BaseTools: Delete Bin/{CYGWIN_NT-5.1-i686,Darwin-i386} directories

The Bin/CYGWIN_NT-5.1-i686 and Bin/Darwin-i386 directories contained
files needed for RVCT support.

Since EDK2 no longer supports RVCT, delete those directories.

Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Bob Feng <bob.c.feng@intel.com>

31 files changed, 0 insertions, 691 deletions

diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/BootSectImage b/BaseTools/Bin/CYGWIN_NT-5.1-i686/BootSectImage
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/BootSectImage
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/BuildEnv b/BaseTools/Bin/CYGWIN_NT-5.1-i686/BuildEnv
deleted file mode 100755
index 2cb8b86a99..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/BuildEnv
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-PYTHONPATH="`dirname $0`/../../Source/Python" \
-    python "`dirname $0`/../../Source/Python"/`basename $0`/`basename $0`.py $*
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Ecc b/BaseTools/Bin/CYGWIN_NT-5.1-i686/Ecc
deleted file mode 100755
index 1ba451cf5e..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Ecc
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$cmd/$cmd.py" "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiLdrImage b/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiLdrImage
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiLdrImage
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiRom b/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiRom
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/EfiRom
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenCrc32 b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenCrc32
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenCrc32
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenDepex b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenDepex
deleted file mode 100755
index 1ba451cf5e..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenDepex
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$cmd/$cmd.py" "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFds b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFds
deleted file mode 100755
index 1ba451cf5e..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFds
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$cmd/$cmd.py" "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFfs b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFfs
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFfs
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFv b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFv
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFv
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFw b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFw
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenFw
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenPage b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenPage
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenPage
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenSec b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenSec
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenSec
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenVtf b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenVtf
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GenVtf
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GnuGenBootSector b/BaseTools/Bin/CYGWIN_NT-5.1-i686/GnuGenBootSector
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/GnuGenBootSector
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaCompress b/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaCompress
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaCompress
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaF86Compress b/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaF86Compress
deleted file mode 100755
index c712b131be..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/LzmaF86Compress
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/env bash
-#
-# This script will exec LzmaCompress tool with --f86 option that enables converter for x86 code.
-#
-# Copyright (c) 2012, Intel Corporation. All rights reserved.<BR>
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-
-for arg; do
-  case $arg in
-    -e|-d)
-      set -- "$@" --f86
-      break
-    ;;
-esac
-
-exec LzmaCompress "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunBinToolFromBuildDir b/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunBinToolFromBuildDir
deleted file mode 100755
index 4821d24fa7..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunBinToolFromBuildDir
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-#exec `dirname $0`/../../../../C/bin/`basename $0` $*
-
-TOOL_BASENAME=`basename $0`
-
-if [ -n "$WORKSPACE" -a -e $WORKSPACE/Conf/BaseToolsCBinaries ]
-then
-  exec $WORKSPACE/Conf/BaseToolsCBinaries/$TOOL_BASENAME
-elif [ -n "$WORKSPACE" -a -e $EDK_TOOLS_PATH/Source/C ]
-then
-  if [ ! -e $EDK_TOOLS_PATH/Source/C/bin/$TOOL_BASENAME ]
-  then
-    echo BaseTools C Tool binary was not found \($TOOL_BASENAME\)
-    echo You may need to run:
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec $EDK_TOOLS_PATH/Source/C/bin/$TOOL_BASENAME $*
-  fi
-elif [ -e `dirname $0`/../../Source/C/bin/$TOOL_BASENAME ]
-then
-  exec `dirname $0`/../../Source/C/bin/$TOOL_BASENAME $*
-else
-  echo Unable to find the real \'$TOOL_BASENAME\' to run
-  echo This message was printed by
-  echo "  $0"
-  exit -1
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunToolFromSource b/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunToolFromSource
deleted file mode 100755
index 2cb8b86a99..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/RunToolFromSource
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-PYTHONPATH="`dirname $0`/../../Source/Python" \
-    python "`dirname $0`/../../Source/Python"/`basename $0`/`basename $0`.py $*
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Split b/BaseTools/Bin/CYGWIN_NT-5.1-i686/Split
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Split
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/TargetTool b/BaseTools/Bin/CYGWIN_NT-5.1-i686/TargetTool
deleted file mode 100755
index 1ba451cf5e..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/TargetTool
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$cmd/$cmd.py" "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/TianoCompress b/BaseTools/Bin/CYGWIN_NT-5.1-i686/TianoCompress
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/TianoCompress
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Trim b/BaseTools/Bin/CYGWIN_NT-5.1-i686/Trim
deleted file mode 100755
index b53b79bba4..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/Trim
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-exe=$(basename "$full_cmd")
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$exe/$exe.py" "$@"
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/VfrCompile b/BaseTools/Bin/CYGWIN_NT-5.1-i686/VfrCompile
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/VfrCompile
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/VolInfo b/BaseTools/Bin/CYGWIN_NT-5.1-i686/VolInfo
deleted file mode 100755
index 0945d86d92..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/VolInfo
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-if [ -n "$WORKSPACE" ] && [ -e "$WORKSPACE/Conf/BaseToolsCBinaries" ]
-then
-  exec "$WORKSPACE/Conf/BaseToolsCBinaries/$cmd"
-elif [ -n "$WORKSPACE" ] && [ -e "$EDK_TOOLS_PATH/Source/C" ]
-then
-  if [ ! -e "$EDK_TOOLS_PATH/Source/C/bin/$cmd" ]
-  then
-    echo "BaseTools C Tool binary was not found ($cmd)"
-    echo "You may need to run:"
-    echo "  make -C $EDK_TOOLS_PATH/Source/C"
-  else
-    exec "$EDK_TOOLS_PATH/Source/C/bin/$cmd" "$@"
-  fi
-elif [ -e "$dir/../../Source/C/bin/$cmd" ]
-then
-  exec "$dir/../../Source/C/bin/$cmd" "$@"
-else
-  echo "Unable to find the real '$cmd' to run"
-  echo "This message was printed by"
-  echo "  $0"
-  exit 127
-fi
-
diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/armcc_wrapper.py b/BaseTools/Bin/CYGWIN_NT-5.1-i686/armcc_wrapper.py
deleted file mode 100755
index 3035732d5c..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/armcc_wrapper.py
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/usr/bin/env python

