1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
/*
* This file consists of data imported from bdk-config.c
*/
// coreboot
#include <string.h>
#include <assert.h>
#include <device/i2c.h>
#include <device/i2c_simple.h>
#include <endian.h>
#include <soc/timer.h>
// BDK
#include <libbdk-arch/bdk-numa.h>
#include <libbdk-hal/bdk-config.h>
#include <libbdk-hal/bdk-twsi.h>
#include <libbdk-boot/bdk-watchdog.h>
/**
* Do a twsi read from a 7 bit device address using an (optional)
* internal address. Up to 4 bytes can be read at a time.
*
* @param twsi_id which TWSI bus to use
* @param dev_addr Device address (7 bit)
* @param internal_addr
* Internal address. Can be 0, 1 or 2 bytes in width
* @param num_bytes Number of data bytes to read (1-4)
* @param ia_width_bytes
* Internal address size in bytes (0, 1, or 2)
*
* @return Read data, or -1 on failure
*/
int64_t bdk_twsix_read_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
uint16_t internal_addr, int num_bytes,
int ia_width_bytes)
{
struct i2c_msg seg[2];
u32 buf;
assert (num_bytes < 5);
assert (ia_width_bytes < 3);
seg[0].flags = 0;
seg[0].slave = dev_addr;
seg[0].buf = (u8 *)&internal_addr;
seg[0].len = ia_width_bytes;
seg[1].flags = I2C_M_RD;
seg[1].slave = dev_addr;
seg[1].buf = (u8 *)&buf;
seg[1].len = num_bytes;
if (i2c_transfer(twsi_id, seg, ARRAY_SIZE(seg)) < 0)
return -1;
return cpu_to_be32(buf);
}
/**
* Write 1-8 bytes to a TWSI device using an internal address.
*
* @param twsi_id which TWSI interface to use
* @param dev_addr TWSI device address (7 bit only)
* @param internal_addr
* TWSI internal address (0, 8, or 16 bits)
* @param num_bytes Number of bytes to write (1-8)
* @param ia_width_bytes
* internal address width, in bytes (0, 1, 2)
* @param data Data to write. Data is written MSB first on the twsi bus,
* and only the lower num_bytes bytes of the argument are
* valid. If a 2 byte write is done, only the low 2 bytes of
* the argument is used.
*
* @return Zero on success, -1 on error
*/
int bdk_twsix_write_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
uint16_t internal_addr, int num_bytes,
int ia_width_bytes, uint64_t data)
{
struct i2c_msg seg;
u8 buf[10];
assert (num_bytes <= 8);
assert (ia_width_bytes < 3);
memcpy(buf, &internal_addr, ia_width_bytes);
memcpy(&buf[ia_width_bytes], &data, num_bytes);
seg.flags = 0;
seg.slave = dev_addr;
seg.buf = buf;
seg.len = num_bytes + ia_width_bytes;
return platform_i2c_transfer(twsi_id, &seg, 1);
}
void bdk_watchdog_set(unsigned int timeout_ms)
{
watchdog_set(0, timeout_ms);
}
void bdk_watchdog_poke(void)
{
watchdog_poke(0);
}
void bdk_watchdog_disable(void)
{
watchdog_disable(0);
}
int bdk_watchdog_is_running(void)
{
return watchdog_is_running(0);
}
|
