summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* mb/google/kukui: Add new config 'cozmo'Lucas Chen2021-03-172-0/+5
| | | | | | | | | | | | | | | New board 'cozmo'. BUG=b:181144502 TEST=None BRANCH=kukui Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Ia0ec1d89444d2634bfcfb3475a422f4e4ae92b7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* mb/google/dedede/var/sasukette: Enable ALC1015 AMP (Auto Mode) driverwuweimin2021-03-172-13/+7
| | | | | | | | | | | | | | Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:176956779 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Change-Id: Iaa5650e120362e81fa36530f6a207c9c07e1139a Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* ipmi/ocp: Remove duplicate IPMI OEM command set processor informationJingleHsuWiwynn2021-03-173-137/+0
| | | | | | | | | | | | | | | | IPMI OEM command set processor information has already been implemented in u-root payload: https://github.com/u-root/u-root/commit/efdc3a30ecca53e8b50b863969173969127fa384 Also this command has a higher chance to see BMC KCS timeout issue when coreboot log level is 4, which can be avoided if this command is run at a later stage such as LinuxBoot. Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com> Change-Id: If0081e5195cbd605e062723c197ac74343f79a13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51276 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/alderlake: Enable CSE Lite driver for ADL platform in romstageSridhar Siricilla2021-03-171-1/+10
| | | | | | | | | | | | | This patch sets up cse_fw_sync() call in the romstage. The cse_fw_sync() must be called after DRAM initialization. Test=Verified on Alderlake platform Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I6779f4a9e140deebf7f3cecd9fc5dac18813f246 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/dedede/var/lantis: Update DPTF parametersTony Huang2021-03-171-8/+23
| | | | | | | | | | | | | | | | | DPTF paramerters from thermal team. 1. PL2 =15W 2. Add TSR sensor charger, 5V regulator BUG=b:177249297 BRANCH=dedede TEST=build image and verified by thermal team. Change-Id: Ia5f6cc2a4564bb5558cbaca8daf31ee70145019f Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/intel/shadowmountain: Update HDMI audio mode to 8TSugnan Prabhu S2021-03-171-1/+1
| | | | | | | | | | | | | | | This patch sets the HDMI audio mode to 8T as required by the latest FSP version v2081_02 TEST: HDMI audio codecs detection is failing without this change. Change-Id: Ie5a825da7d199c9ee61e64d8f4ee7dec28fdaacd Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
* mb/intel/shadowmountain: Disable xDCISugnan Prabhu S2021-03-171-1/+1
| | | | | | | | | | | | | | | This patch disables the xDCI which is causing PC8 to PC10 state transitions during sleep. TEST: Confirmed that the transition is happening with this change. Change-Id: I9bbf7b52c36954600d7e66f9b03fad39b8881a5f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
* sar: Fix semantics of `get_wifi_sar_cbfs_filename()`Furquan Shaikh2021-03-1718-82/+49
| | | | | | | | | | | | | | | | | | | | Currently, if `get_wifi_sar_cbfs_filename()` returns NULL, then `get_wifi_sar_limits()` assumes that the default filename is used for CBFS SAR file. This prevents a board from supporting different models using the same firmware -- some which require SAR support and some which don't. This change updates the logic in `get_wifi_sar_limits()` to return early if filename is not provided by the mainboard. In order to maintain the same logic as before, current mainboards are updated to return WIFI_SAR_CBFS_DEFAULT_FILENAME instead of NULL in default case. Change-Id: I68b5bdd213767a3cd81fe41ace66540acd68e26a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51485 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* drivers/wifi, mb/google: Drop config `WIFI_SAR_CBFS`Furquan Shaikh2021-03-176-21/+10
| | | | | | | | | | | | | | | | | | | | | | | | Now that SAR support in VPD is deprecated in coreboot, there is no need for a separate Kconfig `WIFI_SAR_CBFS` as the SAR table is only supported as a CBFS file. This change drops the config `WIFI_SAR_CBFS` from drivers/wifi/generic/Kconfig and its selection in mb/google/.../Kconfig. wifi_sar_defaults.hex is added to CBFS only if CONFIG_WIFI_SAR_CBFS_FILEPATH is not empty because current mainboards do not provide a default SAR file in coreboot. Thus, CONFIG_WIFI_SAR_CBFS_FILEPATH is updated to have a default value of "". BUG=b:173465272 Cq-Depend: chromium:2757781 Change-Id: I0bb8f6e2511596e4503fe4d8c34439228ceaa3c7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* vc/google/chromeos: Deprecate support for SAR tables in VPDFurquan Shaikh2021-03-171-88/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SAR