Vlv2TbltDevicePkg/Feature/Capsule: Add FmpDeviceLib instances

Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guo Mang <mang.guo@intel.com>

4 files changed, 1150 insertions, 0 deletions

diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c
new file mode 100644
index 0000000000..6725632664
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c
@@ -0,0 +1,607 @@
+/**

+

+Copyright (c) 2016, Microsoft Corporation

+

+All rights reserved.

+Redistribution and use in source and binary forms, with or without

+modification, are permitted provided that the following conditions are met:

+1. Redistributions of source code must retain the above copyright notice,

+this list of conditions and the following disclaimer.

+2. Redistributions in binary form must reproduce the above copyright notice,

+this list of conditions and the following disclaimer in the documentation

+ and/or other materials provided with the distribution.

+

+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+

+**/

+

+#include <PiDxe.h>

+

+#include <Library/FmpDeviceLib.h>

+

+#include <Library/DebugLib.h>

+#include <Library/BaseLib.h>

+#include <Library/BaseMemoryLib.h>

+#include <Library/MemoryAllocationLib.h>

+#include <Library/UefiBootServicesTableLib.h>

+

+#include <Library/PlatformFlashAccessLib.h>

+

+//#include <Protocol/FirmwareManagement.h>

+

+//#include <Guid/SystemResourceTable.h>

+

+typedef struct {

+  PLATFORM_FIRMWARE_TYPE          FirmwareType;

+  FLASH_ADDRESS_TYPE              AddressType;

+  EFI_PHYSICAL_ADDRESS            BaseAddress;

+  UINTN                           Length;

+  UINTN                           ImageOffset;

+} UPDATE_CONFIG_DATA;

+

+UPDATE_CONFIG_DATA mUpdateConfigData[] = {

+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00000000, 0x00040000, 0x00000000 },

+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x000C0000, 0x00050000, 0x000C0000 },

+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00110000, 0x00210000, 0x00110000 },

+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00320000, 0x00070000, 0x00320000 },

+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00390000, 0x00070000, 0x00390000 },

+  { PlatformFirmwareTypeNvRam,          FlashAddressTypeRelativeAddress, 0x00040000, 0x00080000, 0x00040000 }

+};

+

+/**

+  Used to pass the FMP install function to this lib.  This allows the library to

+  have control of the handle that the FMP instance is installed on.  This allows

+  the library to use DriverBinding protocol model to locate its device(s) in the

+  system.

+

+  @param[in] Func  Function pointer to FMP install function.

+

+  @retval EFI_SUCCESS       Library has saved function pointer and will call

+                            function pointer on each DriverBinding Start.

+  @retval EFI_UNSUPPORTED   Library doesn't use driver binding and only supports

+                            a single instance.

+  @retval other error       Error occurred.  Don't install FMP

+

+**/

+EFI_STATUS

+EFIAPI

+RegisterFmpInstaller (

+  IN FMP_DEVICE_LIB_REGISTER_FMP_INSTALLER Func

+  )

+{

+  //

+  // This is a system firmware update that does not use Driver Binding Protocol

+  //

+  return EFI_UNSUPPORTED;

+}

+

+

+/**

+  Returns the size, in bytes, of the firmware image currently stored in the

+  firmware device.  This function is used to by the GetImage() and

+  GetImageInfo() services of the Firmware Management Protocol.  If the image

+  size can not be determined from the firmware device, then 0 must be returned.

+

+  @param[out] Size  Pointer to the size, in bytes, of the firmware image

+                    currently stored in the firmware device.

+

+  @retval EFI_SUCCESS            The size of the firmware image currently

+                                 stored in the firmware device was returned.

+  @retval EFI_INVALID_PARAMETER  Size is NULL.

+  @retval EFI_UNSUPPORTED        The firmware device does not support reporting

+                                 the size of the currently stored firmware image.

+  @retval EFI_DEVICE_ERROR       An error occured attempting to determine the

+                                 size of the firmware image currently stored in

+                                 in the firmware device.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetSize (

+  IN UINTN  *Size

+  )

+{

+  if (Size == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+  *Size = PcdGet32 (PcdBiosRomBase);

+  return EFI_SUCCESS;

+}

+

+/**

+  Used to return a library supplied guid that will be the ImageTypeId guid of

+  the FMP descriptor.  This is optional but can be used if at runtime the guid

+  needs to be determined.

+

+  @param[out] Guid  Double Guid Ptr that will be updated to point to guid.

+                    This should be from static memory and will not be freed.

+

+  @return EFI_UNSUPPORTED  Library instance doesn't need dynamic guid.

+  @return Error            Any error will cause the wrapper to use the GUID

+                           defined by PCD.

