1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <soc/gpio.h>
#include <soc/power.h>
#include <soc/sysreg.h>
#include <soc/usb.h>
static void reset_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
{
setbits32(&dwc3->ctl, 0x1 << 11); /* core soft reset */
setbits32(&dwc3->usb3pipectl, 0x1 << 31); /* PHY soft reset */
setbits32(&dwc3->usb2phycfg, 0x1 << 31); /* PHY soft reset */
}
void reset_usb_drd_dwc3()
{
printk(BIOS_DEBUG, "Starting DWC3 reset for USB DRD\n");
reset_dwc3(exynos_usb_drd_dwc3);
}
static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
{
if (!(dwc3->ctl & 0x1 << 11) ||
!(dwc3->usb3pipectl & 0x1 << 31) ||
!(dwc3->usb2phycfg & 0x1 << 31)) {
printk(BIOS_ERR, "DWC3 at %p not in reset (you need to call "
"reset_usb_drd_dwc3() first)!\n", dwc3);
}
/* Set relevant registers to default values (clearing all reset bits) */
write32(&dwc3->usb3pipectl,
0x1 << 24 | /* activate PHY low power states */
0x4 << 19 | /* low power delay value */
0x1 << 18 | /* activate PHY low power delay */
0x1 << 17 | /* enable SuperSpeed PHY suspend */
0x1 << 1); /* default Tx deemphasis value */
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
write32(&dwc3->usb2phycfg,
0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
0x1 << 8 | /* enable PHY sleep in L1 */
0x1 << 6); /* enable PHY suspend */
write32(&dwc3->ctl,
0x5dc << 19 | /* suspend clock scale for 24MHz */
0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
0x1 << 12); /* port capability HOST */
}
void setup_usb_drd_dwc3()
{
setup_dwc3(exynos_usb_drd_dwc3);
printk(BIOS_DEBUG, "DWC3 setup for USB DRD finished\n");
}
static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
{
/* Set all PHY registers to default values */
/* XHCI Version 1.0, Frame Length adjustment 30 MHz */
setbits32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
write32(&phy->utmi, 1 << 6);
write32(&phy->clkrst,
0x88 << 23 | /* spread spectrum refclk selector */
0x1 << 20 | /* enable spread spectrum */
0x1 << 19 | /* enable prescaler refclk */
0x68 << 11 | /* multiplier for 24MHz refclk */
0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
0x1 << 4 | /* power supply in normal operating mode */
0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
0x1 << 1 | /* force port reset */
0x1 << 0); /* normal operating mode */
write32(&phy->param0,
0x9 << 26 | /* LOS level */
0x3 << 22 | /* TX VREF tune */
0x1 << 20 | /* TX rise tune */
0x1 << 18 | /* TX res tune */
0x3 << 13 | /* TX HS X Vtune */
0x3 << 9 | /* TX FS/LS tune */
0x3 << 6 | /* SQRX tune */
0x4 << 3 | /* OTG tune */
0x4 << 0); /* comp disc tune */
write32(&phy->param1,
0x7f << 19 | /* reserved */
0x7f << 12 | /* Tx launch amplitude */
0x20 << 6 | /* Tx deemphasis 6dB */
0x1c << 0); /* Tx deemphasis 3.5dB (value from U-Boot) */
/* disable all test features */
write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
write32(&phy->resume, 0x0);
udelay(10);
clrbits32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
}
void setup_usb_drd_phy()
{
printk(BIOS_DEBUG, "Powering up USB DRD PHY\n");
setbits32(&exynos_power->usb_drd_phy_ctrl, POWER_USB_PHY_CTRL_EN);
setup_drd_phy(exynos_usb_drd_phy);
}
void setup_usb_host_phy(int hsic_gpio)
{
unsigned int hostphy_ctrl0;
setbits32(&exynos_sysreg->usb20_phy_cfg, USB20_PHY_CFG_EN);
setbits32(&exynos_power->usb_host_phy_ctrl, POWER_USB_PHY_CTRL_EN);
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
hostphy_ctrl0 |= (/* Setting up the ref freq */
CLK_24MHZ << 16 |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits32(&exynos_usb_host_phy->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 |
EHCICTRL_ENAINCR16);
/* HSIC USB Hub initialization. */
if (hsic_gpio) {
gpio_direction_output(hsic_gpio, 0);
udelay(100);
gpio_direction_output(hsic_gpio, 1);
udelay(5000);
clrbits32(&exynos_usb_host_phy->hsicphyctrl1,
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESLEEP |
HOST_CTRL0_FORCESUSPEND);
setbits32(&exynos_usb_host_phy->hsicphyctrl1,
HOST_CTRL0_PHYSWRST);
udelay(10);
clrbits32(&exynos_usb_host_phy->hsicphyctrl1,
HOST_CTRL0_PHYSWRST);
}
/* At this point we need to wait for 50ms before talking to
* the USB controller (PHY clock and power setup time)
* By the time we are actually in the payload, these 50ms
* will have passed.
*/
}
|
