diff options
-rw-r--r-- | OldMdePkg/Include/Library/PalCallLib.h | 4005 |
1 files changed, 3999 insertions, 6 deletions
diff --git a/OldMdePkg/Include/Library/PalCallLib.h b/OldMdePkg/Include/Library/PalCallLib.h index 8deb55a5bc..aefaebf55b 100644 --- a/OldMdePkg/Include/Library/PalCallLib.h +++ b/OldMdePkg/Include/Library/PalCallLib.h @@ -1,10 +1,11 @@ /** @file
PAL Call Services
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
+ Copyright (c) 2006 -2007, Intel Corporation All rights
+ reserved. This program and the accompanying materials are
+ licensed and made available under the terms and conditions of
+ the BSD License which accompanies this distribution. The full
+ text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
@@ -17,11 +18,4003 @@ #ifndef __PAL_CALL_LIB_H__
#define __PAL_CALL_LIB_H__
+//
+// CacheType of PAL_CACHE_FLUSH.
+//
+#define PAL_CACHE_FLUSH_INSTRUCTION_ALL 1
+#define PAL_CACHE_FLUSH_DATA_ALL 2
+#define PAL_CACHE_FLUSH_ALL 3
+#define PAL_CACHE_FLUSH_SYNC_TO_DATA 4
+
+
+//
+// Bitmask of Opearation of PAL_CACHE_FLUSH.
+//
+#define PAL_CACHE_FLUSH_INVIDED_LINES BIT0
+#define PAL_CACHE_FLUSH_PROBE_INTERRUPT BIT1
+
+/**
+
+ PAL Procedure - PAL_CACHE_FLUSH.
+
+ Flush the instruction or data caches. It is required by IPF.
+ The PAL procedure supports the Static Registers calling
+ convention. It could be called at virtual mode and physical
+ mode.
+
+ @param Index Index of PAL_CACHE_FLUSH within the
+ list of PAL procedures.
+
+ @param CacheType Unsigned 64-bit integer indicating
+ which cache to flush.
+
+ @param Operation Formatted bit vector indicating the
+ operation of this call.
+
+ @param ProgressIndicator Unsigned 64-bit integer specifying
+ the starting position of the flush
+ operation.
+
+ @return R9 Unsigned 64-bit integer specifying the vector
+ number of the pending interrupt.
+
+ @return R10 Unsigned 64-bit integer specifying the
+ starting position of the flush operation.
+
+ @return R11 Unsigned 64-bit integer specifying the vector
+ number of the pending interrupt.
+
+ @return Status 2 - Call completed without error, but a PMI
+ was taken during the execution of this
+ procedure.
+
+ @return Status 1 - Call has not completed flushing due to
+ a pending interrupt.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error
+
+**/
+#define PAL_CACHE_FLUSH 1
+
+
+//
+// Attributes of PAL_CACHE_CONFIG_INFO1
+//
+#define PAL_CACHE_ATTR_WT 0
+#define PAL_CACHE_ATTR_WB 1
+
+//
+// PAL_CACHE_CONFIG_INFO1.StoreHint
+//
+#define PAL_CACHE_STORE_TEMPORAL 0
+#define PAL_CACHE_STORE_NONE_TEMPORAL 3
+
+//
+// PAL_CACHE_CONFIG_INFO1.StoreHint
+//
+#define PAL_CACHE_STORE_TEMPORAL_LVL_1 0
+#define PAL_CACHE_STORE_NONE_TEMPORAL_LVL_ALL 3
+
+//
+// PAL_CACHE_CONFIG_INFO1.StoreHint
+//
+#define PAL_CACHE_LOAD_TEMPORAL_LVL_1 0
+#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_1 1
+#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_ALL 3
+
+//
+// Detail the characteristics of a given processor controlled
+// cache in the cache hierarchy.
+//
+typedef struct {
+ UINT64 IsUnified : 1;
+ UINT64 Attributes : 2;
+ UINT64 Associativity:8;
+ UINT64 LineSize:8;
+ UINT64 Stride:8;
+ UINT64 StoreLatency:8;
+ UINT64 StoreHint:8;
+ UINT64 LoadHint:8;
+} PAL_CACHE_INFO_RETURN1;
+
+//
+// Detail the characteristics of a given processor controlled
+// cache in the cache hierarchy.
+//
+typedef struct {
+ UINT64 CacheSize:32;
+ UINT64 AliasBoundary:8;
+ UINT64 TagLsBits:8;
+ UINT64 TagMsBits:8;
+} PAL_CACHE_INFO_RETURN2;
+
+/**
+
+ PAL Procedure - PAL_CACHE_INFO.
+
+ Return detailed instruction or data cache information. It is
+ required by IPF. The PAL procedure supports the Static
+ Registers calling convention. It could be called at virtual
+ mode and physical mode.
+
+ @param Index Index of PAL_CACHE_INFO within the list of
+ PAL procedures.
+
+ @param CacheLevel Unsigned 64-bit integer specifying the
+ level in the cache hierarchy for which
+ information is requested. This value must
+ be between 0 and one less than the value
+ returned in the cache_levels return value
+ from PAL_CACHE_SUMMARY.
+
+ @param CacheType Unsigned 64-bit integer with a value of 1
+ for instruction cache and 2 for data or
+ unified cache. All other values are
+ reserved.
+
+ @param Reserved Should be 0.
+
+
+ @return R9 Detail the characteristics of a given
+ processor controlled cache in the cache
+ hierarchy. See PAL_CACHE_INFO_RETURN1.
+
+ @return R10 Detail the characteristics of a given
+ processor controlled cache in the cache
+ hierarchy. See PAL_CACHE_INFO_RETURN2.
+
+ @return R11 Reserved with 0.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error
+
+**/
+#define PAL_CACHE_INFO 2
+
+
+
+//
+// Level of PAL_CACHE_INIT.
+//
+#define PAL_CACHE_INIT_ALL 0xffffffffffffffffULL
+
+//
+// Restrict of PAL_CACHE_INIT.
+//
+#define PAL_CACHE_INIT_NO_RESTRICT 0
+#define PAL_CACHE_INIT_RESTRICTED 1
+
+/**
+
+ PAL Procedure - PAL_CACHE_INIT.
+
+ Initialize the instruction or data caches. It is required by
+ IPF. The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode.
+
+ @param Index Index of PAL_CACHE_INIT within the list of PAL
+ procedures.
+
+ @param Level Unsigned 64-bit integer containing the level of
+ cache to initialize. If the cache level can be
+ initialized independently, only that level will
+ be initialized. Otherwise
+ implementation-dependent side-effects will
+ occur.
+
+ @param CacheType Unsigned 64-bit integer with a value of 1 to
+ initialize the instruction cache, 2 to
+ initialize the data cache, or 3 to
+ initialize both. All other values are
+ reserved.
+
+ @param Restrict Unsigned 64-bit integer with a value of 0 or
+ 1. All other values are reserved. If
+ restrict is 1 and initializing the specified
+ level and cache_type of the cache would
+ cause side-effects, PAL_CACHE_INIT will
+ return -4 instead of initializing the cache.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -4 - Call could not initialize the specified
+ level and cache_type of the cache without
+ side-effects and restrict was 1.
+
+**/
+#define PAL_CACHE_INIT 3
+
+
+//
+// PAL_CACHE_PROTECTION.Method.
+//
+#define PAL_CACHE_PROTECTION_NONE_PROTECT 0
+#define PAL_CACHE_PROTECTION_ODD_PROTECT 1
+#define PAL_CACHE_PROTECTION_EVEN_PROTECT 2
+#define PAL_CACHE_PROTECTION_ECC_PROTECT 3
+
+
+
+//
+// PAL_CACHE_PROTECTION.TagOrData.
+//
+#define PAL_CACHE_PROTECTION_PROTECT_DATA 0
+#define PAL_CACHE_PROTECTION_PROTECT_TAG 1
+#define PAL_CACHE_PROTECTION_PROTECT_TAG_ANDTHEN_DATA 2
+#define PAL_CACHE_PROTECTION_PROTECT_DATA_ANDTHEN_TAG 3
+
+//
+// 32-bit protection information structures.
+//
+typedef struct {
+ UINT32 DataBits:8;
+ UINT32 TagProtLsb:6;
+ UINT32 TagProtMsb:6;
+ UINT32 ProtBits:6;
+ UINT32 Method:4;
+ UINT32 TagOrData:2;
+} PAL_CACHE_PROTECTION;
+
+/**
+
+ PAL Procedure - PAL_CACHE_PROT_INFO.
+
+ Return instruction or data cache protection information. It is
+ required by IPF. The PAL procedure supports the Static
+ Registers calling convention. It could be called at physical
+ mode and Virtual mode.
+
+ @param Index Index of PAL_CACHE_PROT_INFO within the list of
+ PAL procedures.
+
+ @param CacheLevel Unsigned 64-bit integer specifying the level
+ in the cache hierarchy for which information
+ is requested. This value must be between 0
+ and one less than the value returned in the
+ cache_levels return value from
+ PAL_CACHE_SUMMARY.
+
+ @param CacheType Unsigned 64-bit integer with a value of 1
+ for instruction cache and 2 for data or
+ unified cache. All other values are
+ reserved.
+
+ @return R9 Detail the characteristics of a given
+ processor controlled cache in the cache
+ hierarchy. See PAL_CACHE_PROTECTION[0..1].
+
+ @return R10 Detail the characteristics of a given
+ processor controlled cache in the cache
+ hierarchy. See PAL_CACHE_PROTECTION[2..3].
+
+ @return R11 Detail the characteristics of a given
+ processor controlled cache in the cache
+ hierarchy. See PAL_CACHE_PROTECTION[4..5].
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_CACHE_PROT_INFO 38
+
+/**
+
+ @param ThreadId The thread identifier of the logical
+ processor for which information is being
+ returned. This value will be unique on a per
+ core basis.
+
+ @param CoreId The core identifier of the logical processor
+ for which information is being returned.
+ This value will be unique on a per physical
+ processor package basis.
+
+**/
+typedef struct {
+ UINT64 ThreadId : 16;
+ UINT64 Reserved1: 16;
+ UINT64 CoreId: 16;
+ UINT64 Reserved2: 16;
+} PAL_PCOC_N_CACHE_INFO1;
+
+/**
+
+ @param LogicalAddress Logical address: geographical address
+ of the logical processor for which
+ information is being returned. This is
+ the same value that is returned by the
+ PAL_FIXED_ADDR procedure when it is
+ called on the logical processor.
+
+**/
+typedef struct {
+ UINT64 LogicalAddress : 16;
+ UINT64 Reserved1: 16;
+ UINT64 Reserved2: 32;
+} PAL_PCOC_N_CACHE_INFO2;
+
+/**
+
+ PAL Procedure - PAL_CACHE_SHARED_INFO.
+
+ Returns information on which logical processors share caches.
+ It is optional. The PAL procedure supports the Static
+ Registers calling convention. It could be called at physical
+ mode and Virtual mode.
+
+ @param Index Index of PAL_CACHE_SHARED_INFO within the list
+ of PAL procedures.
+
+ @param CacheLevel Unsigned 64-bit integer specifying the
+ level in the cache hierarchy for which
+ information is requested. This value must
+ be between 0 and one less than the value
+ returned in the cache_levels return value
+ from PAL_CACHE_SUMMARY.
+
+ @param CacheType Unsigned 64-bit integer with a value of 1
+ for instruction cache and 2 for data or
+ unified cache. All other values are
+ reserved.
+
+ @param ProcNumber Unsigned 64-bit integer that specifies for
+ which logical processor information is
+ being requested. This input argument must
+ be zero for the first call to this
+ procedure and can be a maximum value of
+ one less than the number of logical
+ processors sharing this cache, which is
+ returned by the num_shared return value.
+
+ @return R9 Unsigned integer that returns the number of
+ logical processors that share the processor
+ cache level and type, for which information was
+ requested.
+
+ @return R10 The format of PAL_PCOC_N_CACHE_INFO1.
+
+ @return R11 The format of PAL_PCOC_N_CACHE_INFO2.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_CACHE_SHARED_INFO 43
+
+
+/**
+
+ PAL Procedure - PAL_CACHE_SUMMARY.
+
+ Return a summary of the cache hierarchy. It is required by
+ IPF. The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode and Virtual
+ mode.
+
+ @param Index Index of PAL_CACHE_SUMMARY within the list of
+ PAL procedures.
+
+
+ @return R9 CacheLevels Unsigned 64-bit integer denoting the
+ number of levels of cache
+ implemented by the processor.
+ Strictly, this is the number of
+ levels for which the cache
+ controller is integrated into the
+ processor (the cache SRAMs may be
+ external to the processor).
+
+ @return R10 UniqueCaches Unsigned 64-bit integer denoting the
+ number of unique caches implemented
+ by the processor. This has a maximum
+ of 2*cache_levels, but may be less
+ if any of the levels in the cache
+ hierarchy are unified caches or do
+ not have both instruction and data
+ caches.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_CACHE_SUMMARY 4
+
+
+//
+// Virtual Memory Attributes implemented by processor.
+//
+#define PAL_MEMORY_ATTR_WB 0
+#define PAL_MEMORY_ATTR_WC 6
+#define PAL_MEMORY_ATTR_UC 4
+#define PAL_MEMORY_ATTR_UCE 5
+#define PAL_MEMORY_ATTR_NATPAGE 7
+
+/**
+
+ PAL Procedure - PAL_MEM_ATTRIB.
