update MdePkg version to 1.01

update MdeModulePkg version to 0.90
update IntelFrameworkPkg version to 0.90
update IntelFrameworkModulePkg version to 0.90


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9021 6f19259b-4bc3-4df7-8a09-765794883524

2 files changed, 65 insertions, 65 deletions

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index cc009ce60e..0f0ebfcbd8 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -1,7 +1,7 @@
 ##  @file  MdeModulePkg.dec

 #

 # This package provides the modules that conform to EFI/PI Industry standards.

-# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) 

+# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)

 # and libraries instances, which are used for those modules.

 #

 # Copyright (c) 2007 - 2009, Intel Corporation.

@@ -22,7 +22,7 @@
   DEC_SPECIFICATION              = 0x00010005

   PACKAGE_NAME                   = MdeModulePkg

   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288

-  PACKAGE_VERSION                = 0.1

+  PACKAGE_VERSION                = 0.90

 

 [Includes.common]

   Include

@@ -32,35 +32,35 @@
   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.

   #   This library is only intended to be used by UEFI network stack modules.

   IpIoLib|Include/Library/IpIoLib.h

-  

+

   ##  @libraryclass  Basic function for UEFI network stack.

   #   This library is only intended to be used by UEFI network stack modules.

   NetLib|Include/Library/NetLib.h

-  

+

   ##  @libraryclass  The helper routines to access UDP service.

   #   This library is only intended to be used by UEFI network stack modules.

   UdpIoLib|Include/Library/UdpIoLib.h

-  

+

   ##  @libraryclass  Defines a set of methods to reset whole system.

   ResetSystemLib|Include/Library/ResetSystemLib.h

 

   ##  @libraryclass  Defines a set of methods related do S3 mode.

   S3Lib|Include/Library/S3Lib.h

-  

+

   ##  @libraryclass  Defines a set of methods related recovery mode.

   RecoveryLib|Include/Library/RecoveryLib.h

-  

+

   ##  @libraryclass  Provides HII related functions.

   HiiLib|Include/Library/HiiLib.h

-    

+

   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.

   CapsuleLib|Include/Library/CapsuleLib.h

-  

+

   ##  @libraryclass  Library for Deferred Procedure Calls.

   DpcLib|Include/Library/DpcLib.h

 

-  ##  @libraryclass    Provides global variables that are pointers 

-  ##  to the UEFI HII related protocols. 

+  ##  @libraryclass    Provides global variables that are pointers

+  ##  to the UEFI HII related protocols.

   ##

   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h

 

@@ -72,19 +72,19 @@
   ## Hob guid for Pcd DataBase

   ## Include/Guid/PcdDataBaseHobGuid.h

   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}

-  

+

   ## Guid for EDKII implementation GUIDed opcodes

   #  Include/Guid/MdeModuleHii.h

   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}

-  

+

   ## Guid for Framework vfr GUIDed opcodes.

   #  Include/Guid/MdeModuleHii.h

   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}

-  

+

   ## Guid to specify the System Non Volatile FV

   ## Include/Guid/SystemNvDataGuid.h

   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}

-  

+

   ## Guid specify the device is the console out device.

   ## Include/Guid/ConsoleOutDevice.h

   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

@@ -92,23 +92,23 @@
   ## Guid specify the device is the console in device.

   ## Include/Guid/ConsoleInDevice.h

   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

-  

+

   ## Hob and Variable guid specify the platform memory type information.

   ## Include/Guid/MemoryTypeInformation.h

   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}

-  

+

   ## Capsule update hob and variable guid

   ## Include/Guid/CapsuleVendor.h

   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}

-  

+

   ## Guid specifiy the device is the StdErr device.

   ## Include/Guid/StandardErrorDevice.h

   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

-  

+

   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.

   ## Include/Guid/VariableFormat.h

   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}

-  

+

   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID

   ## Include/Guid/Performance.h

   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}

@@ -120,13 +120,13 @@
   ## Include/Guid/NicIp4ConfigNvData.h

   gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}

 

-[Protocols.common] 

+[Protocols.common]

   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.

   ## Include/Protocol/LoadPe32Image.h

   ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.

   ## If developer need implement such functionality, they should use BasePeCoffLib.

   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}

-  

+

   ## Print protocol defines basic print functions to print the format unicode and ascii string.

   ## Include/Protocol/Print2.h

   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }

@@ -134,22 +134,22 @@
   ## This protocol defines the generic memory test interfaces in Dxe phase.

   ## Include/Protocol/GenericMemoryTest.h

   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}

-  

+

   ## Include/Protocol/Dpc.h

   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}

-  

+

   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.

   #  Include/Protocol/FaultTolerantWrite.h

   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}

-  

+

   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.

   #  Include/Protocol/SwapAddressRange.h

   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}

-  

+

 [PcdsFeatureFlag]

   ## Indicate whether platform can support update capsule across a system reset

   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d

- 

+

   ## This feature flag can be used to enable or disable all PCD PEIM services.

   #  If TRUE, all PCD PPI services will be produced.

   ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.

@@ -158,39 +158,39 @@
   ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.

   #  It can be disabled to save size.

   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037

-  

+

   ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.

