1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
#
#
#
# SPDX-License-Identifier: GPL-2.0-only
chip northbridge/amd/agesa/family14/root_complex
device cpu_cluster 0 on
chip cpu/amd/agesa/family14
device lapic 0 on end
end
end
device domain 0 on
subsystemid 0x1022 0x1510 inherit
chip northbridge/amd/agesa/family14
device pci 0.0 on end # Root Complex
device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
device pci 4.0 on end # PCIE P2P bridge PCIe slot
device pci 5.0 off end # PCIE P2P bridge
device pci 6.0 on end # GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168)
device pci 7.0 off end # PCIE P2P bridge
device pci 8.0 off end # NB/SB Link P2P bridge
end # agesa northbridge
chip southbridge/amd/cimx/sb800
device pci 11.0 on end # SATA
device pci 12.0 on end # OHCI USB 0-4
device pci 12.2 on end # EHCI USB 0-4
device pci 13.0 on end # OHCI USB 5-9
device pci 13.2 on end # EHCI USB 5-9
device pci 14.0 on end # SM
device pci 14.1 off end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
chip superio/fintek/f71869ad
register "multi_function_register_1" = "0x01"
register "multi_function_register_2" = "0x6f"
register "multi_function_register_3" = "0x24"
register "multi_function_register_4" = "0x00"
register "multi_function_register_5" = "0x60"
# HWM configuration registers
register "hwm_smbus_address" = "0x98"
register "hwm_smbus_control_reg" = "0x02"
register "hwm_fan_type_sel_reg" = "0x00"
register "hwm_fan1_temp_adj_rate_reg" = "0x33"
register "hwm_fan_mode_sel_reg" = "0x07"
register "hwm_fan1_idx_rpm_mode" = "0x0e"
register "hwm_fan1_seg1_speed_count" = "0xff"
register "hwm_fan1_seg2_speed_count" = "0x0e"
register "hwm_fan1_seg3_speed_count" = "0x07"
register "hwm_fan1_temp_map_sel" = "0x8c"
register "hwm_temp_sensor_type" = "0x0E" # default value
#
# XXX: 4e is the default index port and .xy is the
# LDN indexing the pnp_info array found in the superio.c
# NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124,
# see page 18 from Fintek F71869 V1.1 datasheet.
device pnp 2e.00 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.01 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
# COM2 not physically wired on board.
device pnp 2e.02 off # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.03 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 2e.04 on # Hardware Monitor
io 0x60 = 0x225 # Fintek datasheet says 0x295.
irq 0x70 = 0
end
device pnp 2e.05 on # KBC
io 0x60 = 0x060
irq 0x70 = 1 # Keyboard IRQ
irq 0x72 = 12 # Mouse IRQ
end
device pnp 2e.06 off end # GPIO
device pnp 2e.07 on end # WDT
device pnp 2e.08 off end # CIR
device pnp 2e.0a on end # PME
end # f71869ad
end #LPC
device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
device pci 14.5 on end # OHCI FS/LS USB (0x4399)
device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168)
device pci 15.1 on end # PCIe PortB
device pci 15.2 off end # PCIe PortC
device pci 15.3 off end # PCIe PortD
device pci 16.0 on end # OHCI USB 10-13 (0x4397)
device pci 16.2 on end # EHCI USB 10-13 (0x4396)
register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - PortA-D on 15.0-3 are each x1 lanes.
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
end #southbridge/amd/cimx/sb800
chip northbridge/amd/agesa/family14
# These seem unnecessary
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
device pci 18.5 on end
device pci 18.6 on end
device pci 18.7 on end
#
# TODO: Verify the proper SocketId/MemChannelId/DimmId addresses of the SPD
# with i2cdump tool.
# Notes: 0xa0=0x50*2, 0xa2=0x51*2.. 0x50-0x54 are usually RAM modules on the SMBus.
#
register "spdAddrLookup" = "
{
{ {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
}"
end # agesa northbridge
end #domain
end #northbridge/amd/agesa/family14/root_complex
|
