diff options
| author | Brit Chesley <brit.chesley@amd.com> | 2024-04-29 15:32:58 -0500 |
|---|---|---|
| committer | mergify[bot] <37929162+mergify[bot]@users.noreply.github.com> | 2024-05-08 04:43:58 +0000 |
| commit | efc7ccf9060e69a680dfa36111131a0951d983d3 (patch) | |
| tree | cacbb74a807fe606cc2944cf1f9b71100177076d | |
| parent | fa7fdb89a3c55a5ea1c346b5ac43cae567c210ca (diff) | |
| download | edk2-efc7ccf9060e69a680dfa36111131a0951d983d3.tar.gz edk2-efc7ccf9060e69a680dfa36111131a0951d983d3.tar.bz2 edk2-efc7ccf9060e69a680dfa36111131a0951d983d3.zip | |
MdeModulePkg/Bus/Spi/SpiBus: Adding SpiBus Drivers
Added SpiBus DXE and SMM drivers. This code translates SPI requests from
the application layer into SPI Bus transactions on the SPI host
controller. The code is responsible for checking if the transaction is
valid, then setting up the SPI clock and chip select properly before
passing the bus transaction to the host controller.
Platform Initialization Spec 1.7 volume 5 section 18.1.6
Bugzilla #4753
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBus.c | 433 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBus.h | 167 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBus.uni | 10 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.c | 198 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.inf | 41 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.c | 162 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.inf | 41 |
7 files changed, 1052 insertions, 0 deletions
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.c b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.c new file mode 100644 index 0000000000..b183ca182c --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.c @@ -0,0 +1,433 @@ +/** @file
+
+ SpiBus driver
+
+ Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Protocol/SpiConfiguration.h>
+#include <Protocol/SpiHc.h>
+#include <Protocol/SpiIo.h>
+#include "SpiBus.h"
+
+/**
+ Checks if two device paths are the same.
+
+ @param[in] DevicePath1 First device path to compare
+ @param[in] DevicePath2 Second device path to compare
+
+ @retval TRUE The device paths share the same nodes and values
+ @retval FALSE The device paths differ
+**/
+BOOLEAN
+EFIAPI
+DevicePathsAreEqual (
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath1,
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath2
+ )
+{
+ UINTN Size1;
+ UINTN Size2;
+
+ Size1 = GetDevicePathSize (DevicePath1);
+ Size2 = GetDevicePathSize (DevicePath2);
+
+ if (Size1 != Size2) {
+ return FALSE;
+ }
+
+ if (CompareMem (DevicePath1, DevicePath2, Size1) != 0) {
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+/**
+ Calls the SpiPeripherals ChipSelect if it is not null, otherwise
+ calls the Host Controllers ChipSelect function.
+
+ @param[in] SpiChip The SpiChip to place on the bus via asserting its chip select
+ @param[in] PinValue Value to place on the chip select pin
+
+ @retval EFI_SUCCESS Chip select pin was placed at requested level
+ @retval EFI_INVALID_PARAMETER Invalid parameters passed into ChipSelect function
+**/
+EFI_STATUS
+EFIAPI
+SpiChipSelect (
+ IN CONST SPI_IO_CHIP *SpiChip,
+ IN BOOLEAN PinValue
+ )
+{
+ EFI_STATUS Status;
+
+ // Check which chip select function to use
+ if (SpiChip->Protocol.SpiPeripheral->ChipSelect != NULL) {
+ Status = SpiChip->Protocol.SpiPeripheral->ChipSelect (
+ SpiChip->BusTransaction.SpiPeripheral,
+ PinValue
+ );
+ } else {
+ Status = SpiChip->SpiHc->ChipSelect (
+ SpiChip->SpiHc,
+ SpiChip->BusTransaction.SpiPeripheral,
+ PinValue
+ );
+ }
+
+ return Status;
+}
+
+/**
+ Checks the SpiChip's BusTransaction attributes to ensure its a valid SPI transaction.
