path: root/src/southbridge/intel/fsp_rangeley/lpc.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008-2009 coresystems GmbH
 * Copyright (C) 2013 Sage Electronic Engineering, LLC.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; version 2 of
 * the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <arch/ioapic.h>
#include <arch/acpi.h>
#include <arch/cpu.h>
#include <elog.h>
#include <string.h>
#include <cbmem.h>
#include <arch/acpigen.h>
#include "soc.h"
#include "irq.h"
#include "nvs.h"

#define NMI_OFF	0

typedef struct southbridge_intel_fsp_rangeley_config config_t;

static void soc_enable_apic(struct device *dev)
{
	int i;
	u32 reg32;
	volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
	volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
	u8 *ilb_base = (u8 *)(pci_read_config32(dev, IBASE) & ~0x0f);

	/*
	 * Enable ACPI I/O and power management.
	 * Set SCI IRQ to IRQ9
	 */
	write32(ilb_base + ILB_OIC, 0x100);  /* AEN */
	reg32 = read32(ilb_base + ILB_OIC);  /* Read back per BWG */
	write32(ilb_base + ILB_ACTL, 0);  /* ACTL bit 2:0 SCIS IRQ9 */

	*ioapic_index = 0;
	*ioapic_data = (1 << 25);

	/* Affirm full set of redirection table entries ("write once") */
	*ioapic_index = 1;
	reg32 = *ioapic_data;
	*ioapic_index = 1;
	*ioapic_data = reg32;

	*ioapic_index = 0;
	reg32 = *ioapic_data;
	printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
	if (reg32 != (1 << 25))
		die("APIC Error\n");

	printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
	for (i=0; i<3; i++) {
		*ioapic_index = i;
		printk(BIOS_SPEW, "  reg 0x%04x:", i);
		reg32 = *ioapic_data;
		printk(BIOS_SPEW, " 0x%08x\n", reg32);
	}

	*ioapic_index = 3; /* Select Boot Configuration register. */
	*ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
}

static void soc_enable_serial_irqs(struct device *dev)
{
	u8 *ibase;

	ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);

	/* Set packet length and toggle silent mode bit for one frame. */
	write8(ibase + ILB_SERIRQ_CNTL, (1 << 7));

#if !CONFIG(SERIRQ_CONTINUOUS_MODE)
	write8(ibase + ILB_SERIRQ_CNTL, 0);
#endif
}

/*
 * Write PCI config space IRQ assignments.  PCI devices have the INT_LINE
 * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing
 * information to operating systems and drivers.  The INT_PIN register is
 * generally read only and reports which interrupt pin A - D it uses.  The
 * INT_LINE register is configurable and reports which IRQ (generally the
 * PIC IRQs 1 - 15) it will use.  This needs to take interrupt pin swizzling
 * on devices that are downstream on a PCI bridge into account.
 *
 * This function will loop through all enabled PCI devices and program the
 * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it
 * uses.  It then configures each interrupt in the pic to be level triggered.
 */
static void write_pci_config_irqs(void)
{
	struct device *irq_dev;
	struct device *targ_dev;
	uint8_t int_line = 0;
	uint8_t original_int_pin = 0;
	uint8_t new_int_pin = 0;
	uint16_t current_bdf = 0;
	uint16_t parent_bdf = 0;
	uint8_t pirq = 0;
	uint8_t device_num = 0;
	const struct rangeley_irq_route *ir = &global_rangeley_irq_route;

	if (ir == NULL) {
		printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because"
				" 'global_rangeley_irq_route' structure does not exist\n");
		return;
	}

	/*
	 * Loop through all enabled devices and program their
	 * INT_LINE, INT_PIN registers from values taken from
	 * the Interrupt Route registers in the ILB
	 */
	printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n");
	for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {

		if ((irq_dev->path.type != DEVICE_PATH_PCI) ||
			(!irq_dev->enabled))
			continue;

		current_bdf = irq_dev->path.pci.devfn |
			irq_dev->bus->secondary << 8;

		/*
		 * Step 1: Get the INT_PIN and device structure to look for
		 * in the pirq_data table defined in the mainboard directory.
		 */
		targ_dev = NULL;
		new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev);
		if (targ_dev == NULL || new_int_pin < 1)
			continue;

		/* Get the original INT_PIN for record keeping */
		original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);

		parent_bdf = targ_dev->path.pci.devfn
			| targ_dev->bus->secondary << 8;
		device_num = PCI_SLOT(parent_bdf);

		if (ir->pcidev[device_num] == 0) {
			printk(BIOS_WARNING,
				"Warning: PCI Device %d does not have an IRQ entry, skipping it\n",
				device_num);
			continue;
		}