+  @return EFI_SUCCESS      Guid ptr should be updated to point to static memeory

+                           which contains a valid guid.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetImageTypeIdGuidPtr (

+  OUT EFI_GUID  **Guid

+  )

+{

+  return EFI_UNSUPPORTED;

+}

+

+/**

+  Returns values used to fill in the AttributesSupported and AttributesSettings

+  fields of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned by the

+  GetImageInfo() service of the Firmware Management Protocol.  The following

+  bit values from the Firmware Management Protocol may be combined:

+    IMAGE_ATTRIBUTE_IMAGE_UPDATABLE

+    IMAGE_ATTRIBUTE_RESET_REQUIRED

+    IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED

+    IMAGE_ATTRIBUTE_IN_USE

+    IMAGE_ATTRIBUTE_UEFI_IMAGE

+

+  @param[out] Supported  Attributes supported by this firmware device.

+  @param[out] Setting    Attributes settings for this firmware device.

+

+  @retval EFI_SUCCESS            The attributes supported by the firmware

+                                 device were returned.

+  @retval EFI_INVALID_PARAMETER  Supported is NULL.

+  @retval EFI_INVALID_PARAMETER  Setting is NULL.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetAttributes (

+  IN OUT UINT64  *Supported,

+  IN OUT UINT64  *Setting

+  )

+{

+  if (Supported == NULL || Setting == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+  *Supported = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |

+                IMAGE_ATTRIBUTE_RESET_REQUIRED          |

+                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |

+                IMAGE_ATTRIBUTE_IN_USE

+                );

+  *Setting   = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |

+                IMAGE_ATTRIBUTE_RESET_REQUIRED          |

+                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |

+                IMAGE_ATTRIBUTE_IN_USE

+                );

+  return EFI_SUCCESS;

+}

+

+/**

+  Gets the current Lowest Supported Version.

+

+  This is a protection mechanism so that a previous version with known issue is

+  not applied.  ONLY implement this if your running firmware has a method to

+  return this at runtime.  If EFI_UNSUPPORTED is returned, then the Lowest

+  Supported Version is stored in a UEFI Variable.

+

+  @param[out] Version  On return this value represents the current Lowest

+                       Supported Version (in same format as GetVersion).

+

+  @retval EFI_SUCCESS       The Lowest Supported Version was correctly retrieved

+  @retval EFI_UNSUPPORTED   Device firmware doesn't support reporting LSV

+  @retval EFI_DEVICE_ERROR  Error occurred when trying to get the LSV

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetLowestSupportedVersion (

+  IN OUT UINT32  *LowestSupportedVersion

+  )

+{

+  //

+  // Retrieve the lowest support version from a PCD

+  // NOTE: This method of using a PCD can only be used for the system firmware

+  //       FMP instance that is updated every time the system firmware is

+  //       updated.  If system firmware updates support partial updates that

+  //       would not include the system firmware FMP instance, then a PCD can

+  //       not be used and the value must come from the currently running system

+  //       firmware image.

+  //

+  *LowestSupportedVersion = PcdGet32 (PcdSystemFirmwareFmpLowestSupportedVersion);

+  return EFI_SUCCESS;

+}

+

+

+/**

+  Returns the Null-terminated Unicode string that is used to fill in the

+  VersionName field of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is

+  returned by the GetImageInfo() service of the Firmware Management Protocol.

+  The returned string must be allocated using EFI_BOOT_SERVICES.AllocatePool().

+

+  @note It is recommended that all firmware devices support a method to report

+        the VersionName string from the currently stored firmware image.

+

+  @param[out] VersionString  The version string retrieved from the currently

+                             stored firmware image.

+

+  @retval EFI_SUCCESS            The version string of currently stored

+                                 firmware image was returned in Version.

+  @retval EFI_INVALID_PARAMETER  VersionString is NULL.

+  @retval EFI_UNSUPPORTED        The firmware device does not support a method

+                                 to report the version string of the currently

+                                 stored firmware image.

+  @retval EFI_DEVICE_ERROR       An error occurred attempting to retrieve the

+                                 version string of the currently stored

+                                 firmware image.

+  @retval EFI_OUT_OF_RESOURCES   There are not enough resources to allocate the

+                                 buffer for the version string of the currently

+                                 stored firmware image.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetVersionString (

+  OUT CHAR16  **VersionString

+  )

+{

+  if (VersionString == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+

+  //

+  // Retrieve the version string from a PCD

+  // NOTE: This method of using a PCD can only be used for the system firmware

+  //       FMP instance that is updated every time the system firmware is

+  //       updated.  If system firmware updates support partial updates that

+  //       would not include the system firmware FMP instance, then a PCD can

+  //       not be used and the value must come from the currently running system

+  //       firmware image.

+  //

+  *VersionString = (CHAR16 *)AllocateCopyPool (

+                               PcdGetSize (PcdSystemFirmwareFmpVersionString),

+                               PcdGetPtr (PcdSystemFirmwareFmpVersionString)

+                               );

+  if (*VersionString == NULL) {

+    return EFI_OUT_OF_RESOURCES;

+  }

+  return EFI_SUCCESS;

+}

+

+/**

+  Gets the current running version.

+

+  ONLY implement this if your running firmware has a method to return this at

+  runtime.

+

+  @param[out] Version  On return this value represents the current running

+                       version.