+
+ @param[in] SpiChip The SpiChip where a bus transaction is requested
+
+ @retval EFI_SUCCESS This is a valid SPI bus transaction
+ @retval EFI_BAD_BUFFER_SIZE The WriteBytes value was invalid
+ @retval EFI_BAD_BUFFER_SIZE The ReadBytes value was invalid
+ @retval EFI_INVALID_PARAMETER TransactionType is not valid,
+ or BusWidth not supported by SPI peripheral or
+ SPI host controller,
+ or WriteBytes non-zero and WriteBuffer is
+ NULL,
+ or ReadBytes non-zero and ReadBuffer is NULL,
+ or ReadBuffer != WriteBuffer for full-duplex
+ type,
+ or WriteBuffer was NULL,
+ or TPL is too high
+ @retval EFI_OUT_OF_RESOURCES Insufficient memory for SPI transaction
+ @retval EFI_UNSUPPORTED The FrameSize is not supported by the SPI bus
+ layer or the SPI host controller
+ @retval EFI_UNSUPPORTED The SPI controller was not able to support
+**/
+EFI_STATUS
+EFIAPI
+IsValidSpiTransaction (
+ IN SPI_IO_CHIP *SpiChip
+ )
+{
+ // Error checking
+ if (SpiChip->BusTransaction.TransactionType > SPI_TRANSACTION_WRITE_THEN_READ) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((SpiChip->BusTransaction.BusWidth != 1) && (SpiChip->BusTransaction.BusWidth != 2) && (SpiChip->BusTransaction.BusWidth != 4) &&
+ (SpiChip->BusTransaction.BusWidth != 8)) || (SpiChip->BusTransaction.FrameSize == 0))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((SpiChip->BusTransaction.BusWidth == 8) && (((SpiChip->Protocol.Attributes & SPI_IO_SUPPORTS_8_BIT_DATA_BUS_WIDTH) != SPI_IO_SUPPORTS_8_BIT_DATA_BUS_WIDTH) ||
+ ((SpiChip->BusTransaction.SpiPeripheral->Attributes & SPI_PART_SUPPORTS_8_BIT_DATA_BUS_WIDTH) != SPI_PART_SUPPORTS_8_BIT_DATA_BUS_WIDTH)))
+ {
+ return EFI_INVALID_PARAMETER;
+ } else if ((SpiChip->BusTransaction.BusWidth == 4) && (((SpiChip->Protocol.Attributes & SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH) ||
+ ((SpiChip->BusTransaction.SpiPeripheral->Attributes & SPI_PART_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != SPI_PART_SUPPORTS_4_BIT_DATA_BUS_WIDTH)))
+ {
+ return EFI_INVALID_PARAMETER;
+ } else if ((SpiChip->BusTransaction.BusWidth == 2) && (((SpiChip->Protocol.Attributes & SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH) ||
+ ((SpiChip->BusTransaction.SpiPeripheral->Attributes & SPI_PART_SUPPORTS_2_BIT_DATA_BUS_WIDTH) != SPI_PART_SUPPORTS_2_BIT_DATA_BUS_WIDTH)))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((SpiChip->BusTransaction.WriteBytes > 0) && (SpiChip->BusTransaction.WriteBuffer == NULL)) || ((SpiChip->BusTransaction.ReadBytes > 0) && (SpiChip->BusTransaction.ReadBuffer == NULL))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((SpiChip->BusTransaction.TransactionType == SPI_TRANSACTION_FULL_DUPLEX) && (SpiChip->BusTransaction.ReadBytes != SpiChip->BusTransaction.WriteBytes)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check frame size, passed parameter is in bits
+ if ((SpiChip->Protocol.FrameSizeSupportMask & (1<<(SpiChip->BusTransaction.FrameSize-1))) == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initiate a SPI transaction between the host and a SPI peripheral.
+
+ This routine must be called at or below TPL_NOTIFY.
+ This routine works with the SPI bus layer to pass the SPI transaction to the
+ SPI controller for execution on the SPI bus. There are four types of
+ supported transactions supported by this routine:
+ * Full Duplex: WriteBuffer and ReadBuffer are the same size.
+ * Write Only: WriteBuffer contains data for SPI peripheral, ReadBytes = 0
+ * Read Only: ReadBuffer to receive data from SPI peripheral, WriteBytes = 0
+ * Write Then Read: WriteBuffer contains control data to write to SPI
+ peripheral before data is placed into the ReadBuffer.
+ Both WriteBytes and ReadBytes must be non-zero.
+
+ @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structure.
+ @param[in] TransactionType Type of SPI transaction.
+ @param[in] DebugTransaction Set TRUE only when debugging is desired.
+ Debugging may be turned on for a single SPI
+ transaction. Only this transaction will display
+ debugging messages. All other transactions with
+ this value set to FALSE will not display any
+ debugging messages.
+ @param[in] ClockHz Specify the ClockHz value as zero (0) to use
+ the maximum clock frequency supported by the
+ SPI controller and part. Specify a non-zero
+ value only when a specific SPI transaction
+ requires a reduced clock rate.
+ @param[in] BusWidth Width of the SPI bus in bits: 1, 2, 4
+ @param[in] FrameSize Frame size in bits, range: 1 - 32
+ @param[in] WriteBytes The length of the WriteBuffer in bytes.
+ Specify zero for read-only operations.
+ @param[in] WriteBuffer The buffer containing data to be sent from the
+ host to the SPI chip. Specify NULL for read
+ only operations.
+ * Frame sizes 1-8 bits: UINT8 (one byte) per
+ frame
+ * Frame sizes 7-16 bits: UINT16 (two bytes) per
+ frame
+ * Frame sizes 17-32 bits: UINT32 (four bytes)
+ per frame The transmit frame is in the least
+ significant N bits.
+ @param[in] ReadBytes The length of the ReadBuffer in bytes.
+ Specify zero for write-only operations.
+ @param[out] ReadBuffer The buffer to receeive data from the SPI chip
+ during the transaction. Specify NULL for write
+ only operations.
+ * Frame sizes 1-8 bits: UINT8 (one byte) per
+ frame
+ * Frame sizes 7-16 bits: UINT16 (two bytes) per
+ frame
+ * Frame sizes 17-32 bits: UINT32 (four bytes)
+ per frame The received frame is in the least
+ significant N bits.