		/* Find the PIRQ that is attached to the INT_PIN this device uses */
		pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF;

		/* Get the INT_LINE this device/function will use */
		int_line = ir->pic[pirq];

		if (int_line != PIRQ_PIC_IRQDISABLE) {
			/* Set this IRQ to level triggered since it is used by a PCI device */
			i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED);
			/* Set the Interrupt Line register in PCI config space */
			pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
		} else {
			/* Set the Interrupt line register as "unknown or unused" */
			pci_write_config8(irq_dev, PCI_INTERRUPT_LINE,
				PIRQ_PIC_UNKNOWN_UNUSED);
		}

		printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n",
			original_int_pin, pin_to_str(original_int_pin));
		if (parent_bdf != current_bdf)
			printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n",
							new_int_pin, pin_to_str(new_int_pin));
		printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n"
						"\tINT_LINE\t: 0x%X (IRQ %d)\n",
						'A' + pirq, int_line, int_line);
	}
	printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
}

static void soc_pirq_init(struct device *dev)
{
	int i, j;
	int pirq;
	u8 *ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);
	u8 *pr_base = ibase + 0x08;
	u16 *ir_base = (u16 *)(ibase + 0x20);
	u32 *actl = (u32 *)ibase;
	const struct rangeley_irq_route *ir = &global_rangeley_irq_route;

	/* Set up the PIRQ PIC routing based on static config. */
	printk(BIOS_SPEW, "Start writing IRQ assignments\n"
			"PIRQ\tA\tB\tC\tD\tE\tF\tG\tH\n"
			"IRQ ");
	for (i = 0; i < NUM_PIRQS; i++) {
		write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]);
		printk(BIOS_SPEW, "\t%d", ir->pic[i]);
	}
	printk(BIOS_SPEW, "\n\n");

	/* Set up the per device PIRQ routing based on static config. */
	printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n"
			"Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n");
	for (i = 0; i < NUM_OF_PCI_DEVS; i++) {
		write16(ir_base + i, ir->pcidev[i]);

		/* If the entry is more than just 0, print it out */
		if (ir->pcidev[i]) {
			printk(BIOS_SPEW, " %d: ", i);
			for (j = 0; j < 4; j++) {
				pirq = (ir->pcidev[i] >> (j * 4)) & 0xF;
				printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]);
			}
			printk(BIOS_SPEW, "\n");
		}
	}

	/* Route SCI to IRQ9 */
	write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9);
	printk(BIOS_SPEW, "Finished writing IRQ assignments\n");

	/* Write IRQ assignments to PCI config space */
	write_pci_config_irqs();
}

static void soc_power_options(struct device *dev)
{
	u8 reg8;
	u16 pmbase;
	u32 reg32;

	/* Get the chip configuration */
	config_t *config = dev->chip_info;

	int nmi_option;

	/* Set up NMI on errors. */
	reg8 = inb(0x61);
	reg8 &= 0x0f;		/* Higher Nibble must be 0 */
	reg8 &= ~(1 << 3);	/* IOCHK# NMI Enable */
	// reg8 &= ~(1 << 2);	/* PCI SERR# Enable */
	reg8 |= (1 << 2); /* PCI SERR# Disable for now */
	outb(reg8, 0x61);

	reg8 = inb(0x70);
	nmi_option = NMI_OFF;
	get_option(&nmi_option, "nmi");
	if (nmi_option) {
		printk(BIOS_INFO, "NMI sources enabled.\n");
		reg8 &= ~(1 << 7);	/* Set NMI. */
	} else {
		printk(BIOS_INFO, "NMI sources disabled.\n");
		reg8 |= (1 << 7);	/* Can't mask NMI from PCI-E and NMI_NOW */
	}
	outb(reg8, 0x70);

	pmbase = pci_read_config16(dev, ABASE) & ~0xf;

	outl(config->gpe0_en, pmbase + GPE0_EN);
	outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);

	/* Set up power management block and determine sleep mode */
	reg32 = inl(pmbase + PM1_CNT); // PM1_CNT
	reg32 &= ~(7 << 10);	// SLP_TYP
	reg32 |= (1 << 0);	// SCI_EN
	outl(reg32, pmbase + PM1_CNT);
}

/* Disable the HPET, Clear the counter, and re-enable it. */
static void enable_hpet(void)
{
	write8((u8 *)HPET_GCFG, 0x00);
	write32((u32 *)HPET_MCV, 0x00000000);
	write32((u32 *)(HPET_MCV + 0x04), 0x00000000);
	write8((u8 *)HPET_GCFG, 0x01);
}

static void soc_disable_smm_only_flashing(struct device *dev)
{
	u8 reg8;

	printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... ");
	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
	reg8 &= ~(1 << 5);
	pci_write_config8(dev, 0xdc, reg8);
}

static void lpc_init(struct device *dev)
{
	printk(BIOS_DEBUG, "soc: lpc_init\n");

