summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMark Rutland <mark.rutland@arm.com>2016-05-06 18:19:08 +0100
committerArd Biesheuvel <ard.biesheuvel@linaro.org>2016-05-10 14:49:20 +0200
commite68449c9992fdb4d04c14b3db45393e358a618a6 (patch)
treeec9661e4ebb430c0af4db4056ae5ee60f777fee9
parent73683a2464e2f81b7b9dfb9b84b537290235bbe1 (diff)
downloadedk2-e68449c9992fdb4d04c14b3db45393e358a618a6.tar.gz
edk2-e68449c9992fdb4d04c14b3db45393e358a618a6.tar.bz2
edk2-e68449c9992fdb4d04c14b3db45393e358a618a6.zip
EmbeddedPkg/Lan9118Dxe: Use LAN9118 MMIO wrappers
Migrate the existing code to use the new LAN9118 MMIO wrappers, ensuring that timing requirements are respected. The newly redundant stalls will be removed in a subsequent patch. Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ryan Harkin <ryan.harkin@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-rw-r--r--EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c78
-rw-r--r--EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeHw.h4
-rw-r--r--EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c132
3 files changed, 107 insertions, 107 deletions
diff --git a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
index 50644e7b7d..bef34c2e9c 100644
--- a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
+++ b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
@@ -297,7 +297,7 @@ SnpInitialize (
}
// Read the PM register
- PmConf = MmioRead32 (LAN9118_PMT_CTRL);
+ PmConf = Lan9118MmioRead32 (LAN9118_PMT_CTRL);
// MPTCTRL_WOL_EN: Allow Wake-On-Lan to detect wake up frames or magic packets
// MPTCTRL_ED_EN: Allow energy detection to allow lowest power consumption mode
@@ -306,7 +306,7 @@ SnpInitialize (
PmConf |= (MPTCTRL_WOL_EN | MPTCTRL_ED_EN | MPTCTRL_PME_EN);
// Write the current configuration to the register
- MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
+ Lan9118MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
gBS->Stall (LAN9118_STALL);
gBS->Stall (LAN9118_STALL);
@@ -359,7 +359,7 @@ SnpInitialize (
}
// Now acknowledge all interrupts
- MmioWrite32 (LAN9118_INT_STS, ~0);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, ~0);
// Declare the driver as initialized
Snp->Mode->State = EfiSimpleNetworkInitialized;
@@ -422,7 +422,7 @@ SnpReset (
}
// Read the PM register
- PmConf = MmioRead32 (LAN9118_PMT_CTRL);
+ PmConf = Lan9118MmioRead32 (LAN9118_PMT_CTRL);
// MPTCTRL_WOL_EN: Allow Wake-On-Lan to detect wake up frames or magic packets
// MPTCTRL_ED_EN: Allow energy detection to allow lowest power consumption mode
@@ -430,7 +430,7 @@ SnpReset (
PmConf |= (MPTCTRL_WOL_EN | MPTCTRL_ED_EN | MPTCTRL_PME_EN);
// Write the current configuration to the register
- MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
+ Lan9118MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
gBS->Stall (LAN9118_STALL);
// Reactivate the LEDs
@@ -441,11 +441,11 @@ SnpReset (
// Check that a buffer size was specified in SnpInitialize
if (gTxBuffer != 0) {
- HwConf = MmioRead32 (LAN9118_HW_CFG); // Read the HW register
+ HwConf = Lan9118MmioRead32 (LAN9118_HW_CFG); // Read the HW register
HwConf &= ~HW_CFG_TX_FIFO_SIZE_MASK; // Clear buffer bits first
HwConf |= HW_CFG_TX_FIFO_SIZE(gTxBuffer); // assign size chosen in SnpInitialize
- MmioWrite32 (LAN9118_HW_CFG, HwConf); // Write the conf
+ Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf); // Write the conf
gBS->Stall (LAN9118_STALL);
}
@@ -454,7 +454,7 @@ SnpReset (
StartTx (START_TX_MAC | START_TX_CFG | START_TX_CLEAR, Snp);
// Now acknowledge all interrupts
- MmioWrite32 (LAN9118_INT_STS, ~0);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, ~0);
return EFI_SUCCESS;
}
@@ -996,12 +996,12 @@ SnpGetStatus (
// consumer of SNP does not call GetStatus.)
