ARM Packages: Fixed line endings

This large code change only modifies the line endings to be CRLF to be
compliant with the EDK2 coding convention document.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14088 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 184 insertions, 184 deletions

diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
index 7ccd09bd48..20e8882713 100644
--- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
+++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
@@ -1,184 +1,184 @@
-/** @file
-  Serial I/O Port library functions with no library constructor/destructor
-
-  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-  Copyright (c) 2012, ARM Ltd. All rights reserved.<BR>
-  
-  This program and the accompanying materials
-  are licensed and made available under the terms and conditions of the BSD License
-  which accompanies this distribution.  The full text of the license may be found at
-  http://opensource.org/licenses/bsd-license.php
-
-  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <Base.h>
-
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/SerialPortLib.h>
-#include <Library/SerialPortExtLib.h>
-
-#include <Drivers/PL011Uart.h>
-
-
-/**
-
-  Programmed hardware of Serial port.
-
-  @return    Always return RETURN_UNSUPPORTED.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortInitialize (
-  VOID
-  )
-{
-  return PL011UartInitializePort (
-      (UINTN)PcdGet64 (PcdSerialRegisterBase),
-      (UINTN)PcdGet64 (PcdUartDefaultBaudRate),
-      0, // Use the default value for Fifo depth
-      (EFI_PARITY_TYPE)PcdGet8 (PcdUartDefaultParity),
-      PcdGet8 (PcdUartDefaultDataBits),
-      (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits));
-}
-
-/**
-  Write data to serial device.
-
-  @param  Buffer           Point of data buffer which need to be written.
-  @param  NumberOfBytes    Number of output bytes which are cached in Buffer.
-
-  @retval 0                Write data failed.
-  @retval !0               Actual number of bytes written to serial device.
-
-**/
-UINTN
-EFIAPI
-SerialPortWrite (
-  IN UINT8     *Buffer,
-  IN UINTN     NumberOfBytes
-  )
-{
-  return PL011UartWrite ((UINTN)PcdGet64 (PcdSerialRegisterBase), Buffer, NumberOfBytes);
-}
-
-/**
-  Read data from serial device and save the data in buffer.
-
-  @param  Buffer           Point of data buffer which need to be written.
-  @param  NumberOfBytes    Number of output bytes which are cached in Buffer.
-
-  @retval 0                Read data failed.
-  @retval !0               Actual number of bytes read from serial device.
-
-**/
-UINTN
-EFIAPI
-SerialPortRead (
-  OUT UINT8     *Buffer,
-  IN  UINTN     NumberOfBytes
-)
-{
-  return PL011UartRead ((UINTN)PcdGet64 (PcdSerialRegisterBase), Buffer, NumberOfBytes);
-}
-
-/**
-  Check to see if any data is available to be read from the debug device.
-
-  @retval EFI_SUCCESS       At least one byte of data is available to be read
-  @retval EFI_NOT_READY     No data is available to be read
-  @retval EFI_DEVICE_ERROR  The serial device is not functioning properly
-
-**/
-BOOLEAN
-EFIAPI
-SerialPortPoll (
-  VOID
-  )
-{
-  return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));
-}
-
-/**
-  Set new attributes to PL011.
-
-  @param  BaudRate                The baud rate of the serial device. If the baud rate is not supported,
-                                  the speed will be reduced down to the nearest supported one and the
-                                  variable's value will be updated accordingly.
-  @param  ReceiveFifoDepth        The number of characters the device will buffer on input. If the specified
-                                  value is not supported, the variable's value will be reduced down to the
-                                  nearest supported one.
-  @param  Timeout                 If applicable, the number of microseconds the device will wait
-                                  before timing out a Read or a Write operation.
-  @param  Parity                  If applicable, this is the EFI_PARITY_TYPE that is computer or checked
-                                  as each character is transmitted or received. If the device does not
-                                  support parity, the value is the default parity value.
-  @param  DataBits                The number of data bits in each character
-  @param  StopBits                If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.
-                                  If the device does not support stop bits, the value is the default stop
-                                  bit value.
-
-  @retval EFI_SUCCESS             All attributes were set correctly on the serial device.
-  @retval EFI_INVALID_PARAMETERS  One or more of the attributes has an unsupported value.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetAttributes (
-  IN UINT64              BaudRate,
-  IN UINT32              ReceiveFifoDepth,
-  IN UINT32              Timeout,
-  IN EFI_PARITY_TYPE     Parity,
-  IN UINT8               DataBits,
-  IN EFI_STOP_BITS_TYPE  StopBits
-  )
-{
-  return PL011UartInitializePort (
-        (UINTN)PcdGet64 (PcdSerialRegisterBase),
-        BaudRate,
-        ReceiveFifoDepth,
-        Parity,
-        DataBits,
-        StopBits);
-}
-
-/**
-  Set the serial device control bits.
-
-  @param  Control                 Control bits which are to be set on the serial device.
-
-  @retval EFI_SUCCESS             The new control bits were set on the serial device.
-  @retval EFI_UNSUPPORTED         The serial device does not support this operation.
-  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetControl (
-  IN UINT32                  Control
-  )
-{
-  return PL011UartSetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
-}
-
-/**
-  Get the serial device control bits.
-
-  @param  Control                 Control signals read from the serial device.
-
-  @retval EFI_SUCCESS             The control bits were read from the serial device.
-  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortGetControl (
-  OUT UINT32                  *Control
-  )
-{
-  return PL011UartGetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
-}
+/** @file

+  Serial I/O Port library functions with no library constructor/destructor

+

+  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

+  Copyright (c) 2012, ARM Ltd. All rights reserved.<BR>

+  

+  This program and the accompanying materials

+  are licensed and made available under the terms and conditions of the BSD License

+  which accompanies this distribution.  The full text of the license may be found at

+  http://opensource.org/licenses/bsd-license.php

+

+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+

+**/

+

+#include <Base.h>

+

+#include <Library/IoLib.h>

+#include <Library/PcdLib.h>

+#include <Library/SerialPortLib.h>

+#include <Library/SerialPortExtLib.h>

+

+#include <Drivers/PL011Uart.h>

+

+

+/**

+

+  Programmed hardware of Serial port.