+

+  @retval EFI_SUCCESS       The version was correctly retrieved.

+  @retval EFI_UNSUPPORTED   Device firmware doesn't support reporting current

+                            version.

+  @retval EFI_DEVICE_ERROR  Error occurred when trying to get the version.

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetVersion (

+  IN OUT UINT32  *Version

+  )

+{

+  //

+  // Retrieve the version string from a PCD

+  // NOTE: This method of using a PCD can only be used for the system firmware

+  //       FMP instance that is updated every time the system firmware is

+  //       updated.  If system firmware updates support partial updates that

+  //       would not include the system firmware FMP instance, then a PCD can

+  //       not be used and the value must come from the currently running system

+  //       firmware image.

+  //

+  *Version = PcdGet32 (PcdSystemFirmwareFmpVersion);

+  return EFI_SUCCESS;

+}

+

+

+/**

+  Retrieves a copy of the current firmware image of the device.

+

+  This function allows a copy of the current firmware image to be created and

+  saved.  The saved copy could later been used, for example, in firmware image

+  recovery or rollback.

+

+  @param[out] Image      Points to the buffer where the current image is copied

+                         to.

+  @param[out] ImageSize  On entry, points to the size of the buffer pointed to

+                         by Image, in bytes.  On return, points to the length of

+                         the image, in bytes.

+

+  @retval EFI_SUCCESS            The image was successfully read from the device.

+  @retval EFI_BUFFER_TOO_SMALL   The buffer specified by ImageSize is too small

+                                 to hold the image. The current buffer size

+                                 needed to hold the image is returned in

+                                 ImageSize.

+  @retval EFI_INVALID_PARAMETER  The Image was NULL.

+  @retval EFI_NOT_FOUND          The current image is not copied to the buffer.

+  @retval EFI_UNSUPPORTED        The operation is not supported.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetImage (

+  IN OUT VOID   *Image,

+  IN OUT UINTN  *ImageSize

+  )

+{

+  //

+  // Check for invalid p;arameters

+  //

+  if (Image == NULL || ImageSize == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+

+  //

+  // Make sure the buffer is big enough to hold the device image

+  //

+  if (*ImageSize < PcdGet32 (PcdBiosRomSize)) {

+    *ImageSize = PcdGet32 (PcdBiosRomSize);

+    return EFI_BUFFER_TOO_SMALL;

+  }

+

+  //

+  // Copy the device image to the buffer

+  //

+  *ImageSize = PcdGet32 (PcdBiosRomSize);

+  CopyMem (

+    Image,

+    (VOID *)(UINTN)PcdGet32 (PcdBiosRomBase),

+    *ImageSize

+    );

+

+  return EFI_SUCCESS;

+}

+

+/**

+  Updates the firmware image of the device.

+

+  This function updates the hardware with the new firmware image.  This function

+  returns EFI_UNSUPPORTED if the firmware image is not updatable.  If the

+  firmware image is updatable, the function should perform the following minimal

+  validations before proceeding to do the firmware image update.

+    - Validate the image is a supported image for this device.  The function

+      returns EFI_ABORTED if the image is unsupported.  The function can

+      optionally provide more detailed information on why the image is not a

+      supported image.

+    - Validate the data from VendorCode if not null.  Image validation must be

+      performed before VendorCode data validation.  VendorCode data is ignored

+      or considered invalid if image validation failed.  The function returns

+      EFI_ABORTED if the data is invalid.

+

+  VendorCode enables vendor to implement vendor-specific firmware image update

+  policy.  Null if the caller did not specify the policy or use the default

+  policy.  As an example, vendor can implement a policy to allow an option to

+  force a firmware image update when the abort reason is due to the new firmware

+  image version is older than the current firmware image version or bad image

+  checksum.  Sensitive operations such as those wiping the entire firmware image

+  and render the device to be non-functional should be encoded in the image

+  itself rather than passed with the VendorCode.  AbortReason enables vendor to

+  have the option to provide a more detailed description of the abort reason to

+  the caller.

+

+  @param[in]  Image             Points to the new image.

+  @param[in]  ImageSize         Size of the new image in bytes.

+  @param[in]  VendorCode        This enables vendor to implement vendor-specific

+                                firmware image update policy. Null indicates the

+                                caller did not specify the policy or use the

+                                default policy.

+  @param[in]  Progress          A function used by the driver to report the

+                                progress of the firmware update.

+  @param[in]  CapsuleFwVersion  FMP Payload Header version of the image.

+  @param[out] AbortReason       A pointer to a pointer to a null-terminated

+                                string providing more details for the aborted

+                                operation. The buffer is allocated by this

+                                function with AllocatePool(), and it is the

+                                caller's responsibility to free it with a call

+                                to FreePool().

+

+  @retval EFI_SUCCESS            The device was successfully updated with the

+                                 new image.

+  @retval EFI_ABORTED            The operation is aborted.

+  @retval EFI_INVALID_PARAMETER  The Image was NULL.

