diff options
Diffstat (limited to 'MdePkg/Include/IndustryStandard/Sd.h')
| -rw-r--r-- | MdePkg/Include/IndustryStandard/Sd.h | 266 |
1 files changed, 133 insertions, 133 deletions
diff --git a/MdePkg/Include/IndustryStandard/Sd.h b/MdePkg/Include/IndustryStandard/Sd.h index bcecf0a162..33c66d7864 100644 --- a/MdePkg/Include/IndustryStandard/Sd.h +++ b/MdePkg/Include/IndustryStandard/Sd.h @@ -15,44 +15,44 @@ //
// SD command index
//
-#define SD_GO_IDLE_STATE 0
-#define SD_ALL_SEND_CID 2
-#define SD_SET_RELATIVE_ADDR 3
-#define SD_SET_DSR 4
-#define SDIO_SEND_OP_COND 5
-#define SD_SWITCH_FUNC 6
-#define SD_SELECT_DESELECT_CARD 7
-#define SD_SEND_IF_COND 8
-#define SD_SEND_CSD 9
-#define SD_SEND_CID 10
-#define SD_VOLTAGE_SWITCH 11
-#define SD_STOP_TRANSMISSION 12
-#define SD_SEND_STATUS 13
-#define SD_GO_INACTIVE_STATE 15
-#define SD_SET_BLOCKLEN 16
-#define SD_READ_SINGLE_BLOCK 17
-#define SD_READ_MULTIPLE_BLOCK 18
-#define SD_SEND_TUNING_BLOCK 19
-#define SD_SPEED_CLASS_CONTROL 20
-#define SD_SET_BLOCK_COUNT 23
-#define SD_WRITE_SINGLE_BLOCK 24
-#define SD_WRITE_MULTIPLE_BLOCK 25
-#define SD_PROGRAM_CSD 27
-#define SD_SET_WRITE_PROT 28
-#define SD_CLR_WRITE_PROT 29
-#define SD_SEND_WRITE_PROT 30
-#define SD_ERASE_WR_BLK_START 32
-#define SD_ERASE_WR_BLK_END 33
-#define SD_ERASE 38
-#define SD_LOCK_UNLOCK 42
-#define SD_READ_EXTR_SINGLE 48
-#define SD_WRITE_EXTR_SINGLE 49
-#define SDIO_RW_DIRECT 52
-#define SDIO_RW_EXTENDED 53
-#define SD_APP_CMD 55
-#define SD_GEN_CMD 56
-#define SD_READ_EXTR_MULTI 58
-#define SD_WRITE_EXTR_MULTI 59
+#define SD_GO_IDLE_STATE 0
+#define SD_ALL_SEND_CID 2
+#define SD_SET_RELATIVE_ADDR 3
+#define SD_SET_DSR 4
+#define SDIO_SEND_OP_COND 5
+#define SD_SWITCH_FUNC 6
+#define SD_SELECT_DESELECT_CARD 7
+#define SD_SEND_IF_COND 8
+#define SD_SEND_CSD 9
+#define SD_SEND_CID 10
+#define SD_VOLTAGE_SWITCH 11
+#define SD_STOP_TRANSMISSION 12
+#define SD_SEND_STATUS 13
+#define SD_GO_INACTIVE_STATE 15
+#define SD_SET_BLOCKLEN 16
+#define SD_READ_SINGLE_BLOCK 17
+#define SD_READ_MULTIPLE_BLOCK 18
+#define SD_SEND_TUNING_BLOCK 19
+#define SD_SPEED_CLASS_CONTROL 20
+#define SD_SET_BLOCK_COUNT 23
+#define SD_WRITE_SINGLE_BLOCK 24
+#define SD_WRITE_MULTIPLE_BLOCK 25
+#define SD_PROGRAM_CSD 27
+#define SD_SET_WRITE_PROT 28
+#define SD_CLR_WRITE_PROT 29
+#define SD_SEND_WRITE_PROT 30
+#define SD_ERASE_WR_BLK_START 32
+#define SD_ERASE_WR_BLK_END 33
+#define SD_ERASE 38
+#define SD_LOCK_UNLOCK 42
+#define SD_READ_EXTR_SINGLE 48
+#define SD_WRITE_EXTR_SINGLE 49
+#define SDIO_RW_DIRECT 52
+#define SDIO_RW_EXTENDED 53
+#define SD_APP_CMD 55
+#define SD_GEN_CMD 56
+#define SD_READ_EXTR_MULTI 58
+#define SD_WRITE_EXTR_MULTI 59
#define SD_SET_BUS_WIDTH 6 // ACMD6
#define SD_STATUS 13 // ACMD13
@@ -64,110 +64,110 @@ #pragma pack(1)
typedef struct {
- UINT8 NotUsed:1; // Not used [0:0]
- UINT8 Crc:7; // CRC [7:1]
- UINT16 ManufacturingDate:12; // Manufacturing date [19:8]
- UINT16 Reserved:4; // Reserved [23:20]
- UINT8 ProductSerialNumber[4]; // Product serial number [55:24]
- UINT8 ProductRevision; // Product revision [63:56]
- UINT8 ProductName[5]; // Product name [103:64]
