path: root/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */


#define ASSEMBLY 1
#define __PRE_RAM__

#define SYSTEM_TYPE 0	/* SERVER */
//#define SYSTEM_TYPE 1	/* DESKTOP */
//#define SYSTEM_TYPE 2	/* MOBILE */


#define RAMINIT_SYSINFO 1
#define CACHE_AS_RAM_ADDRESS_DEBUG 1

#define DEBUG_SMBUS 1

#define SET_NB_CFG_54 1

//used by raminit
#define QRANK_DIMM_SUPPORT 1

//used by incoherent_ht
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 0

//used by init_cpus and fidvid
#define FAM10_SET_FIDVID 1
#define FAM10_SET_FIDVID_CORE_RANGE 0

#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"

/* FIXME: Use console.c post_code function */
static void post_code(u8 value) {
	outb(value, 0x80);
}

#if (CONFIG_USE_FAILOVER_IMAGE == 0)
#include "arch/i386/lib/console.c"
#include "pc80/serial.c"
#include "lib/ramtest.c"
#include <cpu/amd/model_10xxx_rev.h>
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
#endif

#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"

#include <console/loglevel.h>
void die(const char *msg);
int do_printk(int msg_level, const char *fmt, ...) __attribute__((format(printf, 2, 3)));
#define printk_emerg(fmt, arg...)   do_printk(BIOS_EMERG   ,fmt, ##arg)
#include "cpu/x86/bist.h"


#if (CONFIG_USE_FAILOVER_IMAGE == 0)

#include "northbridge/amd/amdfam10/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "northbridge/amd/amdfam10/setup_resource_map.c"

#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"

static void memreset_setup(void)
{
	//GPIO on amd8111 to enable MEMRST ????
	outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);	// REVC_MEMRST_EN=1
	outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}


static void memreset(int controllers, const struct mem_controller *ctrl)
{
}


static void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
	int ret,i;
	u8 device = ctrl->spd_switch_addr;

	printk_debug("switch i2c to : %02x for node %02x \n", device, ctrl->node_id);

	/* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
	i=2;
	do {
		ret = smbus_write_byte(SMBUS_HUB, 0x01, (1<<(device & 0x7)));
	} while ((ret!=0) && (i-->0));
	smbus_write_byte(SMBUS_HUB, 0x03, 0);
}


static int spd_read_byte(u32 device, u32 address)
{
	int result;
	result = smbus_read_byte(device, address);
	return result;
}

#include "northbridge/amd/amdfam10/amdfam10.h"
#include "northbridge/amd/amdht/ht_wrapper.c"

#include "include/cpu/x86/mem.h"
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
#include "northbridge/amd/amdfam10/raminit_amdmct.c"
#include "northbridge/amd/amdfam10/amdfam10_pci.c"

#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_10xxx/init_cpus.c"
#include "cpu/amd/model_10xxx/fidvid.c"

#endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */


#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"

void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
	int last_boot_normal_flag = last_boot_normal();

	/* Is this a cpu only reset? or Is this a secondary cpu? */
	if ((cpu_init_detectedx) || (!boot_cpu())) {
		if (last_boot_normal_flag) {
			goto normal_image;
		} else {
			goto fallback_image;
		}
	}

	/* Nothing special needs to be done to find bus 0 */
	/* Allow the HT devices to be found */
	/* mov bsp to bus 0xff when > 8 nodes */
	set_bsp_node_CHtExtNodeCfgEn();
	enumerate_ht_chain();

	/* Setup the rom access for 4M */
	amd8111_enable_rom();

	/* Is this a deliberate reset by the bios */
	if (bios_reset_detected() && last_boot_normal_flag) {
		goto normal_image;
	}
	/* This is the primary cpu how should I boot? */
	else if (do_normal_boot()) {
		goto normal_image;
	}
	else {
		goto fallback_image;
	}

normal_image:
	__asm__ volatile ("jmp __normal_image"
		 : /* outputs */
		 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
		);

fallback_image:
 #if CONFIG_HAVE_FAILOVER_BOOT==1
	__asm__ volatile ("jmp __fallback_image"
		 : /* outputs */
		 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
		)
 #endif
	;
}
#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */


void real_main(unsigned long bist, unsigned long cpu_init_detectedx);

void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0.
#if CONFIG_HAVE_FAILOVER_BOOT==1
 #if CONFIG_USE_FAILOVER_IMAGE==1
	failover_process(bist, cpu_init_detectedx);
 #else
	real_main(bist, cpu_init_detectedx);
 #endif
#else
 #if CONFIG_USE_FALLBACK_IMAGE == 1
	failover_process(bist, cpu_init_detectedx);
 #endif
	real_main(bist, cpu_init_detectedx);
#endif
}