// TODO will we lose TxStatuses if this happens? Maybe in SnpTransmit we
// should check for it and dump the TX Status FIFO.
- FifoInt = MmioRead32 (LAN9118_FIFO_INT);
+ FifoInt = Lan9118MmioRead32 (LAN9118_FIFO_INT);
// Clear the TX Status FIFO Overflow
if ((FifoInt & INSTS_TXSO) == 0) {
FifoInt |= INSTS_TXSO;
- MmioWrite32 (LAN9118_FIFO_INT, FifoInt);
+ Lan9118MmioWrite32 (LAN9118_FIFO_INT, FifoInt);
}
// Read interrupt status if IrqStat is not NULL
@@ -1009,30 +1009,30 @@ SnpGetStatus (
*IrqStat = 0;
// Check for receive interrupt
- if (MmioRead32 (LAN9118_INT_STS) & INSTS_RSFL) { // Data moved from rx FIFO
+ if (Lan9118MmioRead32 (LAN9118_INT_STS) & INSTS_RSFL) { // Data moved from rx FIFO
*IrqStat |= EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT;
- MmioWrite32 (LAN9118_INT_STS,INSTS_RSFL);
+ Lan9118MmioWrite32 (LAN9118_INT_STS,INSTS_RSFL);
}
// Check for transmit interrupt
- if (MmioRead32 (LAN9118_INT_STS) & INSTS_TSFL) {
+ if (Lan9118MmioRead32 (LAN9118_INT_STS) & INSTS_TSFL) {
*IrqStat |= EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT;
- MmioWrite32 (LAN9118_INT_STS,INSTS_TSFL);
+ Lan9118MmioWrite32 (LAN9118_INT_STS,INSTS_TSFL);
}
// Check for software interrupt
- if (MmioRead32 (LAN9118_INT_STS) & INSTS_SW_INT) {
+ if (Lan9118MmioRead32 (LAN9118_INT_STS) & INSTS_SW_INT) {
*IrqStat |= EFI_SIMPLE_NETWORK_SOFTWARE_INTERRUPT;
- MmioWrite32 (LAN9118_INT_STS,INSTS_SW_INT);
+ Lan9118MmioWrite32 (LAN9118_INT_STS,INSTS_SW_INT);
}
}
// Check Status of transmitted packets
// (We ignore TXSTATUS_NO_CA has it might happen in Full Duplex)
- NumTxStatusEntries = MmioRead32(LAN9118_TX_FIFO_INF) & TXFIFOINF_TXSUSED_MASK;
+ NumTxStatusEntries = Lan9118MmioRead32(LAN9118_TX_FIFO_INF) & TXFIFOINF_TXSUSED_MASK;
if (NumTxStatusEntries > 0) {
- TxStatus = MmioRead32 (LAN9118_TX_STATUS);
+ TxStatus = Lan9118MmioRead32 (LAN9118_TX_STATUS);
PacketTag = TxStatus >> 16;
TxStatus = TxStatus & 0xFFFF;
if ((TxStatus & TXSTATUS_ES) && (TxStatus != (TXSTATUS_ES | TXSTATUS_NO_CA))) {
@@ -1063,7 +1063,7 @@ SnpGetStatus (
}
// Check for a TX Error interrupt
- Interrupts = MmioRead32 (LAN9118_INT_STS);
+ Interrupts = Lan9118MmioRead32 (LAN9118_INT_STS);
if (Interrupts & INSTS_TXE) {
DEBUG ((EFI_D_ERROR, "LAN9118: Transmitter error. Restarting..."));
@@ -1221,25 +1221,25 @@ SnpTransmit (
CommandB = TX_CMD_B_PACKET_TAG (PacketTag) | TX_CMD_B_PACKET_LENGTH (BuffSize);