- UINT8 OemId[2]; // OEM/Application ID [119:104]
- UINT8 ManufacturerId; // Manufacturer ID [127:120]
+ UINT8 NotUsed : 1; // Not used [0:0]
+ UINT8 Crc : 7; // CRC [7:1]
+ UINT16 ManufacturingDate : 12; // Manufacturing date [19:8]
+ UINT16 Reserved : 4; // Reserved [23:20]
+ UINT8 ProductSerialNumber[4]; // Product serial number [55:24]
+ UINT8 ProductRevision; // Product revision [63:56]
+ UINT8 ProductName[5]; // Product name [103:64]
+ UINT8 OemId[2]; // OEM/Application ID [119:104]
+ UINT8 ManufacturerId; // Manufacturer ID [127:120]
} SD_CID;
typedef struct {
- UINT32 NotUsed:1; // Not used [0:0]
- UINT32 Crc:7; // CRC [7:1]
- UINT32 Reserved:2; // Reserved [9:8]
- UINT32 FileFormat:2; // File format [11:10]
- UINT32 TmpWriteProtect:1; // Temporary write protection [12:12]
- UINT32 PermWriteProtect:1; // Permanent write protection [13:13]
- UINT32 Copy:1; // Copy flag (OTP) [14:14]
- UINT32 FileFormatGrp:1; // File format group [15:15]
- UINT32 Reserved1:5; // Reserved [20:16]
- UINT32 WriteBlPartial:1; // Partial blocks for write allowed [21:21]
- UINT32 WriteBlLen:4; // Max. write data block length [25:22]
- UINT32 R2WFactor:3; // Write speed factor [28:26]
- UINT32 Reserved2:2; // Manufacturer default ECC [30:29]
- UINT32 WpGrpEnable:1; // Write protect group enable [31:31]
-
- UINT32 WpGrpSize:7; // Write protect group size [38:32]
- UINT32 SectorSize:7; // Erase sector size [45:39]
- UINT32 EraseBlkEn:1; // Erase single block enable [46:46]
- UINT32 CSizeMul:3; // device size multiplier [49:47]
- UINT32 VddWCurrMax:3; // max. write current @VDD max [52:50]
- UINT32 VddWCurrMin:3; // max. write current @VDD min [55:53]
- UINT32 VddRCurrMax:3; // max. read current @VDD max [58:56]
- UINT32 VddRCurrMin:3; // max. read current @VDD min [61:59]
- UINT32 CSizeLow:2; // Device size low 2 bits [63:62]
-
- UINT32 CSizeHigh:10; // Device size high 10 bits [73:64]
- UINT32 Reserved4:2; // Reserved [75:74]
- UINT32 DsrImp:1; // DSR implemented [76:76]
- UINT32 ReadBlkMisalign:1; // Read block misalignment [77:77]
- UINT32 WriteBlkMisalign:1; // Write block misalignment [78:78]
- UINT32 ReadBlPartial:1; // Partial blocks for read allowed [79:79]
- UINT32 ReadBlLen:4; // Max. read data block length [83:80]
- UINT32 Ccc:12; // Card command classes [95:84]
-
- UINT32 TranSpeed:8; // Max. data transfer rate [103:96]
- UINT32 Nsac:8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
- UINT32 Taac:8; // Data read access-time [119:112]
- UINT32 Reserved5:6; // Reserved [125:120]
- UINT32 CsdStructure:2; // CSD structure [127:126]
+ UINT32 NotUsed : 1; // Not used [0:0]
+ UINT32 Crc : 7; // CRC [7:1]
+ UINT32 Reserved : 2; // Reserved [9:8]
+ UINT32 FileFormat : 2; // File format [11:10]
+ UINT32 TmpWriteProtect : 1; // Temporary write protection [12:12]
+ UINT32 PermWriteProtect : 1; // Permanent write protection [13:13]
+ UINT32 Copy : 1; // Copy flag (OTP) [14:14]
+ UINT32 FileFormatGrp : 1; // File format group [15:15]
+ UINT32 Reserved1 : 5; // Reserved [20:16]
+ UINT32 WriteBlPartial : 1; // Partial blocks for write allowed [21:21]
+ UINT32 WriteBlLen : 4; // Max. write data block length [25:22]
