror; -/** Offset 0x0AC1 - Reserved +/** Offset 0x0AB9 - Reserved **/ - UINT8 Reserved62[4]; + UINT8 Reserved61[4]; -/** Offset 0x0AC5 - Skip external display device scanning +/** Offset 0x0ABD - Skip external display device scanning Enable: Do not scan for external display device, Disable (Default): Scan external display devices $EN_DIS **/ UINT8 SkipExtGfxScan; -/** Offset 0x0AC6 - Generate BIOS Data ACPI Table +/** Offset 0x0ABE - Generate BIOS Data ACPI Table Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it $EN_DIS **/ UINT8 BdatEnable; -/** Offset 0x0AC7 - Lock PCU Thermal Management registers +/** Offset 0x0ABF - Lock PCU Thermal Management registers Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 $EN_DIS **/ UINT8 LockPTMregs; -/** Offset 0x0AC8 - Panel Power Enable +/** Offset 0x0AC0 - Panel Power Enable Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel). 0=Disable, 1(Default)=Enable $EN_DIS **/ UINT8 PanelPowerEnable; -/** Offset 0x0AC9 - BdatTestType +/** Offset 0x0AC1 - BdatTestType Indicates the type of Memory Training data to populate into the BDAT ACPI table. 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D **/ UINT8 BdatTestType; -/** Offset 0x0ACA - Reserved +/** Offset 0x0AC2 - Reserved **/ - UINT8 Reserved63[2]; + UINT8 Reserved62[2]; -/** Offset 0x0ACC - PMR Size +/** Offset 0x0AC4 - PMR Size Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot **/ UINT32 DmaBufferSize; -/** Offset 0x0AD0 - The policy for VTd driver behavior +/** Offset 0x0AC8 - The policy for VTd driver behavior BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS **/ UINT8 PreBootDmaMask; -/** Offset 0x0AD1 - Reserved +/** Offset 0x0AC9 - Reserved **/ - UINT8 Reserved64[95]; + UINT8 Reserved63[95]; -/** Offset 0x0B30 - TotalFlashSize +/** Offset 0x0B28 - TotalFlashSize Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable **/ UINT16 TotalFlashSize; -/** Offset 0x0B32 - BiosSize +/** Offset 0x0B2A - BiosSize The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected Range) so that a BIOS Update Script can be stored in the DPR. **/ UINT16 BiosSize; -/** Offset 0x0B34 - Reserved +/** Offset 0x0B2C - Reserved **/ - UINT8 Reserved65[12]; + UINT8 Reserved64[12]; -/** Offset 0x0B40 - Smbus dynamic power gating +/** Offset 0x0B38 - Smbus dynamic power gating Disable or Enable Smbus dynamic power gating. $EN_DIS **/ UINT8 SmbusDynamicPowerGating; -/** Offset 0x0B41 - Disable and Lock Watch Dog Register +/** Offset 0x0B39 - Disable and Lock Watch Dog Register Set 1 to clear WDT status, then disable and lock WDT registers. $EN_DIS **/ UINT8 WdtDisableAndLock; -/** Offset 0x0B42 - SMBUS SPD Write Disable +/** Offset 0x0B3A - SMBUS SPD Write Disable Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write Disable bit. For security recommendations, SPD write disable bit must be set. $EN_DIS **/ UINT8 SmbusSpdWriteDisable; -/** Offset 0x0B43 - HECI Timeouts +/** Offset 0x0B3B - HECI Timeouts 0: Disable, 1: Enable (Default) timeout check for HECI $EN_DIS **/ UINT8 HeciTimeouts; -/** Offset 0x0B44 - Force ME DID Init Status +/** Offset 0x0B3C - Force ME DID Init Status Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set ME