CorebootModulePkg: Fix various typos

Fix various typos in CorebootModulePkg.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>

10 files changed, 57 insertions, 57 deletions

diff --git a/CorebootModulePkg/Include/Library/CbParseLib.h b/CorebootModulePkg/Include/Library/CbParseLib.h
index 12dd4fa979..be39bd0923 100644
--- a/CorebootModulePkg/Include/Library/CbParseLib.h
+++ b/CorebootModulePkg/Include/Library/CbParseLib.h
@@ -25,7 +25,7 @@ typedef RETURN_STATUS \
   @param  Tag                The tag id to be found

 

   @retval NULL              The Tag is not found.

-  @retval Others            The poiter to the record found.

+  @retval Others            The pointer to the record found.

 

 **/

 VOID *

@@ -51,7 +51,7 @@ CbParseMemoryInfo (
   IN  CB_MEM_INFO_CALLBACK  MemInfoCallback,

   IN  VOID                  *pParam

   );

-
+

 /**

   Acquire the coreboot memory table with the given table id

 

@@ -67,11 +67,11 @@ CbParseMemoryInfo (
 RETURN_STATUS

 EFIAPI

 CbParseCbMemTable (

-  IN UINT32     TableId,
+  IN UINT32     TableId,

   IN VOID**     pMemTable,

   IN UINT32*    pMemTableSize

   );

-
+

 /**

   Acquire the acpi table from coreboot

 

@@ -89,7 +89,7 @@ CbParseAcpiTable (
   IN VOID**     pMemTable,

   IN UINT32*    pMemTableSize

   );

-
+

 /**

   Acquire the smbios table from coreboot

 

@@ -107,14 +107,14 @@ CbParseSmbiosTable (
   IN VOID**     pMemTable,

   IN UINT32*    pMemTableSize

   );

-
+

 /**

   Find the required fadt information

 

   @param  pPmCtrlReg         Pointer to the address of power management control register

   @param  pPmTimerReg        Pointer to the address of power management timer register

   @param  pResetReg          Pointer to the address of system reset register

-  @param  pResetValue        Pointer to the value to be writen to the system reset register

+  @param  pResetValue        Pointer to the value to be written to the system reset register

   @param  pPmEvtReg          Pointer to the address of power management event register

   @param  pPmGpeEnReg        Pointer to the address of power management GPE enable register

 

@@ -132,16 +132,16 @@ CbParseFadtInfo (
   IN UINTN*     pPmEvtReg,

   IN UINTN*     pPmGpeEnReg

   );

-
+

 /**

   Find the serial port information

 

   @param  pRegBase           Pointer to the base address of serial port registers

   @param  pRegAccessType     Pointer to the access type of serial port registers

-  @param  pRegWidth          Pointer to the register width in bytes
+  @param  pRegWidth          Pointer to the register width in bytes

   @param  pBaudrate          Pointer to the serial port baudrate

-  @param  pInputHertz        Pointer to the input clock frequency
-  @param  pUartPciAddr       Pointer to the UART PCI bus, dev and func address
+  @param  pInputHertz        Pointer to the input clock frequency

+  @param  pUartPciAddr       Pointer to the UART PCI bus, dev and func address

 

   @retval RETURN_SUCCESS     Successfully find the serial port information.

   @retval RETURN_NOT_FOUND   Failed to find the serial port information .

@@ -150,12 +150,12 @@ CbParseFadtInfo (
 RETURN_STATUS

 EFIAPI

 CbParseSerialInfo (

-  OUT UINT32     *pRegBase,
-  OUT UINT32     *pRegAccessType,
-  OUT UINT32     *pRegWidth,
-  OUT UINT32     *pBaudrate,
-  OUT UINT32     *pInputHertz,
-  OUT UINT32     *pUartPciAddr
+  OUT UINT32     *pRegBase,

+  OUT UINT32     *pRegAccessType,

+  OUT UINT32     *pRegWidth,

+  OUT UINT32     *pBaudrate,

+  OUT UINT32     *pInputHertz,

+  OUT UINT32     *pUartPciAddr

   );

 

 /**

@@ -174,7 +174,7 @@ CbParseGetCbHeader (
   IN UINTN  Level,

   IN VOID** HeaderPtr

   );

-
+

 /**

   Find the video frame buffer information

 

diff --git a/CorebootModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c b/CorebootModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
index ca6db2306a..a5e1755a44 100644
--- a/CorebootModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
+++ b/CorebootModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
@@ -23,7 +23,7 @@
 #include <Library/BaseLib.h>
 
 //
-// PCI Defintions.
+// PCI Definitions.