+  @retval EFI_UNSUPPORTED        The operation is not supported.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceSetImage (

+  IN  CONST VOID                                     *Image,

+  IN  UINTN                                          ImageSize,

+  IN  CONST VOID                                     *VendorCode,

+  IN  EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS  Progress,

+  IN  UINT32                                         CapsuleFwVersion,

+  OUT CHAR16                                         **AbortReason

+  )

+{

+  EFI_STATUS          Status;

+  UINT32              Updateable;

+  UINTN               Percentage;

+  UINTN               Index;

+  UPDATE_CONFIG_DATA  *ConfigData;

+  UINTN               TotalSize;

+  UINTN               BytesWritten;

+

+  Updateable = 0;

+  Status = FmpDeviceCheckImage (Image, ImageSize, &Updateable);

+  if (EFI_ERROR (Status)) {

+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Check Image failed with %r.\n", Status));

+    return Status;

+  }

+

+  if (Updateable != IMAGE_UPDATABLE_VALID) {

+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Check Image returned that the Image was not valid for update.  Updatable value = 0x%X.\n", Updateable));

+    return EFI_ABORTED;

+  }

+

+  if (Progress == NULL) {

+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Invalid progress callback\n"));

+    return EFI_INVALID_PARAMETER;

+  }

+

+  Status = Progress (15);

+  if (EFI_ERROR (Status)) {

+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));

+  }

+

+  //

+  // Write the image to the firmware device

+  //

+  Progress (20);

+  if (EFI_ERROR (Status)) {

+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));

+  }

+

+  //

+  // Simulate update with delays between progress updates

+  //

+  for (Percentage = 20; Percentage <= 100; Percentage++) {

+    //

+    // Wait 0.05 seconds

+    //

+//    gBS->Stall (50000);

+

+//    Progress (Percentage);

+//    if (EFI_ERROR (Status)) {

+//      DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));

+//    }

+  }

+

+  DEBUG ((DEBUG_INFO, "FmpDeviceSetImage - %d Images ...\n", ARRAY_SIZE (mUpdateConfigData)));

+

+  if (ARRAY_SIZE (mUpdateConfigData) == 0) {

+    DEBUG((DEBUG_INFO, "PlatformUpdate: BaseAddress - 0x%lx ImageOffset - 0x%x Length - 0x%x\n", 0, 0, ImageSize));

+    Status = PerformFlashWriteWithProgress (

+               PlatformFirmwareTypeSystemFirmware,  // FirmwareType

+               0x00000000,                          // FlashAddress

+               FlashAddressTypeRelativeAddress,     // FlashAddressType

+               (VOID *)(UINTN)Image,                // Buffer

+               ImageSize,                           // BufferLength

+               Progress,                            // Progress

+               20,                                  // StartPercentage

+               100                                  // EndPercentage

+               );

+  }

+

+

+  //

+  // Compute total size of update

+  //

+  for (Index = 0, TotalSize = 0; Index < ARRAY_SIZE (mUpdateConfigData); Index++) {

+    TotalSize += mUpdateConfigData[Index].Length;

+  }

+

+  BytesWritten = 0;

+  for (Index = 0, ConfigData = mUpdateConfigData; Index < ARRAY_SIZE (mUpdateConfigData); Index++, ConfigData++) {

+    DEBUG((DEBUG_INFO, "PlatformUpdate(%d): BaseAddress - 0x%lx ImageOffset - 0x%x Length - 0x%x\n",

+      Index,

+      ConfigData->BaseAddress,

+      ConfigData->ImageOffset,

+      ConfigData->Length

+      ));

+    Status = PerformFlashWriteWithProgress (

+               ConfigData->FirmwareType,                                     // FirmwareType

+               ConfigData->BaseAddress,                                      // FlashAddress

+               ConfigData->AddressType,                                      // FlashAddressType

+               (VOID *)((UINTN)Image + (UINTN)ConfigData->ImageOffset),      // Buffer

+               ConfigData->Length,                                           // BufferLength

+               Progress,                                                     // Progress

+               20 + (BytesWritten * 80) / TotalSize,                         // StartPercentage

+               20 + ((BytesWritten + ConfigData->Length) * 80) / TotalSize   // EndPercentage

+               );

+    if (EFI_ERROR(Status)) {

+      break;

+    }

+    BytesWritten += ConfigData->Length;

+  }

+

+  DEBUG ((DEBUG_INFO, "FmpDeviceSetImage - %r\n", Status));

+

+  return Status;

+}

+

+/**

+Checks if the firmware image is valid for the device.

+

+This function allows firmware update application to validate the firmware image without

+invoking the SetImage() first.

+

+@param[in]  Image              Points to the new image.

+@param[in]  ImageSize          Size of the new image in bytes.

+@param[out] ImageUpdatable     Indicates if the new image is valid for update. It also provides,

+if available, additional information if the image is invalid.

+

+@retval EFI_SUCCESS            The image was successfully checked.

