summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* mb/google/corsola: Implement regulator interfaceRex-BC Chen2021-11-153-1/+48
| | | | | | | | | | | | | Use regulator interface to use regulator more easily. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied43cba51036c62a120df2afffeb63b5d73f012b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* mb/google/corsola: add configuration for kingler and krabbyRex-BC Chen2021-11-152-0/+10
| | | | | | | | | | | | | | The 'corsola' reference design will include two implementations with different BOM selections - 'krabby' and 'kingler'. TEST=none BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iaf9c6af1a395030937a9a5c00e95d7246ddcb6eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek/mt8186: add SPM register definitionsRex-BC Chen2021-11-151-0/+533
| | | | | | | | | | | | | Add SPM register definitions so that other drivers can use them. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iec2b493e464be9d617226cc8a9875ee3ddb759de Reviewed-on: https://review.coreboot.org/c/coreboot/+/59248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek/mt8186: Enable mmu operation for L2C SRAM and DMARex-BC Chen2021-11-154-11/+15
| | | | | | | | | | | | | | | | | | | 1. Turn off L2C SRAM and reconfigure as L2 cache Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. 2. Configure DMA buffer in DRAM Set DRAM DMA to be non-cacheable to load blob correctly. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If56d29cdd7d9dfaed05e129754aa1f887a581482 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek: move functions of mmu operation to common folderRex-BC Chen2021-11-158-66/+28
| | | | | | | | | | | | | | Move mtk_soc_disable_l2c_sram and mtk_soc_after_dram to common folder which are the same between MT8192, MT8195 and MT8186. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8f49214b932a8d28ed2ca0d764dc745fa8ad330d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek/mt8186: Add support for PMIC MT6366James Lo2021-11-159-4/+1555
| | | | | | | | | | | | | Add basic support for VCORE/VDRAM1/VDDQ of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I22e30421560a32f4a9e15899e8150376b1414494 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/mediatek: change help text of FLASH_DUAL_READRex-BC Chen2021-11-153-3/+3
| | | | | | | | | | | | | Change help text to "dual IO read mode" to reduce noun confusion. Suggestion from this comment: https://review.coreboot.org/c/coreboot/+/58837/comment/40a98af1_dce6bb2b/ Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54b81cdeba3b693451f66e003fb470c9f8c19ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* Add ENV_STAGE_SUPPORTS_SMP to clean up spinlock stubsKyösti Mälkki2021-11-135-45/+12
| | | | | | | | | | | | | | | | | CONFIG(SMP) was an invalid condition to use in cases where one stage requires spinlocks and another one does not. The stage not requiring spinlock still required <smp/spinlock.h> to be implemented with no-op stubs. This reverts commit 037ee4b556 soc/amd/picasso: Add dummy spinlock for psp_verstage Change-Id: Iba52febdeee78294f916775ee9ce8a82d6203570 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
* mb/google/guybrush: Add variant_espi_gpio_tableRob Barnes2021-11-136-43/+65
| | | | | | | | | | | | | | | | | Add separate gpio table for early eSPI bus init. Remove espi GPIO from early_gpio_table. This allows for initializing eSPI separately from other GPIOs. Simplify verstage_mainboard_early_init. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I0cd439f207df7c27575ae363b207293d40485bf8 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
* sod/amd/cezanne: Use LZ4 for FSP-M when using SPI DMARaul E Rangel2021-11-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds about 30 KiB to FSP-M. When not using the SPI DMA controller, this change actually has a ~7 ms boot time penalty. When we use the DMA engine, we end up with about a 5 ms decrease. Once we switch to 100 MHz SPI this will help even more since we have effectively eliminated the decompression time. BUG=b:179699789 TEST=Boot nipperkin to OS and take boot time measurements fspm.bin 0x2efc0 fsp 90953 LZMA (233472 decompressed) fspm.bin 0x2cfc0 fsp 121156 LZ4 (233472 decompressed) - FSP-M / no async - | 508 - finished loading body | 177.019 | 179.384 Δ( 2.36, 0.16%) | ... | 970 - loading FSP-M | 0.346 | 0.346 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.01 Δ( 0.00, 0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 53.916 | 59.475 Δ( 5.56, 0.37%) | - FSP-M / async - | 508 - finished loading body | 177.185 | 179.689 Δ( 2.50, 0.18%) | ... | 970 - loading FSP-M | 0.989 | 0.99 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 9.483 | 12.877 Δ( 3.39, 0.24%) | | 18 - finished LZ4 decompress (ignore for x86) | 10.833 | 0.312 Δ(-10.52, -0.75%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7d0363d27d98d4ed3afc6f802a13ff7986391921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