table in VPD has been deprecated for Chrome OS platforms for > 1 year now. All new Chrome OS platforms have switched to using SAR tables from CBFS. This change drops the support for SAR table in VPD from coreboot to align with the factory changes. `get_wifi_sar_limits()` is thus updated to look for SAR file in CBFS only. Anyone building ToT coreboot for an already released Chrome OS platform with SAR table in VPD will have to extract the "wifi_sar" key from VPD and add it as a file to CBFS using following steps: - On DUT, read SAR value using `vpd -i RO_VPD -g wifi_sar` - In coreboot repo, generate CBFS SAR file using: `echo ${SAR_STRING} > site-local/${BOARD}-sar.hex` - Add to site-local/Kconfig: ``` config WIFI_SAR_CBFS_FILEPATH string default "site-local/${BOARD}-sar.hex" ``` BUG=b:173465272 Change-Id: I21d190dcc9f3554fab6e21b4498e7588a32bb1f0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* vendorcode/mt8192: devapc: fix register offset for PCIe domainNina Wu2021-03-171-1/+1
| | | | | | | | | | Correct the wrong offset for setting PCIe domain. Change-Id: I9de2bdf5a0a4fb5b34985b11976fd50b397e97ba Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51512 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* prog_loaders: Remove prog_locate()Julius Werner2021-03-177-71/+20
| | | | | | | | | | | | | | | | | This patch rewrites the last few users of prog_locate() to access CBFS APIs directly and removes the call. This eliminates the double-meaning of prog_rdev() (referring to both the boot medium where the program is stored before loading, and the memory area where it is loaded after) and makes sure that programs are always located and loaded in a single operation. This makes CBFS verification easier to implement and secure because it avoids leaking a raw rdev of unverified data outside the CBFS core code. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I7a5525f66e1d5f3a632e8f6f0ed9e116e3cebfcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/49337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
* cbfs: Remove prog_locate() for payloads (SELF and FIT)Julius Werner2021-03-179-67/+46
| | | | | | | | | | | This patch removes the prog_locate() call for all instances of loading payload formats (SELF and FIT), as the previous patch did for stages. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I582b37f36fe6f9f26975490a823e85b130ba49a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* cbfs: Remove prog_locate() for stages and rmodulesJulius Werner2021-03-1614-69/+43
| | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the prog_locate() step for stages and rmodules. Instead, the stage and rmodule loading functions will now perform the locate step directly together with the actual loading. The long-term goal of this is to eliminate prog_locate() (and the rdev member in struct prog that it fills) completely in order to make CBFS verification code safer and its security guarantees easier to follow. prog_locate() is the main remaining use case where a raw rdev of CBFS file data "leaks" out of cbfs.c into other code, and that other code needs to manually make sure that the contents of the rdev get verified during loading. By eliminating this step and moving all code that directly deals with file data into cbfs.c, we can concentrate the code that needs to worry about file data hashing (and needs access to cbfs_private.h APIs) into one file, making it easier to keep track of and reason about. This patch is the first step of this move, later patches will do the same for SELFs and other program types. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* AGESA,binaryPI boards: Drop invalid MP table filesKyösti Mälkki2021-03-1653-3593/+0
| | | | | | | | | | | | | | If we spot any error in the file, treat it as untested and broken copy-paste. Change-Id: Idd13b8b006fce7383f3f73c3c0a5d51a71c0155b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38313 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* AGESA,binaryPI boards: Move IRQ table programmingKyösti Mälkki2021-03-1633-617/+642
| | | | | | | | | | | | IRQ programming should be done outside (obsolete) MP table generation. Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/dedede/var/storo: Add USB Port ConfigurationZanxi Chen2021-03-161-0/+6
| | | | | | | | | | | | | | Add USB Port into devicetree for storo BUG=b:177389444 BRANCH=dedede TEST=built firmware and verified USB3.0 function is OK Change-Id: I4d5160ff23d2bd386cb33164b580e6d6f3bf30fd Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* vendorcode/mt8192: change to short log macro namesXi Chen2021-03-1618-1281/+1283