+
+ Return a list of supported memory attributes.. It is required
+ by IPF. The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode and Virtual
+ mode.
+
+ @param Index Index of PAL_MEM_ATTRIB within the list of PAL
+ procedures.
+
+
+ @return R9 Attributes 8-bit vector of memory attributes
+ implemented by processor. See Virtual
+ Memory Attributes above.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+
+#define PAL_MEM_ATTRIB 5
+
+/**
+
+ PAL Procedure - PAL_PREFETCH_VISIBILITY.
+
+ Used in architected sequence to transition pages from a
+ cacheable, speculative attribute to an uncacheable attribute.
+ It is required by IPF. The PAL procedure supports the Static
+ Registers calling convention. It could be called at physical
+ mode and Virtual mode.
+
+ @param Index Index of PAL_PREFETCH_VISIBILITY within the list
+ of PAL procedures.
+
+ @param TransitionType Unsigned integer specifying the type
+ of memory attribute transition that is
+ being performed.
+
+ @return Status 1 Call completed without error; this
+ call is not necessary on remote
+ processors.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_PREFETCH_VISIBILITY 41
+
+/**
+
+ PAL Procedure - PAL_PTCE_INFO.
+
+ Return information needed for ptc.e instruction to purge
+ entire TC. It is required by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called at
+ physical mode and Virtual mode.
+
+ @param Index Index of PAL_PTCE_INFO within the list
+ of PAL procedures.
+
+ @return R9 Unsigned 64-bit integer denoting the beginning
+ address to be used by the first PTCE instruction
+ in the purge loop.
+
+ @return R10 Two unsigned 32-bit integers denoting the loop
+ counts of the outer (loop 1) and inner (loop 2)
+ purge loops. count1 (loop 1) is contained in bits
+ 63:32 of the parameter, and count2 (loop 2) is
+ contained in bits 31:0 of the parameter.
+
+ @return R11 Two unsigned 32-bit integers denoting the loop
+ strides of the outer (loop 1) and inner (loop 2)
+ purge loops. stride1 (loop 1) is contained in bits
+ 63:32 of the parameter, and stride2 (loop 2) is
+ contained in bits 31:0 of the parameter.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_PTCE_INFO 6
+
+
+
+/**
+
+ @param NumberSets Unsigned 8-bit integer denoting the number
+ of hash sets for the specified level
+ (1=fully associative)
+
+ @param NumberWays Unsigned 8-bit integer denoting the
+ associativity of the specified level
+ (1=direct).
+
+ @param NumberEntries Unsigned 16-bit integer denoting the
+ number of entries in the specified TC.
+
+
+ @param PageSizeIsOptimized Flag denoting whether the
+ specified level is optimized for
+ the region's preferred page size
+ (1=optimized) tc_pages indicates
+ which page sizes are usable by
+ this translation cache.
+
+ @param TcIsUnified Flag denoting whether the specified TC is
+ unified (1=unified).
+
+ @param EntriesReduction Flag denoting whether installed
+ translation registers will reduce
+ the number of entries within the
+ specified TC.
+
+**/
+typedef struct {
+ UINT64 NumberSets:8;
+ UINT64 NumberWays:8;
+ UINT64 NumberEntries:16;
+ UINT64 PageSizeIsOptimized:1;
+ UINT64 TcIsUnified:1;
+ UINT64 EntriesReduction:1;
+} PAL_TC_INFO;
+
+/**
+
+ PAL Procedure - PAL_VM_INFO.
+
+ Return detailed information about virtual memory features
+ supported in the processor. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and Virtual mode.
+
+ @param Index Index of PAL_VM_INFO within the list
+ of PAL procedures.
+
+ @param TcLevel Unsigned 64-bit integer specifying the level
+ in the TLB hierarchy for which information is
+ required. This value must be between 0 and one
+ less than the value returned in the
+ vm_info_1.num_tc_levels return value from
+ PAL_VM_SUMMARY.
+
+ @param TcType Unsigned 64-bit integer with a value of 1 for
+ instruction translation cache and 2 for data
+ or unified translation cache. All other values
+ are reserved.
+
+ @return R9 8-byte formatted value returning information
+ about the specified TC. See PAL_TC_INFO above.
+
+ @return R10 64-bit vector containing a bit for each page
+ size supported in the specified TC, where bit
+ position n indicates a page size of 2**n.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_VM_INFO 7
+
+
+/**
+
+ PAL Procedure - PAL_VM_PAGE_SIZE.
+
+ Return virtual memory TC and hardware walker page sizes
+ supported in the processor. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and Virtual mode.
+
+ @param Index Index of PAL_VM_PAGE_SIZE within the list
+ of PAL procedures.
+
+
+ @return R9 64-bit vector containing a bit for each
+ architected page size that is supported for
+ TLB insertions and region registers.
+
+ @return R10 64-bit vector containing a bit for each
+ architected page size supported for TLB purge
+ operations.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_VM_PAGE_SIZE 34
+
+/**
+
+ @param WalkerPresent 1-bit flag indicating whether a hardware
+ TLB walker is implemented (1 = walker
+ present).
+
+ @param WidthOfPhysicalAddress Unsigned 7-bit integer
+ denoting the number of bits of
+ physical address implemented.
+
+ @param WidthOfKey Unsigned 8-bit integer denoting the number
+ of bits mplemented in the PKR.key field.
+
+ @param MaxPkrIndex Unsigned 8-bit integer denoting the
+ maximum PKR index (number of PKRs-1).
+
+ @param HashTagId Unsigned 8-bit integer which uniquely
+ identifies the processor hash and tag
+ algorithm.
+
+ @param MaxDtrIndex Unsigned 8 bit integer denoting the
+ maximum data translation register index
+ (number of dtr entries - 1).
+
+ @param MaxItrIndex Unsigned 8 bit integer denoting the
+ maximum instruction translation register
+ index (number of itr entries - 1).
+
+ @param NumberOfUniqueTc Unsigned 8-bit integer denoting the
+ number of unique TCs implemented.
+ This is a maximum of
+ 2*num_tc_levels.
+
+ @param NumberOfTcLevels Unsigned 8-bit integer denoting the
+ number of TC levels.
+
+**/
+typedef struct {
+ UINT64 WalkerPresent:1;
+ UINT64 WidthOfPhysicalAddress: 7;
+ UINT64 WidthOfKey:8;
+ UINT64 MaxPkrIndex:8;
+ UINT64 HashTagId:8;
+ UINT64 MaxDtrIndex:8;
+ UINT64 MaxItrIndex:8;
+ UINT64 NumberOfUniqueTc:8;
+ UINT64 NumberOfTcLevels:8;
+} PAL_VM_INFO1;
+
+/**
+
+ @param WidthOfVirtualAddress Unsigned 8-bit integer denoting
+ is the total number of virtual
+ address bits - 1.
+
+ @param WidthOfRid Unsigned 8-bit integer denoting the number
+ of bits implemented in the RR.rid field.
+
+ @param MaxPurgedTlbs Unsigned 16 bit integer denoting the
+ maximum number of concurrent outstanding
+ TLB purges allowed by the processor. A
+ value of 0 indicates one outstanding
+ purge allowed. A value of 216-1
+ indicates no limit on outstanding
+ purges. All other values indicate the
+ actual number of concurrent outstanding
+ purges allowed.
+
+**/
+typedef struct {
+ UINT64 WidthOfVirtualAddress:8;
+ UINT64 WidthOfRid:8;
+ UINT64 MaxPurgedTlbs:16;
+ UINT64 Reserved:32;
+} PAL_VM_INFO2;
+
+/**
+
+ PAL Procedure - PAL_VM_SUMMARY.
+
+ Return summary information about virtual memory features
+ supported in the processor. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and Virtual mode.
+
+ @param Index Index of PAL_VM_SUMMARY within the list
+ of PAL procedures.
+
+
+ @return R9 8-byte formatted value returning global virtual
+ memory information. See PAL_VM_INFO1 above.
+
+ @return R10 8-byte formatted value returning global virtual
+ memory information. See PAL_VM_INFO2 above.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_VM_SUMMARY 8
+
+
+//
+// Bit mask of TR_valid flag.
+//
+#define PAL_TR_ACCESS_RIGHT_IS_VALID BIT0
+#define PAL_TR_PRIVILEGE_LEVEL_IS_VALID BIT1
+#define PAL_TR_DIRTY_IS_VALID BIT2
+#define PAL_TR_MEMORY_ATTR_IS_VALID BIT3
+
+
+/**
+
+ PAL Procedure - PAL_VM_TR_READ.
+
+ Read contents of a translation register. It is required by
+ IPF. The PAL procedure supports the Stacked Register calling
+ convention. It could be called at physical mode.
+
+ @param Index Index of PAL_VM_TR_READ within the list
+ of PAL procedures.
+
+ @param RegNumber Unsigned 64-bit number denoting which TR to
+ read.
+
+ @param TrType Unsigned 64-bit number denoting whether to
+ read an ITR (0) or DTR (1). All other values
+ are reserved.
+
+ @param TrBuffer 64-bit pointer to the 32-byte memory buffer in
+ which translation data is returned.
+
+ @return R9 Formatted bit vector denoting which fields are
+ valid. See TR_valid above.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_VM_TR_READ 261
+
+
+
+
+//
+// Bit Mask of Processor Bus Fesatures .
+//
+
+/**
+
+ When 0, bus data errors are detected and single bit errors are
+ corrected. When 1, no error detection or correction is done.
+
+**/
+#define PAL_BUS_DISABLE_DATA_ERROR_SIGNALLING BIT63
+
+
+/**
+
+ When 0, bus address errors are signalled on the bus. When 1,
+ no bus errors are signalled on the bus. If Disable Bus Address
+ Error Checking is 1, this bit is ignored.
+
+**/
+#define PAL_BUS_DISABLE_ADDRESS_ERROR_SIGNALLING BIT62
+
+
+
+
+/**
+
+ When 0, bus errors are detected, single bit errors are
+ corrected., and a CMCI or MCA is generated internally to the
+ processor. When 1, no bus address errors are detected or
+ corrected.
+
+**/
+#define PAL_BUS_DISABLE_ADDRESS_ERROR_CHECK BIT61
+
+
+/**
+
+ When 0, bus protocol errors (BINIT#) are signaled by the
+ processor on the bus. When 1, bus protocol errors (BINIT#) are
+ not signaled on the bus. If Disable Bus Initialization Event
+ Checking is 1, this bit is ignored.
+
+**/
+#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_SIGNALLING BIT60
+
+
+/**
+
+ When 0, bus protocol errors (BINIT#) are detected and sampled
+ and an MCA is generated internally to the processor. When 1,
+ the processor will ignore bus protocol error conditions
+ (BINIT#).
+
+**/
+#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_CHECK BIT59
+
+
+
+/**
+
+ When 0, BERR# is signalled if a bus error is detected. When 1,
+ bus errors are not signalled on the bus.
+
+**/
+#define PAL_BUS_DISABLE_ERROR_SIGNALLING BIT58
+
+
+
+
+/**
+
+ When 0, BERR# is signalled when internal processor requestor
+ initiated bus errors are detected. When 1, internal requester
+ bus errors are not signalled on the bus.
+
+**/
+#define PAL_BUS_DISABLE__INTERNAL_ERROR_SIGNALLING BIT57
+
+
+/**
+
+ When 0, the processor takes an MCA if BERR# is asserted. When
+ 1, the processor ignores the BERR# signal.
+
+**/
+#define PAL_BUS_DISABLE_ERROR_CHECK BIT56
+
+
+/**
+
+ When 0, the processor asserts BINIT# if it detects a parity
+ error on the signals which identify the transactions to which
+ this is a response. When 1, the processor ignores parity on
+ these signals.
+
+**/
+#define PAL_BUS_DISABLE_RSP_ERROR_CHECK BIT55
+
+
+/**
+
+ When 0, the in-order transaction queue is limited only by the
+ number of hardware entries. When 1, the processor's in-order
+ transactions queue is limited to one entry.
+
+**/
+#define PAL_BUS_DISABLE_TRANSACTION_QUEUE BIT54
+
+/**
+
+ Enable a bus cache line replacement transaction when a cache
+ line in the exclusive state is replaced from the highest level
+ processor cache and is not present in the lower level processor
+ caches. When 0, no bus cache line replacement transaction will
+ be seen on the bus. When 1, bus cache line replacement
+ transactions will be seen on the bus when the above condition is
+ detected.
+
+**/
+#define PAL_BUS_ENABLE_EXCLUSIVE_CACHE_LINE_REPLACEMENT BIT53
+
+
+/**
+
+ Enable a bus cache line replacement transaction when a cache
+ line in the shared or exclusive state is replaced from the
+ highest level processor cache and is not present in the lower
+ level processor caches.
+ When 0, no bus cache line replacement transaction will be seen
+ on the bus. When 1, bus cache line replacement transactions
+ will be seen on the bus when the above condition is detected.