+
+ @retval EFI_SUCCESS The SPI transaction completed successfully
+ @retval EFI_BAD_BUFFER_SIZE The WriteBytes value was invalid
+ @retval EFI_BAD_BUFFER_SIZE The ReadBytes value was invalid
+ @retval EFI_INVALID_PARAMETER TransactionType is not valid,
+ or BusWidth not supported by SPI peripheral or
+ SPI host controller,
+ or WriteBytes non-zero and WriteBuffer is
+ NULL,
+ or ReadBytes non-zero and ReadBuffer is NULL,
+ or ReadBuffer != WriteBuffer for full-duplex
+ type,
+ or WriteBuffer was NULL,
+ or TPL is too high
+ @retval EFI_OUT_OF_RESOURCES Insufficient memory for SPI transaction
+ @retval EFI_UNSUPPORTED The FrameSize is not supported by the SPI bus
+ layer or the SPI host controller
+ @retval EFI_UNSUPPORTED The SPI controller was not able to support
+
+**/
+EFI_STATUS
+EFIAPI
+Transaction (
+ IN CONST EFI_SPI_IO_PROTOCOL *This,
+ IN EFI_SPI_TRANSACTION_TYPE TransactionType,
+ IN BOOLEAN DebugTransaction,
+ IN UINT32 ClockHz OPTIONAL,
+ IN UINT32 BusWidth,
+ IN UINT32 FrameSize,
+ IN UINT32 WriteBytes,
+ IN UINT8 *WriteBuffer,
+ IN UINT32 ReadBytes,
+ OUT UINT8 *ReadBuffer
+ )
+{
+ EFI_STATUS Status;
+ SPI_IO_CHIP *SpiChip;
+ UINT32 MaxClockHz;
+ UINT8 *DummyReadBuffer;
+ UINT8 *DummyWriteBuffer;
+
+ SpiChip = SPI_IO_CHIP_FROM_THIS (This);
+ SpiChip->BusTransaction.SpiPeripheral =
+ (EFI_SPI_PERIPHERAL *)SpiChip->Protocol.SpiPeripheral;
+ SpiChip->BusTransaction.TransactionType = TransactionType;
+ SpiChip->BusTransaction.DebugTransaction = DebugTransaction;
+ SpiChip->BusTransaction.BusWidth = BusWidth;
+ SpiChip->BusTransaction.FrameSize = FrameSize;
+ SpiChip->BusTransaction.WriteBytes = WriteBytes;
+ SpiChip->BusTransaction.WriteBuffer = WriteBuffer;
+ SpiChip->BusTransaction.ReadBytes = ReadBytes;
+ SpiChip->BusTransaction.ReadBuffer = ReadBuffer;
+
+ // Ensure valid spi transaction parameters
+ Status = IsValidSpiTransaction (SpiChip);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Setup the proper clock frequency
+ if (SpiChip->BusTransaction.SpiPeripheral->MaxClockHz != 0) {
+ MaxClockHz = SpiChip->BusTransaction.SpiPeripheral->MaxClockHz;
+ } else {
+ MaxClockHz = SpiChip->BusTransaction.SpiPeripheral->SpiPart->MaxClockHz;
+ }
+
+ // Call proper clock function
+ if (SpiChip->Protocol.SpiPeripheral->SpiBus->Clock != NULL) {
+ Status = SpiChip->Protocol.SpiPeripheral->SpiBus->Clock (
+ SpiChip->BusTransaction.SpiPeripheral,
+ &MaxClockHz
+ );
+ } else {
+ Status = SpiChip->SpiHc->Clock (
+ SpiChip->SpiHc,
+ SpiChip->BusTransaction.SpiPeripheral,
+ &MaxClockHz
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = SpiChipSelect (SpiChip, SpiChip->BusTransaction.SpiPeripheral->SpiPart->ChipSelectPolarity);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Check transaction types and match to HC capabilities
+ if ((TransactionType == SPI_TRANSACTION_WRITE_ONLY) &&
+ ((SpiChip->SpiHc->Attributes & HC_SUPPORTS_WRITE_ONLY_OPERATIONS) != HC_SUPPORTS_WRITE_ONLY_OPERATIONS))
+ {
+ // Convert to full duplex transaction
+ SpiChip->BusTransaction.ReadBytes = SpiChip->BusTransaction.WriteBytes;
+ SpiChip->BusTransaction.ReadBuffer = AllocateZeroPool (SpiChip->BusTransaction.ReadBytes);
+
+ Status = SpiChip->SpiHc->Transaction (
+ SpiChip->SpiHc,
+ &SpiChip->BusTransaction
+ );
+
+ SpiChip->BusTransaction.ReadBytes = ReadBytes; // assign to passed parameter
+ FreePool (SpiChip->BusTransaction.ReadBuffer); // Free temporary buffer
+ } else if ((TransactionType == SPI_TRANSACTION_READ_ONLY) &&
+ ((SpiChip->SpiHc->Attributes & HC_SUPPORTS_READ_ONLY_OPERATIONS) != HC_SUPPORTS_READ_ONLY_OPERATIONS))
+ {
+ // Convert to full duplex transaction
+ SpiChip->BusTransaction.WriteBytes = SpiChip->BusTransaction.WriteBytes;
+ SpiChip->BusTransaction.WriteBuffer = AllocateZeroPool (SpiChip->BusTransaction.WriteBytes);
+
+ Status = SpiChip->SpiHc->Transaction (
+ SpiChip->SpiHc,
+ &SpiChip->BusTransaction
+ );
+
+ SpiChip->BusTransaction.WriteBytes = WriteBytes;
+ FreePool (SpiChip->BusTransaction.WriteBuffer);
+ } else if ((TransactionType == SPI_TRANSACTION_WRITE_THEN_READ) &&
+ ((SpiChip->SpiHc->Attributes & HC_SUPPORTS_WRITE_THEN_READ_OPERATIONS) != HC_SUPPORTS_WRITE_THEN_READ_OPERATIONS))
+ {
+ // Convert to full duplex transaction
+ DummyReadBuffer = AllocateZeroPool (WriteBytes);
+ DummyWriteBuffer = AllocateZeroPool (ReadBytes);
+ SpiChip->BusTransaction.ReadBuffer = DummyReadBuffer;