-#

-# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

-#

-# SPDX-License-Identifier: BSD-2-Clause-Patent

-#

-

-#

-# ARMCC tools do not support cygwin paths. Ths script converts cygwin paths to DOS paths

-# in any arguments.

-#

-# armcc_wrapper.py ToolToExec [command line to convert]

-#

-# anything with the / will be converted via cygpath cygwin call or manually.

-# -I/cygpath/c/example is a special case as you can not pass -I to cygpath

-#

-# ExceptionList if a tool takes an argument with a / add it to the exception list

-#

-from __future__ import print_function

-import sys

-import os

-import subprocess

-import pipes

-

-#

-# Convert using cygpath command line tool

-# Currently not used, but just in case we need it in the future

-#

-def ConvertCygPathToDosViacygpath(CygPath):

-  p = subprocess.Popen("cygpath -m " + pipes.quote(CygPath), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, close_fds=True)

-  return p.stdout.read().strip()

-

-#

-#

-#

-def ConvertCygPathToDos(CygPath):

-  if CygPath.find("/cygdrive/") == 0:

-    # convert /cygdrive/c/Xyz to c:/Xyz

-    DosPath = CygPath[10] + ':' + CygPath[11:]

-  else:

-    DosPath = CygPath

-

-  # pipes.quote will add the extra \\ for us.

-  return DosPath.replace('/', '\\')

-

-

-# we receive our options as a list, but we will be passing them to the shell as a line

-# this means we have to requote things as they will get one round of unquoting.

-# we can't set "shell=False" because we are running commands from the PATH and

-# if you don't use the shell you don't get a PATH search.

-def main(argv):

-

-  # use 1st argument as name of tool to call

-  Command = pipes.quote(sys.argv[1]);

-

-  ExceptionList = ["/interwork"]

-

-  for arg in argv:

-    if arg.find('/') == -1:

-      # if we don't need to convert just add to the command line

-      Command = Command + ' ' + pipes.quote(arg)

-    elif arg in ExceptionList:

-      # if it is in the list, then don't do a cygpath

-      # assembler stuff after --apcs has the /.

-      Command = Command + ' ' + pipes.quote(arg)

-    else:

-      if ((arg[0] == '-') and (arg[1] == 'I' or arg[1] == 'i')):

-        CygPath = arg[0] + arg[1] + ConvertCygPathToDos(arg[2:])

-      else:

-        CygPath = ConvertCygPathToDos(arg)

-

-      Command = Command + ' ' + pipes.quote(CygPath)

-

-  # call the real tool with the converted paths

-  return subprocess.call(Command, shell=True)

-

-

-if __name__ == "__main__":

-  try:

-     ret = main(sys.argv[2:])

-

-  except:

-    print("exiting: exception from " + sys.argv[0])

-    ret = 2

-

-  sys.exit(ret)

-

diff --git a/BaseTools/Bin/CYGWIN_NT-5.1-i686/build b/BaseTools/Bin/CYGWIN_NT-5.1-i686/build
deleted file mode 100755
index 1ba451cf5e..0000000000
--- a/BaseTools/Bin/CYGWIN_NT-5.1-i686/build
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-#python `dirname $0`/RunToolFromSource.py `basename $0` $*
-
-# If a ${PYTHON_COMMAND} command is available, use it in preference to python
-if command -v ${PYTHON_COMMAND} >/dev/null 2>&1; then
-    python_exe=${PYTHON_COMMAND}
-fi
-
-full_cmd=${BASH_SOURCE:-$0} # see http://mywiki.wooledge.org/BashFAQ/028 for a discussion of why $0 is not a good choice here
-dir=$(dirname "$full_cmd")
-cmd=${full_cmd##*/}
-
-export PYTHONPATH="$dir/../../Source/Python"
-exec "${python_exe:-python}" "$dir/../../Source/Python/$cmd/$cmd.py" "$@"
diff --git a/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE31/CompilerIntrinsicsLib.lib b/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE31/CompilerIntrinsicsLib.lib
deleted file mode 100644
index 79964fe1b6..0000000000
--- a/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE31/CompilerIntrinsicsLib.lib
+++ /dev/null
diff --git a/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE32/CompilerIntrinsicsLib.lib b/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE32/CompilerIntrinsicsLib.lib
deleted file mode 100644
index 79964fe1b6..0000000000
--- a/BaseTools/Bin/Darwin-i386/Arm/DEBUG_XCODE32/CompilerIntrinsicsLib.lib
+++ /dev/null
diff --git a/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE31/CompilerIntrinsicsLib.lib b/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE31/CompilerIntrinsicsLib.lib
deleted file mode 100644
index c82c915b8e..0000000000
--- a/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE31/CompilerIntrinsicsLib.lib
+++ /dev/null
diff --git a/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE32/CompilerIntrinsicsLib.lib b/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE32/CompilerIntrinsicsLib.lib
deleted file mode 100644
index c82c915b8e..0000000000
--- a/BaseTools/Bin/Darwin-i386/Arm/RELEASE_XCODE32/CompilerIntrinsicsLib.lib
+++ /dev/null