summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* soc/intel/alderlake: Add ADL-P 6+8+2 (28W) VR configCurtis Chen2021-12-061-0/+5
| | | | | | | | | | | | | | We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the power map, fill in correct ADL-P 6+8+2 (28W) VR configuration. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/mediatek/mt8195: complete devapc settingsNina Wu2021-12-063-143/+275
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In previous patch (CB:56764), only basic settings were added. Now complete devapc settings on MT8195. 1. Update permission setting 2. Updtate master domain setting: - domain 1: PCIE0, PCIE1 - domain 2: SPM, SSPM, CPU_EB 3. Set domain remap - MMSYS (4-bit to 2-bit) - TINYSYS (4-bit to 3-bit) - TINYSYS (3-bit to 4-bit) - TINYSYS to EMI (3-bit to 4-bit) - INFRA2 (3-bit to 4-bit) 4. Set SCP domain and ADSP domain - domain 3: SCP - domain 4: ADSP BUG=b:204347737 TEST=sanity test pass Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/alderlake: Add support for ADL-N CPU TypeUsha P2021-12-062-0/+12
| | | | | | | | | | | Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
* northbridge/amd/pi/00730F01: enable PARALLEL_MPMichał Kopeć2021-12-063-124/+24
| | | | | | | | | | | | | | | | | | | Disable LEGACY_SMP_INIT to enable PARALLEL_MP. Also remove a large amount of APIC code that is now unnecessary. TEST=Boot on PC Engines apu3 Boot time reduced from 1.707 seconds to 1.620 seconds average across 5 coldboots. Inspired by CB:59693 Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* x86_64 assembly: Don't touch %gsPatrick Rudolph2021-12-063-5/+16
| | | | | | | | | | | | With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct, so don't clobber it. Backup and restore %gs where possible. Fixes a crash in MPinit seen after calling FSP-S. Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* security/intel: Use defines for segment registersPatrick Rudolph2021-12-061-2/+3
| | | | | | | | | | Change-Id: I6f11039bafa3800d59d61defa8824ae962224c9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59763 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* cbfs: Remove deprecated APIsJulius Werner2021-12-069-483/+5
| | | | | | | | | | | | | | This patch removes all remaining pieces of the old CBFS API, now that the last straggling use cases of it have been ported to the new one (meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
* tests: Fix objcopy --add-symbol arguments creationJakub Czapiga2021-12-062-5/+6
| | | | | | | | | | | | | | | Remove unnecessary escape bachslashes from: addr="$(echo \"$$$$sym_line\" ... The 'echo' will print output line with double quote characters, which then will be included in the values passed to --add-symbol. This can cause errors. Change-Id: I6023515191d6c236bf57870159a35d518f25e9d8 Reported-by: Yu-Ping Wu <yupingso@chromium.org> Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* mb/google/brya/var/redrix: Swap TPM I2C with touchscreen I2CWisley Chen2021-12-063-40/+37
| | | | | | | | | | | | | | | According to the latest schematic, exchange I2C port for TPM/touchscreen. TPM: I2C3 -> I2C1 Touchscreen: I2C1 -> I2C3 BUG=b:205648040 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I3a8339c23522019da884944246427512170510b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/common: Refactor cpu_set_p_state_to_max_non_turbo_ratioSridhar Siricilla2021-12-061-3/+2
| | | | | | | | | | | | | The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The function is updated to use cpu_get_max_non_turbo_ratio(). TEST=Build the code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If73df17faaf7b870ae311460a868d52352683c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/common: Add CPU related APIsSridahr Siricilla2021-12-062-0/+68
| | | | | | | | | | | | | | | | | The patch defines below APIs : cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not. cpu_get_bus_frequency() : Get CPU's bus frequency in MHz cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio cpu_get_cpu_type() : Get CPU type. The function must be called if executing CPU is hybrid. TEST=Verified the APIs on the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I680f43952ab4abce6e342206688ad32814970a91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/var/gimble: Set PsysPmax to 143 WChia-Ling Hou2021-12-061-0/+1
| | | | | | | | | | | | | | | | This patch adds the setting of PsysPmax to 143 W according to gimble board design. BUG=b:206990759 TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is passed to FSP by enabling FSP log & Boot into the OS Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0 Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ryan Lin <ryan.lin@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel: Move enum pcie_rp_type to intelblocks/pcie_rp.hTim Wawrzynczak2021-12-062-10/+11
| | | | | | | | | | | | | | This enum is useful to have around for more than just the one file, so move it to a common header file, and while we're there, also add an option for UNKNOWN. TEST=boot test on brya0 Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
* acpi: Add #define for Mutex "no timeout" valueTim Wawrzynczak2021-12-061-0/+2
| | | | | | | | | | | | | | Some acpigen code may use mutexes, and it is a common idiom to pass a value for the Timeout field of 0xffff, which is interpreted by OSPM to mean "no timeout". Therefore add a macro for this value. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