+
+**/
+#define PAL_BUS_ENABLE_SHARED_CACHE_LINE_REPLACEMENT BIT52
+
+
+
+/**
+
+ When 0, the data bus is configured at the 2x data transfer
+ rate.When 1, the data bus is configured at the 1x data
+ transfer rate, 30 Opt. Req. Disable Bus Lock Mask. When 0, the
+ processor executes locked transactions atomically. When 1, the
+ processor masks the bus lock signal and executes locked
+ transactions as a non-atomic series of transactions.
+
+**/
+#define PAL_BUS_ENABLE_HALF_TRANSFER BIT30
+
+/**
+
+ When 0, the processor will deassert bus request when finished
+ with each transaction. When 1, the processor will continue to
+ assert bus request after it has finished, if it was the last
+ agent to own the bus and if there are no other pending
+ requests.
+
+**/
+#define PAL_BUS_REQUEST_BUS_PARKING BIT29
+
+
+/**
+
+ PAL Procedure - PAL_BUS_GET_FEATURES.
+
+ Return configurable processor bus interface features and their
+ current settings. It is required by IPF. The PAL procedure
+ supports the Stacked Register calling convention. It could be
+ called at physical mode.
+
+ @param Index Index of PAL_BUS_GET_FEATURES within the list
+ of PAL procedures.
+
+ @return R9 64-bit vector of features implemented.
+ (1=implemented, 0=not implemented)
+
+ @return R10 64-bit vector of current feature settings.
+
+ @return R11 64-bit vector of features controllable by
+ software. (1=controllable, 0= not controllable)
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_BUS_GET_FEATURES 9
+
+/**
+
+ PAL Procedure - PAL_BUS_SET_FEATURES.
+
+ Enable or disable configurable features in processor bus
+ interface. It is required by IPF. It is required by IPF. The PAL procedure
+ supports the Static Registers calling convention. It could be
+ called at physical mode.
+
+ @param Index Index of PAL_BUS_SET_FEATURES within the list
+ of PAL procedures.
+
+ @param FeatureSelect 64-bit vector denoting desired state of
+ each feature (1=select, 0=non-select).
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_BUS_SET_FEATURES 10
+
+
+/**
+
+ PAL Procedure - PAL_DEBUG_INFO.
+
+ Return the number of instruction and data breakpoint
+ registers. It is required by IPF. It is required by IPF. The
+ PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode and virtual
+ mode.
+
+ @param Index Index of PAL_DEBUG_INFO within the list of PAL
+ procedures.
+
+ @return R9 Unsigned 64-bit integer denoting the number of
+ pairs of instruction debug registers implemented
+ by the processor.
+
+ @return R10 Unsigned 64-bit integer denoting the number of
+ pairs of data debug registers implemented by the
+ processor.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_DEBUG_INFO 11
+
+/**
+
+ PAL Procedure - PAL_FIXED_ADDR.
+
+ Return the fixed component of a processor¡¯s directed address.
+ It is required by IPF. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and virtual mode.
+
+ @param Index Index of PAL_FIXED_ADDR within the list of PAL
+ procedures.
+
+ @return R9 Fixed geographical address of this processor.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_FIXED_ADDR 12
+
+/**
+
+ PAL Procedure - PAL_FREQ_BASE.
+
+ Return the frequency of the output clock for use by the
+ platform, if generated by the processor. It is optinal. The
+ PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode and virtual
+ mode.
+
+ @param Index Index of PAL_FREQ_BASE within the list of PAL
+ procedures.
+
+ @return R9 Base frequency of the platform if generated by the
+ processor chip.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_FREQ_BASE 13
+
+
+/**
+
+ PAL Procedure - PAL_FREQ_RATIOS.
+
+ Return ratio of processor, bus, and interval time counter to
+ processor input clock or output clock for platform use, if
+ generated by the processor. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and virtual mode.
+
+ @param Index Index of PAL_FREQ_RATIOS within the list of PAL
+ procedures.
+
+ @return R9 Ratio of the processor frequency to the input
+ clock of the processor, if the platform clock is
+ generated externally or to the output clock to the
+ platform, if the platform clock is generated by
+ the processor.
+
+ @return R10 Ratio of the bus frequency to the input clock of
+ the processor, if the platform clock is generated
+ externally or to the output clock to the platform,
+ if the platform clock is generated by the
+ processor.
+
+ @return R11 Ratio of the interval timer counter rate to input
+ clock of the processor, if the platform clock is
+ generated externally or to the output clock to the
+ platform, if the platform clock is generated by
+ the processor.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_FREQ_RATIOS 14
+
+/**
+
+ @param NumberOfLogicalProcessors Total number of logical
+ processors on this physical
+ processor package that are
+ enabled.
+
+ @param ThreadsPerCore Number of threads per core.
+
+ @param CoresPerProcessor Total number of cores on this
+ physical processor package.
+
+ @param PhysicalProcessorPackageId Physical processor package
+ identifier which was
+ assigned at reset by the
+ platform or bus
+ controller. This value may
+ or may not be unique
+ across the entire platform
+ since it depends on the
+ platform vendor's policy.
+**/
+typedef struct {
+ UINT64 NumberOfLogicalProcessors:16;
+ UINT64 ThreadsPerCore:8;
+ UINT64 Reserved1:8;
+ UINT64 CoresPerProcessor;
+ UINT64 Reserved2:8;
+ UINT64 PhysicalProcessorPackageId:8;
+ UINT64 Reserved3:8;
+} PAL_LOGICAL_PROCESSPR_OVERVIEW;
+
+/**
+
+ @param ThreadId The thread identifier of the logical
+ processor for which information is being
+ returned. This value will be unique on a per
+ core basis.
+
+ @param CoreId The core identifier of the logical processor
+ for which information is being returned.
+ This value will be unique on a per physical
+ processor package basis.
+
+**/
+typedef struct {
+ UINT64 ThreadId:16;
+ UINT64 Reserved1:16;
+ UINT64 CoreId:16;
+ UINT64 Reserved2:16;
+} PAL_LOGICAL_PROCESSORN_INFO1;
+
+
+/**
+
+ @param LogicalAddress Geographical address of the logical
+ processor for which information is being
+ returned. This is the same value that is
+ returned by the PAL_FIXED_ADDR procedure
+ when it is called on the logical
+ processor.
+
+
+**/
+typedef struct {
+ UINT64 LogicalAddress:16;
+ UINT64 Reserved:48;
+} PAL_LOGICAL_PROCESSORN_INFO2;
+
+/**
+
+ PAL Procedure - PAL_LOGICAL_TO_PHYSICAL.
+
+ Return information on which logical processors map to a
+ physical processor die. It is optinal. The PAL procedure
+ supports the Static Registers calling convention. It could be
+ called at physical mode and virtual mode.
+
+ @param Index Index of PAL_LOGICAL_TO_PHYSICAL within the list of PAL
+ procedures.
+
+ @param ProcessorNumber Signed 64-bit integer that specifies
+ for which logical processor
+ information is being requested. When
+ this input argument is -1, information
+ is returned about the logical
+ processor on which the procedure call
+ is made. This input argument must be
+ in the range of 1 up to one less than
+ the number of logical processors
+ returned by num_log in the
+ log_overview return value.
+
+
+ @return R9 The format of PAL_LOGICAL_PROCESSPR_OVERVIEW.
+
+ @return R10 The format of PAL_LOGICAL_PROCESSORN_INFO1.
+
+ @return R11 The format of PAL_LOGICAL_PROCESSORN_INFO2.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_LOGICAL_TO_PHYSICAL 42
+
+
+/**
+
+ @param NumberOfPmcPairs Unsigned 8-bit number defining the
+ number of generic PMC/PMD pairs.
+
+ @param WidthOfCounter Unsigned 8-bit number in the range
+ 0:60 defining the number of
+ implemented counter bits.
+
+ @param TypeOfCycleCounting Unsigned 8-bit number defining the
+ event type for counting processor
+ cycles.
+
+
+ @param TypeOfRetiredInstructionBundle Retired Unsigned 8-bit
+ number defining the
+ event type for retired
+ instruction bundles.
+
+**/
+typedef struct {
+ UINT64 NumberOfPmcPairs:8;
+ UINT64 WidthOfCounter:8;
+ UINT64 TypeOfCycleCounting:8;
+ UINT64 TypeOfRetiredInstructionBundle:8;
+ UINT64 Reserved:32;
+} PAL_PERFORMANCE_INFO;
+
+/**
+
+ PAL Procedure - PAL_PERF_MON_INFO.
+
+ Return the number and type of performance monitors. It is
+ required by IPF. The PAL procedure supports the Static
+ Registers calling convention. It could be called at physical
+ mode and virtual mode.
+
+ @param Index Index of PAL_PERF_MON_INFO within the list of
+ PAL procedures.
+
+ @param PerformanceBuffer An address to an 8-byte aligned
+ 128-byte memory buffer.
+
+
+ @return R9 Information about the performance monitors
+ implemented. See PAL_PERFORMANCE_INFO;
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_PERF_MON_INFO 15
+
+/**
+
+ PAL Procedure - PAL_PLATFORM_ADDR.
+
+ Specify processor interrupt block address and I/O port space
+ address. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode and virtual mode.
+
+ @param Index Index of PAL_PLATFORM_ADDR within the list of
+ PAL procedures.
+
+ @param Type Unsigned 64-bit integer specifying the type of
+ block. 0 indicates that the processor interrupt
+ block pointer should be initialized. 1 indicates
+ that the processor I/O block pointer should be
+ initialized.
+
+ @param Address Unsigned 64-bit integer specifying the address
+ to which the processor I/O block or interrupt
+ block shall be set. The address must specify
+ an implemented physical address on the
+ processor model, bit 63 is ignored.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure.
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_PLATFORM_ADDR 16
+
+
+/**
+
+ @param EnableBerrPromotion Bit63. Enable BERR promotion. When
+ 1, the Bus Error (BERR) signal is
+ promoted to the Bus Initialization
+ (BINIT) signal, and the BINIT pin
+ is asserted on the occurrence of
+ each Bus Error. Setting this bit
+ has no effect if BINIT signalling
+ is disabled. (See
+ PAL_BUS_GET/SET_FEATURES)
+
+ @param EnableMcaPromotion Bit62, Enable MCA promotion. When
+ 1, machine check aborts (MCAs) are
+ promoted to the Bus Error signal,
+ and the BERR pin is assert on each
+ occurrence of an MCA. Setting this
+ bit has no effect if BERR
+ signalling is disabled. (See
+ PAL_BUS_GET/SET_FEATURES)
+
+ @param EnableMcaToBinitPromotion Bit61, Enable MCA to BINIT
+ promotion. When 1, machine
+ check aborts (MCAs) are
+ promoted to the Bus
+ Initialization signal, and
+ the BINIT pin is assert on
+ each occurrence of an MCA.
+ Setting this bit has no
+ effect if BINIT signalling
+ is disabled. (See
+ PAL_BUS_GET/SET_FEATURES)
+
+ @param EnableCmciPromotion Bit60, Enable CMCI promotion When
+ 1, Corrected Machine Check
+ Interrupts (CMCI) are promoted to
+ MCAs. They are also further
+ promoted to BERR if bit 39, Enable
+ MCA promotion, is also set and
+ they are promoted to BINIT if bit
+ 38, Enable MCA to BINIT promotion,
+ is also set. This bit has no
+ effect if MCA signalling is
+ disabled (see
+ PAL_BUS_GET/SET_FEATURES)
+
+ @param DisableCache Bit59, Disable Cache. When 0, the
+ processor performs cast outs on
+ cacheable pages and issues and responds
+ to coherency requests normally. When 1,
+ the processor performs a memory access
+ for each reference regardless of cache
+ contents and issues no coherence
+ requests and responds as if the line
+ were not present. Cache contents cannot
+ be relied upon when the cache is
+ disabled. WARNING: Semaphore
+ instructions may not be atomic or may
+ cause Unsupported Data Reference faults
+ if caches are disabled.
+
+ @param DisableCoherency Bit58, Disable Coherency. When 0,
+ the processor uses normal coherency
+ requests and responses. When 1, the
+ processor answers all requests as if
+ the line were not present.
+
+ @param DisableDPM Bit57, Disable Dynamic Power Management
+ (DPM). When 0, the hardware may reduce
+ power consumption by removing the clock
+ input from idle functional units. When 1,
+ all functional units will receive clock
+ input, even when idle.
+
+ @param DisableBinitWithTimeout Bit56, Disable a BINIT on
+ internal processor time-out.
+ When 0, the processor may
+ generate a BINIT on an
+ internal processor time-out.
+ When 1, the processor will not
+ generate a BINIT on an
+ internal processor time-out.
+ The event is silently ignored.
+
+
+ @param EnableEnvNotification Bit55, Enable external
+ notification when the processor
+ detects hardware errors caused
+ by environmental factors that
+ could cause loss of
+ deterministic behavior of the
+ processor. When 1, this bit will
+ enable external notification,
+ when 0 external notification is
+ not provided. The type of
+ external notification of these
+ errors is processor-dependent. A
+ loss of processor deterministic
+ behavior is considered to have
+ occurred if these
+ environmentally induced errors
+ cause the processor to deviate
+ from its normal execution and
+ eventually causes different
+ behavior which can be observed
+ at the processor bus pins.
+ Processor errors that do not
+ have this effects (i.e.,
+ software induced machine checks)
+ may or may not be promoted
+ depending on the processor
+ implementation.