* Kconfig: Show console DEBUG_FUNC if OVERRIDE_LOGLEVEL is setMarc Jones2021-11-131-1/+1
| | | | | | | | | | | | | Show the DEBUG_FUNC option if COSOLE_OVERRIDE_LOGLEVEL is set, or it will never be available for some mainboards. This was missed in commit cf3dcd6d2975673622c3272e0d7f3e421051fe74 Change-Id: Id2ef287fb39989007f28fc6475209eda0a63c792 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
* soc/amd/psp_verstage: Reboot on verstage_soc_early_init failRob Barnes2021-11-132-2/+9
| | | | | | | | | | | | | | | | | | Calling reboot_into_recovery with NULL context fails. Initializing ctx early also fails because the cmos is not ready until after verstage_soc_early_init. So just reboot and hope for the best. BUG=None TEST=Boot guybrush, suspend/resume guybrush BRANCH=None Change-Id: I7267a14ab048781b8998d3a6f4220de10e7df250 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* Revert "mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 setting"David Wu2021-11-131-2/+2
| | | | | | | | | | | | This reverts commit ba6fdc892d62741e456ac5628fcd6f869c4cb9af. Reason for revert: Refer to intel doc #627075 (Intel_600_Series Chipset_Family_PCH_GPIO_Impl_Sumry_ Rev1p5p1), GPP_R6 ~ GPP_R7 should be NF3 for dmic. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I460fd99b4ad4b9c470f692032ff7ea2b51cad388 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/xeon_sp: Fix size_t type mismatch in print statementPaul Menzel2021-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the format warning below: CC romstage/soc/intel/xeon_sp/memmap.o src/soc/intel/xeon_sp/memmap.c: In function 'fill_postcar_frame': src/soc/intel/xeon_sp/memmap.c:39:62: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] 39 | printk(BIOS_DEBUG, "cbmem base_ptr: 0x%lx, size: 0x%lx\n", cbmem_base, cbmem_size); | ~~^ ~~~~~~~~~~ | | | | long unsigned int size_t {aka unsigned int} | %x As `cbmem_size` is of type `size_t` use the appropriate length modifier `z`. Change-Id: I1ca77de1ce33ce1e97d7c8895c6e75424f0769f5 Found-by: gcc (Debian 11.2.0-10) 11.2.0 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lance Zhao
* google/stout: Remove duplicate recovery mode switch entryKyösti Mälkki2021-11-121-1/+0
| | | | | | | | | Change-Id: I6e742b9d5256da2b7edcca0efda4faf999207465 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* google/butterfly: Refactor get_recovery_mode_switch()Kyösti Mälkki2021-11-121-17/+4
| | | | | | | | | | | | | | | Do not place console output in low-level GPIO functions. The caller of get_recovery_mode_switch() is in vboot_logic.c that is linked in romstage. So presumably recovery mode is broken and is not fixed with this commit either. Change-Id: I2a0fdbb370d54898c72adb29a0e9b990a5fc0ce1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* mb/google/trogdor: Modify BOE panel_id for mrblandZanxi Chen2021-11-121-3/+5
| | | | | | | | | | | | | | | | | Modify BOE panel_id for mrbland due to hardware changes. BUG=b:205166230,b:198548221 BRANCH=trogdor TEST=emerge-strongbad coreboot Change-Id: I65fecd854c4e3443edc07a44a1d43572d5030e4c Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58995 Reviewed-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/common/block/pcie: Add ADL-P CPU PCIe Device IDsTracy Wu2021-11-122-0/+7
| | | | | | | | | | | | | | | | | List of changes: 1. Add PEG60/10/62 IDs (0x464d/0x460d/0x463d) into device/pci_ids.h 2. Add these new IDs into pcie_device_ids[] in pcie.c BUG=b:205668996 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Change-Id: Idc8a09b0579e1e6053ed2e35b7556a180a5f0088 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
* soc/mediatek/mt8195: Add APU device apc driverFlora Fu2021-11-125-0/+330
| | | | | | | | | | | | | | | | | | | | | | | Add APU device apc driver and set up permissions. APU has its own device apc for control access by domains. For Domain 0, the access to the following slaves are restricted to security read and write: apusys_ao-2, apusys_ao-4, apusys_ao-5, apu_sctrl_reviser, apu_iommu0_r1 apu_iommu0_r2, apu_iommu0_r3, apu_iommu0_r4 apu_iommu1_r1, apu_iommu1_r2, apu_iommu1_r3,apu_iommu1_r4 For VPU, D0/D5 are set as no protection, other domains are forbidden. For other slaves, the D0 is no protection, other domains are forbidden. BUG=b:203145462 BRANCH=cherry TEST=boot cherry, check dump log and test permissions Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: If92d3b02ac4966332315b85d68e0f48c6a9fce85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