+@retval EFI_INVALID_PARAMETER  The Image was NULL.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceCheckImage (

+  IN  CONST VOID  *Image,

+  IN  UINTN       ImageSize,

+  OUT UINT32      *ImageUpdateable

+  )

+{

+  if (ImageUpdateable == NULL) {

+    DEBUG((DEBUG_ERROR, "CheckImage - ImageUpdateable Pointer Parameter is NULL.\n"));

+    return EFI_INVALID_PARAMETER;

+  }

+

+  //

+  //Set to valid and then if any tests fail it will update this flag.

+  //

+  *ImageUpdateable = IMAGE_UPDATABLE_VALID;

+

+  if (Image == NULL) {

+    DEBUG((DEBUG_ERROR, "CheckImage - Image Pointer Parameter is NULL.\n"));

+    //

+    // Not sure if this is needed

+    //

+    *ImageUpdateable = IMAGE_UPDATABLE_INVALID;

+    return EFI_INVALID_PARAMETER;

+  }

+

+  //

+  // Make sure the image size is correct

+  //

+  if (ImageSize != PcdGet32 (PcdBiosRomSize)) {

+    *ImageUpdateable = IMAGE_UPDATABLE_INVALID;

+    return EFI_INVALID_PARAMETER;

+  }

+

+  return EFI_SUCCESS;

+}

+

+/**

+  Device firmware should trigger lock mechanism so that device fw can not be

+  updated or tampered with. This lock mechanism is generally only cleared by a

+  full system reset (not just sleep state/low power mode)

+

+  @retval EFI_SUCCESS           The device was successfully locked.

+  @retval EFI_UNSUPPORTED       The hardware device/firmware doesn't support locking

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceLock (

+  VOID

+  )

+{

+  DEBUG ((DEBUG_INFO, "VLV2: FmpDeviceLock() for system FLASH\n"));

+  // TODO: Add lock logic

+  return EFI_UNSUPPORTED;

+}

diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf
new file mode 100644
index 0000000000..af4eabf0ad
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf
@@ -0,0 +1,63 @@
+##

+# Copyright (c) 2016, Microsoft Corporation

+

+# All rights reserved.

+# Redistribution and use in source and binary forms, with or without

+# modification, are permitted provided that the following conditions are met:

+# 1. Redistributions of source code must retain the above copyright notice,

+# this list of conditions and the following disclaimer.

+# 2. Redistributions in binary form must reproduce the above copyright notice,

+# this list of conditions and the following disclaimer in the documentation

+# and/or other materials provided with the distribution.

+#

+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+##

+

+

+[Defines]

+  INF_VERSION                    = 0x00010005

+  BASE_NAME                      = Vlv2FmpDeviceLib

+  FILE_GUID                      = 83723F51-39B5-4D99-A974-90132AB55F83

+  MODULE_TYPE                    = DXE_DRIVER

+  VERSION_STRING                 = 1.0

+  LIBRARY_CLASS                  = FmpDeviceLib|DXE_DRIVER

+

+#

+# The following information is for reference only and not required by the build tools.

+#

+#  VALID_ARCHITECTURES           = IA32 X64

+#

+

+[Sources]

+  FmpDeviceLib.c

+

+[Packages]

+  MdePkg/MdePkg.dec

+  FmpDevicePkg/FmpDevicePkg.dec

+  SignedCapsulePkg/SignedCapsulePkg.dec

+  Vlv2TbltDevicePkg/PlatformPkg.dec

+

+[LibraryClasses]

+  DebugLib

+  BaseLib

+  BaseMemoryLib

+  MemoryAllocationLib

+  UefiBootServicesTableLib

+  PlatformFlashAccessLib

+

+[Pcd]

+  gPlatformModuleTokenSpaceGuid.PcdBiosRomBase

+  gPlatformModuleTokenSpaceGuid.PcdBiosRomSize

+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpLowestSupportedVersion

+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpVersion

+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpVersionString

+

diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c
new file mode 100644
index 0000000000..19a152bfc5
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c
@@ -0,0 +1,429 @@
+/**

+

+Copyright (c) 2016, Microsoft Corporation

+

+All rights reserved.

+Redistribution and use in source and binary forms, with or without

+modification, are permitted provided that the following conditions are met:

+1. Redistributions of source code must retain the above copyright notice,

+this list of conditions and the following disclaimer.

+2. Redistributions in binary form must reproduce the above copyright notice,

+this list of conditions and the following disclaimer in the documentation

+ and/or other materials provided with the distribution.

+

+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+

+**/

+

+

+#include <PiDxe.h>

+#include <Library/DebugLib.h>

+#include <Protocol/FirmwareManagement.h>

+#include <Library/BaseLib.h>

+#include <Library/MemoryAllocationLib.h>

+#include <Library/BaseMemoryLib.h>

+#include <Library/FmpDeviceLib.h>

+#include <Library/UefiBootServicesTableLib.h>

+

+/**

+  Used to pass the FMP install function to this lib.

+  This allows the library to have control of the handle

+  that the FMP instance is installed on.  This allows the library

+  to use DriverBinding protocol model to locate its device(s) in the

+  system.