// Write the commands first
- MmioWrite32 (LAN9118_TX_DATA, CommandA);
- MmioWrite32 (LAN9118_TX_DATA, CommandB);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandA);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandB);
// Write the destination address
- MmioWrite32 (LAN9118_TX_DATA,
+ Lan9118MmioWrite32 (LAN9118_TX_DATA,
(DstAddr->Addr[0]) |
(DstAddr->Addr[1] << 8) |
(DstAddr->Addr[2] << 16) |
(DstAddr->Addr[3] << 24)
);
- MmioWrite32 (LAN9118_TX_DATA,
+ Lan9118MmioWrite32 (LAN9118_TX_DATA,
(DstAddr->Addr[4]) |
(DstAddr->Addr[5] << 8) |
(SrcAddr->Addr[0] << 16) | // Write the Source Address
(SrcAddr->Addr[1] << 24)
);
- MmioWrite32 (LAN9118_TX_DATA,
+ Lan9118MmioWrite32 (LAN9118_TX_DATA,
(SrcAddr->Addr[2]) |
(SrcAddr->Addr[3] << 8) |
(SrcAddr->Addr[4] << 16) |
@@ -1247,18 +1247,18 @@ SnpTransmit (
);
// Write the Protocol
- MmioWrite32 (LAN9118_TX_DATA, (UINT32)(HTONS (LocalProtocol)));
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, (UINT32)(HTONS (LocalProtocol)));
// Next buffer is the payload
CommandA = TX_CMD_A_LAST_SEGMENT | TX_CMD_A_BUFF_SIZE (BuffSize - HdrSize) | TX_CMD_A_COMPLETION_INT | TX_CMD_A_DATA_START_OFFSET (2); // 2 bytes beginning offset
// Write the commands
- MmioWrite32 (LAN9118_TX_DATA, CommandA);
- MmioWrite32 (LAN9118_TX_DATA, CommandB);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandA);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandB);
// Write the payload
for (Count = 0; Count < ((BuffSize + 3) >> 2) - 3; Count++) {
- MmioWrite32 (LAN9118_TX_DATA, LocalData[Count + 3]);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, LocalData[Count + 3]);
}
} else {
// Format pointer
@@ -1269,12 +1269,12 @@ SnpTransmit (
CommandB = TX_CMD_B_PACKET_TAG (PacketTag) | TX_CMD_B_PACKET_LENGTH (BuffSize);
// Write the commands first
- MmioWrite32 (LAN9118_TX_DATA, CommandA);
- MmioWrite32 (LAN9118_TX_DATA, CommandB);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandA);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, CommandB);
// Write all the data
for (Count = 0; Count < ((BuffSize + 3) >> 2); Count++) {
- MmioWrite32 (LAN9118_TX_DATA, LocalData[Count]);
+ Lan9118MmioWrite32 (LAN9118_TX_DATA, LocalData[Count]);
}
}
@@ -1362,13 +1362,13 @@ SnpReceive (
// explain those errors has been found so far and everything seems to
// work perfectly when they are just ignored.
