summaryrefslogtreecommitdiffstats
path: root/src/mainboard/sunw
Commit message (Collapse)AuthorAgeFilesLines
* Align several kconfig options to match newconfig:Patrick Georgi2010-01-251-1/+1
| | | | | | | | | | | | | | | | | | | HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Move all IOAPIC selection to southbridges, and remove themPatrick Georgi2010-01-181-1/+0
| | | | | | | | | | | | | | from mainboards. Some adaptations were necessary after the IOAPIC cleanup, so this should fix the build. Fix intel/d945gclf build, which was missing some ACPI component. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Eliminate special case id.inc/id.lds in favor of a configuration variable ↵Patrick Georgi2009-11-272-2/+6
| | | | | | | | | | | | | | | ID_SECTION_OFFSET which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative) where necessary (if romstraps get in the way). For Kconfig, the special case is set per southbridge (as these define the necessity for this workaround), for newconfig it's added to each single board. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi2009-11-271-0/+11
| | | | | | | | | | | | | | | | Usually, this means adding values to Kconfig, but in a few cases, adding values to newconfig, too (which doesn't hurt). Also really hook up tyan/s2850 and tyan/s2875 to kconfig, and have them still build. Trivial and stupid kconfig changes, just lots of them. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson2009-11-062-6/+0
| | | | | | | | | | | | | | now handled more generically using CBFS. Simplify the option ROM code in device/pci_rom.c, since there are only two ways to get a ROM address now (CBFS and the device) and add an exception for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Split the two usages of __ROMCC__:Myles Watson2009-11-061-1/+1
| | | | | | | | | | | | | __ROMCC__ now means "Don't use prototypes, since romcc doesn't support them." __PRE_RAM__ means "Use simpler versions of functions, and no device tree." There are probably some places where both are tested, but only one is needed. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.incMyles Watson2009-10-261-74/+1
| | | | | | | | | | | | Make more boards use both of them. Trivial. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c2009-10-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | - Drop unused "#object reset.o" entries. - Use CONFIG_HAVE_HARD_RESET for all "object reset.o" entries. - Drop dead/commented code, i.e. useless hard_reset() from: - supermicro/x6dhe_g/auto.c - supermicro/x6dhe_g2/auto.c - supermicro/x6dhe_g2/auto.updated.c - supermicro/x6dhr_ig/auto.c - supermicro/x6dhr_ig2/auto.c - digitallogic/msm586seg/auto.c - dell/s1850/auto.c - Add "obj-$(CONFIG_HAVE_HARD_RESET) += reset.o" to kconfig files of boards that actually have a reset.c file. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4849 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson2009-10-231-2/+0
| | | | | | | | | | RAM is initialized, and no one does it. Trivial. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4830 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson2009-10-201-1/+0
| | | | | | | | | | | | | | | | | selected in sockets, and they aren't used yet. Add a couple of variables to src/Kconfig for lack of a better place so that their selects work. Add select statements according to newconfig for some variables that were defined but never selected in mainboard configs. Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann2009-10-201-1/+1
| | | | | | | | | Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann2009-10-161-0/+1
| | | | | | | | | | | | | with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson2009-10-154-8/+9
| | | | | | | | | | | | to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Convert all "default y" options to "select FOO" (shorter).Uwe Hermann2009-10-071-20/+2
| | | | | | | | | | | | Also, drop per-board CONSOLE_VGA/PCI_ROM_RUN while I'm at it, they're global options in kconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi2009-10-061-0/+4
| | | | | | | | | | | complete set of variables now, though they might still have the wrong values. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi2009-10-041-2/+0
| | | | | | | | | | | | | | Both were only really used in pre-cbfs, as the payload's size isn't relevant for the build process anymore. Various calculations in {no,}failovercalculation.lb are adapted accordingly. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE fromPatrick Georgi2009-10-031-10/+0
| | | | | | | | | | | boards to global. It's not a per-board value, but compatibility stuff. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Remove:Patrick Georgi2009-10-031-6/+0
| | | | | | | | | | | | | | | | | | | | - CONFIG_CBFS - anything that's conditional on CONFIG_CBFS == 0 - files that were only included for CONFIG_CBFS == 0 In particular: - elfboot - stream boot code - mini-filo and filesystems (depends on stream boot code) After this commit, there is no way to build an image that is not using CBFS anymore. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Remove duplicate and not too useful Kconfig board comments asUwe Hermann2009-10-031-2/+0
| | | | | | | | | | | per discussion on the mailing list. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Fix a number of board names in Kconfig (trivial).Uwe Hermann2009-09-291-2/+2