+
+ @param EnableVmsw Bit54, Enable the use of the vmsw
+ instruction. When 0, the vmsw instruction
+ causes a Virtualization fault when
+ executed at the most privileged level.
+ When 1, this bit will enable normal
+ operation of the vmsw instruction.
+
+ @param EnableMcaOnDataPoisoning Bit53, Enable MCA signaling
+ on data-poisoning event
+ detection. When 0, a CMCI
+ will be signaled on error
+ detection. When 1, an MCA
+ will be signaled on error
+ detection. If this feature
+ is not supported, then the
+ corresponding argument is
+ ignored when calling
+ PAL_PROC_SET_FEATURES. Note
+ that the functionality of
+ this bit is independent of
+ the setting in bit 60
+ (Enable CMCI promotion), and
+ that the bit 60 setting does
+ not affect CMCI signaling
+ for data-poisoning related
+ events. Volume 2: Processor
+ Abstraction Layer 2:431
+ PAL_PROC_GET_FEATURES
+
+ @param DisablePState Bit52, Disable P-states. When 1, the PAL
+ P-state procedures (PAL_PSTATE_INFO,
+ PAL_SET_PSTATE, PAL_GET_PSTATE) will
+ return with a status of -1
+ (Unimplemented procedure).
+
+ @param DisableBranchPrediction Bit47, Disable Dynamic branch
+ prediction. When 0, the
+ processor may predict branch
+ targets and speculatively
+ execute, but may not commit
+ results. When 1, the processor
+ must wait until branch targets
+ are known to execute.
+
+ @param DisableDynamicInsCachePrefetch Bit46, Disable
+ DynamicInstruction Cache
+ Prefetch. When 0, the
+ processor may prefetch
+ into the caches any
+ instruction which has
+ not been executed, but
+ whose execution is
+ likely. When 1,
+ instructions may not be
+ fetched until needed or
+ hinted for execution.
+ (Prefetch for a hinted
+ branch is allowed even
+ when dynamic instruction
+ cache prefetch is
+ disabled.)
+
+ @param DisableDynamicDataCachePrefetch Bit45, Disable Dynamic
+ Data Cache Prefetch.
+ When 0, the processor
+ may prefetch into the
+ caches any data which
+ has not been accessed
+ by instruction
+ execution, but which
+ is likely to be
+ accessed. When 1, no
+ data may be fetched
+ until it is needed for
+ instruction execution
+ or is fetched by an
+ lfetch instruction.
+
+ @param DisableSpontaneousDeferral Bit44, Disable Spontaneous
+ Deferral. When 1, the
+ processor may optionally
+ defer speculative loads
+ that do not encounter any
+ exception conditions, but
+ that trigger other
+ implementation-dependent
+ conditions (e.g., cache
+ miss). When 0, spontaneous
+ deferral is disabled.
+
+ @param DisableDynamicPrediction Bit43, Disable Dynamic
+ Predicate Prediction. When
+ 0, the processor may predict
+ predicate results and
+ execute speculatively, but
+ may not commit results until
+ the actual predicates are
+ known. When 1, the processor
+ shall not execute predicated
+ instructions until the
+ actual predicates are known.
+
+ @param NoXr1ThroughXr3 Bit42, No XR1 through XR3 implemented.
+ Denotes whether XR1 XR3 are
+ implemented for machine check
+ recovery. This feature may only be
+ interrogated by PAL_PROC_GET_FEATURES.
+ It may not be enabled or disabled by
+ PAL_PROC_SET_FEATURES. The
+ corresponding argument is ignored.
+
+ @param NoXipXpsrXfs Bit41, No XIP, XPSR, and XFS
+ implemented. Denotes whether XIP, XPSR,
+ and XFS are implemented for machine
+ check recovery. This feature may only be
+ interrogated by PAL_PROC_GET_FEATURES.
+ It may not be enabled or disabled by
+ PAL_PROC_SET_FEATURES. The corresponding
+ argument is ignored.
+
+ @param NoVM Bit40, No Virtual Machine features implemented.
+ Denotes whether PSR.vm is implemented. This
+ feature may only be interrogated by
+ PAL_PROC_GET_FEATURES. It may not be enabled or
+ disabled by PAL_PROC_SET_FEATURES. The
+ corresponding argument is ignored.
+
+ @param NoVariablePState Bit39, No Variable P-state
+ performance: A value of 1, indicates
+ that a processor implements
+ techniques to optimize performance
+ for the given P-state power budget
+ by dynamically varying the
+ frequency, such that maximum
+ performance is achieved for the
+ power budget. A value of 0,
+ indicates that P-states have no
+ frequency variation or very small
+ frequency variations for their given
+ power budget. This feature may only
+ be interrogated by
+ PAL_PROC_GET_FEATURES. it may not be
+ enabled or disabled by
+ PAL_PROC_SET_FEATURES. The
+ corresponding argument is ignored.
+
+
+ @param NoSimpleImpInUndefinedIns Bit38, No Simple
+ implementation of
+ unimplemented instruction
+ addresses. Denotes how an
+ unimplemented instruction
+ address is recorded in IIP
+ on an Unimplemented
+ Instruction Address trap or
+ fault. When 1, the full
+ unimplemented address is
+ recorded in IIP; when 0, the
+ address is sign extended
+ (virtual addresses) or zero
+ extended (physical
+ addresses). This feature may
+ only be interrogated by
+ PAL_PROC_GET_FEATURES. It
+ may not be enabled or
+ disabled by
+ PAL_PROC_SET_FEATURES. The
+ corresponding argument is
+ ignored.
+
+ @param NoPresentPmi Bit37, No INIT, PMI, and LINT pins
+ present. Denotes the absence of INIT,
+ PMI, LINT0 and LINT1 pins on the
+ processor. When 1, the pins are absent.
+ When 0, the pins are present. This
+ feature may only be interrogated by
+ PAL_PROC_GET_FEATURES. It may not be
+ enabled or disabled by
+ PAL_PROC_SET_FEATURES. The corresponding
+ argument is ignored.
+
+ @param FaultInUndefinedIns Bit36, No Unimplemented
+ instruction address reported as
+ fault. Denotes how the processor
+ reports the detection of
+ unimplemented instruction
+ addresses. When 1, the processor
+ reports an Unimplemented
+ Instruction Address fault on the
+ unimplemented address; when 0, it
+ reports an Unimplemented
+ Instruction Address trap on the
+ previous instruction in program
+ order. This feature may only be
+ interrogated by
+ PAL_PROC_GET_FEATURES. It may not
+ be enabled or disabled by
+ PAL_PROC_SET_FEATURES. The
+ corresponding argument is
+ ignored.
+
+**/
+typedef struct {
+ UINT64 Reserved1:36;
+ UINT64 FaultInUndefinedIns:1;
+ UINT64 NoPresentPmi:1;
+ UINT64 NoSimpleImpInUndefinedIns:1;
+ UINT64 NoVariablePState:1;
+ UINT64 NoVM:1;
+ UINT64 NoXipXpsrXfs:1;
+ UINT64 NoXr1ThroughXr3:1;
+ UINT64 DisableDynamicPrediction:1;
+ UINT64 DisableSpontaneousDeferral:1;
+ UINT64 DisableDynamicDataCachePrefetch:1;
+ UINT64 DisableDynamicInsCachePrefetch:1;
+ UINT64 DisableBranchPrediction:1;
+ UINT64 Reserved2:4;
+ UINT64 DisablePState:1;
+ UINT64 EnableMcaOnDataPoisoning:1;
+ UINT64 EnableVmsw:1;
+ UINT64 EnableEnvNotification:1;
+ UINT64 DisableBinitWithTimeout:1;
+ UINT64 DisableDPM:1;
+ UINT64 DisableCoherency:1;
+ UINT64 DisableCache:1;
+ UINT64 EnableCmciPromotion:1;
+ UINT64 EnableMcaToBinitPromotion:1;
+ UINT64 EnableMcaPromotion:1;
+ UINT64 EnableBerrPromotion:1;
+} PAL_PROCESSOR_FEATURES;
+
+/**
+
+ PAL Procedure - PAL_PROC_GET_FEATURES.
+
+ Return configurable processor features and their current
+ setting. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode and virtual mode.
+
+ @param Index Index of PAL_PROC_GET_FEATURES within the list of
+ PAL procedures.
+
+ @param Reserved Reserved parameter.
+
+ @param FeatureSet Feature set information is being requested
+ for.
+
+
+ @return R9 64-bit vector of features implemented. See
+ PAL_PROCESSOR_FEATURES.
+
+ @return R10 64-bit vector of current feature settings. See
+ PAL_PROCESSOR_FEATURES.
+
+ @return R11 64-bit vector of features controllable by
+ software.
+
+ @return Status 1 - Call completed without error; The
+ feature_set passed is not supported but a
+ feature_set of a larger value is supported.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -8 - feature_set passed is beyond the maximum
+ feature_set supported
+
+**/
+#define PAL_PROC_GET_FEATURES 17
+
+
+/**
+
+ PAL Procedure - PAL_PROC_SET_FEATURES.
+
+ Enable or disable configurable processor features. It is
+ required by IPF. The PAL procedure supports the Static
+ Registers calling convention. It could be called at physical
+ mode.
+
+ @param Index Index of PAL_PROC_SET_FEATURES within the list of
+ PAL procedures.
+
+ @param FeatureSelect 64-bit vector denoting desired state of
+ each feature (1=select, 0=non-select).
+
+ @param FeatureSet Feature set to apply changes to. See
+ PAL_PROC_GET_FEATURES for more information
+ on feature sets.
+
+
+
+ @return Status 1 - Call completed without error; The
+ feature_set passed is not supported but a
+ feature_set of a larger value is supported
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -8 - feature_set passed is beyond the maximum
+ feature_set supported
+
+**/
+#define PAL_PROC_SET_FEATURES 18
+
-#include <Base.h>
//
-// PAL_CALL_RETURN
+// Value of PAL_REGISTER_INFO.InfoRequest.
+//
+#define PAL_APPLICATION_REGISTER_IMPLEMENTED 0
+#define PAL_APPLICATION_REGISTER_READABLE 1
+#define PAL_CONTROL_REGISTER_IMPLEMENTED 2
+#define PAL_CONTROL_REGISTER_READABLE 3
+
+
+/**
+
+ PAL Procedure - PAL_REGISTER_INFO.
+
+ Return AR and CR register information. It is required by IPF.
+ The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode and virtual
+ mode.
+
+ @param Index Index of PAL_REGISTER_INFO within the list of
+ PAL procedures.
+
+ @param InfoRequest Unsigned 64-bit integer denoting what
+ register information is requested. See
+ PAL_REGISTER_INFO.InfoRequest above.
+
+ @return R9 64-bit vector denoting information for registers
+ 0-63. Bit 0 is register 0, bit 63 is register 63.
+
+ @return R10 64-bit vector denoting information for registers
+ 64-127. Bit 0 is register 64, bit 63 is register
+ 127.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_REGISTER_INFO 39
+
+/**
+
+ PAL Procedure - PAL_RSE_INFO.
+
+ Return RSE information. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and virtual mode.
+
+ @param Index Index of PAL_RSE_INFO within the list of
+ PAL procedures.
+
+ @param InfoRequest Unsigned 64-bit integer denoting what
+ register information is requested. See
+ PAL_REGISTER_INFO.InfoRequest above.
+
+ @return R9 Number of physical stacked general registers.
+
+ @return R10 RSE hints supported by processor.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_RSE_INFO 19
+
+/**
+
+ @param VersionOfPalB Is a 16-bit binary coded decimal (BCD)
+ number that provides identification
+ information about the PAL_B firmware.
+
+ @param PalVendor Is an unsigned 8-bit integer indicating the
+ vendor of the PAL code.
+
+ @param VersionOfPalB Is a 16-bit binary coded decimal (BCD)
+ number that provides identification
+ information about the PAL_A firmware. In
+ the split PAL_A model, this return value
+ is the version number of the
+ processor-specific PAL_A. The generic
+ PAL_A version is not returned by this
+ procedure in the split PAL_A model.
+
+**/
+typedef struct {
+ UINT64 VersionOfPalB:16;
+ UINT64 Reserved1:8;
+ UINT64 PalVendor:8;
+ UINT64 VersionOfPalA:16;
+ UINT64 Reserved2:16;
+} PAL_VERSION_INFO;
+
+/**
+
+ PAL Procedure - PAL_VERSION.
+
+ Return version of PAL code. It is required by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode and virtual mode.
+
+ @param Index Index of PAL_VERSION within the list of
+ PAL procedures.
+
+ @param InfoRequest Unsigned 64-bit integer denoting what
+ register information is requested. See
+ PAL_REGISTER_INFO.InfoRequest above.
+
+ @return R9 8-byte formatted value returning the minimum PAL
+ version needed for proper operation of the
+ processor. See PAL_VERSION_INFO above.
+
+ @return R10 8-byte formatted value returning the current PAL
+ version running on the processor. See
+ PAL_VERSION_INFO above.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_VERSION 20
+
+
+
//
+// Vectors of PAL_MC_CLEAR_LOG.pending
+//
+#define PAL_MC_PENDING BIT0
+#define PAL_INIT_PENDING BIT1
+
+/**
+
+ PAL Procedure - PAL_MC_CLEAR_LOG.