//
- IntSts = MmioRead32 (LAN9118_INT_STS);
+ IntSts = Lan9118MmioRead32 (LAN9118_INT_STS);
if ((IntSts & INSTS_RXE) && (!(IntSts & INSTS_RSFF))) {
- MmioWrite32 (LAN9118_INT_STS, INSTS_RXE);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, INSTS_RXE);
}
// Count dropped frames
- DroppedFrames = MmioRead32 (LAN9118_RX_DROP);
+ DroppedFrames = Lan9118MmioRead32 (LAN9118_RX_DROP);
LanDriver->Stats.RxDroppedFrames += DroppedFrames;
NumPackets = RxStatusUsedSpace (0, Snp) / 4;
@@ -1377,7 +1377,7 @@ SnpReceive (
}
// Read Rx Status (only if not empty)
- RxFifoStatus = MmioRead32 (LAN9118_RX_STATUS);
+ RxFifoStatus = Lan9118MmioRead32 (LAN9118_RX_STATUS);
LanDriver->Stats.RxTotalFrames += 1;
// First check for errors
@@ -1450,13 +1450,13 @@ SnpReceive (
// Set the amount of data to be transfered out of FIFO for THIS packet
// This can be used to trigger an interrupt, and status can be checked
- RxCfgValue = MmioRead32 (LAN9118_RX_CFG);
+ RxCfgValue = Lan9118MmioRead32 (LAN9118_RX_CFG);
RxCfgValue &= ~(RXCFG_RX_DMA_CNT_MASK);
RxCfgValue |= RXCFG_RX_DMA_CNT (ReadLimit);
// Set end alignment to 4-bytes
RxCfgValue &= ~(RXCFG_RX_END_ALIGN_MASK);
- MmioWrite32 (LAN9118_RX_CFG, RxCfgValue);
+ Lan9118MmioWrite32 (LAN9118_RX_CFG, RxCfgValue);
// Update buffer size
*BuffSize = PLength; // -4 bytes may be needed: Received in buffer as
@@ -1471,7 +1471,7 @@ SnpReceive (
// Read Rx Packet
for (Count = 0; Count < ReadLimit; Count++) {
- RawData[Count] = MmioRead32 (LAN9118_RX_DATA);
+ RawData[Count] = Lan9118MmioRead32 (LAN9118_RX_DATA);
}
// Get the destination address
@@ -1502,7 +1502,7 @@ SnpReceive (
}
// Check for Rx errors (worst possible error)
- if (MmioRead32 (LAN9118_INT_STS) & INSTS_RXE) {
+ if (Lan9118MmioRead32 (LAN9118_INT_STS) & INSTS_RXE) {
DEBUG ((EFI_D_WARN, "Warning: Receiver Error. Restarting...\n"));
// Software reset, the RXE interrupt is cleared by the reset.
diff --git a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeHw.h b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeHw.h
index 11895849a4..e44e2950a5 100644
--- a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeHw.h
+++ b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeHw.h
@@ -158,8 +158,8 @@
#define TXSTATUS_PTAG_MASK (0xFFFF0000) // Mask for Unique ID of packets (So we know who the packets are for)
// ID_REV register bits
-#define IDREV_ID ((MmioRead32(LAN9118_ID_REV) & 0xFFFF0000) >> 16)
-#define IDREV_REV (MmioRead32(LAN9118_ID_REV) & 0x0000FFFF)
+#define IDREV_ID ((Lan9118MmioRead32(LAN9118_ID_REV) & 0xFFFF0000) >> 16)
+#define IDREV_REV (Lan9118MmioRead32(LAN9118_ID_REV) & 0x0000FFFF)
// Interrupt Config Register bits
#define IRQCFG_IRQ_TYPE BIT0 // IRQ Buffer type
diff --git a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
index 002ea203ae..61f11b6e27 100644
--- a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
+++ b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
@@ -98,7 +98,7 @@ IndirectMACRead32 (
ASSERT(Index <= 12);
// Wait until CSR busy bit is cleared
- while ((MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
+ while ((Lan9118MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
// Set CSR busy bit to ensure read will occur
// Set the R/W bit to indicate we are reading
@@ -106,13 +106,13 @@ IndirectMACRead32 (
MacCSR = MAC_CSR_BUSY | MAC_CSR_READ | MAC_CSR_ADDR(Index);
// Write to the register
- MmioWrite32 (LAN9118_MAC_CSR_CMD, MacCSR);
+ Lan9118MmioWrite32 (LAN9118_MAC_CSR_CMD, MacCSR);
// Wait until CSR busy bit is cleared
- while ((MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
+ while ((Lan9118MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
// Now read from data register to get read value
- return MmioRead32 (LAN9118_MAC_CSR_DATA);
+ return Lan9118MmioRead32 (LAN9118_MAC_CSR_DATA);
}
/*
@@ -134,8 +134,8 @@ WaitDummyReads (
UINTN Count
)
{
- while (Count--)
- MmioRead32(LAN9118_BYTE_TEST);
+ while (Count--)
+ MmioRead32(LAN9118_BYTE_TEST);
}
UINT32
@@ -177,7 +177,7 @@ IndirectMACWrite32 (
ASSERT(Index <= 12);
// Wait until CSR busy bit is cleared
- while ((MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