+

+  @return    Always return RETURN_UNSUPPORTED.

+

+**/

+RETURN_STATUS

+EFIAPI

+SerialPortInitialize (

+  VOID

+  )

+{

+  return PL011UartInitializePort (

+      (UINTN)PcdGet64 (PcdSerialRegisterBase),

+      (UINTN)PcdGet64 (PcdUartDefaultBaudRate),

+      0, // Use the default value for Fifo depth

+      (EFI_PARITY_TYPE)PcdGet8 (PcdUartDefaultParity),

+      PcdGet8 (PcdUartDefaultDataBits),

+      (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits));

+}

+

+/**

+  Write data to serial device.

+

+  @param  Buffer           Point of data buffer which need to be written.

+  @param  NumberOfBytes    Number of output bytes which are cached in Buffer.

+

+  @retval 0                Write data failed.

+  @retval !0               Actual number of bytes written to serial device.

+

+**/

+UINTN

+EFIAPI

+SerialPortWrite (

+  IN UINT8     *Buffer,

+  IN UINTN     NumberOfBytes

+  )

+{

+  return PL011UartWrite ((UINTN)PcdGet64 (PcdSerialRegisterBase), Buffer, NumberOfBytes);

+}

+

+/**

+  Read data from serial device and save the data in buffer.

+

+  @param  Buffer           Point of data buffer which need to be written.

+  @param  NumberOfBytes    Number of output bytes which are cached in Buffer.

+

+  @retval 0                Read data failed.

+  @retval !0               Actual number of bytes read from serial device.

+

+**/

+UINTN

+EFIAPI

+SerialPortRead (

+  OUT UINT8     *Buffer,

+  IN  UINTN     NumberOfBytes

+)

+{

+  return PL011UartRead ((UINTN)PcdGet64 (PcdSerialRegisterBase), Buffer, NumberOfBytes);

+}

+

+/**

+  Check to see if any data is available to be read from the debug device.

+

+  @retval EFI_SUCCESS       At least one byte of data is available to be read

+  @retval EFI_NOT_READY     No data is available to be read

+  @retval EFI_DEVICE_ERROR  The serial device is not functioning properly

+

+**/

+BOOLEAN

+EFIAPI

+SerialPortPoll (

+  VOID

+  )

+{

+  return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));

+}

+

+/**

+  Set new attributes to PL011.

+

+  @param  BaudRate                The baud rate of the serial device. If the baud rate is not supported,

+                                  the speed will be reduced down to the nearest supported one and the

+                                  variable's value will be updated accordingly.

+  @param  ReceiveFifoDepth        The number of characters the device will buffer on input. If the specified

+                                  value is not supported, the variable's value will be reduced down to the

+                                  nearest supported one.

+  @param  Timeout                 If applicable, the number of microseconds the device will wait

+                                  before timing out a Read or a Write operation.

+  @param  Parity                  If applicable, this is the EFI_PARITY_TYPE that is computer or checked

+                                  as each character is transmitted or received. If the device does not

+                                  support parity, the value is the default parity value.

+  @param  DataBits                The number of data bits in each character

+  @param  StopBits                If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.

+                                  If the device does not support stop bits, the value is the default stop

+                                  bit value.

+

+  @retval EFI_SUCCESS             All attributes were set correctly on the serial device.

+  @retval EFI_INVALID_PARAMETERS  One or more of the attributes has an unsupported value.

+

+**/

+RETURN_STATUS

+EFIAPI

+SerialPortSetAttributes (

+  IN UINT64              BaudRate,

+  IN UINT32              ReceiveFifoDepth,

+  IN UINT32              Timeout,

+  IN EFI_PARITY_TYPE     Parity,

+  IN UINT8               DataBits,

+  IN EFI_STOP_BITS_TYPE  StopBits

+  )

+{

+  return PL011UartInitializePort (

+        (UINTN)PcdGet64 (PcdSerialRegisterBase),

+        BaudRate,

+        ReceiveFifoDepth,

+        Parity,

+        DataBits,

+        StopBits);

+}

+

+/**

+  Set the serial device control bits.

+

+  @param  Control                 Control bits which are to be set on the serial device.

+

+  @retval EFI_SUCCESS             The new control bits were set on the serial device.

+  @retval EFI_UNSUPPORTED         The serial device does not support this operation.

+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.

+

+**/

+RETURN_STATUS

+EFIAPI

+SerialPortSetControl (

+  IN UINT32                  Control

+  )

+{

+  return PL011UartSetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);

+}

+

+/**

+  Get the serial device control bits.

+

+  @param  Control                 Control signals read from the serial device.

+

+  @retval EFI_SUCCESS             The control bits were read from the serial device.

+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.

+

+**/

+RETURN_STATUS

+EFIAPI

+SerialPortGetControl (

+  OUT UINT32                  *Control

+  )

+{

+  return PL011UartGetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);

+}