+
+ Clear all error information from processor error logging
+ registers. It is required by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called at
+ physical mode and virtual mode.
+
+ @param Index Index of PAL_MC_CLEAR_LOG within the list of
+ PAL procedures.
+
+
+ @return R9 64-bit vector denoting whether an event is
+ pending. See PAL_MC_CLEAR_LOG.pending above.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_MC_CLEAR_LOG 21
+
+/**
+
+ PAL Procedure - PAL_MC_DRAIN.
+
+ Ensure that all operations that could cause an MCA have
+ completed. It is required by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called at
+ physical mode and virtual mode.
+
+ @param Index Index of PAL_MC_DRAIN within the list of PAL
+ procedures.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_MC_DRAIN 22
+
+
+/**
+
+ PAL Procedure - PAL_MC_DYNAMIC_STATE.
+
+ Return Processor Dynamic State for logging by SAL. It is
+ optional. The PAL procedure supports the Static Registers
+ calling convention. It could be called at physical mode.
+
+ @param Index Index of PAL_MC_DYNAMIC_STATE within the list of PAL
+ procedures.
+
+ @param Offset Offset of the next 8 bytes of Dynamic Processor
+ State to return. (multiple of 8).
+
+ @return R9 Unsigned 64-bit integer denoting bytes of Dynamic
+ Processor State returned.
+
+ @return R10 Next 8 bytes of Dynamic Processor State.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure.
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_MC_DYNAMIC_STATE 24
+
+
+
+//
+// Values of PAL_MC_ERROR_INFO.InfoIndex.
+//
+#define PAL_PROCESSOR_ERROR_MAP 0
+#define PAL_PROCESSOR_STATE_PARAM 1
+#define PAL_STRUCTURE_SPECIFIC_ERROR 2
+
+/**
+
+ @param CoreId Bit3:0, Processor core ID (default is 0 for
+ processors with a single core)
+
+ @param ThreadId Bit7:4, Logical thread ID (default is 0 for
+ processors that execute a single thread)
+
+ @param InfoOfInsCache Bit11:8, Error information is
+ available for 1st, 2nd, 3rd, and 4th
+ level instruction caches.
+
+ @param InfoOfDataCache Bit15:12, Error information is
+ available for 1st, 2nd, 3rd, and 4th
+ level data/unified caches.
+
+ @param InfoOfInsTlb Bit19:16 Error information is available
+ for 1st, 2nd, 3rd, and 4th level
+ instruction TLB.
+
+ @param InfoOfDataTlb Bit23:20, Error information is available
+ for 1st, 2nd, 3rd, and 4th level
+ data/unified TLB
+
+ @param InfoOfProcessorBus Bit27:24 Error information is
+ available for the 1st, 2nd, 3rd,
+ and 4th level processor bus
+ hierarchy.
+
+ @param InfoOfRegisterFile Bit31:28 Error information is
+ available on register file
+ structures.
+
+ @param InfoOfMicroArch Bit47:32, Error information is
+ available on micro-architectural
+ structures.
+
+**/
+typedef struct {
+ UINT64 CoreId:4;
+ UINT64 ThreadId:4;
+ UINT64 InfoOfInsCache:4;
+ UINT64 InfoOfDataCache:4;
+ UINT64 InfoOfInsTlb:4;
+ UINT64 InfoOfDataTlb:4;
+ UINT64 InfoOfProcessorBus:4;
+ UINT64 InfoOfRegisterFile:4;
+ UINT64 InfoOfMicroArch:4;
+ UINT64 Reserved:16;
+} PAL_MC_ERROR_INFO_LEVEL_INDEX;
+
+//
+// Value of PAL_MC_ERROR_INFO.ErrorTypeIndex
+//
+#define PAL_ERR_INFO_BY_LEVEL_INDEX 0
+#define PAL_ERR_INFO_TARGET_ADDRESS 1
+#define PAL_ERR_INFO_REQUESTER_IDENTIFIER 2
+#define PAL_ERR_INFO_REPONSER_INDENTIFIER 3
+#define PAL_ERR_INFO_PRECISE_INSTRUCTION_POINTER 4
+
+/**
+
+ @param Operation Bit3:0, Type of cache operation that caused
+ the machine check: 0 - unknown or internal
+ error 1 - load 2 - store 3 - instruction
+ fetch or instruction prefetch 4 - data
+ prefetch (both hardware and software) 5 -
+ snoop (coherency check) 6 - cast out
+ (explicit or implicit write-back of a cache
+ line) 7 - move in (cache line fill)
+
+ @param FailedCacheLevel Bit5:4 Level of cache where the
+ error occurred. A value of 0
+ indicates the first level of cache.
+
+ @param FailedInDataPart Bit8, Failure located in the data
+ part of the cache line.
+
+ @param FailedInTagPart Bit9, Failure located in the tag part
+ of the cache line.
+
+ @param FailedInDataCache Bit10, Failure located in the data
+ cache
+
+ @param FailedInInsCache Bit11, Failure located in the
+ instruction cache.
+
+
+ @param Mesi Bit14:12, 0 - cache line is invalid. 1 - cache
+ line is held shared. 2 - cache line is held
+ exclusive. 3 - cache line is modified. All other
+ values are reserved.
+
+ @param MesiIsValid Bit15, The mesi field in the cache_check
+ parameter is valid.
+
+ @param FailedWay Bit20:16, Failure located in the way of
+ the cache indicated by this value.
+
+ @param WayIndexIsValid Bit21, The way and index field in the
+ cache_check parameter is valid.
+
+ @param MultipleBitsError Bit23, A multiple-bit error was
+ detected, and data was poisoned for
+ the corresponding cache line during
+ castout.
+
+ @param IndexOfCacheLineError Bit51:32, Index of the cache
+ line where the error occurred.
+
+ @param InstructionSet Bit54, Instruction set. If this value
+ is set to zero, the instruction that
+ generated the machine check was an
+ Intel Itanium instruction. If this bit
+ is set to one, the instruction that
+ generated the machine check was IA-32
+ instruction.
+
+ @param InstructionSetIsValid Bit55, The is field in the
+ cache_check parameter is valid.
+
+ @param PrivilegeLevel Bit57:56, Privilege level. The
+ privilege level of the instruction
+ bundle responsible for generating the
+ machine check.
+
+ @param PrivilegeLevelIsValide Bit58, The pl field of the
+ cache_check parameter is
+ valid.
+
+ @param McCorrected Bit59, Machine check corrected: This bit
+ is set to one to indicate that the machine
+ check has been corrected.
+
+ @param TargetAddressIsValid Bit60, Target address is valid:
+ This bit is set to one to
+ indicate that a valid target
+ address has been logged.
+
+ @param RequesterIdentifier Bit61, Requester identifier: This
+ bit is set to one to indicate that
+ a valid requester identifier has
+ been logged.
+
+ @param ResponserIdentifier Bit62, Responder identifier: This
+ bit is set to one to indicate that
+ a valid responder identifier has
+ been logged.
+
+ @param PreciseInsPointer Bit63, Precise instruction pointer.
+ This bit is set to one to indicate
+ that a valid precise instruction
+ pointer has been logged.
+
+**/
+typedef struct {
+ UINT64 Operation:4;
+ UINT64 FailedCacheLevel:2;
+ UINT64 Reserved1:2;
+ UINT64 FailedInDataPart:1;
+ UINT64 FailedInTagPart:1;
+ UINT64 FailedInDataCache:1;
+ UINT64 FailedInInsCache:1;
+ UINT64 Mesi:3;
+ UINT64 MesiIsValid:1;
+ UINT64 FailedWay:5;
+ UINT64 WayIndexIsValid:1;
+
+ UINT64 Reserved2:1;
+ UINT64 MultipleBitsError:1;
+ UINT64 Reserved3:8;
+ UINT64 IndexOfCacheLineError:20;
+ UINT64 Reserved4:2;
+ UINT64 InstructionSet:1;
+ UINT64 InstructionSetIsValid:1;
+
+ UINT64 PrivilegeLevel:2;
+ UINT64 PrivilegeLevelIsValide:1;
+
+ UINT64 McCorrected:1;
+
+ UINT64 TargetAddressIsValid:1;
+ UINT64 RequesterIdentifier:1;
+ UINT64 ResponserIdentifier:1;
+ UINT64 PreciseInsPointer:1;
+
+} PAL_CACHE_CHECK_INFO;
+
+/**
+
+ @param FailedSlot Bit7:0, Slot number of the translation
+ register where the failure occurred.
+
+ @param FailedSlotIsValid Bit8, The tr_slot field in the
+ TLB_check parameter is valid.
+
+ @param TlbLevel Bit11:10, The level of the TLB where the
+ error occurred. A value of 0 indicates the
+ first level of TLB
+
+ @param FailedInDataTr Bit16, Error occurred in the data
+ translation registers.
+
+ @param FailedInInsTr Bit17, Error occurred in the instruction
+ translation registers
+
+ @param FailedInDataTc Bit18, Error occurred in data
+ translation cache.
+
+ @param FailedInInsTc Bit19, Error occurred in the instruction
+ translation cache.
+
+ @param FailedOperation Bit23:20, Type of cache operation that
+ caused the machine check: 0 - unknown
+ 1 - TLB access due to load instruction
+ 2 - TLB access due to store
+ instruction 3 - TLB access due to
+ instruction fetch or instruction
+ prefetch 4 - TLB access due to data
+ prefetch (both hardware and software)
+ 5 - TLB shoot down access 6 - TLB
+ probe instruction (probe, tpa) 7 -
+ move in (VHPT fill) 8 - purge (insert
+ operation that purges entries or a TLB
+ purge instruction) All other values
+ are reserved.
+
+ @param InstructionSet Bit54, Instruction set. If this value
+ is set to zero, the instruction that
+ generated the machine check was an
+ Intel Itanium instruction. If this bit
+ is set to one, the instruction that
+ generated the machine check was IA-32
+ instruction.
+
+ @param InstructionSetIsValid Bit55, The is field in the
+ TLB_check parameter is valid.
+
+ @param PrivelegeLevel Bit57:56, Privilege level. The
+ privilege level of the instruction
+ bundle responsible for generating the
+ machine check.
+
+ @param PrivelegeLevelIsValid Bit58, The pl field of the
+ TLB_check parameter is valid.
+
+ @param McCorrected Bit59, Machine check corrected: This bit
+ is set to one to indicate that the machine
+ check has been corrected.
+
+ @param TargetAddressIsValid Bit60, Target address is valid:
+ This bit is set to one to
+ indicate that a valid target
+ address has been logged.
+
+ @param RequesterIdentifier Bit61 Requester identifier: This
+ bit is set to one to indicate that
+ a valid requester identifier has
+ been logged.
+
+ @param ResponserIdentifier Bit62, Responder identifier: This
+ bit is set to one to indicate that
+ a valid responder identifier has
+ been logged.
+
+ @param PreciseInsPointer Bit63 Precise instruction pointer.
+ This bit is set to one to indicate
+ that a valid precise instruction
+ pointer has been logged.
+**/
+typedef struct {
+ UINT64 FailedSlot:8;
+ UINT64 FailedSlotIsValid:1;
+ UINT64 Reserved1 :1;
+ UINT64 TlbLevel:2;
+ UINT64 Reserved2 :4;
+ UINT64 FailedInDataTr:1;
+ UINT64 FailedInInsTr:1;
+ UINT64 FailedInDataTc:1;
+ UINT64 FailedInInsTc:1;
+ UINT64 FailedOperation:4;
+ UINT64 Reserved3:30;
+ UINT64 InstructionSet:1;
+ UINT64 InstructionSetIsValid:1;
+ UINT64 PrivelegeLevel:2;
+ UINT64 PrivelegeLevelIsValid:1;
+ UINT64 McCorrected:1;
+ UINT64 TargetAddressIsValid:1;
+ UINT64 RequesterIdentifier:1;
+ UINT64 ResponserIdentifier:1;
+ UINT64 PreciseInsPointer:1;
+} PAL_TLB_CHECK_INFO;
+
+/**
+
+ PAL Procedure - PAL_MC_ERROR_INFO.
+
+ Return Processor Machine Check Information and Processor
+ Static State for logging by SAL. It is required by IPF. The
+ PAL procedure supports the Static Registers calling
+ convention. It could be called at physical and virtual mode.
+
+ @param Index Index of PAL_MC_ERROR_INFO within the list of PAL
+ procedures.
+
+ @param InfoIndex Unsigned 64-bit integer identifying the
+ error information that is being requested.
+ See PAL_MC_ERROR_INFO.InfoIndex.
+
+ @param LevelIndex 8-byte formatted value identifying the
+ structure to return error information
+ on. See PAL_MC_ERROR_INFO_LEVEL_INDEX.
+
+ @param ErrorTypeIndex Unsigned 64-bit integer denoting the
+ type of error information that is
+ being requested for the structure
+ identified in LevelIndex.
+
+
+ @return R9 Error information returned. The format of this
+ value is dependant on the input values passed.
+
+ @return R10 If this value is zero, all the error information
+ specified by err_type_index has been returned. If
+ this value is one, more structure-specific error
+ information is available and the caller needs to
+ make this procedure call again with level_index
+ unchanged and err_type_index, incremented.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -6 - Argument was valid, but no error
+ information was available
+
+
+**/
+#define PAL_MC_ERROR_INFO 25
+
+/**
+
+ PAL Procedure - PAL_MC_EXPECTED.