 //
 #define PCI_BRIDGE_32_BIT_IO_SPACE              0x01
 
@@ -451,7 +451,7 @@ SerialPortWritable (
       //    0    0   No cable connected.                       Transmit
       //    0    1   No cable connected.                       Transmit
       //    1    0   Cable connected, but not clear to send.   Wait
-      //    1    1   Cable connected, and clar to send.        Transmit
+      //    1    1   Cable connected, and clear to send.       Transmit

       //
       return (BOOLEAN) ((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) != (B_UART_MSR_DSR));
     }
@@ -722,7 +722,7 @@ SerialPortRead (
 /**
   Polls a serial device to see if there is any data waiting to be read.
 
-  Polls aserial device to see if there is any data waiting to be read.
+  Polls a serial device to see if there is any data waiting to be read.

   If there is data waiting to be read from the serial device, then TRUE is returned.
   If there is no data waiting to be read from the serial device, then FALSE is returned.
 
@@ -903,13 +903,13 @@ SerialPortGetControl (
 }
 
 /**
-  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,

   data bits, and stop bits on a serial device.
 
   @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
                             device's default interface speed.
                             On output, the value actually set.
-  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+  @param ReceiveFifoDepth   The requested depth of the FIFO on the receive side of the

                             serial interface. A ReceiveFifoDepth value of 0 will use
                             the device's default FIFO depth.
                             On output, the value actually set.
@@ -922,7 +922,7 @@ SerialPortGetControl (
                             DefaultParity will use the device's default parity value.
                             On output, the value actually set.
   @param DataBits           The number of data bits to use on the serial device. A DataBits
-                            vaule of 0 will use the device's default data bit setting.
+                            value of 0 will use the device's default data bit setting.

                             On output, the value actually set.
   @param StopBits           The number of stop bits to use on this serial device. A StopBits
                             value of DefaultStopBits will use the device's default number of
diff --git a/CorebootModulePkg/Library/CbParseLib/CbParseLib.c b/CorebootModulePkg/Library/CbParseLib/CbParseLib.c
index da227dea5e..24eb2f5297 100644
--- a/CorebootModulePkg/Library/CbParseLib/CbParseLib.c
+++ b/CorebootModulePkg/Library/CbParseLib/CbParseLib.c
@@ -31,7 +31,7 @@
 

   @param  val      The pointer to packed data.

 

-  @return          the UNIT64 value after convertion.

+  @return          the UNIT64 value after conversion.

 

 **/

 UINT64

@@ -91,7 +91,7 @@ CbCheckSum16 (
   @param  Tag                The tag id to be found

 

   @retval NULL              The Tag is not found.

-  @retval Others            The poiter to the record found.

+  @retval Others            The pointer to the record found.

 

 **/

 VOID *

@@ -384,7 +384,7 @@ CbParseSmbiosTable (
   @param  pPmCtrlReg         Pointer to the address of power management control register

   @param  pPmTimerReg        Pointer to the address of power management timer register

   @param  pResetReg          Pointer to the address of system reset register

-  @param  pResetValue        Pointer to the value to be writen to the system reset register

+  @param  pResetValue        Pointer to the value to be written to the system reset register

   @param  pPmEvtReg          Pointer to the address of power management event register

   @param  pPmGpeEnReg        Pointer to the address of power management GPE enable register

 

diff --git a/CorebootModulePkg/SataControllerDxe/SataController.h b/CorebootModulePkg/SataControllerDxe/SataController.h
index e76df748d7..1ef4555615 100644
--- a/CorebootModulePkg/SataControllerDxe/SataController.h
+++ b/CorebootModulePkg/SataControllerDxe/SataController.h
@@ -91,7 +91,7 @@ typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {
   UINT8                             DeviceCount;
 
   //
-  // The highest disqulified mode for each attached device,
+  // The highest disqualified mode for each attached device,

   // From ATA/ATAPI spec, if a mode is not supported,
   // the modes higher than it is also not supported
   //
diff --git a/CorebootModulePkg/SecCore/FindPeiCore.c b/CorebootModulePkg/SecCore/FindPeiCore.c
index 4ce032e72d..1d49168c24 100644
--- a/CorebootModulePkg/SecCore/FindPeiCore.c
+++ b/CorebootModulePkg/SecCore/FindPeiCore.c
@@ -146,7 +146,7 @@ FindImageBase (
 /**

   Find and return Pei Core entry point.

 

-  It also find SEC and PEI Core file debug inforamtion. It will report them if

+  It also find SEC and PEI Core file debug information. It will report them if

   remote debug is enabled.

