1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <mainboard.h>
#include <config.h>
#include <types.h>
#include <lib.h>
#include <console.h>
#include <cpu.h>
#include <globalvars.h>
#include <device/device.h>
#include <device/pci.h>
#include <string.h>
#include <msr.h>
#include <io.h>
#include <amd/k8/k8.h>
#include <mc146818rtc.h>
#include <spd.h>
unsigned long uma_memory_start, uma_memory_size;
/********************************************************
* dbm690t uses a BCM5789 as on-board NIC.
* It has a pin named LOW_POWER to enable it into LOW POWER state.
* In order to run NIC, we should let it out of Low power state. This pin
* is controlled by sb600 GPM3.
* RRG4.2.3 GPM as GPIO
* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers:
* I/O C50, C51, C52, PM I/O94, 95, 96.
* RRG4.2.3.1 GPM pins as Input
* RRG4.2.3.2 GPM pins as Output
********************************************************/
static void enable_onboard_nic(void)
{
u8 byte;
printk(BIOS_INFO, "enable_onboard_nic.\n");
outb(0x13, 0xC50);
byte = inb(0xC51);
byte &= 0x3F;
byte |= 0x40;
outb(byte, 0xC51);
byte = inb(0xC52);
byte &= ~0x8;
outb(byte, 0xC52);
byte = inb(0xC51);
byte &= 0x3F;
byte |= 0x80; /* 7:6=10 */
outb(byte, 0xC51);
byte = inb(0xC52);
byte &= ~0x8;
outb(byte, 0xC52);
}
/*************************************************
* enable the dedicated function in dbm690t board.
* This function called early than rs690_enable.
*************************************************/
void dbm690t_enable(struct device * dev)
{
struct mainboard_amd_dbm690t_config *mainboard = dev->device_configuration;
#if (CONFIG_GFXUMA == 1)
struct msr msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk(BIOS_INFO, "dbm690t_enable, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk(BIOS_INFO, "dbm690t_enable, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", msr2.lo, msr2.hi);
switch (msr.lo) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x2000000; /* 32M recommended UMA */
break;
case 0x18000000: /* 384M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
}
uma_memory_start = msr.lo - uma_memory_size;/* TOP_MEM1 */
printk(BIOS_INFO, "dbm690t_enable: uma size 0x%08lx, memory start 0x%08lx\n", uma_memory_size, uma_memory_start);
/* TODO: TOP_MEM2 */
#else
uma_memory_size = 0x8000000; /* 128M recommended UMA */
uma_memory_start = 0x38000000; /* 1GB system memory supposed */
#endif
printk(BIOS_INFO, "dbm690t_enable. dev=%p\n", dev);
enable_onboard_nic();
}
struct device_operations dbm690t = {
.id = {.type = DEVICE_ID_PCI,
{.pci = {.vendor = PCI_VENDOR_ID_AMD,
.device = 1}}},
.constructor = default_device_constructor,
.phase3_chip_setup_dev = dbm690t_enable,
};
|
