1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/device.h>
/* warning: Porting.h includes an open #pragma pack(1) */
#include <Porting.h>
#include <AGESA.h>
#include <amdlib.h>
#include <northbridge/amd/pi/dimmSpd.h>
/*-----------------------------------------------------------------------------
*
* readSmbusByteData - read a single SPD byte from any offset
*/
static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
{
unsigned int status;
UINT64 limit;
address |= 1; // set read bit
__outbyte (iobase + 0, 0xFF); // clear error status
__outbyte (iobase + 1, 0x1F); // clear error status
__outbyte (iobase + 3, offset); // offset in eeprom
__outbyte (iobase + 4, address); // slave address and read bit
__outbyte (iobase + 2, 0x48); // read byte command
// time limit to avoid hanging for unexpected error status (should never happen)
limit = __rdtsc () + 2000000000 / 10;
for (;;)
{
status = __inbyte (iobase);
if (__rdtsc () > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte (iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
/*-----------------------------------------------------------------------------
*
* readSmbusByte - read a single SPD byte from the default offset
* this function is faster function readSmbusByteData
*/
static int readSmbusByte (int iobase, int address, char *buffer)
{
unsigned int status;
UINT64 limit;
__outbyte (iobase + 0, 0xFF); // clear error status
__outbyte (iobase + 2, 0x44); // read command
// time limit to avoid hanging for unexpected error status
limit = __rdtsc () + 2000000000 / 10;
for (;;)
{
status = __inbyte (iobase);
if (__rdtsc () > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte (iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
/*---------------------------------------------------------------------------
*
* readspd - Read one or more SPD bytes from a DIMM.
* Start with offset zero and read sequentially.
* Optimization relies on autoincrement to avoid
* sending offset for every byte.
* Reads 128 bytes in 7-8 ms at 400 KHz.
*/
static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
{
int index, error;
printk(BIOS_SPEW, "-------------READING SPD-----------\n");
printk(BIOS_SPEW, "iobase: 0x%08X, SmbusSlave: 0x%08X, count: %d\n",
iobase, SmbusSlaveAddress, count);
/* read the first byte using offset zero */
error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
}
/* read the remaining bytes using auto-increment for speed */
for (index = 1; index < count; index++)
{
error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
}
}
printk(BIOS_SPEW, "\n");
printk(BIOS_SPEW, "-------------FINISHED READING SPD-----------\n");
return 0;
}
static void setupFch (int ioBase)
{
pm_write16(0x2c, ioBase | 1);
__outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
}
int hudson_readSpd(int spdAddress, char *buf, size_t len)
{
int ioBase = 0xB00;
setupFch (ioBase);
return readspd (ioBase, spdAddress, buf, len);
}
|