* soc/amd/cezanne: Use LZ4 for FSP-SRaul E Rangel2021-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change increases the fsps.bin by 20 KiB, but it decreases decompression time. When not using preloading we save about 4 ms, when using preloading we save about 6. BUG=b:179699789 TEST=Boot nipperkin to OS fsps.bin 0x4afc0 fsp 66253 LZMA (200704 decompressed) fsps.bin 0x45fc0 fsp 87157 LZ4 (200704 decompressed) - FSP-S / no async - | 505 - starting to verify keyblock/preamble (RSA) | 9.36 | 11.012 Δ( 1.65, 0.11%) | ... | 971 - loading FSP-S | 7.095 | 6.141 Δ( -0.95, -0.07%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.008 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 15.149 | 8.98 Δ( -6.17, -0.42%) | | 954 - calling FspSiliconInit | 0.038 | 0.037 Δ( -0.00, -0.00%) | - FSP-S / async - | 508 - finished loading body | 177.978 | 179.689 Δ( 1.71, 0.12%) | ... | 971 - loading FSP-S | 6.928 | 7.225 Δ( 0.30, 0.02%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.011 | 0.01 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 8.312 | 0.241 Δ( -8.07, -0.58%) | | 954 - calling FspSiliconInit | 0.091 | 0.09 Δ( -0.00, -0.00%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib0479ed3c92158799ea2b023bd2ce4c5c09757dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* soc/amd/cezanne: Preload FSP-SRaul E Rangel2021-11-122-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSP-S is normally memmapped and then decompressed. There are about 7 ms between starting ramstage, and loading FSP-S. By preloading we can ensure the fsps.bin is already in RAM by the time we need it. This reduces boot time by about 7 ms. BUG=b: TEST=Boot nipperkin and see ~7ms reduction in boot time | 10 - start of ramstage | 0.044 | 0.044 Δ( 0.00, 0.00%) | | 30 - device enumeration | 1.899 | 2.073 Δ( 0.17, 0.01%) | | 971 - loading FSP-S | 6.645 | 6.628 Δ( -0.02, -0.00%) | | 15 - starting LZMA decompress (ignore for x86) | 0.016 | 0.01 Δ( -0.01, -0.00%) | | 16 - finished LZMA decompress (ignore for x86) | 15.266 | 8.316 Δ( -6.95, -0.47%) | | 954 - calling FspSiliconInit | 0.08 | 0.09 Δ( 0.01, 0.00%) | CBFS DEBUG: _cbfs_alloc(name='fsps.bin', alloc=0xc9761e5c(0xc97a3f0c), force_ro=false, type=-1) CBFS: Found 'fsps.bin' @0x1a1fc0 size 0x102cd in mcache @0xc97dd208 waiting for thread took 1 us <-- fsps.bin was preloaded CBFS DEBUG: get_preload_rdev(name='fsps.bin') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5a728047b8ad92d70bba8485017579aa3df48d95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
* soc/amd/common/block/lpc: Set FSP-S/M alignment to 64 when using SPI DMARaul E Rangel2021-11-121-1/+9
| | | | | | | | | | | | | This will enable reading FSP-S/M using the SPI DMA controller. BUG=B:179699789 TEST=Build guybrush with SPI DMA enabled and verify alignment is set Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I282b9989d8e95c93603c6f69616a8f236a4e2e35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* mb/google/brya/var/primus: Disable autonomous GPIO power managementCasper Chang2021-11-121-1/+10
| | | | | | | | | | | | | | | | Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:201054849 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Change-Id: If5a99a96e5d4b84be3f2c1165283ce249ca75d58 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* google/deltaur,drallion,sarien: Refactor ChromeOS GPIOsKyösti Mälkki2021-11-123-66/+21
| | | | | | | | | | | | | Low-level GPIOs should not depend on late cros_gpios that should be guarded with CHROMEOS and implemented for the purpose of ACPI \OIPG package generation. Change-Id: Ibe708330504bc819e312eddaf5dfe4016cda21a1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* mb/google,intel: Add ChromeOS GPIOs to onboard.hKyösti Mälkki2021-11-1218-38/+92
| | | | | | | | Change-Id: Ia473596e3c9a75587cd1288c8816bfef66bef82e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* drivers/amd/agesa/romstage.c: Remove lapic_id checkArthur Heymans2021-11-121-8/+4
| | | | | | | | | | | The APs don't execute this codepath but ap_romstage_main(). Change-Id: If884001bc8c5363efbbf00422a9a700896318f7b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* mb/google/brya/var/felwinter: Enable SaGvEric Lai2021-11-111-1/+1