| | | | | | | | | | | | | | Originally, log macro names are too long, and they use double parentheses style: ((...)), which causes compile or runtime error easily. Now, change them to single parenthesis mode (...), and use shorter name. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2959dc1ba0dd40a8fb954406072f31cf14c26667 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek/mt8192: adjust i2c "tLOW" and "tSU,STO"Daolong Zhu2021-03-161-3/+29
| | | | | | | | | | | | | | | | | The i2c actiming with the default reg setting cannot meet spec, so we need to set some regs. 1. adjust the ratio of SCL high and low level, to adjust "tLOW". 2. modify ext_conf reg to adjust "tSU,STO". BUG=b:179000159 TEST=Test on asurada (MT8192), boot pass, timing pass. Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Change-Id: Ifbe97edbc38972af5b782fb93342ee0616127dd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51024 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/dedede/var/blipper: Add camera supportZanxi Chen2021-03-163-0/+36
| | | | | | | | | | | | | | Add camera support in devicetree and associated GPIO configuration. BUG=b:181729304 BRANCH=dedede TEST=built blipper firmware and verified camera function is OK Change-Id: I806ec207a454d4383aca093159553b7e618e16b2 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/google/dedede/var/blipper: Add codec and speaker amplifier supportZanxi Chen2021-03-161-0/+26
| | | | | | | | | | | | | | Add audio codec and speaker amplifier support into devicetree BUG=b:181732574 BRANCH=dedede TEST=built blipper firmware and verified audio function is OK Change-Id: Id4633649b5e0595ed99a40ae35eb54b005154604 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/google/dedede/var/blipper: Enable touchscreen for blipperZanxi Chen2021-03-161-0/+38
| | | | | | | | | | | | | | Add G2 and ELAN touchscreen into devicetree for blipper. BUG=b:181098785 BRANCH=dedede TEST=built blipper firmware and verified touchscreen function is ok Change-Id: Ie0bfc2972fc1a33a6f02495d3976b816209e956b Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/google/dedede/var/sasuke: Configure GPP_B7 as GPO_HIGHSeunghwan Kim2021-03-161-1/+1
| | | | | | | | | | | | | | | | | Configuring GPP_B7 as GPO_HIGH. Sasuke doesn't have SAR sensor, GPP_B7 is routed to the LTE module and is kept high so that the LTE module uses the default emission power. BUG=b:180492044 BRANCH=firmware-dedede-13606.B TEST="FW_NAME=sasuke emerge-dedede coreboot" Change-Id: Ib38c649830db2291b3a2a771f5c884acf37dcbeb Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51049 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* vendorcode/mt8192: fix fast-k gating PI P1 initializationXi Chen2021-03-161-0/+1
| | | | | | | | | | In RX Gating flow, PI P1 delay is missing, so re-add the initialization. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: Ic72ccecd205062ee79f6928993fac772fc10f880 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* vendorcode/mt8192: limit fast-k frequency count from 7 to 3Xi Chen2021-03-161-1/+21
| | | | | | | | | | | For bootup faster, fast-k elapsed time is improved by ~400ms. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: Ifa945012aa66df4433fe63aab75a1e785d343d9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51406 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/asurada: fix boot failure when reading SKU IDHung-Te Lin2021-03-161-0/+2
| | | | | | | | | | | | | | | The SKU IDs also need mapping table when reading voltages. BUG=None BRANCH=asurada TEST=emerge-asurada coreboot Change-Id: Ice91961d6c33cfa27254221663edca1547c9ddcc Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* mb/google/guybrush: Add initial fch irq routingMathew King2021-03-161-0/+83
| | | | | | | | | | | | BUG=b:181972598 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I1abb070324254e21b03bfe00d6eee3b70120564c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* mb/google/guybrush: Enable eSPI VW SCI eventsMathew King2021-03-151-0/+13
| | | | | | | | | | | | | Guybrush does not have a dedicated SCI pin so it uses VW. BUG=b:181134664 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I12fb7c23718ad2350478b89b321e9f0aa099e53b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51238 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/dedede/var/magolor: Fix DPTF passive and critical policiesKarthikeyan Ramasubramanian2021-03-151-8/+8
| | | | | | | | | | | | | | | | | | | | | | | Some of the temperature sensors defined in baseboard do not exist in magolor. With the format the DPTF policies are defined in magolor, all the entries from the baseboard are included and then the overrides applied. This causes the non-existent DPTF devices to be exported in the ACPI table and in turn OS reading invalid temperatures. Fix the format for DPTF passive and critical policies. BUG=None BRANCH=dedede TEST=Build and boot to OS in magolor. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I43f0b188e49e24657db055ce898ce159d499a22e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