+ while ((Lan9118MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
// Set CSR busy bit to ensure read will occur
// Set the R/W bit to indicate we are writing
@@ -185,13 +185,13 @@ IndirectMACWrite32 (
MacCSR = MAC_CSR_BUSY | MAC_CSR_WRITE | MAC_CSR_ADDR(Index);
// Now write the value to the register before issuing the write command
- ValueWritten = MmioWrite32 (LAN9118_MAC_CSR_DATA, Value);
+ ValueWritten = Lan9118MmioWrite32 (LAN9118_MAC_CSR_DATA, Value);
// Write the config to the register
- MmioWrite32 (LAN9118_MAC_CSR_CMD, MacCSR);
+ Lan9118MmioWrite32 (LAN9118_MAC_CSR_CMD, MacCSR);
// Wait until CSR busy bit is cleared
- while ((MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
+ while ((Lan9118MmioRead32 (LAN9118_MAC_CSR_CMD) & MAC_CSR_BUSY) == MAC_CSR_BUSY);
return ValueWritten;
}
@@ -283,23 +283,23 @@ IndirectEEPROMRead32 (
EepromCmd |= E2P_EPC_ADDRESS(Index);
// Write to Eeprom command register
- MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
+ Lan9118MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
gBS->Stall (LAN9118_STALL);
// Wait until operation has completed
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
// Check that operation didn't time out
- if (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_TIMEOUT) {
+ if (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_TIMEOUT) {
DEBUG ((EFI_D_ERROR, "EEPROM Operation Timed out: Read command on index %x\n",Index));
return 0;
}
// Wait until operation has completed
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
// Finally read the value
- return MmioRead32 (LAN9118_E2P_DATA);
+ return Lan9118MmioRead32 (LAN9118_E2P_DATA);
}
// Function to write to EEPROM memory
@@ -315,7 +315,7 @@ IndirectEEPROMWrite32 (
ValueWritten = 0;
// Read the EEPROM Command register
- EepromCmd = MmioRead32 (LAN9118_E2P_CMD);
+ EepromCmd = Lan9118MmioRead32 (LAN9118_E2P_CMD);
// Set the busy bit to ensure read will occur
EepromCmd |= ((UINT32)1 << 31);
@@ -328,23 +328,23 @@ IndirectEEPROMWrite32 (
EepromCmd |= (Index & 0xF);
// Write the value to the data register first
- ValueWritten = MmioWrite32 (LAN9118_E2P_DATA, Value);
+ ValueWritten = Lan9118MmioWrite32 (LAN9118_E2P_DATA, Value);
// Write to Eeprom command register
- MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
+ Lan9118MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
gBS->Stall (LAN9118_STALL);
// Wait until operation has completed
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
// Check that operation didn't time out
- if (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_TIMEOUT) {
+ if (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_TIMEOUT) {
DEBUG ((EFI_D_ERROR, "EEPROM Operation Timed out: Write command at memloc 0x%x, with value 0x%x\n",Index, Value));
return 0;
}
// Wait until operation has completed
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
return ValueWritten;
}
@@ -407,15 +407,15 @@ Lan9118Initialize (
UINT64 DefaultMacAddress;
// Attempt to wake-up the device if it is in a lower power state
- if (((MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_PM_MODE_MASK) >> 12) != 0) {
+ if (((Lan9118MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_PM_MODE_MASK) >> 12) != 0) {
DEBUG ((DEBUG_NET, "Waking from reduced power state.\n"));
- MmioWrite32 (LAN9118_BYTE_TEST, 0xFFFFFFFF);
+ Lan9118MmioWrite32 (LAN9118_BYTE_TEST, 0xFFFFFFFF);
gBS->Stall (LAN9118_STALL);
}
// Check that device is active
Retries = 20;
- while ((MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_READY) == 0 && --Retries) {
+ while ((Lan9118MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_READY) == 0 && --Retries) {
gBS->Stall (LAN9118_STALL);
}
if (!Retries) {
@@ -424,7 +424,7 @@ Lan9118Initialize (
// Check that EEPROM isn't active
Retries = 20;
- while ((MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY) && --Retries){
+ while ((Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY) && --Retries){
gBS->Stall (LAN9118_STALL);
}
if (!Retries) {
@@ -433,7 +433,7 @@ Lan9118Initialize (
// Check if a MAC address was loaded from EEPROM, and if it was, set it as the
// current address.