+ SpiChip->BusTransaction.ReadBytes = WriteBytes;
+
+ Status = SpiChip->SpiHc->Transaction (
+ SpiChip->SpiHc,
+ &SpiChip->BusTransaction
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Write is done, now need to read, restore passed in read buffer info
+ SpiChip->BusTransaction.ReadBuffer = ReadBuffer;
+ SpiChip->BusTransaction.ReadBytes = ReadBytes;
+
+ SpiChip->BusTransaction.WriteBuffer = DummyWriteBuffer;
+ SpiChip->BusTransaction.WriteBytes = ReadBytes;
+
+ Status = SpiChip->SpiHc->Transaction (
+ SpiChip->SpiHc,
+ &SpiChip->BusTransaction
+ );
+ // Restore write data
+ SpiChip->BusTransaction.WriteBuffer = WriteBuffer;
+ SpiChip->BusTransaction.WriteBytes = WriteBytes;
+
+ FreePool (DummyReadBuffer);
+ FreePool (DummyWriteBuffer);
+ } else {
+ // Supported transaction type, just pass info the SPI HC Protocol Transaction
+ Status = SpiChip->SpiHc->Transaction (
+ SpiChip->SpiHc,
+ &SpiChip->BusTransaction
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = SpiChipSelect (SpiChip, !SpiChip->BusTransaction.SpiPeripheral->SpiPart->ChipSelectPolarity);
+
+ return Status;
+}
+
+/**
+ Update the SPI peripheral associated with this SPI 10 SpiChip.
+
+ Support socketed SPI parts by allowing the SPI peripheral driver to replace
+ the SPI peripheral after the connection is made. An example use is socketed
+ SPI NOR flash parts, where the size and parameters change depending upon
+ device is in the socket.
+
+ @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structure.
+ @param[in] SpiPeripheral Pointer to an EFI_SPI_PERIPHERAL structure.
+
+ @retval EFI_SUCCESS The SPI peripheral was updated successfully
+ @retval EFI_INVALID_PARAMETER The SpiPeripheral value is NULL,
+ or the SpiPeripheral->SpiBus is NULL,
+ or the SpiPeripheral->SpiBus pointing at
+ wrong bus, or the SpiPeripheral->SpiPart is NULL
+**/
+EFI_STATUS
+EFIAPI
+UpdateSpiPeripheral (
+ IN CONST EFI_SPI_IO_PROTOCOL *This,
+ IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral
+ )
+{
+ EFI_STATUS Status;
+ SPI_IO_CHIP *SpiChip;
+
+ DEBUG ((DEBUG_VERBOSE, "%a: SPI Bus - Entry\n", __func__));
+
+ SpiChip = SPI_IO_CHIP_FROM_THIS (This);
+
+ if ((SpiPeripheral == NULL) || (SpiPeripheral->SpiBus == NULL) ||
+ (SpiPeripheral->SpiPart == NULL))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // EFI_INVALID_PARAMETER if SpiPeripheral->SpiBus is pointing at wrong bus
+ if (!DevicePathsAreEqual (SpiPeripheral->SpiBus->ControllerPath, SpiChip->SpiBus->ControllerPath)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ SpiChip->Protocol.OriginalSpiPeripheral = SpiChip->Protocol.SpiPeripheral;
+ SpiChip->Protocol.SpiPeripheral = SpiPeripheral;
+
+ Status = EFI_SUCCESS;
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: SPI Bus - Exit Status=%r\n",
+ __func__,
+ Status
+ ));
+ return Status;
+}
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.h b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.h new file mode 100644 index 0000000000..7a43f66ac7 --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.h @@ -0,0 +1,167 @@ +/** @file
+
+ SPI bus driver
+
+ Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef SPI_BUS_H_
+#define SPI_BUS_H_
+
+#include <PiDxe.h>
+#include <Library/BaseLib.h>
+#include <Protocol/DevicePath.h>
+#include <Library/DevicePathLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Protocol/SpiIo.h>
+#include <Protocol/SpiHc.h>
+#include <Protocol/SpiConfiguration.h>
+
+#define SPI_IO_SIGNATURE SIGNATURE_32 ('s', 'i', 'o', 'c')
+
+typedef struct {
+ UINTN Signature;
+ EFI_HANDLE Handle;
+ EFI_SPI_IO_PROTOCOL Protocol;
+ EFI_SPI_BUS_TRANSACTION BusTransaction;
+ EFI_SPI_CONFIGURATION_PROTOCOL *SpiConfig;
+ EFI_SPI_HC_PROTOCOL *SpiHc;
+ EFI_SPI_BUS *SpiBus;
+} SPI_IO_CHIP;
+
+#define SPI_IO_CHIP_FROM_THIS(a) \
+ CR (a, SPI_IO_CHIP, Protocol, \
+ SPI_IO_SIGNATURE)
+
+/**
+ Checks if two device paths are the same
+
+ @param[in] DevicePath1 First device path to compare
+ @param[in] DevicePath2 Second device path to compare
+
+ @retval TRUE The device paths share the same nodes and values
+ @retval FALSE The device paths differ
+**/
+BOOLEAN
+EFIAPI
+DevicePathsAreEqual (
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath1,
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath2
+ );
+
+/**
+ Initiate a SPI transaction between the host and a SPI peripheral.
