1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/variants.h>
#include <chip.h>
#include <device/device.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <ec/google/chromeec/ec.h>
#include <intelblocks/power_limit.h>
const struct cpu_power_limits limits[] = {
/* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */
{ PCI_DID_INTEL_ADL_P_ID_10, 15, 15000, 15000, 55000, 55000, 123000 },
{ PCI_DID_INTEL_ADL_P_ID_7, 15, 15000, 15000, 55000, 55000, 123000 },
{ PCI_DID_INTEL_ADL_P_ID_6, 15, 15000, 15000, 55000, 55000, 123000 },
{ PCI_DID_INTEL_ADL_P_ID_5, 28, 28000, 28000, 64000, 64000, 90000 },
{ PCI_DID_INTEL_ADL_P_ID_3, 28, 28000, 28000, 64000, 64000, 140000 },
{ PCI_DID_INTEL_ADL_P_ID_5, 45, 45000, 45000, 95000, 95000, 125000 },
{ PCI_DID_INTEL_ADL_P_ID_4, 45, 45000, 45000, 115000, 115000, 215000 },
{ PCI_DID_INTEL_ADL_P_ID_3, 45, 45000, 45000, 115000, 115000, 215000 },
{ PCI_DID_INTEL_ADL_P_ID_1, 45, 45000, 45000, 95000, 95000, 125000 },
};
const struct system_power_limits sys_limits[] = {
/* SKU_ID, TDP (Watts), psys_pl2 (Watts) */
{ PCI_DID_INTEL_ADL_P_ID_10, 15, 135 },
{ PCI_DID_INTEL_ADL_P_ID_7, 15, 135 },
{ PCI_DID_INTEL_ADL_P_ID_6, 15, 135 },
{ PCI_DID_INTEL_ADL_P_ID_5, 28, 230 },
{ PCI_DID_INTEL_ADL_P_ID_3, 28, 230 },
{ PCI_DID_INTEL_ADL_P_ID_5, 45, 230 },
{ PCI_DID_INTEL_ADL_P_ID_4, 45, 230 },
{ PCI_DID_INTEL_ADL_P_ID_3, 45, 230 },
{ PCI_DID_INTEL_ADL_P_ID_1, 45, 230 },
};
/*
* Psys_pmax considerations.
*
* Given the hardware design in brask, the serial shunt resistor is 0.005ohm.
* The full scale of hardware PSYS signal 1.6v maps to system current 13.52A
* instead of real system power. The equation is shown below:
* PSYS = 1.6v = (0.005ohm x 13.52A) x 50 (INA213, gain 50V/V) x R501/(R501 + R510)
* R501/(R501 + R510) = 0.47 = 15K / (15K + 16.9K)
*
* The Psys_pmax is a SW setting which tells IMVP9.1 the mapping b/w system input
* current and the actual system power. Since there is no voltage information
* from PSYS, different voltage input would map to different Psys_pmax settings:
* For Type-C 15V, the Psys_pmax should be 15v x 13.52A = 202.8W
* For Type-C 20V, the Psys_pmax should be 20v x 13.52A = 270.4W
* For a barrel jack, the Psys_pmax should be 19.5v x 13.52A = 263.6W
*
* Imagine that there is a type-c 100W (20V/5A) connected to DUT w/ full loading,
* and the Psys_pmax setting is 270.4W. Then IMVP9.1 can calculate the current system
* power = 270.4W * 5A / 13.52A = 100W, which is the actual system power.
*/
const struct psys_config psys_config = {
.efficiency = 97,
.psys_imax_ma = 13520,
.bj_volts_mv = 19500
};
void variant_devtree_update(void)
{
size_t total_entries = ARRAY_SIZE(limits);
variant_update_psys_power_limits(limits, sys_limits, total_entries, &psys_config);
variant_update_power_limits(limits, total_entries);
}
|
