diff options
Diffstat (limited to 'BaseTools/Conf/build_rule.template')
| -rw-r--r-- | BaseTools/Conf/build_rule.template | 542 |
1 files changed, 542 insertions, 0 deletions
diff --git a/BaseTools/Conf/build_rule.template b/BaseTools/Conf/build_rule.template new file mode 100644 index 0000000000..107e783d2e --- /dev/null +++ b/BaseTools/Conf/build_rule.template @@ -0,0 +1,542 @@ +#
+# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+# Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+## Syntax
+#
+# "*" is used to indicate that the source files will be processed at the same time.
+# "?" is used to indicate that the source files will be processed one by one.
+#
+# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
+# <InputFile[.<ToolChainFamily>]> <EOL>
+# (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
+#
+# <OutputFile[.<ToolChainFamily>]> <EOL>
+# <FileFullPath>
+#
+# <ExtraDependency>
+# <FileFullPath>
+#
+# <Command[.<ToolChainFamily>]> <EOL>
+# <Command1>
+# [<Command2>]
+#
+# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE in EDK.
+# Missing <InputFile> will cause an exception and break build.
+# Missing <Command> will cause that related build target won't be generated but
+# won't break build.
+#
+
+## Placeholders for string substitution
+#
+# ${src} Source file(s) to be built (full path)
+# ${s_path} Source file directory (absolute path)
+# ${s_dir} Source file relative directory within a module
+# (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
+# ${s_name} Source file name without path
+# ${s_base} Source file name without extension and path
+# ${s_ext} Source file extension
+#
+# ${dst} Destination file(s) built from ${src} (full path)
+# ${d_path} Destination file directory (absolute path)
+# ${d_name} Destination file name without path
+# ${d_base} Destination file name without extension and path
+# ${d_ext} Destination file extension
+#
+# (+) Directory separator
+#
+
+## Macro
+# $(WORKSPACE) Workspace directory
+# $(OUTPUT_DIR) Directory for intermediate files for building a module
+# $(DEBUG_DIR) Directory for files used to debug a module
+# $(BUILD_DIR) All files for building a platform will be put in this directory
+# $(BIN_DIR) Common directory for executable files
+# $(FV_DIR) Directory to store flash image files
+# $(INC) Search path of current module
+# $(INC_LIST) A file containing search pathes of current module
+# $(LIBS) Static library files of current module
+# $(<tool>_FLAGS) Tools flags of current module
+# $(MODULE_NAME) Current module name
+# $(MODULE_TYPE) Current module type
+# $(MODULE_GUID) Current module guid
+# $(ARCH) Architecture of current module
+# $(TOOLCHAIN) Toolchain used to build current module
+# $(TARGET) Target of current module (DEBUG/RELEASE)
+# $(<tool>) Path of tool
+# $(EDK_TOOLS_PATH) Path of build tools
+# $(<FILE_TYPES>) File list of each file type
+# (Note: The macro name is derived from file type name. For example,
+# C-Code-File will have C_CODE_FILES macro.)
+# $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
+# (
+# Note: The macro and file name are derived from file type name.
+# For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
+# to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
+# will be generated only when this macro is used in command line.
+# This is intended to get over the long command line limitation.
+# )
+#
+# $(CP) copy command
+# $(MV) move command
+# $(RM) delete command
+# $(MD) create dir command
+# $(RD) remove dir command
+#
+
+## Reserved File-Type
+#
+# Don't change following names of file types and their associated files,
+# which are also used in tools' code
+#
+# C-Code-File
+# C-Header-File
+# Dynamic-Library-File
+# Static-Library-File
+# Visual-Form-Representation-File
+# Unicode-Text-File
+#
+
+## Build Rule Version Number
+# build_rule_version=0.1
+#
+
+[C-Code-File]
+ <InputFile>
+ ?.c
+ ?.C
+ ?.cc
+ ?.CC
+ ?.cpp
+ ?.Cpp
+ ?.CPP
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+
+ <Command.MSFT, Command.INTEL>
+ "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
+
+ <Command.GCC, Command.RVCT>
+ # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
+ "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
+ "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
+
+ <Command.ARMGCC, Command.ARMLINUXGCC>
+ "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
+
+
+[C-Header-File]
+ <InputFile>
+ *.h, *.H
+
+ <OutputFile>
+
+ <Command>
+
+
+[Assembly-Code-File.COMMON.COMMON]
+ <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
+ ?.asm, ?.Asm, ?.ASM
+
+ <InputFile.GCC>
+ ?.S, ?.s
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+
+ <Command.MSFT, Command.INTEL>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
+
+ <Command.GCC, Command.RVCT>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
+ "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
+
+[Assembly-Code-File.COMMON.IPF]
+ <InputFile>
+ ?.s
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+
+ <Command.MSFT, Command.INTEL>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
+ "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
+
+[Visual-Form-Representation-File]
+ <InputFile>
+ ?.vfr
+ ?.Vfr
+ ?.VFR
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
+
+ <Command>
+ "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
+ "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
+
+[Object-File]
+ <InputFile>
+ *.obj
+ *.o
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
+
+ <Command.MSFT, Command.INTEL>
+ "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
+
+ <Command.GCC>
+ "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
+
+ <Command.RVCT>
+ "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
+
+ <Command.RVCTCYGWIN, Command.ARMGCC, Command.ARMLINUXGCC>
+ # $(OBJECT_FILES_LIST) has wrong paths for cygwin
+ "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
+
+ <Command.XCODE>
+ "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
+
+[Static-Library-File]
+ <InputFile>
+ *.lib
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(DEBUG_DIR)(+)$(MODULE_NAME).dll
+
+ <Command.MSFT, Command.INTEL>
+ "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
+
+ <Command.GCC>
+ "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
+ "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
+
+ <Command.ARMGCC, Command.ARMLINUXGCC>
+ "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -\) $(DLINK2_FLAGS)