+
+ This routine must be called at or below TPL_NOTIFY.
+ This routine works with the SPI bus layer to pass the SPI transaction to the
+ SPI controller for execution on the SPI bus. There are four types of
+ supported transactions supported by this routine:
+ * Full Duplex: WriteBuffer and ReadBuffer are the same size.
+ * Write Only: WriteBuffer contains data for SPI peripheral, ReadBytes = 0
+ * Read Only: ReadBuffer to receive data from SPI peripheral, WriteBytes = 0
+ * Write Then Read: WriteBuffer contains control data to write to SPI
+ peripheral before data is placed into the ReadBuffer.
+ Both WriteBytes and ReadBytes must be non-zero.
+
+ @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structure.
+ @param[in] TransactionType Type of SPI transaction.
+ @param[in] DebugTransaction Set TRUE only when debugging is desired.
+ Debugging may be turned on for a single SPI
+ transaction. Only this transaction will display
+ debugging messages. All other transactions with
+ this value set to FALSE will not display any
+ debugging messages.
+ @param[in] ClockHz Specify the ClockHz value as zero (0) to use
+ the maximum clock frequency supported by the
+ SPI controller and part. Specify a non-zero
+ value only when a specific SPI transaction
+ requires a reduced clock rate.
+ @param[in] BusWidth Width of the SPI bus in bits: 1, 2, 4
+ @param[in] FrameSize Frame size in bits, range: 1 - 32
+ @param[in] WriteBytes The length of the WriteBuffer in bytes.
+ Specify zero for read-only operations.
+ @param[in] WriteBuffer The buffer containing data to be sent from the
+ host to the SPI chip. Specify NULL for read
+ only operations.
+ * Frame sizes 1-8 bits: UINT8 (one byte) per
+ frame
+ * Frame sizes 7-16 bits: UINT16 (two bytes) per
+ frame
+ * Frame sizes 17-32 bits: UINT32 (four bytes)
+ per frame The transmit frame is in the least
+ significant N bits.
+ @param[in] ReadBytes The length of the ReadBuffer in bytes.
+ Specify zero for write-only operations.
+ @param[out] ReadBuffer The buffer to receeive data from the SPI chip
+ during the transaction. Specify NULL for write
+ only operations.
+ * Frame sizes 1-8 bits: UINT8 (one byte) per
+ frame
+ * Frame sizes 7-16 bits: UINT16 (two bytes) per
+ frame
+ * Frame sizes 17-32 bits: UINT32 (four bytes)
+ per frame The received frame is in the least
+ significant N bits.
+
+ @retval EFI_SUCCESS The SPI transaction completed successfully
+ @retval EFI_BAD_BUFFER_SIZE The writeBytes value was invalid
+ @retval EFI_BAD_BUFFER_SIZE The ReadBytes value was invalid
+ @retval EFI_INVALID_PARAMETER TransactionType is not valid,
+ or BusWidth not supported by SPI peripheral or
+ SPI host controller,
+ or WriteBytes non-zero and WriteBuffer is
+ NULL,
+ or ReadBytes non-zero and ReadBuffer is NULL,
+ or ReadBuffer != WriteBuffer for full-duplex
+ type,
+ or WriteBuffer was NULL,
+ or TPL is too high
+ @retval EFI_OUT_OF_RESOURCES Insufficient memory for SPI transaction
+ @retval EFI_UNSUPPORTED The FrameSize is not supported by the SPI bus
+ layer or the SPI host controller
+ @retval EFI_UNSUPPORTED The SPI controller was not able to support
+
+**/
+EFI_STATUS
+EFIAPI
+Transaction (
+ IN CONST EFI_SPI_IO_PROTOCOL *This,
+ IN EFI_SPI_TRANSACTION_TYPE TransactionType,
+ IN BOOLEAN DebugTransaction,
+ IN UINT32 ClockHz OPTIONAL,
+ IN UINT32 BusWidth,
+ IN UINT32 FrameSize,
+ IN UINT32 WriteBytes,
+ IN UINT8 *WriteBuffer,
+ IN UINT32 ReadBytes,
+ OUT UINT8 *ReadBuffer
+ );
+
+/**
+ Update the SPI peripheral associated with this SPI 10 instance.