   

   @param   BootFirmwareVolumePtr    Point to the boot firmware volume.

diff --git a/CorebootModulePkg/SecCore/Ia32/Stack.S b/CorebootModulePkg/SecCore/Ia32/Stack.S
index cd492404a0..6a8e0e4b15 100644
--- a/CorebootModulePkg/SecCore/Ia32/Stack.S
+++ b/CorebootModulePkg/SecCore/Ia32/Stack.S
@@ -11,7 +11,7 @@
 #
 # Abstract:
 #
-#   Switch the stack from temporary memory to permenent memory.
+#   Switch the stack from temporary memory to permanent memory.

 #
 #------------------------------------------------------------------------------
 
@@ -36,20 +36,20 @@ ASM_PFX(SecSwitchStack):
 
     #
     # !!CAUTION!! this function address's is pushed into stack after
-    # migration of whole temporary memory, so need save it to permenent
+    # migration of whole temporary memory, so need save it to permanent

     # memory at first!
     #
     movl  20(%esp), %ebx         # Save the first parameter
     movl  24(%esp), %ecx         # Save the second parameter
 
     #
-    # Save this function's return address into permenent memory at first.
-    # Then, Fixup the esp point to permenent memory
+    # Save this function's return address into permanent memory at first.

+    # Then, Fixup the esp point to permanent memory

     #
     movl  %esp, %eax
     subl  %ebx, %eax
     addl  %ecx, %eax
-    movl  0(%esp), %edx          # copy pushed register's value to permenent memory
+    movl  0(%esp), %edx          # copy pushed register's value to permanent memory

     movl  %edx, 0(%eax)
     movl  4(%esp), %edx
     movl  %edx, 4(%eax)
@@ -57,17 +57,17 @@ ASM_PFX(SecSwitchStack):
     movl  %edx, 8(%eax)
     movl  12(%esp), %edx
     movl  %edx, 12(%eax)
-    movl  16(%esp), %edx        # Update this function's return address into permenent memory
+    movl  16(%esp), %edx        # Update this function's return address into permanent memory

     movl  %edx, 16(%eax)
-    movl  %eax, %esp            # From now, esp is pointed to permenent memory
+    movl  %eax, %esp            # From now, esp is pointed to permanent memory

 
     #
-    # Fixup the ebp point to permenent memory
+    # Fixup the ebp point to permanent memory

     #
     movl  %ebp, %eax
     subl  %ebx, %eax
     addl  %ecx, %eax
-    movl  %eax, %ebp            # From now, ebp is pointed to permenent memory
+    movl  %eax, %ebp            # From now, ebp is pointed to permanent memory

 
     popl  %edx
     popl  %ecx
diff --git a/CorebootModulePkg/SecCore/Ia32/Stack.asm b/CorebootModulePkg/SecCore/Ia32/Stack.asm
index 9d1ed153e1..cdddc5433f 100644
--- a/CorebootModulePkg/SecCore/Ia32/Stack.asm
+++ b/CorebootModulePkg/SecCore/Ia32/Stack.asm
@@ -11,7 +11,7 @@
 ;

 ; Abstract:

 ;

-;   Switch the stack from temporary memory to permenent memory.

+;   Switch the stack from temporary memory to permanent memory.

 ;

 ;------------------------------------------------------------------------------

 

@@ -38,7 +38,7 @@ SecSwitchStack   PROC
     

     ;

     ; !!CAUTION!! this function address's is pushed into stack after

-    ; migration of whole temporary memory, so need save it to permenent

+    ; migration of whole temporary memory, so need save it to permanent

     ; memory at first!

     ;

     

@@ -46,13 +46,13 @@ SecSwitchStack   PROC
     mov   ecx, [esp + 24]          ; Save the second parameter

     

     ;

-    ; Save this function's return address into permenent memory at first.

-    ; Then, Fixup the esp point to permenent memory

+    ; Save this function's return address into permanent memory at first.

+    ; Then, Fixup the esp point to permanent memory

     ;

     mov   eax, esp

     sub   eax, ebx

     add   eax, ecx

-    mov   edx, dword ptr [esp]         ; copy pushed register's value to permenent memory

+    mov   edx, dword ptr [esp]         ; copy pushed register's value to permanent memory

     mov   dword ptr [eax], edx    

     mov   edx, dword ptr [esp + 4]

     mov   dword ptr [eax + 4], edx    

@@ -60,17 +60,17 @@ SecSwitchStack   PROC
     mov   dword ptr [eax + 8], edx    

     mov   edx, dword ptr [esp + 12]

     mov   dword ptr [eax + 12], edx    

-    mov   edx, dword ptr [esp + 16]    ; Update this function's return address into permenent memory