- if ((MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_MAC_ADDRESS_LOADED) == 0) {
+ if ((Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_MAC_ADDRESS_LOADED) == 0) {
DEBUG ((EFI_D_ERROR, "Warning: There was an error detecting EEPROM or loading the MAC Address.\n"));
// If we had an address before (set by StationAddess), continue to use it
@@ -453,9 +453,9 @@ Lan9118Initialize (
}
// Clear and acknowledge interrupts
- MmioWrite32 (LAN9118_INT_EN, 0);
- MmioWrite32 (LAN9118_IRQ_CFG, 0);
- MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
+ Lan9118MmioWrite32 (LAN9118_INT_EN, 0);
+ Lan9118MmioWrite32 (LAN9118_IRQ_CFG, 0);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
// Do self tests here?
@@ -482,7 +482,7 @@ SoftReset (
StopRx (STOP_RX_CLEAR, Snp); // Clear receiver FIFO
// Issue the reset
- HwConf = MmioRead32 (LAN9118_HW_CFG);
+ HwConf = Lan9118MmioRead32 (LAN9118_HW_CFG);
HwConf |= 1;
// Set the Must Be One (MBO) bit
@@ -491,14 +491,14 @@ SoftReset (
}
// Check that EEPROM isn't active
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
// Write the configuration
- MmioWrite32 (LAN9118_HW_CFG, HwConf);
+ Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf);
gBS->Stall (LAN9118_STALL);
// Wait for reset to complete
- while (MmioRead32 (LAN9118_HW_CFG) & HWCFG_SRST) {
+ while (Lan9118MmioRead32 (LAN9118_HW_CFG) & HWCFG_SRST) {
gBS->Stall (LAN9118_STALL);
ResetTime += 1;
@@ -511,15 +511,15 @@ SoftReset (
}
// Check that EEPROM isn't active
- while (MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
+ while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
// TODO we probably need to re-set the mac address here.
// Clear and acknowledge all interrupts
if (Flags & SOFT_RESET_CLEAR_INT) {
- MmioWrite32 (LAN9118_INT_EN, 0);
- MmioWrite32 (LAN9118_IRQ_CFG, 0);
- MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
+ Lan9118MmioWrite32 (LAN9118_INT_EN, 0);
+ Lan9118MmioWrite32 (LAN9118_IRQ_CFG, 0);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
}
// Do self tests here?