	/* Set the value for PCI command register. */
	pci_write_config16(dev, PCI_COMMAND, 0x000f);

	/* IO APIC initialization. */
	soc_enable_apic(dev);

	soc_enable_serial_irqs(dev);

	/* Setup the PIRQ. */
	soc_pirq_init(dev);

	/* Setup power options. */
	soc_power_options(dev);

	/* Initialize power management */
	switch (soc_silicon_type()) {
	case SOC_TYPE_RANGELEY:
		break;
	default:
		printk(BIOS_DEBUG, "Unknown Chipset: 0x%04x\n", dev->device);
	}

	/* Initialize ISA DMA. */
	isa_dma_init();

	/* Initialize the High Precision Event Timers, if present. */
	enable_hpet();

	setup_i8259();

	/* Interrupt 9 should be level triggered (SCI) */
	i8259_configure_irq_trigger(9, 1);

	soc_disable_smm_only_flashing(dev);
}

static void soc_lpc_read_resources(struct device *dev)
{
	struct resource *res;
	config_t *config = dev->chip_info;
	u8 io_index = 0;

	/* Get the normal PCI resources of this device. */
	pci_dev_read_resources(dev);

	/* Add an extra subtractive resource for both memory and I/O. */
	res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
	res->base = 0;
	res->size = 0x1000;
	res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
	res->base = 0xff800000;
	res->size = 0x00800000; /* 8 MB for flash */
	res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	res = new_resource(dev, 3); /* IOAPIC */
	res->base = IO_APIC_ADDR;
	res->size = 0x00001000;
	res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	/* Set SOC IO decode ranges if required.*/
	if ((config->gen1_dec & 0xFFFC) > 0x1000) {
		res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
		res->base = config->gen1_dec & 0xFFFC;
		res->size = (config->gen1_dec >> 16) & 0xFC;
		res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
				 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
	}

	if ((config->gen2_dec & 0xFFFC) > 0x1000) {
		res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
		res->base = config->gen2_dec & 0xFFFC;
		res->size = (config->gen2_dec >> 16) & 0xFC;
		res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
				 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
	}

	if ((config->gen3_dec & 0xFFFC) > 0x1000) {
		res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
		res->base = config->gen3_dec & 0xFFFC;
		res->size = (config->gen3_dec >> 16) & 0xFC;
		res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
				 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
	}

	if ((config->gen4_dec & 0xFFFC) > 0x1000) {
		res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
		res->base = config->gen4_dec & 0xFFFC;
		res->size = (config->gen4_dec >> 16) & 0xFC;
		res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE |
				 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
	}
}

static void soc_lpc_enable_resources(struct device *dev)
{
	return pci_dev_enable_resources(dev);
}

static void soc_lpc_enable(struct device *dev)
{
	soc_enable(dev);
}

static void southbridge_inject_dsdt(struct device *dev)
{
	global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof(*gnvs));

	if (gnvs) {
		memset(gnvs, 0, sizeof(*gnvs));
		acpi_create_gnvs(gnvs);

		/* And tell SMI about it */
		if (CONFIG(HAVE_SMI_HANDLER))
			smm_setup_structures(gnvs, NULL, NULL);

		/* Add it to DSDT.  */
		acpigen_write_scope("\\");
		acpigen_write_name_dword("NVSA", (u32) gnvs);
		acpigen_pop_len();
	}
}

static struct pci_operations pci_ops = {
	.set_subsystem = pci_dev_set_subsystem,
};

static struct device_operations device_ops = {
	.read_resources		= soc_lpc_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= soc_lpc_enable_resources,
	.init			= lpc_init,
	.write_acpi_tables      = acpi_write_hpet,
	.acpi_inject_dsdt_generator = southbridge_inject_dsdt,
	.enable			= soc_lpc_enable,
	.scan_bus		= scan_lpc_bus,
	.ops_pci		= &pci_ops,
};

/* IDs for LPC device of Intel 89xx Series Chipset */
static const unsigned short pci_device_ids[] = { 0x1F38, 0x1F39, 0x1F3A, 0x1F3B,
                                                 0 };

static const struct pci_driver soc_lpc __pci_driver = {
	.ops	 = &device_ops,
	.vendor	 = PCI_VENDOR_ID_INTEL,
	.devices = pci_device_ids,
};