1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <assert.h>
#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <soc/dsi.h>
#include <timer.h>
void mtk_dsi_configure_mipi_tx(u32 data_rate, u32 lanes)
{
u32 txdiv0, txdiv1;
u64 pcw;
u32 reg;
int i;
reg = read32(&mipi_tx0->dsi_bg_con);
reg = (reg & (~RG_DSI_V02_SEL)) | (4 << 20);
reg = (reg & (~RG_DSI_V032_SEL)) | (4 << 17);
reg = (reg & (~RG_DSI_V04_SEL)) | (4 << 14);
reg = (reg & (~RG_DSI_V072_SEL)) | (4 << 11);
reg = (reg & (~RG_DSI_V10_SEL)) | (4 << 8);
reg = (reg & (~RG_DSI_V12_SEL)) | (4 << 5);
reg |= RG_DSI_BG_CKEN;
reg |= RG_DSI_BG_CORE_EN;
write32(&mipi_tx0->dsi_bg_con, reg);
udelay(30);
clrsetbits32(&mipi_tx0->dsi_top_con, RG_DSI_LNT_IMP_CAL_CODE,
8 << 4 | RG_DSI_LNT_HS_BIAS_EN);
setbits32(&mipi_tx0->dsi_con,
RG_DSI0_CKG_LDOOUT_EN | RG_DSI0_LDOCORE_EN);
clrsetbits32(&mipi_tx0->dsi_pll_pwr, RG_DSI_MPPLL_SDM_ISO_EN,
RG_DSI_MPPLL_SDM_PWR_ON);
clrbits32(&mipi_tx0->dsi_pll_con0, RG_DSI0_MPPLL_PLL_EN);
if (data_rate > 500 * MHz) {
txdiv0 = 0;
txdiv1 = 0;
} else if (data_rate >= 250 * MHz) {
txdiv0 = 1;
txdiv1 = 0;
} else if (data_rate >= 125 * MHz) {
txdiv0 = 2;
txdiv1 = 0;
} else if (data_rate >= 62 * MHz) {
txdiv0 = 2;
txdiv1 = 1;
} else {
/* MIN = 50 */
assert(data_rate >= MTK_DSI_DATA_RATE_MIN_MHZ * MHz);
txdiv0 = 2;
txdiv1 = 2;
}
clrsetbits32(&mipi_tx0->dsi_pll_con0,
RG_DSI0_MPPLL_TXDIV1 | RG_DSI0_MPPLL_TXDIV0 |
RG_DSI0_MPPLL_PREDIV, txdiv1 << 5 | txdiv0 << 3);
/**
* PLL PCW config
* PCW bit 24~30 = integer part of pcw
* PCW bit 0~23 = fractional part of pcw
* pcw = data_Rate*4*txdiv/(Ref_clk*2);
* Post DIV =4, so need data_Rate*4
* Ref_clk is 26MHz
*/
pcw = (u64)(data_rate * (1 << txdiv0) * (1 << txdiv1)) << 24;
pcw /= 13 * MHz;
write32(&mipi_tx0->dsi_pll_con2, pcw);
setbits32(&mipi_tx0->dsi_pll_con1, RG_DSI0_MPPLL_SDM_FRA_EN);
setbits32(&mipi_tx0->dsi_clock_lane, LDOOUT_EN);
for (i = 0; i < lanes; i++)
setbits32(&mipi_tx0->dsi_data_lane[i], LDOOUT_EN);
setbits32(&mipi_tx0->dsi_pll_con0, RG_DSI0_MPPLL_PLL_EN);
udelay(40);
clrbits32(&mipi_tx0->dsi_pll_con1, RG_DSI0_MPPLL_SDM_SSC_EN);
clrbits32(&mipi_tx0->dsi_top_con, RG_DSI_PAD_TIE_LOW_EN);
}
void mtk_dsi_reset(void)
{
setbits32(&dsi0->dsi_con_ctrl, 3);
clrbits32(&dsi0->dsi_con_ctrl, 1);
}
void mtk_dsi_override_phy_timing(struct mtk_phy_timing *timing)
{
int lpx = 5;
timing->lpx = lpx;
timing->da_hs_prepare = 6;
timing->da_hs_zero = 10;
timing->da_hs_trail = 8;
timing->ta_go = 4 * lpx;
timing->ta_sure = 3 * lpx / 2;
timing->ta_get = 5 * lpx;
timing->da_hs_exit = 7;
timing->da_hs_sync = 0;
timing->clk_hs_exit = 2 * lpx;
timing->d_phy = 12;
}
void mtk_dsi_pin_drv_ctrl(void)
{
struct stopwatch sw;
uint32_t pwr_ack;
setbits32(&lvds_tx1->vopll_ctl3, RG_DA_LVDSTX_PWR_ON);
stopwatch_init_usecs_expire(&sw, 1000);
do {
if (stopwatch_expired(&sw)) {
printk(BIOS_ERR, "enable lvdstx_power failed!!!\n");
return;
}
pwr_ack = read32(&lvds_tx1->vopll_ctl3) & RG_AD_LVDSTX_PWR_ACK;
} while (pwr_ack == 0);
clrbits32(&lvds_tx1->vopll_ctl3, RG_DA_LVDS_ISO_EN);
}
|