   #  It can be disabled to save size.

   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038

-    

+

   ## If TRUE, enable the statistic functionality about variable usage. Such information is

   #  stored as a vendor configuration table into the EFI system table.

   #  If user wants to use VariableInfo application in MdeModulePkg\Application directory to get

-  #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can 

+  #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can

   #  not output useful info.

   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f

-  

+

   ## If TRUE, Unicode Collation Protocol will be installed.

   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040

-  

+

   ## If TRUE, Unicode Collation 2 Protocol will be installed.

   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041

-  

+

   ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.

   #  It could be set FALSE to save size.

   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042

-  

+

   ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.

   #  It could be set FALSE to save size.

   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043

-  

+

   ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.

   #  If TE section is not found, then PeiCore will search PE section.

   #  If FALSE, PeiCore will first search PE section from PEIM to load the image.

   #  This PCD is used to tune Pei phase performance to reduce the search image time.

   #  It can be set according to the generated image section type.

   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044

-  

+

   ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI

   #  interrupt to access usb device in the case of absence of usb stack.

   ##

@@ -199,17 +199,17 @@
   ## If TRUE, HiiImageProtocol will be installed.

   #  FALSE is for size reduction.

   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100

-  

+

   ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.

   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved

   #  from HII database.

   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200

 

-  ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. 

+  ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.

   #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.

   ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.

   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009

-  

+

   ##

   #  If TRUE, HelloWorld Application will print the verbose information.

   #  This PCD is a sample to explain FeatureFlag PCD usage.

@@ -227,7 +227,7 @@
   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c

 

 [PcdsFeatureFlag.IA32]

-  ## 

+  ##

   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.

   # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;

   # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.

@@ -243,10 +243,10 @@
   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f

 

   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress

-  #  to store PCD value. 

+  #  to store PCD value.

   #

   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010

-    

+

   ## Maximum number of FV is supported by PeiCore's dispatching.

   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030

 

@@ -258,21 +258,21 @@
 

   ## Maximum PPI count is supported by PeiCore's PPI database.

   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033

-  

+

   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize

   # The root cause is that variable driver will use FTW protocol to reclaim variable region.

   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not

-  # be reflushed through the manner of fault tolerant write. 

+  # be reflushed through the manner of fault tolerant write.

   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002

-  

+

   ## The maximum size of single common variable, that is non-HwErr type varible.

   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003

-  

+

   ## The maximum size of single hardware error record variable.

   # In IA32/X64 platforms, this value should be larger than 1KB.

   # In IA64 platforms, this value should be larger than 128KB.

   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004

-  

+

   ## The size of reserved HwErr variable space. This space is located at NV variable range.

   # HwErr type variable is stored with common non-volatile variables in NV region.

   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.

@@ -286,7 +286,7 @@
   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not

   # be reflushed through the manner of fault tolerant write.

   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014

-    

+

   ## Size of the FTW working block range.

   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011

 

@@ -299,34 +299,34 @@
 

   ## RTC Update Timeout Value

   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034

-  

+

 [PcdsPatchableInModule,PcdsDynamic]

   ##

   #  This PCD defines the Console output column and the default value is 25 according to UEFI spec

   ##

   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006

-  

+

   ##

   #  This PCD defines the Console output row and the default value is 80 according to UEFI spec

   ##

   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007

-  

+

 [PcdsFixedAtBuild,PcdsDynamic]

-  ## Base address of the NV variable range in flash device 

+  ## Base address of the NV variable range in flash device

   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001

-  

+

   ## Base address of the FTW spare block range in flash device.

-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 

-  

+  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013

+

   ## Base address of the FTW working block range in flash device.

-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 

-  

+  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010

+

   ##

   #  This PCD defines the print string.

   #  This PCD is a sample to explain String typed PCD usage.

   ##

-  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 

-  

+  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004

+

 [PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]

   ##

   #  This PCD defines the times to print hello world string.

@@ -335,22 +335,22 @@
   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005

 

   ## Indicate the max size of the populated capsule image that the platform can support.

-  #  The default max size is 100MB (0x6400000) for more than one large capsule images. 

+  #  The default max size is 100MB (0x6400000) for more than one large capsule images.

   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e

-  

+

   ## Indicate the max size of the non-populated capsule image that the platform can support.

   #  The default max size is 10MB (0xa00000) for the casule image without populated flag setting.

   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f

 

   ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table

   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050

-  

+

   ## Firmware revision that is default value filled into the EFI System Table

   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051

 

   ## Null-terminated Unicode string that described the firmware version

-  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052    

-  

+  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052

+

   ## Null-terminated Unicode string that contains the date the formware was released

   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053

 

diff --git a/MdeModulePkg/MdeModulePkg.dsc b/MdeModulePkg/MdeModulePkg.dsc
index 4086df002b..cd929259e6 100644
--- a/MdeModulePkg/MdeModulePkg.dsc
+++ b/MdeModulePkg/MdeModulePkg.dsc
@@ -16,7 +16,7 @@
 [Defines]

   PLATFORM_NAME                  = MdeModule

   PLATFORM_GUID                  = 587CE499-6CBE-43cd-94E2-186218569478

-  PLATFORM_VERSION               = 0.1

+  PLATFORM_VERSION               = 0.90

   DSC_SPECIFICATION              = 0x00010005

   OUTPUT_DIRECTORY               = Build/MdeModule

   SUPPORTED_ARCHITECTURES        = IA32|IPF|X64|EBC