+    mov   edx, dword ptr [esp + 16]    ; Update this function's return address into permanent memory

     mov   dword ptr [eax + 16], edx    

-    mov   esp, eax                     ; From now, esp is pointed to permenent memory

+    mov   esp, eax                     ; From now, esp is pointed to permanent memory

         

     ;

-    ; Fixup the ebp point to permenent memory

+    ; Fixup the ebp point to permanent memory

     ;

     mov   eax, ebp

     sub   eax, ebx

     add   eax, ecx

-    mov   ebp, eax                ; From now, ebp is pointed to permenent memory

+    mov   ebp, eax                ; From now, ebp is pointed to permanent memory

     

     pop   edx

     pop   ecx

diff --git a/CorebootModulePkg/SecCore/Ia32/Stack.nasm b/CorebootModulePkg/SecCore/Ia32/Stack.nasm
index f3362f6045..c04d2e08ac 100644
--- a/CorebootModulePkg/SecCore/Ia32/Stack.nasm
+++ b/CorebootModulePkg/SecCore/Ia32/Stack.nasm
@@ -64,7 +64,7 @@ ASM_PFX(SecSwitchStack):
     mov   esp,  eax                 ; From now, esp is pointed to permanent memory

 

     ;

-    ; Fixup the ebp point to permenent memory

+    ; Fixup the ebp point to permanent memory

     ;

     mov   eax,  ebp

     sub   eax,  ebx

diff --git a/CorebootModulePkg/SecCore/SecMain.c b/CorebootModulePkg/SecCore/SecMain.c
index 7ce0463d98..8d27a8f37b 100644
--- a/CorebootModulePkg/SecCore/SecMain.c
+++ b/CorebootModulePkg/SecCore/SecMain.c
@@ -1,5 +1,5 @@
 /** @file

-  C funtions in SEC

+  C functions in SEC

 

 Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>

 This program and the accompanying materials

@@ -57,7 +57,7 @@ SecStartupPhase2(
 

 

   @param SizeOfRam           Size of the temporary memory available for use.

-  @param TempRamBase         Base address of tempory ram

+  @param TempRamBase         Base address of temporary ram

   @param BootFirmwareVolume  Base address of the Boot Firmware Volume.

 **/

 VOID

@@ -100,7 +100,7 @@ SecStartup (
   // |-------------------|---->

   // |                   |

   // |                   |

-  // |      Heap         |    PeiTemporayRamSize

+  // |      Heap         |    PeiTemporaryRamSize

   // |                   |

   // |                   |

   // |-------------------|---->  TempRamBase

@@ -219,11 +219,11 @@ SecTemporaryRamSupport (
   // |-------------------|---->

   // |      Stack        |    PeiStackSize

   // |-------------------|---->

-  // |      Heap         |    PeiTemporayRamSize

+  // |      Heap         |    PeiTemporaryRamSize

   // |-------------------|---->  TempRamBase

   //

   // |-------------------|---->

-  // |      Heap         |    PeiTemporayRamSize

+  // |      Heap         |    PeiTemporaryRamSize

   // |-------------------|---->

   // |      Stack        |    PeiStackSize

   // |-------------------|---->  PermanentMemoryBase

@@ -276,8 +276,8 @@ SecTemporaryRamSupport (
 

   //

   // SecSwitchStack function must be invoked after the memory migration

-  // immediatly, also we need fixup the stack change caused by new call into

-  // permenent memory.

+  // immediately, also we need fixup the stack change caused by new call into

+  // permanent memory.

   //

   SecSwitchStack (

     (UINT32) (UINTN) OldStack,

diff --git a/CorebootModulePkg/SecCore/SecMain.h b/CorebootModulePkg/SecCore/SecMain.h
index 7bc991ab5f..77036b29ca 100644
--- a/CorebootModulePkg/SecCore/SecMain.h
+++ b/CorebootModulePkg/SecCore/SecMain.h
@@ -91,7 +91,7 @@ SecTemporaryRamSupport (
   the control is transferred to this function.

 

   @param SizeOfRam           Size of the temporary memory available for use.

-  @param TempRamBase         Base address of tempory ram

+  @param TempRamBase         Base address of temporary ram

   @param BootFirmwareVolume  Base address of the Boot Firmware Volume.

 **/

 VOID

@@ -105,7 +105,7 @@ SecStartup (
 /**

   Find and return Pei Core entry point.

 

-  It also find SEC and PEI Core file debug inforamtion. It will report them if

+  It also find SEC and PEI Core file debug information. It will report them if

   remote debug is enabled.

 

   @param  BootFirmwareVolumePtr  Point to the boot firmware volume.