* mb/google/dedede/var/madoo: Fix DPTF passive and critical policiesKarthikeyan Ramasubramanian2021-03-151-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | Some of the temperature sensors defined in baseboard do not exist in madoo. With the format the DPTF policies are defined in madoo, all the entries from the baseboard are included and then the overrides applied. This causes the non-existent DPTF devices to be exported in the ACPI table and in turn OS reading invalid temperatures. Fix the format for DPTF passive and critical policies. BUG=b:182513022 BRANCH=dedede TEST=Build and boot to OS in madoo. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Idc5d0b357d61b9346b4d20ec8322b124c9655b4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
* mb/supermicro/x11-lga1151-series: add support of X11SSH-LN4F to X11SSH-FAlexander Couzens2021-03-153-2/+10
| | | | | | | | | | | | | | The X11SSH-LN4F and X11SSH-F are very similiar. They both use the same PCB and use the same Supermicro BIOS ID. The X11SSH-LN4F has 4 NICs in difference to the X11SSH-F which only has 2 NICs. The two additional NICs aren't populated on the X11SSH-F. Enable the PCIe root ports connected to the two additional Intel NICs. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Change-Id: Id4e66be47ceef75905ba760b8d5a14284e130f63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
* mb/prodrive/hermes: Drop AZALIA_PLUGIN_SUPPORTPatrick Rudolph2021-03-151-1/+0
| | | | | | | | | | | | Already selected by SoC. Change-Id: I1d941881f50350b6b581416a2e722ea2e7485a1c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/google/dedede/var/sasukette: Add USB2 PHY parametersTao Xia2021-03-151-1/+24
| | | | | | | | | | | | | | This change adds fine-tuned USB2 PHY parameters for sasukette. BUG=180753635 TEST=Built and verified USB2 eye diagram test result Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I5612e7dcca15b340763dee1475e979ee551a2146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* soc/intel/alderlake: Drop 100ms delay and do not poll Link ActiveJohn Zhao2021-03-151-14/+0
| | | | | | | | | | | | | | | Drop the 100ms delay in the _PS0 method because kernel already adds this 100ms. This change also drops polling TBT PCIe root ports Link Active State because this scheme is not applicable for SW CM. BUG=None TEST=Built Alderlake coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I792d3c8ca4249ed74d4090ec1efba5a180429c75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51191 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/volteer/variant/lindar: Disable SA GV for Samsung memory with ↵Kevin Chang2021-03-153-0/+15
| | | | | | | | | | | | | | | | | | | wrong date code MB Disable SA GV, because factory used Samsung memory with wrong date code. So we need to use board version to identify build MB phase to disable SA GV. Disable SA GV when board version equal one. BUG=b:179747696 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I51f4adcf0dd8dbf1cf39d8aec6e4303565551e5f Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
* vc/intel/fsp/fsp2_0/cooperlake_sp: Update memory map hob for WW06 FSPJohnny Lin2021-03-151-1/+1
| | | | | | | | | | Change-Id: Id534e1b73e73bbb9d944c988d1ef66bc1f463eff Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50867 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Deomid "rojer" Ryabkov <rojer9@fb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/intel/tglrvp: Enable RTD3 for WWANBora Guvendik2021-03-152-2/+14
| | | | | | | | | | | | | | | Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root Port 4 and provide the reset GPIO / src clk pin. BUG=none TEST=Boot to OS, verify the link is in L2 state during S0ix. Change-Id: I669e02bd02e3af878648a6f3cf4fbb4d06c9857f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
* mb/google/dedede/var/storo: Support LTE modulechenzanxi2021-03-154-0/+44
| | | | | | | | | | | | | | Add LTE module support into devicetree and associated GPIO configuartion. BUG=b:177955524 BRANCH=dedede TEST=LTE function is OK Change-Id: I9aff9608e08eae00ab5ac8547f63bc83b62fea78 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/google/dedede/var/storo:Add P-sensor for storochenzanxi2021-03-151-0/+67
| | | | | | | | | | | | | | | Add P-sensor into devicetree for storo according to configuration information provided by the vendor. BUG=b:177392203 BRANCH=dedede TEST=built storo firmware and verified P-sensor function Change-Id: Iced4ab7d94b38ef8b1807955cbb887454accb1e8 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