+
+ Support socketed SPI parts by allowing the SPI peripheral driver to replace
+ the SPI peripheral after the connection is made. An example use is socketed
+ SPI NOR flash parts, where the size and parameters change depending upon
+ device is in the socket.
+
+ @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structure.
+ @param[in] SpiPeripheral Pointer to an EFI_SPI_PERIPHERAL structure.
+
+ @retval EFI_SUCCESS The SPI peripheral was updated successfully
+ @retval EFI_INVALID_PARAMETER The SpiPeripheral value is NULL,
+ or the SpiPeripheral->SpiBus is NULL,
+ or the SpiPeripheral->SpiBus pointing at
+ wrong bus, or the SpiPeripheral->SpiPart is NULL
+
+**/
+EFI_STATUS
+EFIAPI
+UpdateSpiPeripheral (
+ IN CONST EFI_SPI_IO_PROTOCOL *This,
+ IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral
+ );
+
+#endif //SPI_BUS_H_
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.uni b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.uni new file mode 100644 index 0000000000..0d913bdbae --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBus.uni @@ -0,0 +1,10 @@ +// /** @file
+//
+// Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US "SPI Bus driver"
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.c b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.c new file mode 100644 index 0000000000..cd0a2c99a2 --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.c @@ -0,0 +1,198 @@ +/** @file
+
+ SPI bus DXE driver
+
+ Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/SpiConfiguration.h>
+#include <Protocol/SpiHc.h>
+#include <Protocol/SpiIo.h>
+#include "SpiBus.h"
+
+/**
+ Entry point of the Spi Bus layer
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SystemTable Pointer to standard EFI system table.
+
+ @retval EFI_SUCCESS Succeed.
+ @retval EFI_DEVICE_ERROR SpiPeripheral is NULL.
+ @retval EFI_NOT_FOUND Fail to locate SpiHcProtocol or SpiIoConfigurationProtocol
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate SpiIoChip
+**/
+EFI_STATUS
+EFIAPI
+SpiBusEntry (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ SPI_IO_CHIP *SpiChip;
+ EFI_SPI_HC_PROTOCOL *SpiHc;
+ EFI_SPI_CONFIGURATION_PROTOCOL *SpiConfiguration;
+ EFI_SPI_PERIPHERAL *SpiPeripheral;
+ EFI_SPI_BUS *Bus;
+ UINTN BusIndex;
+ UINTN HcIndex;
+ EFI_HANDLE *SpiHcHandles;
+ UINTN HandleCount;
+ EFI_DEVICE_PATH_PROTOCOL *SpiHcDevicePath;
+
+ DEBUG ((DEBUG_VERBOSE, "%a - ENTRY\n", __func__));
+
+ // Get all SPI HC protocols, could be multiple SPI HC's on a single platform
+ Status = gBS->LocateHandleBuffer (
+ ByProtocol,
+ &gEfiSpiHcProtocolGuid,
+ NULL,
+ &HandleCount,
+ &SpiHcHandles
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "No SpiHcProtocol is found\n"));
+ Status = EFI_NOT_FOUND;
+ goto Exit;
+ }
+
+ // Locate the SPI Configuration Protocol
+ Status = gBS->LocateProtocol (
+ &gEfiSpiConfigurationProtocolGuid,
+ NULL,
+ (VOID **)&SpiConfiguration
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "No SpiConfigurationProtocol is found\n"));
+ Status = EFI_NOT_FOUND;
+ goto Exit;
+ }
+
+ // Parse through Hc protocols, find correct device path
+ for (HcIndex = 0; HcIndex < HandleCount; HcIndex++) {
+ Status = gBS->HandleProtocol (
+ SpiHcHandles[HcIndex],
+ &gEfiDevicePathProtocolGuid,
+ (VOID **)&SpiHcDevicePath
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "Error locating EFI device path for this SPI controller, status=%r \n", Status));
+ continue; // Continue searching
+ }
+
+ // Parse through SpiConfiguration's SpiBuses, find matching devicepath for SpiHc
+ for (BusIndex = 0; BusIndex < SpiConfiguration->BusCount; BusIndex++) {
+ Bus = (EFI_SPI_BUS *)SpiConfiguration->Buslist[BusIndex];
+ if (!DevicePathsAreEqual (SpiHcDevicePath, Bus->ControllerPath)) {
+ DEBUG ((DEBUG_VERBOSE, "SpiHc and SpiConfig device paths dont match, continue parsing\n"));
+ continue;
+ }
+
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: Found matching device paths, Enumerating SPI BUS: %s with DevicePath: %s\n",
+ __func__,
+ Bus->FriendlyName,
+ ConvertDevicePathToText (SpiHcDevicePath, FALSE, FALSE)
+ ));
+
+ // Get SpiHc from the SpiHcHandles