@@ -542,12 +542,12 @@ PhySoftReset (
// PMT PHY reset takes precedence over BCR
if (Flags & PHY_RESET_PMT) {
- PmtCtrl = MmioRead32 (LAN9118_PMT_CTRL);
+ PmtCtrl = Lan9118MmioRead32 (LAN9118_PMT_CTRL);
PmtCtrl |= MPTCTRL_PHY_RST;
- MmioWrite32 (LAN9118_PMT_CTRL,PmtCtrl);
+ Lan9118MmioWrite32 (LAN9118_PMT_CTRL,PmtCtrl);
// Wait for completion
- while (MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_PHY_RST) {
+ while (Lan9118MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_PHY_RST) {
gBS->Stall (LAN9118_STALL);
}
// PHY Basic Control Register reset
@@ -562,9 +562,9 @@ PhySoftReset (
// Clear and acknowledge all interrupts
if (Flags & PHY_SOFT_RESET_CLEAR_INT) {
- MmioWrite32 (LAN9118_INT_EN, 0);
- MmioWrite32 (LAN9118_IRQ_CFG, 0);
- MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
+ Lan9118MmioWrite32 (LAN9118_INT_EN, 0);
+ Lan9118MmioWrite32 (LAN9118_IRQ_CFG, 0);
+ Lan9118MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
}
return EFI_SUCCESS;
@@ -582,14 +582,14 @@ ConfigureHardware (
// Check if we want to use LEDs on GPIO
if (Flags & HW_CONF_USE_LEDS) {
- GpioConf = MmioRead32 (LAN9118_GPIO_CFG);
+ GpioConf = Lan9118MmioRead32 (LAN9118_GPIO_CFG);
// Enable GPIO as LEDs and Config as Push-Pull driver
GpioConf |= GPIO_GPIO0_PUSH_PULL | GPIO_GPIO1_PUSH_PULL | GPIO_GPIO2_PUSH_PULL |
GPIO_LED1_ENABLE | GPIO_LED2_ENABLE | GPIO_LED3_ENABLE;
// Write the configuration
- MmioWrite32 (LAN9118_GPIO_CFG, GpioConf);
+ Lan9118MmioWrite32 (LAN9118_GPIO_CFG, GpioConf);
gBS->Stall (LAN9118_STALL);
}
@@ -716,9 +716,9 @@ StopTx (
// Check if we want to clear tx
if (Flags & STOP_TX_CLEAR) {
- TxCfg = MmioRead32 (LAN9118_TX_CFG);
+ TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
TxCfg |= TXCFG_TXS_DUMP | TXCFG_TXD_DUMP;
- MmioWrite32 (LAN9118_TX_CFG, TxCfg);
+ Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
gBS->Stall (LAN9118_STALL);
}
@@ -733,15 +733,15 @@ StopTx (
}
if (Flags & STOP_TX_CFG) {
- TxCfg = MmioRead32 (LAN9118_TX_CFG);
+ TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
if (TxCfg & TXCFG_TX_ON) {
TxCfg |= TXCFG_STOP_TX;
- MmioWrite32 (LAN9118_TX_CFG, TxCfg);
+ Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
gBS->Stall (LAN9118_STALL);
// Wait for Tx to finish transmitting
- while (MmioRead32 (LAN9118_TX_CFG) & TXCFG_STOP_TX);
+ while (Lan9118MmioRead32 (LAN9118_TX_CFG) & TXCFG_STOP_TX);
}
}
@@ -770,12 +770,12 @@ StopRx (
// Check if we want to clear receiver FIFOs
if (Flags & STOP_RX_CLEAR) {
- RxCfg = MmioRead32 (LAN9118_RX_CFG);
+ RxCfg = Lan9118MmioRead32 (LAN9118_RX_CFG);
RxCfg |= RXCFG_RX_DUMP;
- MmioWrite32 (LAN9118_RX_CFG, RxCfg);
+ Lan9118MmioWrite32 (LAN9118_RX_CFG, RxCfg);
gBS->Stall (LAN9118_STALL);
- while (MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
+ while (Lan9118MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
}
return EFI_SUCCESS;
@@ -796,9 +796,9 @@ StartTx (
// Check if we want to clear tx
if (Flags & START_TX_CLEAR) {
- TxCfg = MmioRead32 (LAN9118_TX_CFG);
+ TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