+
+ <Command.RVCT>
+ "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
+
+ <Command.RVCTCYGWIN>
+ #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
+ "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
+
+ <Command.XCODE>
+ "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
+
+
+[Static-Library-File.USER_DEFINED]
+ <InputFile>
+ *.lib
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(DEBUG_DIR)(+)$(MODULE_NAME)
+
+ <Command.MSFT, Command.INTEL>
+ "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
+
+ <Command.GCC>
+ "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
+
+ <Command.ARMGCC, Command.ARMLINUXGCC>
+ "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -\) $(DLINK2_FLAGS)
+
+ <Command.RVCT>
+ "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
+
+ <Command.RVCTCYGWIN>
+ #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
+ "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
+
+ <Command.XCODE>
+ "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
+
+
+[Dynamic-Library-File]
+ <InputFile>
+ ?.dll
+
+ <OutputFile>
+ $(DEBUG_DIR)(+)$(MODULE_NAME).efi
+
+ <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
+ "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
+ $(CP) ${dst} $(OUTPUT_DIR)
+ $(CP) ${dst} $(BIN_DIR)
+ -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
+
+ <Command.GCC>
+ $(OBJCOPY) --only-keep-debug ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
+ $(OBJCOPY) --strip-unneeded ${src}
+
+ #
+ #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
+ #
+ -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
+ -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)
+
+ "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
+ $(CP) ${dst} $(OUTPUT_DIR)
+ $(CP) ${dst} $(BIN_DIR)
+ -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
+
+ <Command.XCODE>
+ # tool to convert Mach-O to PE/COFF
+ "$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
+ # create symbol file for GDB debug
+ -$(DSYMUTIL) ${src}
+ "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
+ $(CP) ${dst} $(OUTPUT_DIR)
+ $(CP) ${dst} $(BIN_DIR)
+ -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
+
+[Dependency-Expression-File]
+ <InputFile>
+ ?.dxs, ?.Dxs, ?.DXS
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <Command>
+ "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+ Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+ GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+
+[Acpi-Source-Language-File]
+ <InputFile>
+ ?.asl, ?.Asl, ?.ASL
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <Command.MSFT, Command.INTEL>
+ Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+ Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+ "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
+
+ <Command.GCC>
+ Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+ "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+
+[C-Code-File.AcpiTable]
+ <InputFile>
+ ?.c
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <Command.MSFT, Command.INTEL>
+ "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
+
+ <Command.GCC>
+ "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
+
+[Acpi-Table-Code-File]
+ <InputFile>
+ ?.aslc, ?.act
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <Command.MSFT, Command.INTEL>
+ "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
+
+ <Command.GCC>
+ "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
+
+ <Command.XCODE>
+ "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ "$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
+ "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
+
+
+[Masm16-Code-File]
+ <InputFile>
+ ?.asm16, ?.Asm16, ?.ASM16
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_base}.com
+
+ <Command.MSFT, Command.INTEL>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ cd $(OUTPUT_DIR)(+)${s_dir}
+ "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
+ "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
+
+ <Command.GCC>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
+ "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -\)
+
+ <Command.XCODE>
+ "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
+ "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
+ otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
+
+
+[Microcode-File.USER_DEFINED, Microcode-File.Microcode]
+ <InputFile>
+ ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_base}.mcb
+
+ <Command>
+ "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
+
+[Microcode-Binary-File]
+ <InputFile>
+ *.mcb
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
+
+ <Command>
+ "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
+ -$(CP) ${dst} $(BIN_DIR)
+
+[EFI-Image-File]
+ <InputFile>
+ ?.efi, ?.Efi, ?.EFI
+
+ <OutputFile>
+
+ <Command>
+
+[Unicode-Text-File]
+ <InputFile>
+ *.uni, *.Uni, *.UNI
+
+ <OutputFile>
+ $(DEBUG_DIR)(+)AutoGen.c
+ $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
+ $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
+
+ <Command>
+
+[Efi-Image.UEFI_OPTIONROM]
+ <InputFile>
+ ?.efi, ?.EFI, ?.Efi
+
+ <OutputFile>
+ $(BIN_DIR)(+)$(MODULE_NAME).rom
+
+ <Command>
+ $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
+
+[Unicode-Text-File.UEFI_HII]
+ <InputFile>
+ *.uni, *.Uni, *.UNI
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
+ $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
+
+ <Command>
+
+[Visual-Form-Representation-File.UEFI_HII]
+ <InputFile>
+ ?.vfr
+ ?.Vfr
+ ?.VFR
+
+ <ExtraDependency>
+ $(MAKE_FILE)
+
+ <OutputFile>
+ $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
+
+ <Command>
+ "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+ "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+
+[Hii-Binary-Package.UEFI_HII]
+ <InputFile>
+ *.hpk
+
+ <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
+
+ <OutputFile.XCODE, OutputFile.RVCT, OutputFile.ARMGCC>
+ $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
+
+ <Command.MSFT, Command.INTEL>
+ "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
+ "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
+
+ <Command.GCC>
+ "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
+ "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
+
+ <Command.XCODE, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
+ GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
+
+
|