+ UINT32 R2WFactor : 3; // Write speed factor [28:26]
+ UINT32 Reserved2 : 2; // Manufacturer default ECC [30:29]
+ UINT32 WpGrpEnable : 1; // Write protect group enable [31:31]
+
+ UINT32 WpGrpSize : 7; // Write protect group size [38:32]
+ UINT32 SectorSize : 7; // Erase sector size [45:39]
+ UINT32 EraseBlkEn : 1; // Erase single block enable [46:46]
+ UINT32 CSizeMul : 3; // device size multiplier [49:47]
+ UINT32 VddWCurrMax : 3; // max. write current @VDD max [52:50]
+ UINT32 VddWCurrMin : 3; // max. write current @VDD min [55:53]
+ UINT32 VddRCurrMax : 3; // max. read current @VDD max [58:56]
+ UINT32 VddRCurrMin : 3; // max. read current @VDD min [61:59]
+ UINT32 CSizeLow : 2; // Device size low 2 bits [63:62]
+
+ UINT32 CSizeHigh : 10; // Device size high 10 bits [73:64]
+ UINT32 Reserved4 : 2; // Reserved [75:74]
+ UINT32 DsrImp : 1; // DSR implemented [76:76]
+ UINT32 ReadBlkMisalign : 1; // Read block misalignment [77:77]
+ UINT32 WriteBlkMisalign : 1; // Write block misalignment [78:78]
+ UINT32 ReadBlPartial : 1; // Partial blocks for read allowed [79:79]
+ UINT32 ReadBlLen : 4; // Max. read data block length [83:80]
+ UINT32 Ccc : 12; // Card command classes [95:84]
+
+ UINT32 TranSpeed : 8; // Max. data transfer rate [103:96]
+ UINT32 Nsac : 8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
+ UINT32 Taac : 8; // Data read access-time [119:112]
+ UINT32 Reserved5 : 6; // Reserved [125:120]
+ UINT32 CsdStructure : 2; // CSD structure [127:126]
} SD_CSD;
typedef struct {
- UINT32 NotUsed:1; // Not used [0:0]
- UINT32 Crc:7; // CRC [7:1]
- UINT32 Reserved:2; // Reserved [9:8]
- UINT32 FileFormat:2; // File format [11:10]
- UINT32 TmpWriteProtect:1; // Temporary write protection [12:12]
- UINT32 PermWriteProtect:1; // Permanent write protection [13:13]
- UINT32 Copy:1; // Copy flag (OTP) [14:14]
- UINT32 FileFormatGrp:1; // File format group [15:15]
- UINT32 Reserved1:5; // Reserved [20:16]
- UINT32 WriteBlPartial:1; // Partial blocks for write allowed [21:21]
- UINT32 WriteBlLen:4; // Max. write data block length [25:22]
- UINT32 R2WFactor:3; // Write speed factor [28:26]
- UINT32 Reserved2:2; // Manufacturer default ECC [30:29]
- UINT32 WpGrpEnable:1; // Write protect group enable [31:31]
-
- UINT32 WpGrpSize:7; // Write protect group size [38:32]
- UINT32 SectorSize:7; // Erase sector size [45:39]
- UINT32 EraseBlkEn:1; // Erase single block enable [46:46]
- UINT32 Reserved3:1; // Reserved [47:47]
- UINT32 CSizeLow:16; // Device size low 16 bits [63:48]
-
- UINT32 CSizeHigh:6; // Device size high 6 bits [69:64]
- UINT32 Reserved4:6; // Reserved [75:70]
- UINT32 DsrImp:1; // DSR implemented [76:76]
- UINT32 ReadBlkMisalign:1; // Read block misalignment [77:77]
- UINT32 WriteBlkMisalign:1; // Write block misalignment [78:78]
- UINT32 ReadBlPartial:1; // Partial blocks for read allowed [79:79]
- UINT32 ReadBlLen:4; // Max. read data block length [83:80]
- UINT32 Ccc:12; // Card command classes [95:84]
-
- UINT32 TranSpeed:8; // Max. data transfer rate [103:96]
- UINT32 Nsac:8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
- UINT32 Taac:8; // Data read access-time [119:112]
- UINT32 Reserved5:6; // Reserved [125:120]