TxCfg |= TXCFG_TXS_DUMP | TXCFG_TXD_DUMP;
- MmioWrite32 (LAN9118_TX_CFG, TxCfg);
+ Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
gBS->Stall (LAN9118_STALL);
}
@@ -815,11 +815,11 @@ StartTx (
// Check if tx was started from TX_CFG and enable if not
if (Flags & START_TX_CFG) {
- TxCfg = MmioRead32 (LAN9118_TX_CFG);
+ TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
gBS->Stall (LAN9118_STALL);
if ((TxCfg & TXCFG_TX_ON) == 0) {
TxCfg |= TXCFG_TX_ON;
- MmioWrite32 (LAN9118_TX_CFG, TxCfg);
+ Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
gBS->Stall (LAN9118_STALL);
}
}
@@ -847,12 +847,12 @@ StartRx (
if ((MacCsr & MACCR_RX_EN) == 0) {
// Check if we want to clear receiver FIFOs before starting
if (Flags & START_RX_CLEAR) {
- RxCfg = MmioRead32 (LAN9118_RX_CFG);
+ RxCfg = Lan9118MmioRead32 (LAN9118_RX_CFG);
RxCfg |= RXCFG_RX_DUMP;
- MmioWrite32 (LAN9118_RX_CFG, RxCfg);
+ Lan9118MmioWrite32 (LAN9118_RX_CFG, RxCfg);
gBS->Stall (LAN9118_STALL);
- while (MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
+ while (Lan9118MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
}
MacCsr |= MACCR_RX_EN;
@@ -874,7 +874,7 @@ TxDataFreeSpace (
UINT32 FreeSpace;
// Get the amount of free space from information register
- TxInf = MmioRead32 (LAN9118_TX_FIFO_INF);
+ TxInf = Lan9118MmioRead32 (LAN9118_TX_FIFO_INF);
FreeSpace = (TxInf & TXFIFOINF_TDFREE_MASK);
return FreeSpace; // Value in bytes
@@ -891,7 +891,7 @@ TxStatusUsedSpace (
UINT32 UsedSpace;
// Get the amount of used space from information register
- TxInf = MmioRead32 (LAN9118_TX_FIFO_INF);
+ TxInf = Lan9118MmioRead32 (LAN9118_TX_FIFO_INF);
UsedSpace = (TxInf & TXFIFOINF_TXSUSED_MASK) >> 16;
return UsedSpace << 2; // Value in bytes
@@ -908,7 +908,7 @@ RxDataUsedSpace (
UINT32 UsedSpace;
// Get the amount of used space from information register
- RxInf = MmioRead32 (LAN9118_RX_FIFO_INF);
+ RxInf = Lan9118MmioRead32 (LAN9118_RX_FIFO_INF);
UsedSpace = (RxInf & RXFIFOINF_RXDUSED_MASK);
return UsedSpace; // Value in bytes (rounded up to nearest DWORD)
@@ -925,7 +925,7 @@ RxStatusUsedSpace (
UINT32 UsedSpace;
// Get the amount of used space from information register
- RxInf = MmioRead32 (LAN9118_RX_FIFO_INF);
+ RxInf = Lan9118MmioRead32 (LAN9118_RX_FIFO_INF);
UsedSpace = (RxInf & RXFIFOINF_RXSUSED_MASK) >> 16;
return UsedSpace << 2; // Value in bytes
@@ -963,7 +963,7 @@ ChangeFifoAllocation (
// If we use the FIFOs (always use this first)
if (Flags & ALLOC_USE_FIFOS) {
// Read the current value of allocation
- HwConf = MmioRead32 (LAN9118_HW_CFG);
+ HwConf = Lan9118MmioRead32 (LAN9118_HW_CFG);
TxFifoOption = (HwConf >> 16) & 0xF;
// Choose the correct size (always use larger than requested if possible)
@@ -1046,7 +1046,7 @@ ChangeFifoAllocation (
// Clear and assign the new size option
HwConf &= ~(0xF0000);
HwConf |= ((TxFifoOption & 0xF) << 16);
- MmioWrite32 (LAN9118_HW_CFG, HwConf);
+ Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf);
gBS->Stall (LAN9118_STALL);
return EFI_SUCCESS;