diff options
Diffstat (limited to 'ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c')
-rw-r--r-- | ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c | 256 |
1 files changed, 0 insertions, 256 deletions
diff --git a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c b/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c deleted file mode 100644 index 16798e9ba9..0000000000 --- a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c +++ /dev/null @@ -1,256 +0,0 @@ -/** @file
-
- Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
- Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <Base.h>
-
-#include <Library/BaseLib.h>
-#include <Library/TimerLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Drivers/SP804Timer.h>
-
-#define SP804_TIMER_METRONOME_BASE ((UINTN)PcdGet32 (PcdSP804TimerMetronomeBase))
-#define SP804_TIMER_PERFORMANCE_BASE ((UINTN)PcdGet32 (PcdSP804TimerPerformanceBase))
-
-// Setup SP810's Timer2 for managing delay functions. And Timer3 for Performance counter
-// Note: ArmVE's Timer0 and Timer1 are used by TimerDxe.
-RETURN_STATUS
-EFIAPI
-TimerConstructor (
- VOID
- )
-{
- // Check if the Metronome Timer is already initialized
- if ((MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) == 0) {
- // Configure the Metronome Timer for free running operation, 32 bits, no prescaler, and interrupt disabled
- MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
-
- // Start the Metronome Timer ticking
- MmioOr32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
- }
-
- // Check if the Performance Timer is already initialized
- if ((MmioRead32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) == 0) {
- // Configure the Performance timer for free running operation, 32 bits, no prescaler, interrupt disabled
- MmioWrite32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
-
- // Start the Performance Timer ticking
- MmioOr32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
- }
-
- return RETURN_SUCCESS;
-}
-
-/**
- Stalls the CPU for at least the given number of microseconds.
-
- Stalls the CPU for the number of microseconds specified by MicroSeconds.
- The hardware timer is 32 bits.
- The maximum possible delay is (0xFFFFFFFF / TimerFrequencyMHz), i.e. ([32bits] / FreqInMHz)
- For example:
- +----------------+------------+----------+----------+
- | TimerFrequency | MaxDelay | MaxDelay | MaxDelay |
- | (MHz) | (us) | (s) | (min) |
- +----------------+------------+----------+----------+
- | 1 | 0xFFFFFFFF | 4294 | 71.5 |
- | 5 | 0x33333333 | 859 | 14.3 |
- | 10 | 0x19999999 | 429 | 7.2 |
- | 50 | 0x051EB851 | 86 | 1.4 |
- +----------------+------------+----------+----------+
- If it becomes necessary to support higher delays, then consider using the
- real time clock.
-
- During this delay, the cpu is not yielded to any other process, with one exception:
- events that are triggered off a timer and which execute at a higher TPL than
- this function. These events may call MicroSecondDelay (or NanoSecondDelay) to
- fulfil their own needs.
- Therefore, this function must be re-entrant, as it may be interrupted and re-started.
-
- @param MicroSeconds The minimum number of microseconds to delay.
-
- @return The value of MicroSeconds inputted.
-
-**/
-UINTN
-EFIAPI
-MicroSecondDelay (
- IN UINTN MicroSeconds
- )
-{
- UINT64 DelayTicks64; // Convert from microseconds to timer ticks, more bits to detect over-range conditions.
- UINTN DelayTicks; // Convert from microseconds to timer ticks, native size for general calculations.
- UINTN StartTicks; // Timer value snapshot at the start of the delay
- UINTN TargetTicks; // Timer value to signal the end of the delay
- UINTN CurrentTicks; // Current value of the 64-bit timer value at any given moment
-
- // If we snapshot the timer at the start of the delay function then we minimise unaccounted overheads.
- StartTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
-
- // We are operating at the limit of 32bits. For the range checking work in 64 bits to avoid overflows.
- DelayTicks64 = MultU64x32((UINT64)MicroSeconds, PcdGet32(PcdSP804TimerFrequencyInMHz));
-
- // We are limited to 32 bits.
- // If the specified delay is exactly equal to the max range of the timer,
- // then the start will be equal to the stop plus one timer overflow (wrap-around).
- // To avoid having to check for that, reduce the maximum acceptable range by 1 tick,
- // i.e. reject delays equal or greater than the max range of the timer.
- if (DelayTicks64 >= (UINT64)SP804_MAX_TICKS) {
- DEBUG((EFI_D_ERROR,"MicroSecondDelay: ERROR: MicroSeconds=%d exceed SP804 count range. Max MicroSeconds=%d\n",
- MicroSeconds,
- ((UINTN)SP804_MAX_TICKS/PcdGet32(PcdSP804TimerFrequencyInMHz))));
- }
- ASSERT(DelayTicks64 < (UINT64)SP804_MAX_TICKS);
-
- // From now on do calculations only in native bit size.