+

+  @param[in]  Function pointer to FMP install function.

+

+  @retval EFI_SUCCESS      Library has saved function pointer and will call function pointer on each DriverBinding Start.

+  @retval EFI_UNSUPPORTED  Library doesn't use driver binding and only supports a single instance.

+  @retval other error      Error occurred.  Don't install FMP

+

+**/

+EFI_STATUS

+EFIAPI

+RegisterFmpInstaller(

+IN FMP_DEVICE_LIB_REGISTER_FMP_INSTALLER Func

+)

+{

+  // Because this is a sample lib with very simple fake device we don't use

+  // the driverbinding protocol to locate our device.

+  //

+  return EFI_UNSUPPORTED;

+}

+

+

+/**

+Used to get the size of the image in bytes.

+NOTE - Do not return zero as that will identify the device as

+not updatable.

+

+@retval UINTN that represents the size of the firmware.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetSize (

+  IN UINTN  *Size

+  )

+{

+  if (Size == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+  *Size = 0x1000;

+  return EFI_SUCCESS;

+}

+

+/**

+Used to return a library supplied guid that will be the ImageTypeId guid of the FMP descriptor.

+This is optional but can be used if at runtime the guid needs to be determined.

+

+@param  Guid:  Double Guid Ptr that will be updated to point to guid.  This should be from static memory

+and will not be freed.

+@return EFI_UNSUPPORTED: if you library instance doesn't need dynamic guid return this.

+@return Error: Any error will cause the wrapper to use the GUID defined by PCD

+@return EFI_SUCCESS:  Guid ptr should be updated to point to static memeory which contains a valid guid

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetImageTypeIdGuidPtr(

+  OUT EFI_GUID** Guid)

+{

+  //this instance doesn't need dynamic guid detection.

+  return EFI_UNSUPPORTED;

+}

+

+/**

+  Returns values used to fill in the AttributesSupported and AttributesSettings

+  fields of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned by the

+  GetImageInfo() service of the Firmware Management Protocol.  The following

+  bit values from the Firmware Management Protocol may be combined:

+    IMAGE_ATTRIBUTE_IMAGE_UPDATABLE

+    IMAGE_ATTRIBUTE_RESET_REQUIRED

+    IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED

+    IMAGE_ATTRIBUTE_IN_USE

+    IMAGE_ATTRIBUTE_UEFI_IMAGE

+

+  @param[out] Supported  Attributes supported by this firmware device.

+  @param[out] Setting    Attributes settings for this firmware device.

+

+  @retval EFI_SUCCESS            The attributes supported by the firmware

+                                 device were returned.

+  @retval EFI_INVALID_PARAMETER  Supported is NULL.

+  @retval EFI_INVALID_PARAMETER  Setting is NULL.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetAttributes (

+  IN OUT UINT64  *Supported,

+  IN OUT UINT64  *Setting

+  )

+{

+  if (Supported == NULL || Setting == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+  *Supported = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE | IMAGE_ATTRIBUTE_IN_USE);

+  *Setting   = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE | IMAGE_ATTRIBUTE_IN_USE);

+  return EFI_SUCCESS;

+}

+

+/**

+Gets the current Lowest Supported Version.

+This is a protection mechanism so that a previous version with known issue is not

+applied.

+

+ONLY implement this if your running firmware has a method to return this at runtime.

+

+@param[out] Version           On return this value represents the

+current Lowest Supported Version (in same format as GetVersion).

+

+@retval EFI_SUCCESS           The Lowest Supported Version was correctly retrieved

+@retval EFI_UNSUPPORTED       Device firmware doesn't support reporting LSV

+@retval EFI_DEVICE_ERROR      Error occurred when trying to get the LSV

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetLowestSupportedVersion (

+  IN OUT UINT32* LowestSupportedVersion

+  )

+{

+  return EFI_UNSUPPORTED;

+}

+

+

+/**

+  Returns the Null-terminated Unicode string that is used to fill in the

+  VersionName field of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is

+  returned by the GetImageInfo() service of the Firmware Management Protocol.

+  The returned string must be allocated using EFI_BOOT_SERVICES.AllocatePool().

+

+  @note It is recommended that all firmware devices support a method to report

+        the VersionName string from the currently stored firmware image.

+

+  @param[out] VersionString  The version string retrieved from the currently

+                             stored firmware image.

+

+  @retval EFI_SUCCESS            The version string of currently stored

+                                 firmware image was returned in Version.

+  @retval EFI_INVALID_PARAMETER  VersionString is NULL.

+  @retval EFI_UNSUPPORTED        The firmware device does not support a method

+                                 to report the version string of the currently

+                                 stored firmware image.

+  @retval EFI_DEVICE_ERROR       An error occurred attempting to retrieve the

+                                 version string of the currently stored

+                                 firmware image.