+ Status = gBS->HandleProtocol (
+ SpiHcHandles[HcIndex],
+ &gEfiDevicePathProtocolGuid,
+ (VOID **)&SpiHc
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "%a - Error getting SpiHc from Handle\n", __func__));
+ goto Exit;
+ }
+
+ SpiPeripheral = (EFI_SPI_PERIPHERAL *)Bus->Peripherallist;
+ if (SpiPeripheral != NULL) {
+ do {
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: Installing SPI IO protocol for %s, by %s, PN=%s\n",
+ __func__,
+ SpiPeripheral->FriendlyName,
+ SpiPeripheral->SpiPart->Vendor,
+ SpiPeripheral->SpiPart->PartNumber
+ ));
+ // Allocate the SPI IO Device
+ SpiChip = AllocateZeroPool (sizeof (SPI_IO_CHIP));
+ ASSERT (SpiChip != NULL);
+ if (SpiChip != NULL) {
+ // Fill in the SpiChip
+ SpiChip->Signature = SPI_IO_SIGNATURE;
+ SpiChip->SpiConfig = SpiConfiguration;
+ SpiChip->SpiHc = SpiHc;
+ SpiChip->SpiBus = Bus;
+ SpiChip->Protocol.SpiPeripheral = SpiPeripheral;
+ SpiChip->Protocol.OriginalSpiPeripheral = SpiPeripheral;
+ SpiChip->Protocol.FrameSizeSupportMask = SpiHc->FrameSizeSupportMask;
+ SpiChip->Protocol.MaximumTransferBytes = SpiHc->MaximumTransferBytes;
+ if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_ADDRESS) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_ADDRESS;
+ }
+
+ if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_OPCODE) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_OPCODE;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_8_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_8_BIT_DATA_BUS_WIDTH;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_2_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_2_BIT_DATA_BUS_WIDTH;
+ }
+
+ SpiChip->Protocol.Transaction = Transaction;
+ SpiChip->Protocol.UpdateSpiPeripheral = UpdateSpiPeripheral;
+ // Install the SPI IO Protocol
+ Status = gBS->InstallProtocolInterface (
+ &SpiChip->Handle,
+ (GUID *)SpiPeripheral->SpiPeripheralDriverGuid,
+ EFI_NATIVE_INTERFACE,
+ &SpiChip->Protocol
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "%a - Error installing SpiIoProtocol\n", __func__));
+ continue;
+ }
+ } else {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Out of Memory resources\n",
+ __func__
+ ));
+ break;
+ }
+
+ SpiPeripheral = (EFI_SPI_PERIPHERAL *)SpiPeripheral->NextSpiPeripheral;
+ } while (SpiPeripheral != NULL);
+ } else {
+ Status = EFI_DEVICE_ERROR;
+ }
+ }
+ }
+
+Exit:
+ DEBUG ((DEBUG_VERBOSE, "%a - EXIT (Status = %r)\n", __func__, Status));
+ return Status;
+}
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.inf b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.inf new file mode 100644 index 0000000000..3e2cc2daba --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusDxe.inf @@ -0,0 +1,41 @@ +## @file
+# Component description for the SPI BUS DXE module
+#
+# Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+[Defines]
+ INF_VERSION = 1.27
+ BASE_NAME = SpiBusDxe
+ FILE_GUID = 25CE038C-5C3A-4A9B-A111-90DF5897E058
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 0.1
+ PI_SPECIFICATION_VERSION = 0x0001000A
+ ENTRY_POINT = SpiBusEntry
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Sources]
+ SpiBusDxe.c
+ SpiBus.c
+ SpiBus.h
+
+[Protocols]
+ gEfiSpiConfigurationProtocolGuid ## CONSUMES
+ gEfiSpiHcProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiSpiConfigurationProtocolGuid AND
+ gEfiSpiHcProtocolGuid
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ SpiBus.uni
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.c b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.c new file mode 100644 index 0000000000..d9189b9848 --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.c @@ -0,0 +1,162 @@ +/** @file
+
+ SPI bus SMM driver
+
+ Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/MmServicesTableLib.h>
+#include <Protocol/SpiSmmConfiguration.h>
+#include <Protocol/SpiSmmHc.h>
+#include <Protocol/SpiIo.h>
+#include "SpiBus.h"
+
+/**
+ Entry point of the Spi Bus layer
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SystemTable Pointer to standard EFI system table.
+
+ @retval EFI_SUCCESS Succeed.
+ @retval EFI_DEVICE_ERROR Fail to install EFI_SPI_HC_PROTOCOL protocol.