* mb/google/brya/var/felwinter: Correct garage wake eventEric Lai2021-12-062-2/+2
| | | | | | | | | | | | | | | Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both backwards, and was causing the system to fail to enter sleep states because the event was always asserted. BUG=b:208937710 TEST=only release switch can wake system. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* cpu/x86/mp_init.c: Fix HAVE_SMI_HANDLERArthur Heymans2021-12-061-19/+19
| | | | | | | | | | | | | | | | | | | Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no smihandler") broke SMM init because is_smm_enable() was called before smm_enable. Rework the code a little to make it clear what codepaths are used with CONFIG_HAVE_SMI_HANDLER. TESTED: now prodrive/hermes boots again. Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Documentation: Add template for deprecation noticesPatrick Georgi2021-12-062-0/+88
| | | | | | | | Change-Id: Ia2cc4f799804c7d56db572823246c487cd19a726 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59677 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Documentation: Update SSH key procedurePatrick Georgi2021-12-061-21/+8
| | | | | | | | | | | | | | Use ed25519 keys because recent changes to RSA keys in OpenSSH are making a mess. Also update references to the Gerrit UI to match the current version. Change-Id: Ib13836feb6968307d2c8b3022cb0c859dac89bb8 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
* mb/google/hatch: Remove stryke mainboardTim Wawrzynczak2021-12-058-360/+0
| | | | | | | | | | | | The stryke project/mainboard never ended up being built and was cancelled early on, therefore remove it from the tree. Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
* soc/intel/adl: Add override skip_cse_sub_part_update() for alderlakeKrishna Prasad Bhat2021-12-031-0/+6
| | | | | | | | | | | | | Check the Alderlake CPU ID to determine if cse sub-paritition update is required or not. BUG=b:202143532 Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/common: Add support for CSE IOM/NPHY sub-parition updateKrishna Prasad Bhat2021-12-035-4/+454
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the following support to coreboot 1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B partition of BIOS 2. Helper functions to support update. Pre-requisites to enable IOM/NPHY FW Update: 1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and FW_MAIN_B through board configuration files. CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path 2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition NPHY/IOM update. coreboot follows below procedure to update NPHY and IOM: NPHY Update: 1. coreboot will navigate through the CSE region, identify the CSE’s NPHY FW version and BIOS NPHY version. 2. Compare both versions, if there is a difference, CSE will trigger an NPHY FW update. Otherwise, skips the NPHY FW update. IOM Update: 1. coreboot will navigate through the CSE region, identify CSE's IOM FW version and BIOS IOM version. 2. Compares both versions, if there is a difference, coreboot will trigger an IOM FW update.Otherwise, skip IOM FW update. Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only if CSE boots from CSE RO Boot partition. Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then triggers update of NPHY and IOM FW in the CSE Region(RO and RW). coreboot triggers NPHY/IOM update procedure in all ChromeOS boot modes(Normal and Recovery). BUG=b:202143532 BRANCH=None TEST=Build and verify CSE sub-partitions IOM and NPHY are getting updated with CBFS IOM and NPHY blobs. Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after the update. Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/common: Add check before sending HMRFPO_ENABLE commandSridhar Siricilla2021-12-031-0/+6
| | | | | | | | | | | | | | | | This patch adds a check to determine if the CSE's current operation mode is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG, coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW partition. TEST=Verify sending HMRFPO_ENABLE command on Brya system. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/common: Rename compare_cse_version() function nameSridhar Siricilla2021-12-031-3/+4
| | | | | | | | | | | | | | | | The patch renames the compare_cse_version() function to the cse_compare_sub_part_version(). It makes the function generic so that it can be used to compare version of any CSE sub-partition like IOM, NPHY etc. TEST=Verified build for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/alderlake: Add support for ADL-N PCHUsha P2021-12-032-0/+11
| | | | | | | | | | | | | | | | | | | | Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to specify the correct amount of PCIe I/O. Document number 645550 indicates that Alder Lake-N has 12 PCH root ports and no CPU root ports. Document number 645548 indicates ADL-N has 5 clock sources and 5 clock request signals. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* cbfs | tspi: Join hash calculation for verification and measurementJulius Werner2021-12-035-97/+59