+  @retval EFI_OUT_OF_RESOURCES   There are not enough resources to allocate the

+                                 buffer for the version string of the currently

+                                 stored firmware image.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetVersionString (

+  OUT CHAR16  **VersionString

+  )

+{

+  if (VersionString == NULL) {

+    return EFI_INVALID_PARAMETER;

+  }

+  *VersionString = NULL;

+  return EFI_UNSUPPORTED;

+}

+

+/**

+Gets the current running version.

+ONLY implement this if your running firmware has a method to return this at runtime.

+

+@param[out] Version           On return this value represents the current running version

+

+@retval EFI_SUCCESS           The version was correctly retrieved

+@retval EFI_UNSUPPORTED       Device firmware doesn't support reporting current version

+@retval EFI_DEVICE_ERROR      Error occurred when trying to get the version

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetVersion(

+IN OUT UINT32* Version

+)

+{

+  return EFI_UNSUPPORTED;

+}

+

+

+/**

+Retrieves a copy of the current firmware image of the device.

+

+This function allows a copy of the current firmware image to be created and saved.

+The saved copy could later been used, for example, in firmware image recovery or rollback.

+

+@param[out] Image              Points to the buffer where the current image is copied to.

+@param[out] ImageSize          On entry, points to the size of the buffer pointed to by Image, in bytes.

+On return, points to the length of the image, in bytes.

+

+@retval EFI_SUCCESS            The device was successfully updated with the new image.

+@retval EFI_BUFFER_TOO_SMALL   The buffer specified by ImageSize is too small to hold the

+image. The current buffer size needed to hold the image is returned

+in ImageSize.

+@retval EFI_INVALID_PARAMETER  The Image was NULL.

+@retval EFI_NOT_FOUND          The current image is not copied to the buffer.

+@retval EFI_UNSUPPORTED        The operation is not supported.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceGetImage(

+IN  OUT  VOID                         *Image,

+IN  OUT  UINTN                        *ImageSize

+)

+/*++

+

+Routine Description:

+

+    This is a function used to read the current firmware from the device into memory.

+    This is an optional function and can return EFI_UNSUPPORTED.  This is useful for

+    test and diagnostics.

+

+Arguments:

+    Image               -- Buffer to place the image into.

+    ImageSize           -- Size of the Image buffer.

+

+Return Value:

+

+    EFI_STATUS code.

+    If not possible or not practical return EFI_UNSUPPORTED.

+

+--*/

+{

+  return EFI_UNSUPPORTED;

+}//GetImage()

+

+

+/**

+Updates the firmware image of the device.

+

+This function updates the hardware with the new firmware image.

+This function returns EFI_UNSUPPORTED if the firmware image is not updatable.

+If the firmware image is updatable, the function should perform the following minimal validations

+before proceeding to do the firmware image update.

+- Validate the image is a supported image for this device.  The function returns EFI_ABORTED if

+the image is unsupported.  The function can optionally provide more detailed information on

+why the image is not a supported image.

+- Validate the data from VendorCode if not null.  Image validation must be performed before

+VendorCode data validation.  VendorCode data is ignored or considered invalid if image

+validation failed.  The function returns EFI_ABORTED if the data is invalid.

+

+VendorCode enables vendor to implement vendor-specific firmware image update policy.  Null if

+the caller did not specify the policy or use the default policy.  As an example, vendor can implement

+a policy to allow an option to force a firmware image update when the abort reason is due to the new

+firmware image version is older than the current firmware image version or bad image checksum.

+Sensitive operations such as those wiping the entire firmware image and render the device to be

+non-functional should be encoded in the image itself rather than passed with the VendorCode.

+AbortReason enables vendor to have the option to provide a more detailed description of the abort

+reason to the caller.

+

+@param[in]  Image              Points to the new image.

+@param[in]  ImageSize          Size of the new image in bytes.

+@param[in]  VendorCode         This enables vendor to implement vendor-specific firmware image update policy.

+Null indicates the caller did not specify the policy or use the default policy.

+@param[in]  Progress           A function used by the driver to report the progress of the firmware update.

+@param[in]  CapsuleFwVersion   FMP Payload Header version of the image

+@param[out] AbortReason        A pointer to a pointer to a null-terminated string providing more

+details for the aborted operation. The buffer is allocated by this function

+with AllocatePool(), and it is the caller's responsibility to free it with a

+call to FreePool().

+

+@retval EFI_SUCCESS            The device was successfully updated with the new image.

+@retval EFI_ABORTED            The operation is aborted.

+@retval EFI_INVALID_PARAMETER  The Image was NULL.