* mb/google/dedede/var/storo: Add codec and speaker amplifier supportchenzanxi2021-03-151-0/+26
| | | | | | | | | | | | | | | Add audio codec and speaker amplifier support into devicetree BUG=b:179057895 BRANCH=dedede TEST=audio function is OK Change-Id: Ia864ac47223adb80463966209f6ff3640b715378 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51003 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/dedede/var/storo: Add camera supportchenzanxi2021-03-154-0/+122
| | | | | | | | | | | | | | | | | | | To support mipi camera. 1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU 2. add IPU/VCM/NVM/CAM1 into devicetree To support usb camera. add camera support in devicetree and associated GPIO configuration. BUG=b:177393430, b:177388006 TEST=Build and boot to OS. Camera function is OK. Change-Id: I98d5708d1955406c2e46db972903057bb3d12dcc Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50995 Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/lenovo/t440p: update VBT to version 2179Da Lao2021-03-151-0/+0
| | | | | | | | | | | | | | | | | | | | | | | Update T440p's VBT from version 1215 to version 2179. Extracted using VBiosFinder (https://github.com/coderobe/VBiosFinder) from the latest bios update file: https://download.lenovo.com/pccbbs/mobiles/gluj42us.iso The new version solves the problem that DP output was broken under Windows. Test: boot t440p with both SeaBIOS and Tianocore payloads, verify dp output and backlight control all works under both Linux and Windows. Signed-off-by: Da Lao <dalao@tutanota.com> Change-Id: If8669b8de6fa0801e261138651b8b2cf50432a70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jamal Wright <Crabstorage@getbackinthe.kitchen>
* security/intel/stm/Makefile.inc: Fix typoBenjamin Doron2021-03-151-1/+1
| | | | | | | | | | | | In both the Kconfig and Makefile in this directory, "STM_TTYS0_BASE" is used. Therefore, fix the typo. Change-Id: Ie83ec31c7bb0f6805c0225ee7405e137a666a5d3 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51206 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/tigerlake: Remove obsolete CNVi Bluetooth PCI deviceCliff Huang2021-03-153-4/+0
| | | | | | | | | | | | There is no PCI host interface for this version of CNVi BT. CNVi BT on Tigerlake is an USB device. Change-Id: Ib71a827c36dfac55c3e5ce586b00a26fc6264464 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50900 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/intel/tglrvp/variants: Disable non-existing BT PCI interface and add BT flagCliff Huang2021-03-152-2/+6
| | | | | | | | | | | | | Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is enumerated. Change-Id: I8de5615235f24e6169bf67dbbadb92e69437bc4e Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50899 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/volteer/variants: Disable non-existing BT PCI interface and add BT ↵Cliff Huang2021-03-151-1/+2
| | | | | | | | | | | | | | | flag Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is enumerated. Change-Id: Ic700021d7a09be63ffc2715f31992257e2e893af Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50898 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/hatch: Update DPTF parameters for genesisKenneth Chan2021-03-151-17/+14
| | | | | | | | | | | | | | update the DPTF parameters received from the thermal team. BUG=b:181627614 TEST=emerge-ambassador coreboot Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ied6b71d9285662a70446af2e781b630e184c3b19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joe Tessler <jrt@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
* soc/intel/alderlake: Remove obsolete CNVi Bluetooth PCI deviceCliff Huang2021-03-152-3/+0
| | | | | | | | | | | There is no PCI host interface for Cnvi BT in Alderlake. CNVi BT on Alderlake is an USB device. Change-Id: I3e08c6d6f00e81267dc28c9b37b2dfff5cd75db1 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51352 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/brya: Remove BT PCI interface and add BT flagCliff Huang2021-03-151-1/+3
| | | | | | | | | | | | Remove the CNVi BT PCI config and add Bt flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS. Change-Id: I7e8ca1bb6a57721a72478137612d7a9c391ca0b2 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
* mb/intel/adlrvp: Disable non-existing BT PCI interface and add BT flagCliff Huang2021-03-151-1/+3
| | | | | | | | | | | | | Remove the CNVi Bt PCI config and add Bt flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS. Change-Id: I17c3e2761f91fb397d140d1954b6d4b451c4c603 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-31 02:17:01 +0000