| | | | | | | | | | | | | | | | | | | This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT is enabled from the lookup step into the code where a file is actually loaded or mapped from flash. This has the advantage that CBFS routines which just look up a file to inspect its metadata (e.g. cbfs_get_size()) do not cause the file to be measured twice. It also removes the existing inefficiency that files are loaded twice when measurement is enabled (once to measure and then again when they are used). When CBFS verification is enabled and uses the same hash algorithm as the TPM, we are even able to only hash the file a single time and use the result for both purposes. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* mb/google/brya/var/felwinter: Add WiFi SAR table for felwinterIan Feng2021-12-032-0/+7
| | | | | | | | | | | | | | | | Add WiFi SAR table for felwinter. BUG=b:206901900 TEST=emerge-brya chromeos-config chromeos-config-bsp-private coreboot-private-files-baseboard-brya coreboot chromeos-bootimage and checked SAR table can load by WiFi driver. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
* mb/google/brya: Update camera NVM parametersBernardo Perez Priego2021-12-031-3/+4
| | | | | | | | | | | | | | | | | | | | | | Change HID name from INT3499 to PRP0001 along with size and address width. Size decreased from 10K to 2K, address width decreased from 14 to 8. BUG=b:203014972 Test= Boot board and issue commands: `cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom > ./brya_imx208_eeprom.bin` `hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log` You should see the result in brya_imx208_eeprom_dump.log to be same as module nvm file by vendor provided or meet the Intel nvm calibration format. (e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00) Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* libpayload: Add CBMEM_IMD_ENTRY support to coreboot tables parserJakub Czapiga2021-12-034-88/+71
| | | | | | | | | | | | | | | | | | coreboot stores much information in the CBMEM IMD. Until now it was ignored. This patch makes use of these coreboot tables entries. It also removes get_cbmem_addr() function as it is no longer needed. Moreover, the coreboot tables entry CB_TAG_MRC_CACHE does not exist anymore, as it is not created by the code. It was replaced by CBMEM_ID_MRCDATA entry, so MRCDATA should now be accessible through sysinfo structure field. Change-Id: I5bd02a98ba2631f34014bc0f8e7ebd5a5ddd2321 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
* mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsRobert Chen2021-12-033-1/+3
| | | | | | | | | | | | | | | Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Samsung K4U6E3S4AA-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* region: Rename rdev_readat_full to rdev_read_fullJulius Werner2021-12-032-2/+2
| | | | | | | | | | | The 'at' part of the name refers to starting to read from a specific offset, so it doesn't make sense for the 'full' version of the function. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* cpu/x86/mp_init.c: Fix building with no smihandlerArthur Heymans2021-12-031-0/+3
| | | | | | | | | | | | The build fails because smm_stub_size() tries to find a symbol that won't be present. Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
* mb/prodrive/hermes: Add VBT for Avalanche systemsAngel Pons2021-12-034-0/+14
| | | | | | | | | | | | | | | The Hermes mainboard is used in different system configurations. The current VBT for Poseidon systems is unsuitable for Avalanche systems because display ports are connected differently. Add a new field in the BMC config EEPROM layout and use it to choose the correct VBT for every system configuration. Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/prodrive/hermes: Correct memory RCOMP settingsAngel Pons2021-12-031-4/+4
| | | | | | | | | | | | | | The original RCOMP resistor and target values only apply to ULT CPUs and do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings and the associated comments. Tested, still boots. Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/prodrive/hermes: Configure ALC888 port B VrefAngel Pons2021-12-032-2/+29
| | | | | | | | | | | | | | Define a new field in the board config EEPROM layout for port B Vref. Write port B Vref settings to unused non-volatile NID 0x12 instead of NID 0x18, the actual port B NID. Because per-port Vref settings don't persist after codec resets, a custom Realtek driver (ab)uses NID 0x12 to restore port B Vref after resetting the codec. Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/prodrive/hermes: Update r04 front audio configAngel Pons2021-12-031-11/+10
| | | | | | | | | | Update the pin configs for the front panel jacks. Change-Id: I3760f0a25e964cf0eba99d180fd6f3e8488af868 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/prodrive/hermes: Clean up some cosmeticsAngel Pons2021-12-038-26/+25
| | | | | | | | | | | | | | | | Use lowercase for hex numbers, sort includes alphabetically and avoid relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up the indentation of some includes. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/prodrive/hermes: Get rid of variant structureAngel Pons2021-12-0320-225/+185
| | | | | | | | | | | | | | There's no need to use a variant structure here. Only one variant is used, and revision-specific differences are handled at run-time, and it's unlikely that another variant will ever exist. Reorganize the mainboard code to get rid of the variant structure. Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/prodrive/hermes: Add board URLAngel Pons2021-12-031-1/+1