DID init stat value $EN_DIS **/ UINT8 DidInitStat; -/** Offset 0x0B45 - CPU Replaced Polling Disable +/** Offset 0x0B3D - CPU Replaced Polling Disable Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop $EN_DIS **/ UINT8 DisableCpuReplacedPolling; -/** Offset 0x0B46 - Check HECI message before send +/** Offset 0x0B3E - Check HECI message before send Test, 0: disable, 1: enable, Enable/Disable message check. $EN_DIS **/ UINT8 DisableMessageCheck; -/** Offset 0x0B47 - Skip MBP HOB +/** Offset 0x0B3F - Skip MBP HOB Test, 0: disable, 1: enable, Enable/Disable MOB HOB. $EN_DIS **/ UINT8 SkipMbpHob; -/** Offset 0x0B48 - HECI2 Interface Communication +/** Offset 0x0B40 - HECI2 Interface Communication Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. $EN_DIS **/ UINT8 HeciCommunication2; -/** Offset 0x0B49 - Enable KT device +/** Offset 0x0B41 - Enable KT device Test, 0: disable, 1: enable, Enable or Disable KT device. $EN_DIS **/ UINT8 KtDeviceEnable; -/** Offset 0x0B4A - Skip CPU replacement check +/** Offset 0x0B42 - Skip CPU replacement check Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check $EN_DIS **/ UINT8 SkipCpuReplacementCheck; -/** Offset 0x0B4B - Avx2 Voltage Guardband Scaling Factor +/** Offset 0x0B43 - Avx2 Voltage Guardband Scaling Factor AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor. **/ UINT8 Avx2VoltageScaleFactor; -/** Offset 0x0B4C - Avx512 Voltage Guardband Scaling Factor +/** Offset 0x0B44 - Avx512 Voltage Guardband Scaling Factor AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor. **/ UINT8 Avx512VoltageScaleFactor; -/** Offset 0x0B4D - Serial Io Uart Debug Mode +/** Offset 0x0B45 - Serial Io Uart Debug Mode Select SerialIo Uart Controller mode 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, 4:SerialIoUartSkipInit **/ UINT8 SerialIoUartDebugMode; -/** Offset 0x0B4E - Reserved +/** Offset 0x0B46 - Reserved **/ - UINT8 Reserved66[2]; + UINT8 Reserved65[2]; -/** Offset 0x0B50 - SerialIoUartDebugRxPinMux - FSPM +/** Offset 0x0B48 - SerialIoUartDebugRxPinMux - FSPM Select RX pin muxing for SerialIo UART used for debug **/ UINT32 SerialIoUartDebugRxPinMux; -/** Offset 0x0B54 - SerialIoUartDebugTxPinMux - FSPM +/** Offset 0x0B4C - SerialIoUartDebugTxPinMux - FSPM Select TX pin muxing for SerialIo UART used for debug **/ UINT32 SerialIoUartDebugTxPinMux; -/** Offset 0x0B58 - SerialIoUartDebugRtsPinMux - FSPM +/** Offset 0x0B50 - SerialIoUartDebugRtsPinMux - FSPM Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* for possible values. **/ UINT32 SerialIoUartDebugRtsPinMux; -/** Offset 0x0B5C - SerialIoUartDebugCtsPinMux - FSPM +/** Offset 0x0B54 - SerialIoUartDebugCtsPinMux - FSPM Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* for possible values. **/ UINT32 SerialIoUartDebugCtsPinMux; -/** Offset 0x0B60 - Reserved +/** Offset 0x0B58 - Reserved **/ - UINT8 Reserved67[24]; + UINT8 Reserved66[24]; } FSP_M_CONFIG; /** Fsp M UPD Configuration @@ -2955,11 +2951,11 @@ typedef struct { **/ FSP_M_CONFIG FspmConfig; -/** Offset 0x0B78 +/** Offset 0x0B70 **/ - UINT8 UnusedUpdSpace38[6]; + UINT8 UnusedUpdSpace36[6]; -/** Offset 0x0B7E +/** Offset 0x0B76 **/ UINT16 UpdTerminator; } FSPM_UPD; |