+
+ Set/Reset Expected Machine Check Indicator. It is required by
+ IPF. The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode.
+
+ @param Index Index of PAL_MC_EXPECTED within the list of PAL
+ procedures.
+
+ @param Expected Unsigned integer with a value of 0 or 1 to
+ set or reset the hardware resource
+ PALE_CHECK examines for expected machine
+ checks.
+
+
+ @return R9 Unsigned integer denoting whether a machine check
+ was previously expected.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_MC_EXPECTED 23
+
+/**
+
+ PAL Procedure - PAL_MC_REGISTER_MEM.
+
+ Register min-state save area with PAL for machine checks and
+ inits. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode.
+
+ @param Index Index of PAL_MC_REGISTER_MEM within the list of PAL
+ procedures.
+
+ @param Address Physical address of the buffer to be
+ registered with PAL.
+
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_MC_REGISTER_MEM 27
+
+/**
+
+ PAL Procedure - PAL_MC_RESUME.
+
+ Restore minimal architected state and return to interrupted
+ process. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode.
+
+ @param Index Index of PAL_MC_RESUME within the list of PAL
+ procedures.
+
+ @param SetCmci Unsigned 64 bit integer denoting whether to
+ set the CMC interrupt. A value of 0 indicates
+ not to set the interrupt, a value of 1
+ indicated to set the interrupt, and all other
+ values are reserved.
+
+ @param SavePtr Physical address of min-state save area used
+ to used to restore processor state.
+
+ @param NewContext Unsigned 64-bit integer denoting whether
+ the caller is returning to a new context.
+ A value of 0 indicates the caller is
+ returning to the interrupted context, a
+ value of 1 indicates that the caller is
+ returning to a new context.
+
+
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_MC_RESUME 26
+
+/**
+
+ PAL Procedure - PAL_HALT.
+
+ Enter the low-power HALT state or an implementation-dependent
+ low-power state. It is optinal. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode.
+
+ @param Index Index of PAL_HALT within the list of PAL
+ procedures.
+
+ @param HaltState Unsigned 64-bit integer denoting low power
+ state requested.
+
+ @param IoDetailPtr 8-byte aligned physical address pointer to
+ information on the type of I/O
+ (load/store) requested.
+
+
+ @return R9 Value returned if a load instruction is requested
+ in the io_detail_ptr
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_HALT 28
+
+
+/**
+
+ PAL Procedure - PAL_HALT_INFO.
+
+ Return the low power capabilities of the processor. It is
+ required by IPF. The PAL procedure supports the
+ Stacked Registers calling convention. It could be called at
+ physical and virtual mode.
+
+ @param Index Index of PAL_HALT_INFO within the list of PAL
+ procedures.
+
+ @param PowerBuffer 64-bit pointer to a 64-byte buffer aligned
+ on an 8-byte boundary.
+
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_HALT_INFO 257
+
+
+/**
+
+ PAL Procedure - PAL_HALT_LIGHT.
+
+ Enter the low power LIGHT HALT state. It is required by
+ IPF. The PAL procedure supports the Static Registers calling
+ convention. It could be called at physical and virtual mode.
+
+ @param Index Index of PAL_HALT_LIGHT within the list of PAL
+ procedures.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_HALT_LIGHT 29
+
+/**
+
+ PAL Procedure - PAL_CACHE_LINE_INIT.
+
+ Initialize tags and data of a cache line for processor
+ testing. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical and virtual mode.
+
+ @param Index Index of PAL_CACHE_LINE_INIT within the list of PAL
+ procedures.
+
+ @param Address Unsigned 64-bit integer value denoting the
+ physical address from which the physical page
+ number is to be generated. The address must be
+ an implemented physical address, bit 63 must
+ be zero.
+
+ @param DataValue 64-bit data value which is used to
+ initialize the cache line.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_CACHE_LINE_INIT 31
+
+/**
+
+ PAL Procedure - PAL_CACHE_READ.
+
+ Read tag and data of a cache line for diagnostic testing. It
+ is optional. The PAL procedure supports the
+ Satcked Registers calling convention. It could be called at
+ physical mode.
+
+ @param Index Index of PAL_CACHE_READ within the list of PAL
+ procedures.
+
+ @param LineId 8-byte formatted value describing where in the
+ cache to read the data.
+
+ @param Address 64-bit 8-byte aligned physical address from
+ which to read the data. The address must be an
+ implemented physical address on the processor
+ model with bit 63 set to zero.
+
+ @return R9 Right-justified value returned from the cache
+ line.
+
+ @return R10 The number of bits returned in data.
+
+ @return R11 The status of the cache line.
+
+
+
+ @return Status 1 - The word at address was found in the
+ cache, but the line was invalid.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -5 - The word at address was not found in the
+ cache.
+
+ @return Status -7 - The operation requested is not supported
+ for this cache_type and level.
+
+**/
+#define PAL_CACHE_READ 259
+
+
+/**
+
+ Write tag and data of a cache for diagnostic testing. It is
+ optional. The PAL procedure supports the Satcked Registers
+ calling convention. It could be called at physical mode.
+
+ @param Index Index of PAL_CACHE_WRITE within the list of PAL
+ procedures.
+
+ @param LineId 8-byte formatted value describing where in the
+ cache to write the data.
+
+ @param Address 64-bit 8-byte aligned physical address at
+ which the data should be written. The address
+ must be an implemented physical address on the
+ processor model with bit 63 set to 0.
+
+ @param Data Unsigned 64-bit integer value to write into
+ the specified part of the cache.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+ @return Status -7 - The operation requested is not supported
+ for this cache_type and level.
+
+**/
+#define PAL_CACHE_WRITE 260
+
+/**
+
+ PAL Procedure - PAL_TEST_INFO.
+
+ Returns alignment and size requirements needed for the memory
+ buffer passed to the PAL_TEST_PROC procedure as well as
+ information on self-test control words for the processor self
+ tests. It is required by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode.
+
+ @param Index Index of PAL_TEST_INFO within the list of PAL
+ procedures.
+
+ @param TestPhase Unsigned integer that specifies which phase
+ of the processor self-test information is
+ being requested on. A value of 0 indicates
+ the phase two of the processor self-test and
+ a value of 1 indicates phase one of the
+ processor self-test. All other values are
+ reserved.
+
+ @return R9 Unsigned 64-bit integer denoting the number of
+ bytes of main memory needed to perform the second
+ phase of processor self-test.
+
+ @return R10 Unsigned 64-bit integer denoting the alignment
+ required for the memory buffer.
+
+ @return R11 48-bit wide bit-field indicating if control of
+ the processor self-tests is supported and which
+ bits of the test_control field are defined for
+ use.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_TEST_INFO 37
+
+/**
+
+ @param BufferSize Indicates the size in bytes of the memory
+ buffer that is passed to this procedure.
+ BufferSize must be greater than or equal in
+ size to the bytes_needed return value from
+ PAL_TEST_INFO, otherwise this procedure will
+ return with an invalid argument return
+ value.
+
+ @param TestPhase Defines which phase of the processor
+ self-tests are requested to be run. A value
+ of zero indicates to run phase two of the
+ processor self-tests. Phase two of the
+ processor self-tests are ones that require
+ external memory to execute correctly. A
+ value of one indicates to run phase one of
+ the processor self-tests. Phase one of the
+ processor self-tests are tests run during
+ PALE_RESET and do not depend on external
+ memory to run correctly. When the caller
+ requests to have phase one of the processor
+ self-test run via this procedure call, a
+ memory buffer may be needed to save and
+ restore state as required by the PAL calling
+ conventions. The procedure PAL_TEST_INFO
+ informs the caller about the requirements of
+ the memory buffer.
+
+**/
+typedef struct {
+ UINT64 BufferSize:56;
+ UINT64 TestPhase:8;
+} PAL_TEST_INFO_INFO;
+
+/**
+
+ @param TestControl This is an ordered implementation-specific
+ control word that allows the user control
+ over the length and runtime of the
+ processor self-tests. This control word is
+ ordered from the longest running tests up
+ to the shortest running tests with bit 0
+ controlling the longest running test. PAL
+ may not implement all 47-bits of the
+ test_control word. PAL communicates if a
+ bit provides control by placing a zero in
+ that bit. If a bit provides no control,
+ PAL will place a one in it. PAL will have
+ two sets of test_control bits for the two
+ phases of the processor self-test. PAL
+ provides information about implemented
+ test_control bits at the hand-off from PAL
+ to SAL for the firmware recovery check.
+ These test_control bits provide control
+ for phase one of processor self-test. It
+ also provides this information via the PAL
+ procedure call PAL_TEST_INFO for both the
+ phase one and phase two processor tests
+ depending on which information the caller
+ is requesting. PAL interprets these bits
+ as input parameters on two occasions. The
+ first time is when SAL passes control back
+ to PAL after the firmware recovery check.
+ The second time is when a call to
+ PAL_TEST_PROC is made. When PAL interprets
+ these bits it will only interpret
+ implemented test_control bits and will
+ ignore the values located in the
+ unimplemented test_control bits. PAL
+ interprets the implemented bits such that
+ if a bit contains a zero, this indicates
+ to run the test. If a bit contains a one,
+ this indicates to PAL to skip the test. If
+ the cs bit indicates that control is not
+ available, the test_control bits will be
+ ignored or generate an illegal argument in
+ procedure calls if the caller sets these
+ bits.
+
+ @param ControlSupport This bit defines if an implementation
+ supports control of the PAL self-tests
+ via the self-test control word. If
+ this bit is 0, the implementation does
+ not support control of the processor
+ self-tests via the self-test control
+ word. If this bit is 1, the
+ implementation does support control of
+ the processor self-tests via the
+ self-test control word. If control is
+ not supported, GR37 will be ignored at
+ the hand-off between SAL and PAL after
+ the firmware recovery check and the
+ PAL procedures related to the
+ processor self-tests may return
+ illegal arguments if a user tries to
+ use the self-test control features.
+
+**/
+typedef struct {
+ UINT64 TestControl:47;
+ UINT64 ControlSupport:1;
+ UINT64 Reserved:16;
+} PAL_SELF_TEST_CONTROL;
+
+/**
+
+ @param Attributes Specifies the memory attributes that are
+ allowed to be used with the memory buffer
+ passed to this procedure. The attributes
+ parameter is a vector where each bit
+ represents one of the virtual memory
+ attributes defined by the architecture.See
+ MEMORY_AATRIBUTES. The caller is required
+ to support the cacheable attribute for the
+ memory buffer, otherwise an invalid
+ argument will be returned.
+
+
+ @param TestControl Is the self-test control word
+ corresponding to the test_phase passed.
+ This test_control directs the coverage and
+ runtime of the processor self-tests
+ specified by the test_phase input
+ argument. Information on if this
+ feature is implemented and the number of
+ bits supported can be obtained by the
+ PAL_TEST_INFO procedure call. If this
+ feature is implemented by the processor,
+ the caller can selectively skip parts of
+ the processor self-test by setting
+ test_control bits to a one. If a bit has a
+ zero, this test will be run. The values in
+ the unimplemented bits are ignored. If
+ PAL_TEST_INFO indicated that the self-test
+ control word is not implemented, this
+ procedure will return with an invalid
+ argument status if the caller sets any of
+ the test_control bits. See
+ PAL_SELF_TEST_CONTROL.
+**/
+typedef struct {
+ UINT64 Attributes:8;
+ UINT64 Reserved:8;
+ UINT64 TestControl:48;
+} PAL_TEST_CONTROL;
+
+/**
+
+ PAL Procedure - PAL_TEST_PROC.
+
+ Perform late processor self test. It is required by IPF. The
+ PAL procedure supports the Static Registers calling
+ convention. It could be called at physical mode.
+
+ @param Index Index of PAL_TEST_PROC within the list of PAL
+ procedures.
+
+ @param TestAddress 64-bit physical address of main memory
+ area to be used by processor self-test.
+ The memory region passed must be
+ cacheable, bit 63 must be zero.
+
+ @param TestInfo Input argument specifying the size of the
+ memory buffer passed and the phase of the
+ processor self-test that should be run. See
+ PAL_TEST_INFO.
+
+ @param TestParam Input argument specifying the self-test
+ control word and the allowable memory
+ attributes that can be used with the memory
+ buffer. See PAL_TEST_CONTROL.
+
+ @return R9 Formatted 8-byte value denoting the state of the
+ processor after self-test
+
+
+
+ @return Status 1 - Call completed without error, but hardware
+ failures occurred during self-test.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_TEST_PROC 258
+
+/**
+
+ @param NumberOfInterruptControllers Number of interrupt
+ controllers currently
+ enabled on the system.
+
+ @param NumberOfProcessors Number of processors currently
+ enabled on the system.
+
+**/
+typedef struct {
+ UINT32 NumberOfInterruptControllers;
+ UINT32 NumberOfProcessors;
+} PAL_PLATFORM_INFO;
+
+/**
+
+ PAL Procedure - PAL_COPY_INFO.
+
+ Return information needed to relocate PAL procedures and PAL
+ PMI code to memory. It is required by IPF. The PAL procedure
+ supports the Static Registers calling convention. It could be
+ called at physical mode.