| | | | | | | | | | | Also, simplify the M2V-MX SE Kconfig file a bit while I'm at it. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4688 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Remove MAINBOARD_OPTIONS, which is a relic from earlyPatrick Georgi2009-09-291-5/+0
| | | | | | | | | | | kconfig development. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4687 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* some progress on kconfig:Patrick Georgi2009-09-253-1/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - northbridges are done - southbridges are done - Intel CPUs are done, with a design that the board only has to specify the socket it has, and the CPUs are pulled in automatically. There is some more cleanup possible in that area, but I'll do that later - a couple more mainboards compile: - intel/eagleheights - intel/jarrell - intel/mtarvon - intel/truxton - intel/xe7501devkit - sunw/ultra40 - supermicro/h8dme - tyan/s2850 - tyan/s2875 - via/epia - via/epia-cn - via/epia-m - via/epia-m700 - via/epia-n - via/pc2500e (PPC not considered, probably overlooked something) All of them only _build_, but some options are probably completely wrong. To be fixed later Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer2009-09-231-2/+2
| | | | | | | | | | | It's only three files. Also fix up all the paths (Gotta love included C files) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Kconfig!Patrick Georgi2009-08-122-0/+156
| | | | | | | | | | | | | | | Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi2009-08-111-4/+2
| | | | | | | | | | and we will fix issues as they appear. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* the tool chain settings should not be in renamed (as they will never live inStefan Reinauer2009-06-301-2/+2
| | | | | | | | | | Kconfig) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer2009-06-303-119/+119
| | | | | | | | | | | | | | | | It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger2009-06-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | files for targets without failover: src/config/nofailovercalculation.lb (64 kB XIP) src/config/nofailovercalculation128.lb (128 kB XIP) Targets with other XIP sizes were ignored. This patch moves XIP size back into mainboard code. Benefits from this patch: - src/config/nofailovercalculation128.lb is no longer needed - Targets with XIP sizes besides 64k and 128k benefit from refactoring - Conceptually, this makes the include files pure calculation files without settings. Abuild tested. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen2009-06-031-1/+1
| | | | | | | | | | | | | | This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660. Stepan pointed out that "s" means string, which makes the following statement in this commit message invalid: "Since we either have reserved space (which we shouldn't do anything with in these two functions), an enum or a hexadecimal value, unsigned int seemed like the way to go." Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Luc Verhaegen <libv@skynet.be> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* CMOS: Add set_option and rework get_option.Luc Verhaegen2009-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To ease some of my debugging pain on the unichrome, i decided i needed to move FB size selection into cmos, so i could test a size and then reset it to the default after loading this value so that the next reboot uses the (working) default again. This meant implementing set_option in parallel to get_option. get_option was then found to have inversed argument ordering (like outb) and passing char * and then depending on the cmos layout length, which made me feel quite uncomfortable. Since we either have reserved space (which we shouldn't do anything with in these two functions), an enum or a hexadecimal value, unsigned int seemed like the way to go. So all users of get_option now have their arguments inversed and switched from using ints to unsigned ints now. The way get_cmos_value was implemented forced us to not overlap byte and to have multibyte values be byte aligned. This logic is now adapted to do a full uint32_t read (when needed) at any offset and any length up to 32, and the shifting all happens inside an uint32_t as well. set_cmos_value was implemented similarly. Both routines have been extensively tested in a quick separate little program as it is not easy to get this stuff right. build_opt_tbl.c was altered to function correctly within these new parameters. The enum value retrieval has been changed strol(..., NULL, 10) to stroul(..., NULL, 0), so that we not only are able to use unsigned ints now but so that we also interprete hex values correctly. The 32bit limit gets imposed on all entries not marked reserved, an unused "user_data" field that appeared in a lot of cmos.layouts has been changed to reserved as well. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi2009-04-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | 3 (with one of them way too much assembler code). On the way, I had to make some changes to the way the code is built, which is an effort I want to expand over time. Right now, large portions of the in-ROM part of coreboot is compiled as a single file, with lots of .c files including other .c files. That has its justification for pre-raminit code, but it also affects lots of post-raminit code (memcpy doesn't really make sense before raminit, or at least CAR) The coreboot_apc code (AMD boards) gained some .c includes because I don't know that part of the code enough to really rework it and only have limited possibilities to test it. The includes should give an identical situation for this part of the code. This change was posted as set of 6 patches to the list, but they were mostly split for review purposes, hence commit them all at once. They can still be backed up using the patch files, if necessary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* drop duplicate compiler options that are already mentioned in CFLAGS.Stefan Reinauer2009-04-221-2/+2