#if (CONFIG_USE_FAILOVER_IMAGE==0)
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"

void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{

	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
	u32 bsp_apicid = 0;
	u32 val;
	msr_t msr;

	post_code(0x30);

	if (bist == 0) {
		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */
		/* All cores run this but the BSP(node0,core0) is the only core that returns. */
	}

	post_code(0x32);

	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
	uart_init();
	console_init();
	printk_debug("\n");

//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	// Load MPB
	val = cpuid_eax(1);
	printk_debug("BSP Family_Model: %08x \n", val);
	printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
	printk_debug("bsp_apicid = %02x \n", bsp_apicid);
	printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);

	/* Setup sysinfo defaults */
	set_sysinfo_in_ram(0);

	update_microcode(val);
	post_code(0x33);

	cpuSetAMDMSR();
	post_code(0x34);

	amd_ht_init(sysinfo);
	post_code(0x35);

	/* Setup nodes PCI space and start core 0 AP init. */
	finalize_node_setup(sysinfo);

	/* Setup any mainboard PCI settings etc. */
	setup_mb_resource_map();
	post_code(0x36);

	/* wait for all the APs core0 started by finalize_node_setup. */
	/* FIXME: A bunch of cores are going to start output to serial at once.
	   It would be nice to fixup prink spinlocks for ROM XIP mode.
	   I think it could be done by putting the spinlock flag in the cache
	   of the BSP located right after sysinfo.
	 */
	wait_all_core0_started();

 #if CONFIG_LOGICAL_CPUS==1
	/* Core0 on each node is configured. Now setup any additional cores. */
	printk_debug("start_other_cores()\n");
	start_other_cores();
	post_code(0x37);
	wait_all_other_cores_started(bsp_apicid);
 #endif

	post_code(0x38);

 #if FAM10_SET_FIDVID == 1
	msr = rdmsr(0xc0010071);
	printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);

	/* FIXME: The sb fid change may survive the warm reset and only
	   need to be done once.*/
	enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);

	post_code(0x39);

	if (!warm_reset_detect(0)) {			// BSP is node 0
		init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
	} else {
		init_fidvid_stage2(bsp_apicid, 0);	// BSP is node 0
	}

	post_code(0x3A);

	/* show final fid and vid */
	msr=rdmsr(0xc0010071);
	printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
 #endif


	/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
	if (!warm_reset_detect(0)) {
		print_info("...WARM RESET...\n\n\n");
		soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
		die("After soft_reset_x - shouldn't see this message!!!\n");
	}

	post_code(0x3B);


	/* FIXME:  Move this to chipset init.
	enable cf9 for hard reset */
	print_debug("enable_cf9_x()\n");
	enable_cf9_x(sysinfo->sbbusn, sysinfo->sbdn);
	post_code(0x3C);

	/* It's the time to set ctrl in sysinfo now; */
	printk_debug("fill_mem_ctrl()\n");
	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
	post_code(0x3D);


	printk_debug("enable_smbus()\n");
	enable_smbus();
	post_code(0x3E);


	memreset_setup();
	post_code(0x40);

//	die("Die Before MCT init.");

	printk_debug("raminit_amdmct()\n");
	raminit_amdmct(sysinfo);
	post_code(0x41);


/*
	dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
	dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
	dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
	dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
*/

//	ram_check(0x00200000, 0x00200000 + (640 * 1024));
//	ram_check(0x40200000, 0x40200000 + (640 * 1024));


//	die("After MCT init before CAR disabled.");

	post_code(0x42);
	printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
	post_cache_as_ram();	// BSP switch stack to ram, copy then execute LB.
	post_code(0x43);	// Should never see this post code.


}


#endif /* CONFIG_USE_FAILOVER_IMAGE==0 */