+
+ @param Index Index of PAL_COPY_INFO within the list of PAL
+ procedures.
+
+ @param CopyType Unsigned integer denoting type of procedures
+ for which copy information is requested.
+
+ @param PlatformInfo 8-byte formatted value describing the
+ number of processors and the number of
+ interrupt controllers currently enabled
+ on the system. See PAL_PLATFORM_INFO.
+
+
+ @param McaProcStateInfo Unsigned integer denoting the number
+ of bytes that SAL needs for the
+ min-state save area for each
+ processor.
+
+
+
+ @return R9 Unsigned integer denoting the number of bytes of
+ PAL information that must be copied to main
+ memory.
+
+ @return R10 Unsigned integer denoting the starting alignment
+ of the data to be copied.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_COPY_INFO 30
+
+/**
+
+ PAL Procedure - PAL_COPY_PAL.
+
+ Relocate PAL procedures and PAL PMI code to memory. It is
+ required by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at physical
+ mode.
+
+ @param Index Index of PAL_COPY_PAL within the list of PAL
+ procedures.
+
+ @param TargetAddress Physical address of a memory buffer to
+ copy relocatable PAL procedures and PAL
+ PMI code.
+
+ @param AllocSize Unsigned integer denoting the size of the
+ buffer passed by SAL for the copy operation.
+
+
+ @param CopyOption Unsigned integer indicating whether
+ relocatable PAL code and PAL PMI code
+ should be copied from firmware address
+ space to main memory.
+
+
+ @return R9 Unsigned integer denoting the offset of PAL_PROC
+ in the relocatable segment copied.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_COPY_PAL 256
+
+/**
+
+ PAL Procedure - PAL_ENTER_IA_32_ENV.
+
+ Enter IA-32 System environment. It is optional. The PAL
+ procedure supports the Static Registers calling convention.
+ It could be called at physical mode.
+
+ Note: Since this is a special call, it does not follow the PAL
+ static register calling convention. GR28 contains the index of
+ PAL_ENTER_IA_32_ENV within the list of PAL procedures. All other
+ input arguments including GR29-GR31 are setup by SAL to values
+ as required by the IA-32 operating system defined in Table
+ 11-67. The registers that are designated as preserved, scratch,
+ input arguments and procedure return values by the static
+ procedure calling convention are not followed by this call. For
+ instance, GR5 and GR6 need not be preserved since these are
+ regarded as scratch by the IA-32 operating system. Note: In an
+ MP system, this call must be COMPLETED on the first CPU to enter
+ the IA-32 System Environment (may or may not be the BSP) prior
+ to being called on the remaining processors in the MP system.
+
+ @param Index GR28 contains the index of the
+ PAL_ENTER_IA_32_ENV call within the list of PAL
+ procedures.
+
+
+ @return Status The status is returned in GR4.
+ -1 - Un-implemented procedure 0 JMPE detected
+ at privilege level
+
+ 0 - 1 SAL allocated buffer for IA-32 System
+ Environment operation is too small
+
+ 2 - IA-32 Firmware Checksum Error
+
+ 3 - SAL allocated buffer for IA-32 System
+ Environment operation is not properly aligned
+
+ 4 - Error in SAL MP Info Table
+
+ 5 - Error in SAL Memory Descriptor Table
+
+ 6 - Error in SAL System Table
+
+ 7 - Inconsistent IA-32 state
+
+ 8 - IA-32 Firmware Internal Error
+
+ 9 - IA-32 Soft Reset (Note: remaining register
+ state is undefined for this termination
+ reason)
+
+ 10 - Machine Check Error
+
+ 11 - Error in SAL I/O Intercept Table
+
+ 12 - Processor exit due to other processor in
+ MP system terminating the IA32 system
+ environment. (Note: remaining register state
+ is undefined for this termination reason.)
+
+ 13 - Itanium architecture-based state
+ corruption by either SAL PMI handler or I/O
+ Intercept callback function.
+
+
+**/
+#define PAL_ENTER_IA_32_ENV 33
+
+/**
+
+ PAL Procedure - PAL_PMI_ENTRYPOINT.
+
+ Register PMI memory entrypoints with processor. It is required
+ by IPF. The PAL procedure supports the Stacked Registers
+ calling convention. It could be called at physical mode.
+
+ @param Index Index of PAL_PMI_ENTRYPOINT within the list of
+ PAL procedures.
+
+ @param SalPmiEntry 256-byte aligned physical address of SAL
+ PMI entrypoint in memory.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+
+**/
+#define PAL_PMI_ENTRYPOINT 32
+
+
+/**
+
+ The ASCII brand identification string will be copied to the
+ address specified in the address input argument. The processor
+ brand identification string is defined to be a maximum of 128
+ characters long; 127 bytes will contain characters and the 128th
+ byte is defined to be NULL (0). A processor may return less than
+ the 127 ASCII characters as long as the string is null
+ terminated. The string length will be placed in the brand_info
+ return argument.
+
+**/
+#define PAL_BRAND_INFO_ID_REQUEST 0
+
+/**
+
+ PAL Procedure - PAL_BRAND_INFO.
+
+ Provides processor branding information. It is optional by
+ IPF. The PAL procedure supports the Stacked Registers calling
+ convention. It could be called at physical and Virtual mode.
+
+
+ @param Index Index of PAL_BRAND_INFO within the list of PAL
+ procedures.
+
+ @param InfoRequest Unsigned 64-bit integer specifying the
+ information that is being requested. (See
+ PAL_BRAND_INFO_ID_REQUEST)
+
+ @param Address Unsigned 64-bit integer specifying the
+ address of the 128-byte block to which the
+ processor brand string shall be written.
+
+
+ @reture R9 Brand information returned. The format of this
+ value is dependent on the input values passed.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -6 - Input argument is not implemented.
+
+**/
+#define PAL_BRAND_INFO 274
+
+/**
+
+ PAL Procedure - PAL_GET_HW_POLICY.
+
+ Returns the current hardware resource sharing policy of the
+ processor. It is optional by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called at
+ physical and Virtual mode.
+
+
+ @param Index Index of PAL_GET_HW_POLICY within the list of PAL
+ procedures.
+
+ @param ProcessorNumber Unsigned 64-bit integer that specifies
+ for which logical processor
+ information is being requested. This
+ input argument must be zero for the
+ first call to this procedure and can
+ be a maximum value of one less than
+ the number of logical processors
+ impacted by the hardware resource
+ sharing policy, which is returned by
+ the R10 return value.
+
+
+ @reture R9 Unsigned 64-bit integer representing the current
+ hardware resource sharing policy.
+
+ @return R10 Unsigned 64-bit integer that returns the number
+ of logical processors impacted by the policy
+ input argument.
+
+ @return R11 Unsigned 64-bit integer containing the logical
+ address of one of the logical processors
+ impacted by policy modification.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_GET_HW_POLICY 48
+
+
+//
+// Value of PAL_SET_HW_POLICY.Policy
+//
+#define PAL_SET_HW_POLICY_PERFORMANCE 0
+#define PAL_SET_HW_POLICY_FAIRNESS 1
+#define PAL_SET_HW_POLICY_HIGH_PRIORITY 2
+#define PAL_SET_HW_POLICY_EXCLUSIVE_HIGH_PRIORITY 3
+
+/**
+
+ PAL Procedure - PAL_SET_HW_POLICY.
+
+ Sets the current hardware resource sharing policy of the
+ processor. It is optional by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called at
+ physical and Virtual mode.
+
+
+ @param Index Index of PAL_SET_HW_POLICY within the list of PAL
+ procedures.
+
+ @param Policy Unsigned 64-bit integer specifying the hardware
+ resource sharing policy the caller is setting.
+ See Value of PAL_SET_HW_POLICY.Policy above.
+
+
+ @return Status 1 - Call completed successfully but could not
+ change the hardware policy since a
+ competing logical processor is set in
+ exclusive high priority.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_SET_HW_POLICY 49
+
+
+/**
+
+ @param Mode Bit2:0, Indicates the mode of operation for this
+ procedure: 0 - Query mode 1 ¨C Error inject mode
+ (err_inj should also be specified) 2 - Cancel
+ outstanding trigger. All other fields in
+ PAL_MC_ERROR_TYPE_INFO,
+ PAL_MC_ERROR_STRUCTURE_INFO and
+ PAL_MC_ERROR_DATA_BUFFER are ignored. All other
+ values are reserved.
+
+ @param ErrorInjection Bit5:3, indicates the mode of error
+ injection: 0 - Error inject only (no
+ error consumption) 1 - Error inject
+ and consume All other values are
+ reserved.
+
+
+ @param ErrorSeverity Bit7:6, indicates the severity desired
+ for error injection/query. Definitions
+ of the different error severity types
+ 0 - Corrected error 1 - Recoverable
+ error 2 - Fatal error 3 - Reserved
+
+
+ @param ErrorStructure Bit12:8, Indicates the structure
+ identification for error
+ injection/query: 0 - Any structure
+ (cannot be used during query mode).
+ When selected, the structure type used
+ for error injection is determined by
+ PAL. 1 - Cache 2 - TLB 3 - Register
+ file 4 - Bus/System interconnect 5-15
+ - Reserved 16-31 - Processor
+ specific error injection
+ capabilities.ErrorDataBuffer is used
+ to specify error types. Please refer
+ to the processor specific
+ documentation for additional details.
+
+ @param StructureHierarchy Bit15:13, Indicates the structure
+ hierarchy for error
+ injection/query: 0 - Any level of
+ hierarchy (cannot be used during
+ query mode). When selected, the
+ structure hierarchy used for error
+ injection is determined by PAL. 1
+ - Error structure hierarchy
+ level-1 2 - Error structure
+ hierarchy level-2 3 - Error
+ structure hierarchy level-3 4 -
+ Error structure hierarchy level-4
+ All other values are reserved.
+ Reserved 63:16 Reserved
+
+**/
+typedef struct {
+ UINT64 Mode:3;
+ UINT64 ErrorInjection:3;
+ UINT64 ErrorSeverity:2;
+ UINT64 ErrorStructure:5;
+ UINT64 StructureHierarchy:3;
+ UINT64 Reserved:48;
+} PAL_MC_ERROR_TYPE_INFO;
+
+/**
+
+ @param StructInfoIsValid Bit0 When 1, indicates that the
+ structure information fields
+ (c_t,cl_p,cl_id) are valid and
+ should be used for error injection.
+ When 0, the structure information
+ fields are ignored, and the values
+ of these fields used for error
+ injection are
+ implementation-specific.
+
+ @param CacheType Bit2:1 Indicates which cache should be used
+ for error injection: 0 - Reserved 1 -
+ Instruction cache 2 - Data or unified cache
+ 3 - Reserved
+
+
+ @param PortionOfCacheLine Bit5:3 Indicates the portion of the
+ cache line where the error should
+ be injected: 0 - Reserved 1 - Tag
+ 2 - Data 3 - mesi All other
+ values are reserved.
+
+ @param Mechanism Bit8:6 Indicates which mechanism is used to
+ identify the cache line to be used for error
+ injection: 0 - Reserved 1 - Virtual address
+ provided in the inj_addr field of the buffer
+ pointed to by err_data_buffer should be used
+ to identify the cache line for error
+ injection. 2 - Physical address provided in
+ the inj_addr field of the buffer pointed to
+ by err_data_buffershould be used to identify
+ the cache line for error injection. 3 - way
+ and index fields provided in err_data_buffer
+ should be used to identify the cache line
+ for error injection. All other values are
+ reserved.
+
+ @param DataPoisonOfCacheLine Bit9 When 1, indicates that a
+ multiple bit, non-correctable
+ error should be injected in the
+ cache line specified by cl_id.
+ If this injected error is not
+ consumed, it may eventually
+ cause a data-poisoning event
+ resulting in a corrected error
+ signal, when the associated
+ cache line is cast out (implicit
+ or explicit write-back of the
+ cache line). The error severity
+ specified by err_sev in
+ err_type_info must be set to 0
+ (corrected error) when this bit
+ is set.
+
+
+ @param TrigerInfoIsValid Bit32 When 1, indicates that the
+ trigger information fields (trigger,
+ trigger_pl) are valid and should be
+ used for error injection. When 0,
+ the trigger information fields are
+ ignored and error injection is
+ performed immediately.
+
+ @param Triger Bit36:33 Indicates the operation type to be
+ used as the error trigger condition. The
+ address corresponding to the trigger is
+ specified in the trigger_addr field of the
+ buffer pointed to by err_data_buffer: 0 -
+ Instruction memory access. The trigger match
+ conditions for this operation type are similar
+ to the IBR address breakpoint match conditions
+ 1 - Data memory access. The trigger match
+ conditions for this operation type are similar
+ to the DBR address breakpoint match conditions
+ All other values are reserved.
+
+ @param PrivilegeOfTriger Bit39:37 Indicates the privilege
+ level of the context during which
+ the error should be injected: 0 -
+ privilege level 0 1 - privilege
+ level 1 2 - privilege level 2 3 -
+ privilege level 3 All other values
+ are reserved. If the implementation
+ does not support privilege level
+ qualifier for triggers (i.e. if
+ trigger_pl is 0 in the capabilities
+ vector), this field is ignored and
+ triggers can be taken at any
+ privilege level.