| | | | | | | | | Change-Id: I943d0e2a91778df306f323e2b889cd4e928e0c2b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/google/guybrush: Configure EN_SPKR GPIO in PSP verstageKarthikeyan Ramasubramanian2021-12-032-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID straps and Developer Mode Beep signals. During boot up it is LOW and selects RAM_ID straps. When the system enters OS, it is driven HIGH and selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5 domain it does not reset until the system enters mechanical off (G3) state. On scenarios where the power button is pressed when the system is in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still selecting DEV BEEP signal. This causes boot up failures. Fix this by configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage. BUG=b:204450368 TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle followed by a S5 -> S0 boot cycle for 2 iterations successfully. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/brya/var/brask: Enable LAN driver to program MACAlan Huang2021-12-032-0/+6
| | | | | | | | | | | | | | | | Turn on the LAN device in devicetree and add Kconfig item RT8168_GET_MAC_FROM_VPD to support programming MAC address. BUG=b:193750191 BRANCH=None TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD. Use 'ifconfig' to check if the MAC written successfully. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* drivers/net/r8168: Add support for Realtek RT8125Alan Huang2021-12-032-2/+11
| | | | | | | | | | | | | | | | The Realtek RT8168 and RT8125 have a similar programming interface, therefore add the PCI device ID for the RT8125 into driver for support. BUG=b:193750191 TEST=emerge-brask coreboot chromeos-bootimage. Test on brask whose NIC is RT8125. Check if the default MAC is written into the NIC. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: Iaa4c41f94fd6e5fd6393abbb30bfc22a149f5d71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/alderlake: Add the CnviDdrRfim configurationRonak Kanabar2021-12-032-0/+8
| | | | | | | | | | | | | | | | FSP v2422_01 introduced new FSPM UPD CnviDdrRfim. Add CnviDdrRfim config to control the CnviDdrRfim UPD from devicetree. Setting CnviDdrRfim to 1 enable CNVi DDR RFIM BUG=b:201724512 BRANCH=None TEST=Build and boot brya with debug FSP and verify CnviDdrRfim UPD value. Change-Id: Ia06c9ed77d78821fd4724046bae2f31c9d771518 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/brask: Set vGPIO reset typeKane Chen2021-12-032-100/+100
| | | | | | | | | | | | | | | | Due to the vGPIO is not reset when we power on through S5, we would met MCA when PCIE send L1 request without following Ack BUG=b:207625007 TEST=S0->S3->S5->power key->S3->S0, see if boot up normal Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79 Signed-off-by: Curtis Chen <curtis.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/alderlake: Add TDP to give correct VR configurationCurtis Chen2021-12-032-37/+38
| | | | | | | | | | | | | | | | | The VR configuration should be based on the different Soc SKU type. And we also have different SKU in the same SA PCI ID. Therefore, add TDP to recognize the correct SKU and give the correct power setting. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/dedede: Create beadrix variantTeddy Shih2021-12-038-0/+82
| | | | | | | | | | | | | | | | | | | Create the beadrix variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:204882915 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BEADRIX Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian2021-12-031-0/+1
| | | | | | | | | | | | | | | | | Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* src/security/vboot: Set up secure counter space in TPM NVRAMKarthikeyan Ramasubramanian2021-12-033-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | High Definition (HD) protected content playback requires secure counters that are updated at regular interval while the protected content is playing. To support similar use-cases, define space for secure counters in TPM NVRAM and initialize them. These counters are defined once during the factory initialization stage. Also add VBOOT_DEFINE_WIDEVINE_COUNTERS config item to enable these secure counters only on the mainboard where they are required/used. BUG=b:205261728 TEST=Build and boot to OS in guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM space. tlcl_define_space: response is 0 tlcl_define_space: response is 0 tlcl_define_space: response is 0 tlcl_define_space: response is 0 On reboot if forced to redefine the space, it is identified as already defined. tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists Change-Id: I915fbdada60e242d911b748ad5dc28028de9b657 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
* mb/google/brya/variants/primus: Swap TPM I2C with touchscreen I2CMalik_Hsu2021-12-033-16/+23
| | | | | | | | | | | | | In next build phase, primus will exchange i2c port for touchscreen and cr50. BUG=b:207834727 TEST=build pass Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/taeko: Set vGPIO reset typeKevin Chang2021-12-031-20/+20
| | | | | | | | | | | | | | Due to the vGPIO is not reset when we power on through S5, we would met MCA when PCIE send L1 request without following Ack BUG=b:207070967 TEST=S0->S3->S5->power key->S3->S0, see if boot up normal Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya: Create taniks variantJoey Peng2021-12-038-0/+45
| | | | | | | | | | | | | | | | | | Create the taniks variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:207402720 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TANIKS Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 04:47:17 +0000