- DelayTicks = (UINTN)DelayTicks64;
-
- // Calculate the target value of the timer.
-
- //Note: SP804 timer is counting down
- if (StartTicks >= DelayTicks) {
- // In this case we do not expect a wrap-around of the timer to occur.
- // CurrentTicks must be less than StartTicks and higher than TargetTicks.
- // If this is not the case, then the delay has been reached and may even have been exceeded if this
- // function was suspended by a higher priority interrupt.
-
- TargetTicks = StartTicks - DelayTicks;
-
- do {
- CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
- } while ((CurrentTicks > TargetTicks) && (CurrentTicks <= StartTicks));
-
- } else {
- // In this case TargetTicks is larger than StartTicks.
- // This means we expect a wrap-around of the timer to occur and we must wait for it.
- // Before the wrap-around, CurrentTicks must be less than StartTicks and less than TargetTicks.
- // After the wrap-around, CurrentTicks must be larger than StartTicks and larger than TargetTicks.
- // If this is not the case, then the delay has been reached and may even have been exceeded if this
- // function was suspended by a higher priority interrupt.
-
- // The order of operations is essential to avoid arithmetic overflow problems
- TargetTicks = ((UINTN)SP804_MAX_TICKS - DelayTicks) + StartTicks;
-
- // First wait for the wrap-around to occur
- do {
- CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
- } while (CurrentTicks <= StartTicks);
-
- // Then wait for the target
- do {
- CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
- } while (CurrentTicks > TargetTicks);
- }
-
- return MicroSeconds;
-}
-
-/**
- Stalls the CPU for at least the given number of nanoseconds.
-
- Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
-
- When the timer frequency is 1MHz, each tick corresponds to 1 microsecond.
- Therefore, the nanosecond delay will be rounded up to the nearest 1 microsecond.
-
- @param NanoSeconds The minimum number of nanoseconds to delay.
-
- @return The value of NanoSeconds inputted.
-
-**/
-UINTN
-EFIAPI
-NanoSecondDelay (
- IN UINTN NanoSeconds
- )
-{
- UINTN MicroSeconds;
-
- // Round up to 1us Tick Number
- MicroSeconds = NanoSeconds / 1000;
- MicroSeconds += ((NanoSeconds % 1000) == 0) ? 0 : 1;
-
- MicroSecondDelay (MicroSeconds);
-
- return NanoSeconds;
-}
-
-/**
- Retrieves the current value of a 64-bit free running performance counter.
-
- The counter can either count up by 1 or count down by 1. If the physical
- performance counter counts by a larger increment, then the counter values
- must be translated. The properties of the counter can be retrieved from
- GetPerformanceCounterProperties().
-
- @return The current value of the free running performance counter.
-
-**/
-UINT64
-EFIAPI
-GetPerformanceCounter (
- VOID
- )
-{
- // Free running 64-bit/32-bit counter is needed here.
- // Don't think we need this to boot, just to do performance profile
- UINT64 Value;
- Value = MmioRead32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CURRENT_REG);
- return Value;
-}
-
-
-/**
- Retrieves the 64-bit frequency in Hz and the range of performance counter
- values.
-
- If StartValue is not NULL, then the value that the performance counter starts
- with immediately after is it rolls over is returned in StartValue. If
- EndValue is not NULL, then the value that the performance counter end with
- immediately before it rolls over is returned in EndValue. The 64-bit
- frequency of the performance counter in Hz is always returned. If StartValue
- is less than EndValue, then the performance counter counts up. If StartValue
- is greater than EndValue, then the performance counter counts down. For
- example, a 64-bit free running counter that counts up would have a StartValue
- of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
- that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
-
- @param StartValue The value the performance counter starts with when it
- rolls over.
- @param EndValue The value that the performance counter ends with before
- it rolls over.
-
- @return The frequency in Hz.
-
-**/
-UINT64
-EFIAPI
-GetPerformanceCounterProperties (
- OUT UINT64 *StartValue, OPTIONAL
- OUT UINT64 *EndValue OPTIONAL
- )
-{
- if (StartValue != NULL) {
- // Timer starts with the reload value
- *StartValue = 0xFFFFFFFF;
- }
-
- if (EndValue != NULL) {
- // Timer counts down to 0x0
- *EndValue = (UINT64)0ULL;
- }
-
- return PcdGet64 (PcdEmbeddedPerformanceCounterFrequencyInHz);
-}
|