+
+**/
+typedef struct {
+ UINT64 StructInfoIsValid:1;
+ UINT64 CacheType:2;
+ UINT64 PortionOfCacheLine:3;
+ UINT64 Mechanism:3;
+ UINT64 DataPoisonOfCacheLine:1;
+ UINT64 Reserved1:22;
+ UINT64 TrigerInfoIsValid:1;
+ UINT64 Triger:4;
+ UINT64 PrivilegeOfTriger:3;
+ UINT64 Reserved2:24;
+} PAL_MC_ERROR_STRUCT_INFO;
+
+/**
+
+ Buffer Pointed to by err_data_buffer ¨C TLB
+
+**/
+typedef struct {
+ UINT64 TrigerAddress;
+ UINT64 VirtualPageNumber:52;
+ UINT64 Reserved1:8;
+ UINT64 RegionId:24;
+ UINT64 Reserved2:40;
+} PAL_MC_ERROR_DATA_BUFFER_TLB;
+
+/**
+
+ PAL Procedure - PAL_MC_ERROR_INJECT.
+
+ Injects the requested processor error or returns information
+ on the supported injection capabilities for this particular
+ processor implementation. It is optional by IPF. The PAL
+ procedure supports the Stacked Registers calling convention.
+ It could be called at physical and Virtual mode.
+
+
+ @param Index Index of PAL_MC_ERROR_INJECT within the list of PAL
+ procedures.
+
+ @param ErrorTypeInfo Unsigned 64-bit integer specifying the
+ first level error information which
+ identifies the error structure and
+ corresponding structure hierarchy, and
+ the error severity.
+
+ @param ErrorStructInfo Unsigned 64-bit integer identifying
+ the optional structure specific
+ information that provides the second
+ level details for the requested error.
+
+ @param ErrorDataBuffer 64-bit physical address of a buffer
+ providing additional parameters for
+ the requested error. The address of
+ this buffer must be 8-byte aligned.
+
+ @return R9 64-bit vector specifying the supported error
+ injection capabilities for the input argument
+ combination of struct_hier, err_struct and
+ err_sev fields in ErrorTypeInfo.
+
+ @return R10 64-bit vector specifying the architectural
+ resources that are used by the procedure.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -4 - Call completed with error; the requested
+ error could not be injected due to failure in
+ locating the target location in the specified
+ structure.
+
+ @return Status -5 - Argument was valid, but requested error
+ injection capability is not supported.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_MC_ERROR_INJECT 276
+
+
+//
+// Types of PAL_GET_PSTATE.Type
+//
+#define PAL_GET_PSTATE_RECENT 0
+#define PAL_GET_PSTATE_AVERAGE_NEW_START 1
+#define PAL_GET_PSTATE_AVERAGE 2
+#define PAL_GET_PSTATE_NOW 3
+
+/**
+
+ PAL Procedure - PAL_GET_PSTATE.
+
+ Returns the performance index of the processor. It is optional
+ by IPF. The PAL procedure supports the Stacked Registers
+ calling convention. It could be called at physical and Virtual
+ mode.
+
+
+ @param Index Index of PAL_GET_PSTATE within the list of PAL
+ procedures.
+
+ @param Type Type of performance_index value to be returned
+ by this procedure.See PAL_GET_PSTATE.Type above.
+
+
+ @return R9 Unsigned integer denoting the processor
+ performance for the time duration since the last
+ PAL_GET_PSTATE procedure call was made. The
+ value returned is between 0 and 100, and is
+ relative to the performance index of the highest
+ available P-state.
+
+ @return Status 1 - Call completed without error, but accuracy
+ of performance index has been impacted by a
+ thermal throttling event, or a
+ hardware-initiated event.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_GET_PSTATE 262
+
+/**
+
+ Layout of PAL_PSTATE_INFO.PStateBuffer
+
+**/
+typedef struct {
+ UINT32 PerformanceIndex:7;
+ UINT32 Reserved1:5;
+ UINT32 TypicalPowerDissipation:20;
+ UINT32 TransitionLatency1;
+ UINT32 TransitionLatency2;
+ UINT32 Reserved2;
+} PAL_PSTATE_INFO_BUFFER;
+
+
+/**
+
+ PAL Procedure - PAL_PSTATE_INFO.
+
+ Returns information about the P-states supported by the
+ processor. It is optional by IPF. The PAL procedure supports
+ the Static Registers calling convention. It could be called
+ at physical and Virtual mode.
+
+
+ @param Index Index of PAL_PSTATE_INFO within the list of PAL
+ procedures.
+
+ @param PStateBuffer 64-bit pointer to a 256-byte buffer
+ aligned on an 8-byte boundary. See
+ PAL_PSTATE_INFO_BUFFER above.
+
+
+ @return R9 Unsigned integer denoting the number of P-states
+ supported. The maximum value of this field is 16.
+
+ @return R10 Dependency domain information
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+**/
+#define PAL_PSTATE_INFO 44
+
+
+/**
+
+ PAL Procedure - PAL_SET_PSTATE.
+
+ To request a processor transition to a given P-state. It is
+ optional by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at physical
+ and Virtual mode.
+
+
+ @param Index Index of PAL_SET_PSTATE within the list of PAL
+ procedures.
+
+ @param PState Unsigned integer denoting the processor
+ P-state being requested.
+
+ @param ForcePState Unsigned integer denoting whether the
+ P-state change should be forced for the
+ logical processor.
+
+
+
+
+
+ @return Status 1 - Call completed without error, but
+ transition request was not accepted
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_SET_PSTATE 263
+
+/**
+
+ PAL Procedure - PAL_SHUTDOWN.
+
+ Put the logical processor into a low power state which can be
+ exited only by a reset event. It is optional by IPF. The PAL
+ procedure supports the Static Registers calling convention. It
+ could be called at physical mode.
+
+
+ @param Index Index of PAL_SHUTDOWN within the list of PAL
+ procedures.
+
+ @param NotifyPlatform 8-byte aligned physical address
+ pointer providing details on how to
+ optionally notify the platform that
+ the processor is entering a shutdown
+ state.
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_SHUTDOWN 45
+
+/**
+
+ Layout of PAL_MEMORY_BUFFER.ControlWord
+
+**/
+typedef struct {
+ UINT64 Registration:1;
+ UINT64 ProbeInterrupt:1;
+ UINT64 Reserved:62;
+} PAL_MEMORY_CONTROL_WORD;
+
+/**
+
+ PAL Procedure - PAL_MEMORY_BUFFER.
+
+ Provides cacheable memory to PAL for exclusive use during
+ runtime. It is optional by IPF. The PAL procedure supports the
+ Static Registers calling convention. It could be called at
+ physical mode.
+
+
+ @param Index Index of PAL_MEMORY_BUFFER within the list of PAL
+ procedures.
+
+ @param BaseAddress Physical address of the memory buffer
+ allocated for PAL use.
+
+ @param AllocSize Unsigned integer denoting the size of the
+ memory buffer.
+
+ @param ControlWord Formatted bit vector that provides control
+ options for this procedure. See
+ PAL_MEMORY_CONTROL_WORD above.
+
+ @return R9 Returns the minimum size of the memory buffer
+ required if the alloc_size input argument was
+ not large enough.
+
+ @return Status 1 - Call has not completed a buffer relocation
+ due to a pending interrupt
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_MEMORY_BUFFER 277
+
+
+/**
+
+ PAL Procedure - PAL_VP_CREATE.
+
+ Initializes a new vpd for the operation of a new virtual
+ processor in the virtual environment. It is optional by IPF.
+ The PAL procedure supports the Stacked Registers calling
+ convention. It could be called at Virtual mode.
+
+
+ @param Index Index of PAL_VP_CREATE within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD).
+
+ @param HostIva 64-bit host virtual pointer to the host IVT
+ for the virtual processor
+
+ @param OptionalHandler 64-bit non-zero host-virtual pointer
+ to an optional handler for
+ virtualization intercepts.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_CREATE 265
+
+/**
+
+ Virtual Environment Information Parameter
+
+**/
+typedef struct {
+ UINT64 Reserved1:8;
+ UINT64 Opcode:1;
+ UINT64 Reserved:53;
+} PAL_VP_ENV_INFO_RETURN;
+
+/**
+
+ PAL Procedure - PAL_VP_ENV_INFO.
+
+ Returns the parameters needed to enter a virtual environment.
+ It is optional by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at Virtual
+ mode.
+
+
+ @param Index Index of PAL_VP_ENV_INFO within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD).
+
+ @param HostIva 64-bit host virtual pointer to the host IVT
+ for the virtual processor
+
+ @param OptionalHandler 64-bit non-zero host-virtual pointer
+ to an optional handler for
+ virtualization intercepts.
+ @return R9 Unsigned integer denoting the number of bytes
+ required by the PAL virtual environment buffer
+ during PAL_VP_INIT_ENV
+
+ @return R10 64-bit vector of virtual environment
+ information. See PAL_VP_ENV_INFO_RETURN.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_ENV_INFO 266
+
+/**
+
+ PAL Procedure - PAL_VP_EXIT_ENV.
+
+ Allows a logical processor to exit a virtual environment.
+ It is optional by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at Virtual
+ mode.
+
+
+ @param Index Index of PAL_VP_EXIT_ENV within the list of PAL
+ procedures.
+
+ @param Iva Optional 64-bit host virtual pointer to the IVT
+ when this procedure is done
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_EXIT_ENV 267
+
+
+
+/**
+
+ PAL Procedure - PAL_VP_INIT_ENV.
+
+ Allows a logical processor to enter a virtual environment. It
+ is optional by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at Virtual
+ mode.
+
+
+ @param Index Index of PAL_VP_INIT_ENV within the list of PAL
+ procedures.
+
+ @param ConfigOptions 64-bit vector of global configuration
+ settings.
+
+ @param PhysicalBase Host physical base address of a block of
+ contiguous physical memory for the PAL
+ virtual environment buffer 1) This
+ memory area must be allocated by the VMM
+ and be 4K aligned. The first logical
+ processor to enter the environment will
+ initialize the physical block for
+ virtualization operations.
+
+ @param VirtualBase Host virtual base address of the
+ corresponding physical memory block for
+ the PAL virtual environment buffer : The
+ VMM must maintain the host virtual to host
+ physical data and instruction translations
+ in TRs for addresses within the allocated
+ address space. Logical processors in this
+ virtual environment will use this address
+ when transitioning to virtual mode
+ operations.
+
+ @return R9 Virtualization Service Address ¨C VSA specifies
+ the virtual base address of the PAL
+ virtualization services in this virtual
+ environment.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_INIT_ENV 268
+
+
+/**
+
+ PAL Procedure - PAL_VP_REGISTER.
+
+ Register a different host IVT and/or a different optional
+ virtualization intercept handler for the virtual processor
+ specified by vpd. It is optional by IPF. The PAL procedure
+ supports the Stacked Registers calling convention. It could be
+ called at Virtual mode.
+
+
+ @param Index Index of PAL_VP_REGISTER within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD) host_iva 64-bit host
+ virtual pointer to the host IVT for the virtual
+ processor
+
+ @param OptionalHandler 64-bit non-zero host-virtual pointer
+ to an optional handler for
+ virtualization intercepts.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_REGISTER 269
+
+
+/**
+
+ PAL Procedure - PAL_VP_RESTORE.
+
+ Restores virtual processor state for the specified vpd on the
+ logical processor. It is optional by IPF. The PAL procedure
+ supports the Stacked Registers calling convention. It could be
+ called at Virtual mode.
+
+
+ @param Index Index of PAL_VP_RESTORE within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD) host_iva 64-bit host
+ virtual pointer to the host IVT for the virtual
+ processor
+
+ @param PalVector Vector specifies PAL procedure
+ implementation-specific state to be
+ restored.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_RESTORE 270
+
+/**
+
+ PAL Procedure - PAL_VP_SAVE.
+
+ Saves virtual processor state for the specified vpd on the
+ logical processor. It is optional by IPF. The PAL procedure
+ supports the Stacked Registers calling convention. It could be
+ called at Virtual mode.
+
+
+ @param Index Index of PAL_VP_SAVE within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD) host_iva 64-bit host
+ virtual pointer to the host IVT for the virtual
+ processor
+
+ @param PalVector Vector specifies PAL procedure
+ implementation-specific state to be
+ restored.
+
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_SAVE 271
+
+
+/**
+
+ PAL Procedure - PAL_VP_TERMINATE.
+
+ Terminates operation for the specified virtual processor. It
+ is optional by IPF. The PAL procedure supports the Stacked
+ Registers calling convention. It could be called at Virtual
+ mode.
+
+
+ @param Index Index of PAL_VP_TERMINATE within the list of PAL
+ procedures.
+
+ @param Vpd 64-bit host virtual pointer to the Virtual
+ Processor Descriptor (VPD)
+
+ @param Iva Optional 64-bit host virtual pointer to the IVT
+ when this procedure is done.
+
+ @return Status 0 - Call completed without error
+
+ @return Status -1 - Unimplemented procedure
+
+ @return Status -2 - Invalid argument
+
+ @return Status -3 - Call completed with error.
+
+ @return Status -9 - Call requires PAL memory buffer.
+
+**/
+#define PAL_VP_TERMINATE 272
/**
Makes a PAL procedure call.
|