- UINT32 CsdStructure:2; // CSD structure [127:126]
+ UINT32 NotUsed : 1; // Not used [0:0]
+ UINT32 Crc : 7; // CRC [7:1]
+ UINT32 Reserved : 2; // Reserved [9:8]
+ UINT32 FileFormat : 2; // File format [11:10]
+ UINT32 TmpWriteProtect : 1; // Temporary write protection [12:12]
+ UINT32 PermWriteProtect : 1; // Permanent write protection [13:13]
+ UINT32 Copy : 1; // Copy flag (OTP) [14:14]
+ UINT32 FileFormatGrp : 1; // File format group [15:15]
+ UINT32 Reserved1 : 5; // Reserved [20:16]
+ UINT32 WriteBlPartial : 1; // Partial blocks for write allowed [21:21]
+ UINT32 WriteBlLen : 4; // Max. write data block length [25:22]
+ UINT32 R2WFactor : 3; // Write speed factor [28:26]
+ UINT32 Reserved2 : 2; // Manufacturer default ECC [30:29]
+ UINT32 WpGrpEnable : 1; // Write protect group enable [31:31]
+
+ UINT32 WpGrpSize : 7; // Write protect group size [38:32]
+ UINT32 SectorSize : 7; // Erase sector size [45:39]
+ UINT32 EraseBlkEn : 1; // Erase single block enable [46:46]
+ UINT32 Reserved3 : 1; // Reserved [47:47]
+ UINT32 CSizeLow : 16; // Device size low 16 bits [63:48]
+
+ UINT32 CSizeHigh : 6; // Device size high 6 bits [69:64]
+ UINT32 Reserved4 : 6; // Reserved [75:70]
+ UINT32 DsrImp : 1; // DSR implemented [76:76]
+ UINT32 ReadBlkMisalign : 1; // Read block misalignment [77:77]
+ UINT32 WriteBlkMisalign : 1; // Write block misalignment [78:78]
+ UINT32 ReadBlPartial : 1; // Partial blocks for read allowed [79:79]
+ UINT32 ReadBlLen : 4; // Max. read data block length [83:80]
+ UINT32 Ccc : 12; // Card command classes [95:84]
+
+ UINT32 TranSpeed : 8; // Max. data transfer rate [103:96]
+ UINT32 Nsac : 8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
+ UINT32 Taac : 8; // Data read access-time [119:112]
+ UINT32 Reserved5 : 6; // Reserved [125:120]
+ UINT32 CsdStructure : 2; // CSD structure [127:126]
} SD_CSD2;
typedef struct {
- UINT32 Reserved; // Reserved [31:0]
-
- UINT32 CmdSupport:4; // Command Support bits [35:32]
- UINT32 Reserved1:6; // Reserved [41:36]
- UINT32 SdSpec4:1; // Spec. Version 4.00 or higher [42:42]
- UINT32 ExSecurity:4; // Extended Security Support [46:43]
- UINT32 SdSpec3:1; // Spec. Version 3.00 or higher [47:47]
- UINT32 SdBusWidths:4; // DAT Bus widths supported [51:48]
- UINT32 SdSecurity:3; // CPRM security support [54:52]
- UINT32 DataStatAfterErase:1; // Data status after erases [55]
- UINT32 SdSpec:4; // SD Memory Card Spec. Version [59:56]
- UINT32 ScrStructure:4; // SCR Structure [63:60]
+ UINT32 Reserved; // Reserved [31:0]
+
+ UINT32 CmdSupport : 4; // Command Support bits [35:32]
+ UINT32 Reserved1 : 6; // Reserved [41:36]
+ UINT32 SdSpec4 : 1; // Spec. Version 4.00 or higher [42:42]
+ UINT32 ExSecurity : 4; // Extended Security Support [46:43]
+ UINT32 SdSpec3 : 1; // Spec. Version 3.00 or higher [47:47]
+ UINT32 SdBusWidths : 4; // DAT Bus widths supported [51:48]
+ UINT32 SdSecurity : 3; // CPRM security support [54:52]
+ UINT32 DataStatAfterErase : 1; // Data status after erases [55]
+ UINT32 SdSpec : 4; // SD Memory Card Spec. Version [59:56]
+ UINT32 ScrStructure : 4; // SCR Structure [63:60]
} SD_SCR;
#pragma pack()
|