| | | | | | | | | | | (scan-build chokes on this) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger2009-04-211-34/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | refactoring Config.lb became possible. Factor out ROM size calculation from Config.lb. This patch converts 87 boards (with and without USE_FAILOVER_IMAGE), but it has to work around a parser bug. 89 files changed, 209 insertions(+), 2415 deletions(-) A total of 2206 removed lines. Abuild works for all changed boards on khepri. Myles writes: I've tested serengeti for the failover portion and s2892 for the nofailover portion. ldoptions are exactly the same and they both boot the same. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* v2/src romfs->cbfs renamePeter Stuge2009-04-141-3/+3
| | | | | | | | | | | | This also has the config tool changes in v2/util. Rename romfs.[ch]->cbfs.[ch] and sed romfs->cbfs romtool->cbfstool ROMFS->CBFS Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4113 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This patch cleans up the calls to $CC in mainboard Config.lb files. TheyCarl-Daniel Hailfinger2009-04-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | now all have the same parameter order. action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@" The idea behind this parameter order is: - *FLAGS at the beginning. - Use a common set of *FLAGS. - Include files and directories listed afterwards. - nostdinc, nostdlib, no-builtin tell the compiler this is standalone code. - Warnings. They do not influence source or compilation. - Compilation strategy (small) and output mode (asm or binary). - File to be compiled. - Output name. - $(DEBUG_CFLAGS) and -S are only used for asm output. Other changes in this patch: - src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of hardcoding the respective flags. - $DEBUG_CFLAGS was added to asm outputting $CC calls: supermicro/h8dme/Config.lb lippert/roadrunner-lx/Config.lb - $DISTRO_CFLAGS was added to some $CC calls in: iwill/dk8_htx/Config.lb (CAR AP code) supermicro/h8dmr/Config.lb (CAR AP code) supermicro/h8dme/Config.lb (CAR AP code) gigabyte/m57sli/Config.lb (CAR AP code) gigabyte/ga_2761gxdk/Config.lb (CAR AP code) amd/serengeti_cheetah_fam10/Config.lb (everywhere) msi/ms7135/Config.lb (everywhere) nvidia/l1_2pvv/Config.lb (CAR AP code) -$CFLAGS was added to all $CC calls in: amd/db800/Config.lb amd/dbm690t/Config.lb amd/norwich/Config.lb amd/pistachio/Config.lb amd/serengeti_cheetah/Config.lb amd/serengeti_cheetah_fam10/Config.lb arima/hdama/Config.lb artecgroup/dbe61/Config.lb asus/a8n_e/Config.lb asus/a8v-e_se/Config.lb asus/m2v-mx_se/Config.lb broadcom/blast/Config.lb digitallogic/msm800sev/Config.lb gigabyte/ga_2761gxdk/Config.lb gigabyte/m57sli/Config.lb ibm/e325/Config.lb ibm/e326/Config.lb iei/pcisa-lx-800-r10/Config.lb iwill/dk8_htx/Config.lb iwill/dk8s2/Config.lb iwill/dk8x/Config.lb kontron/986lcd-m/Config.lb lippert/roadrunner-lx/Config.lb lippert/spacerunner-lx/Config.lb msi/ms7135/Config.lb msi/ms7260/Config.lb msi/ms9185/Config.lb msi/ms9282/Config.lb newisys/khepri/Config.lb nvidia/l1_2pvv/Config.lb pcengines/alix1c/Config.lb sunw/ultra40/Config.lb supermicro/h8dme/Config.lb supermicro/h8dmr/Config.lb technexion/tim8690/Config.lb tyan/s2735/Config.lb tyan/s2850/Config.lb tyan/s2875/Config.lb tyan/s2880/Config.lb tyan/s2881/Config.lb tyan/s2882/Config.lb tyan/s2885/Config.lb tyan/s2891/Config.lb tyan/s2892/Config.lb tyan/s2895/Config.lb tyan/s2912/Config.lb tyan/s2912_fam10/Config.lb tyan/s4880/Config.lb tyan/s4882/Config.lb - Use $@ wherever appropriate. - Kill that evil CACHE_AS_RAM_AUTO_C variable. - Trailing whitespace fixups on lines which were touched anyway. We now only have 6 remaining different calls to $CC whereas before there were 20. If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4 different calls. If we can decide on the use of $CPU_OPT, we are down to 3 different calls. One additional point I'd like to clear up: if ASSEMBLER_DEBUG makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm end "-dA -fverbose-asm" is only useful for asm output. For these flags, DEBUG_CFLAGS is a total misnomer. What about calling them DEBUG_ASMCFLAGS or somesuch? "-g" should be controllable by a separate switch. It is useful even for object code. The following targets are broken by this patch because they contain implicit declarations, but the error did not trigger due to missing CFLAGS: amd/serengeti_cheetah asus/a8v-e_se asus/m2v-mx_se digitallogic/msm800sev pcengines/alix1c supermicro/h8dme supermicro/h8dmr Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Fix up the incomplete commit in r4055.Carl-Daniel Hailfinger2009-04-032-0/+0
| | | | | | | | | Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4058 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* There are more than a dozen targets in the v2 tree which refer to ROMCCCarl-Daniel Hailfinger2009-04-033-374/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in their Config.lb but never use it. There's no point in keeping dead code around. This patch removes ROMCC remainders from Config.lb and kills orphaned auto.c and failover.c in the affected mainboard directories. arima/hdama ibm/e325 ibm/e326 iwill/dk8s2 iwill/dk8x msi/ms9282 newisys/khepri sunw/ultra40 tyan/s2891 tyan/s2892 tyan/s2895 tyan/s4880 tyan/s4882 Abuild log is completely identical with and without the patch. With this patch, the last ROMCC remainders for K8 boards are gone. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer2009-04-013-9/+1
| | | | | | | | | | | | be used unconditionally, and the names don't hurt. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Add the CONFIG_ROMS config variable. Ronald G. Minnich2009-03-311-0/+6
| | | | | | | | | | | Tested under abuild, causes no trouble. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Carl-Daniel's part:Carl-Daniel Hailfinger2009-02-182-3/+3
| | | | | | | | | | | | | | | This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and mainboard_$VENDOR_$BOARD_config to mainboard_config. Ron's part: The config change that makes the naming change not break every build. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This patch makes the recently added assembler debug optional, as it mayStefan Reinauer2009-01-201-1/+1
| | | | | | | | | | | | | cause problems with certain toolchains. This patch will also safe some hard disk space for those of us working on laptops or netbooks with always too small disks. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Fix implicit declarations of get_bus_conf.Carl-Daniel Hailfinger2008-12-222-0/+4
| | | | | | | | Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3835 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* In the process of trying to debug some HT sync problems I added lots ofCarl-Daniel Hailfinger2008-12-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | debug code to src/northbridge/amd/amdk8/incoherent_ht.c. However, printk is not available for all boards at that stage. I have changed the following boards: agami/aruma arima/hdama asus/a8n_e broadcom/blast ibm/e325 ibm/e326 iwill/dk8s2 iwill/dk8x msi/ms7135 newisys/khepri sunw/ultra40 tyan/s2850 tyan/s2875 tyan/s2880 tyan/s2881 tyan/s2882 tyan/s2885 tyan/s2891 tyan/s2892 tyan/s2895 tyan/s4880 tyan/s4882 abuild works fine for all of them. agami/aruma needs a Config-abuild.lb which doesn't have fallback and normal due to size problems. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This patch from Ralf Grosse Boerger makes debugging more comfortable. Stefan Reinauer2008-11-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch it's possible to - determine the according source code line for each asm statement (objdump -dS) - determine the source code file for each asm statement (objdump -ddl) This isn't exactly trivial because cache_as_ram_auto.c gets compiled to assembly and converted by a perl script afterwards. This patch solves the problem - by extending cache_as_ram_auto.inc with debug information and line numbers - by correcting the perl calls (".text" --> "\.text") - by creating a disassembly with source code and line numbers. (ctr0.disasm and coreboot.disasm) There's one minor downside to the patch: A complete abuild run takes up around 1.6G instead of about 700MB now. But I'm sure this is quite reasonable for the benefits. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Please commit while this is being worked out. Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots ofCarl-Daniel Hailfinger2008-10-013-3/+5
| | | | | | | | | | | | | code to use it. That makes the code more readable and also less error-prone. Abuild tested. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This changes the python generated makefilesCarl-Daniel Hailfinger2008-09-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | targets/*/*/Makefile targets/*/*/normal/Makefile targets/*/*/fallback/Makefile to use a common copy of romcc, and to leave this compiler untouched by 'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ . 'make clean' in targets/*/*/ will clean romcc. Thanks to Mats for the initial idea and implementation of a tool to do this. This patch has almost the same behaviour as the original tool without having to run the tool each time. Tested for abuild-friendliness. The patch saves ~10-12 seconds for every target using romcc. For a full abuild run, this is ~20% time saved. For the first 38 abuild targets, total build time is down to 13m24s instead of 16m22s on my machine. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This is the sata irq patch for s2895 and ultra40. It also changes some brokenMyles Watson2008-04-231-1/+2
| | | | | | | | | | | | white space in the s2892 and s2891 mptable.c files. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This patch fixes the remaining stack protector problem on v2. The ↵Ronald G. Minnich2008-01-261-2/+2
| | | | | | | | | | | | | | | | DISTRO_CFLAGS were not being included on the CC line for cache_as_ram_auto.c Tested on ubuntu, where formerly it failed. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer2008-01-182-14/+14
| | | | | | | | | | | | Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to everyMyles Watson2007-12-091-0/+1
| | | | | | | | | | | | | | | | Options.lb file that already had a "uses CONFIG_COMPRESSED_PAYLOAD_LZMA" line in it. I figure that only adding it to the files that already have support for LZMA payloads makes sure I don't break anything. Signed-off-by: Myles Watson <myles@pel.cs.byu.edu> Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 01:26:30 +0000