+ @retval EFI_NOT_FOUND fail to locate SpiHcProtocol or SpiIoConfigurationProtocol
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate SpiIoChip
+**/
+EFI_STATUS
+EFIAPI
+SpiBusEntry (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ SPI_IO_CHIP *SpiChip;
+ EFI_SPI_HC_PROTOCOL *SpiHc;
+ EFI_SPI_CONFIGURATION_PROTOCOL *SpiConfiguration;
+ EFI_SPI_PERIPHERAL *SpiPeripheral;
+ EFI_SPI_BUS *Bus;
+
+ DEBUG ((DEBUG_VERBOSE, "%a - ENTRY\n", __func__));
+
+ // Only a single Spi HC protocol in SMM
+ Status = gMmst->MmLocateProtocol (
+ &gEfiSpiSmmHcProtocolGuid,
+ NULL,
+ (VOID **)&SpiHc
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "No SpiHcProtocol is found\n"));
+ Status = EFI_NOT_FOUND;
+ goto Exit;
+ }
+
+ // Locate the SPI Configuration Protocol
+ Status = gMmst->MmLocateProtocol (
+ &gEfiSpiSmmConfigurationProtocolGuid,
+ NULL,
+ (VOID **)&SpiConfiguration
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "No SpiConfigurationProtocol is found\n"));
+ Status = EFI_NOT_FOUND;
+ goto Exit;
+ }
+
+ // Only one SpiBus supported in SMM
+ if (SpiConfiguration->BusCount != 1) {
+ DEBUG ((DEBUG_VERBOSE, "Only one SPI Bus supported in SMM\n"));
+ Status = EFI_UNSUPPORTED;
+ goto Exit;
+ }
+
+ Bus = (EFI_SPI_BUS *)SpiConfiguration->Buslist[0];
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "%a - Error getting SpiHc from Handle\n", __func__));
+ goto Exit;
+ }
+
+ SpiPeripheral = (EFI_SPI_PERIPHERAL *)Bus->Peripherallist;
+ if (SpiPeripheral != NULL) {
+ do {
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: Installing SPI IO protocol for %s, by %s, PN=%s\n",
+ __func__,
+ SpiPeripheral->FriendlyName,
+ SpiPeripheral->SpiPart->Vendor,
+ SpiPeripheral->SpiPart->PartNumber
+ ));
+ // Allocate the SPI IO Device
+ SpiChip = AllocateZeroPool (sizeof (SPI_IO_CHIP));
+ ASSERT (SpiChip != NULL);
+ if (SpiChip != NULL) {
+ // Fill in the SpiChip
+ SpiChip->Signature = SPI_IO_SIGNATURE;
+ SpiChip->SpiConfig = SpiConfiguration;
+ SpiChip->SpiHc = SpiHc;
+ SpiChip->SpiBus = Bus;
+ SpiChip->Protocol.SpiPeripheral = SpiPeripheral;
+ SpiChip->Protocol.OriginalSpiPeripheral = SpiPeripheral;
+ SpiChip->Protocol.FrameSizeSupportMask = SpiHc->FrameSizeSupportMask;
+ SpiChip->Protocol.MaximumTransferBytes = SpiHc->MaximumTransferBytes;
+ if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_ADDRESS) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_ADDRESS;
+ }
+
+ if ((SpiHc->Attributes & HC_TRANSFER_SIZE_INCLUDES_OPCODE) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_TRANSFER_SIZE_INCLUDES_OPCODE;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_8_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_8_BIT_DATA_BUS_WIDTH;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_4_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_4_BIT_DATA_BUS_WIDTH;
+ }
+
+ if ((SpiHc->Attributes & HC_SUPPORTS_2_BIT_DATA_BUS_WIDTH) != 0) {
+ SpiChip->Protocol.Attributes |= SPI_IO_SUPPORTS_2_BIT_DATA_BUS_WIDTH;
+ }
+
+ SpiChip->Protocol.Transaction = Transaction;
+ SpiChip->Protocol.UpdateSpiPeripheral = UpdateSpiPeripheral;
+ // Install the SPI IO Protocol
+ Status = gMmst->MmInstallProtocolInterface (
+ &SpiChip->Handle,
+ (GUID *)SpiPeripheral->SpiPeripheralDriverGuid,
+ EFI_NATIVE_INTERFACE,
+ &SpiChip->Protocol
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_VERBOSE, "%a - Error installing SpiIoProtocol\n", __func__));
+ continue;
+ }
+ } else {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Out of Memory resources\n",
+ __func__
+ ));
+ break;
+ }
+
+ SpiPeripheral = (EFI_SPI_PERIPHERAL *)SpiPeripheral->NextSpiPeripheral;
+ } while (SpiPeripheral != NULL);
+ } else {
+ Status = EFI_DEVICE_ERROR;
+ }
+
+Exit:
+ DEBUG ((DEBUG_VERBOSE, "%a - EXIT (Status = %r)\n", __func__, Status));
+ return Status;
+}
diff --git a/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.inf b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.inf new file mode 100644 index 0000000000..9e3a5aae7d --- /dev/null +++ b/MdeModulePkg/Bus/Spi/SpiBus/SpiBusSmm.inf @@ -0,0 +1,41 @@ +## @file
+# Component description for the SPI BUS SMM module
+#
+# Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+[Defines]
+ INF_VERSION = 1.27
+ BASE_NAME = SpiBusSmm
+ FILE_GUID = 5DBB52E1-3D78-4C9C-A9D7-A43E79E93AC0
+ MODULE_TYPE = DXE_SMM_DRIVER
+ VERSION_STRING = 0.1
+ PI_SPECIFICATION_VERSION = 0x0001000A
+ ENTRY_POINT = SpiBusEntry
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ MmServicesTableLib
+ UefiDriverEntryPoint
+
+[Sources]
+ SpiBus.h
+ SpiBus.c
+ SpiBusSmm.c
+
+[Protocols]
+ gEfiSpiSmmConfigurationProtocolGuid ## CONSUMES
+ gEfiSpiSmmHcProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiSpiSmmConfigurationProtocolGuid AND
+ gEfiSpiSmmHcProtocolGuid
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ SpiBus.uni
|