+@retval EFI_UNSUPPORTED        The operation is not supported.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceSetImage (

+IN  CONST VOID                                       *Image,

+IN  UINTN                                            ImageSize,

+IN  CONST VOID                                       *VendorCode,

+IN  EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS    Progress,

+IN  UINT32                                           CapsuleFwVersion,

+OUT CHAR16                                           **AbortReason

+)

+{

+    EFI_STATUS Status                         = EFI_SUCCESS;

+    UINT32 Updateable                         = 0;

+

+    Status = FmpDeviceCheckImage(Image, ImageSize, &Updateable);

+    if (EFI_ERROR(Status))

+    {

+        DEBUG((DEBUG_ERROR, "SetImage - Check Image failed with %r.\n", Status));

+        goto cleanup;

+    }

+

+    if (Updateable != IMAGE_UPDATABLE_VALID)

+    {

+        DEBUG((DEBUG_ERROR, "SetImage - Check Image returned that the Image was not valid for update.  Updatable value = 0x%X.\n", Updateable));

+        Status = EFI_ABORTED;

+        goto cleanup;

+    }

+

+    if (Progress == NULL)

+    {

+        DEBUG((DEBUG_ERROR, "SetImage - Invalid progress callback\n"));

+        Status = EFI_INVALID_PARAMETER;

+        goto cleanup;

+    }

+

+    Status = Progress(15);

+    if (EFI_ERROR(Status))

+    {

+        DEBUG((DEBUG_ERROR, "SetImage - Progress Callback failed with Status %r.\n", Status));

+    }

+

+    {

+      UINTN  p;

+

+      for (p = 20; p < 100; p++) {

+        gBS->Stall (100000);  //us  = 0.1 seconds

+        Progress (p);

+      }

+    }

+

+    //TODO: add support for VendorCode, and AbortReason

+cleanup:

+    return Status;

+}// SetImage()

+

+

+

+/**

+Checks if the firmware image is valid for the device.

+

+This function allows firmware update application to validate the firmware image without

+invoking the SetImage() first.

+

+@param[in]  Image              Points to the new image.

+@param[in]  ImageSize          Size of the new image in bytes.

+@param[out] ImageUpdatable     Indicates if the new image is valid for update. It also provides,

+if available, additional information if the image is invalid.

+

+@retval EFI_SUCCESS            The image was successfully checked.

+@retval EFI_INVALID_PARAMETER  The Image was NULL.

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceCheckImage(

+IN  CONST VOID                        *Image,

+IN  UINTN                             ImageSize,

+OUT UINT32                            *ImageUpdateable

+)

+{

+    EFI_STATUS status = EFI_SUCCESS;

+

+    if (ImageUpdateable == NULL)

+    {

+        DEBUG((DEBUG_ERROR, "CheckImage - ImageUpdateable Pointer Parameter is NULL.\n"));

+        status = EFI_INVALID_PARAMETER;

+        goto cleanup;

+    }

+

+    //

+    //Set to valid and then if any tests fail it will update this flag.

+    //

+    *ImageUpdateable = IMAGE_UPDATABLE_VALID;

+

+    if (Image == NULL)

+    {

+        DEBUG((DEBUG_ERROR, "CheckImage - Image Pointer Parameter is NULL.\n"));

+        *ImageUpdateable = IMAGE_UPDATABLE_INVALID; //not sure if this is needed

+        return EFI_INVALID_PARAMETER;

+    }

+

+cleanup:

+    return status;

+}// CheckImage()

+

+/**

+Device firmware should trigger lock mechanism so that device fw can not be updated or tampered with.

+This lock mechanism is generally only cleared by a full system reset (not just sleep state/low power mode)

+

+@retval EFI_SUCCESS           The device was successfully locked.

+@retval EFI_UNSUPPORTED       The hardware device/firmware doesn't support locking

+

+**/

+EFI_STATUS

+EFIAPI

+FmpDeviceLock(

+)

+{

+  return EFI_SUCCESS;

+}

diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf
new file mode 100644
index 0000000000..6914c57ee7
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf
@@ -0,0 +1,51 @@
+##

+# Copyright (c) 2016, Microsoft Corporation

+

+# All rights reserved.

+# Redistribution and use in source and binary forms, with or without

+# modification, are permitted provided that the following conditions are met:

+# 1. Redistributions of source code must retain the above copyright notice,

+# this list of conditions and the following disclaimer.

+# 2. Redistributions in binary form must reproduce the above copyright notice,

+# this list of conditions and the following disclaimer in the documentation

+# and/or other materials provided with the distribution.

+#

+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+##

+

+

+[Defines]

+  INF_VERSION                    = 0x00010005

+  BASE_NAME                      = Vlv2FmpDeviceLibSample

+  FILE_GUID                      = 582DF9AB-E626-42A8-A11C-3FEA098FF3FA

+  MODULE_TYPE                    = DXE_DRIVER

+  VERSION_STRING                 = 1.0

+  LIBRARY_CLASS                  = FmpDeviceLib|DXE_DRIVER

+

+#

+# The following information is for reference only and not required by the build tools.

+#

+#  VALID_ARCHITECTURES           = IA32 X64

+#

+

+[Sources]

+  FmpDeviceLib.c

+

+[Packages]

+  MdePkg/MdePkg.dec

+  FmpDevicePkg/FmpDevicePkg.dec

+

+[LibraryClasses]

+  DebugLib

+  BaseLib

+  UefiBootServicesTableLib   #for stall...remove later as stall is only needed to show progress

+