| | | | | | | | | | | | | Enable SaGv. BUG=b:198235324 TEST=Boot into without issues. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3cbff8d28bb5b5bfdad323f348b9f880245d049d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/system76/gaze16: Add System76 Gazelle 16Jeremy Soller2021-11-1126-0/+1277
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://tech-docs.system76.com/models/gaze16/README.html The gaze16 comes in 3 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet controller - NVIDIA RTX 3060, using Realtek Ethernet controller - NVIDIA RTX 3060, using onboard Intel I219-V Ethernet controller Tested on the 3050 variant. Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - 2.5" SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio* - 3.5mm microphone input* - S3 suspend/resume - Booting to Pop!_OS Linux 21.04 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics - Mini DisplayPort output (requires NVIDIA GPU) - 3.5mm audio input/output detection on Windows Change-Id: Ifb90f9b73a10abf53a21738e2c466d539df9a37c Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/brya/var/kano: Configure USB2 and USB3 portDavid Wu2021-11-111-0/+6
| | | | | | | | | | | | | Disable unused USB2 and USB3 port BUG=b:192370253 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia2fa10fb21e0a42e51728bc3d78163ca213f8d91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* lynxpoint/broadwell: Use `azalia_codecs_init()`Angel Pons2021-11-114-30/+8
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: Id25d2797a91b05264b1a76fa8faec0533dd5ac78 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59120 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* device/azalia_device: Drop unused function parameterAngel Pons2021-11-117-8/+8
| | | | | | | | | | | The `dev` parameter of the `azalia_codecs_init()` function is not used. Remove it, and update all call sites accordingly. Change-Id: Idbe4a6ee5e81d5a7fd451fb83e0fe91bd0c09f0e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59119 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* haswell/lynxpoint/broadwell: Use `azalia_codec_init()`Angel Pons2021-11-116-103/+8
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: I83cf1a3a1a3854c9283ccac5e254357a32638dda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59118 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* device/azalia_device: Adapt and export `codec_init()`Angel Pons2021-11-112-3/+4
| | | | | | | | | | | | | | | | Make the `codec_init()` function non-static so that it can be used in other places. Rename it to `azalia_codec_init()` for consistency with the other functions of the API. Also, update the function's signature to make it more flexible. Remove the unused `dev` parameter and allow callers to pass the verb table to use. Update the original call site to preserve behavior. Change-Id: I5343796242065b5fedc78cd95bcf010c9e2623dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59117 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* lynxpoint/broadwell: Use `azalia_program_verb_table()`Angel Pons2021-11-114-21/+3
| | | | | | | | | | | Use the `azalia_program_verb_table()` function in preparation to deduplicate Azalia init code. Change-Id: I22cfee41e001c9ecf4fbac37aadbd12f43ac8aaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59116 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* azalia_device: Report if codec verb loading failedAngel Pons2021-11-111-2/+5
| | | | | | | | | | | Handle the return value of `azalia_program_verb_table()` and print different messages accordingly. Change-Id: I99e9e1416217c5e67c529944736affb31f9c7d2f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59115 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* sb/intel/bd82x6x: Use `azalia_codecs_init()`Angel Pons2021-11-112-96/+4
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: I982c1725d5affe95a20aa6713a246cd6b1ad270c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59114 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* sb/intel/ibexpeak: Use `azalia_codecs_init()`Angel Pons2021-11-112-97/+4
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: Ib3b40e5788c6315cad02b670346997c9179e5fab Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/i82801jx: Use `azalia_codecs_init()`Angel Pons2021-11-112-97/+4
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: Idc8d272d76a031c6835baf952eca03fc2e306525 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/i82801ix: Use `azalia_codecs_init()`Angel Pons2021-11-112-97/+4
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: I53d993ff74e7952c34fbe94d49d3ebf2489dd414 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/i82801gx: Use `azalia_codecs_init()`Angel Pons2021-11-112-97/+4
| | | | | | | | | | | Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: Icc435dd0c7cef1b458c877b5a64e6dba1d10524c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/i82801{ix,jx}: Initialise all codecsAngel Pons2021-11-112-2/+2
| | | | | | | | | | These southbridges support four external codecs, not three. Change-Id: I3f352451d16dceefa0f3fabf413a0e57aa498df5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* device/azalia_device: Export `codecs_init()`Angel Pons2021-11-112-2/+3
| | | | | | | | | | | | | Make the `codecs_init()` function non-static so that it can be used in other places. Rename it to `azalia_codecs_init()` to avoid name clashes with static definitions in southbridge code (which will be removed in subsequent commits). Change-Id: I080a73102b0c4f9f8a283cd93bba9b3b23169be0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/bd82x6x: Remove unused typedefAngel Pons2021-11-111-2/+0
| | | | | | | | Change-Id: If725a369e7a12fbddd7b108e557d34a13bc78c09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel/i82801gx: Program PC BEEP verbsAngel Pons2021-11-111-0/+2
| | | | | | | | | | | | For consistency with other Intel southbridges, program PC BEEP verbs. None of the boards in the tree using this southbridge provide PC BEEP verbs, so this change makes no difference. Change-Id: I94d24999af819cf3951510586fd4864d1ed3f2f1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* sb/intel: Use `azalia_program_verb_table()` functionAngel Pons2021-11-115-86/+9
| | | | | | | | | | | | | | | Use the `azalia_program_verb_table()` function in preparation to deduplicate Azalia init code. With this change, the "Azalia: verb loaded." message is now printed when programming the verbs failed. This will be addressed once `codec_init()` has been deduplicated. Change-Id: I5d9e0f19429620166f2a6ef48ec7c963ee64b59c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mb/google/brya/var/kano: Add gpio-keys ACPI node for PENHDavid Wu2021-11-113-0/+21
| | | | | | | | | | | | | | | Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:192415743 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia36119678cfd5c65a62685d3312537d9aa21e83b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
* soc/intel: move SGX ACPI code to block/acpiMichael Niewöhner2021-11-116-59/+68
| | | | | | | | | | | | Move SGX ACPI code to block/acpi. Also move the register definitions there, since they are misplaced in intelblocks/msr.h and are used only once anyways. Change-Id: I089d0ee97c37df2be060b5996183201bfa9b49ca Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/guybrush: Define ACPI Power Resources for FPMCUKarthikeyan Ramasubramanian2021-11-1110-180/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all the power sequencing for FPMCU is done explicitly in different stages of coreboot. This can all be done by adding ACPI power resources for FPMCU and clean up the unused code. Here is the expected power sequence: PowerUp : Assert EN_PWR_FP -> 3 ms delay -> De-assert FPMCU_RST_ODL Shutdown : De-assert EN_PWR_FP -> Assert FPMCU_RST_ODL Reboot : Shutdown -> 200 ms delay -> PowerUp BUG=None TEST=Build and boot to OS in Guybrush. Ensure that the FP is able to unlock the system after the first login attempt. Ensure that the FP is able to wakeup the system. Observed that the power resource is added correctly in the FPMCU ACPI object Name (_PR0, Package (0x01) // _PR0: Power Resources for D0 { PR01 }) Name (_PR3, Package (0x01) // _PR3: Power Resources for D3hot { PR01 }) PowerResource (PR01, 0x00, 0x0000) { Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x01) } Method (_ON, 0, Serialized) // _ON_: Power On { \_SB.CTXS (0x0B) \_SB.STXS (0x20) \_SB.STXS (0x0B) } Method (_OFF, 0, Serialized) // _OFF: Power Off { \_SB.CTXS (0x0B) \_SB.CTXS (0x20) } } Change-Id: I52322eaecf6961ff9a196ca9ab2d58b7d4599d4f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
* mb/google/brya/var/taeko: Enable CPU PCIE RP 1Joey Peng2021-11-112-2/+30
| | | | | | | | | | | | | Modify settings to enable CPU PCIE RP 1 according to schematics. BUG=b:205504257 TEST=emerge-brya coreboot and can successfully boot with ssd and emmc. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I0f817c860f2b295c6aa84fa1999d374d99f817f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/guybrush/dewatt: update dewatt configChris.Wang2021-11-111-0/+50
| | | | | | | | | | | | | | copy config from guybrush reference board. BUG=b:204151079 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ide9e002390e59725dc0e45f83280db2a78270993 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 04:59:26 +0000