diff options
Diffstat (limited to 'MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c')
| -rw-r--r-- | MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c | 1249 |
1 files changed, 1249 insertions, 0 deletions
diff --git a/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c b/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c new file mode 100644 index 0000000000..0cae84bd58 --- /dev/null +++ b/MdePkg/Library/BaseS3PciSegmentLib/S3PciSegmentLib.c @@ -0,0 +1,1249 @@ +/** @file
+ The multiple segments PCI configuration Library Services that carry out
+ PCI configuration and enable the PCI operations to be replayed during an
+ S3 resume. This library class maps directly on top of the PciSegmentLib class.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include <Base.h>
+
+#include <Library/DebugLib.h>
+#include <Library/S3BootScriptLib.h>
+#include <Library/PciSegmentLib.h>
+
+/**
+ Macro that converts address in PciSegmentLib format to the new address that can be pass
+ to the S3 Boot Script Library functions. The Segment is dropped.
+
+ @param Address Address in PciSegmentLib format.
+
+ @retval New address that can be pass to the S3 Boot Script Library functions.
+**/
+#define PCI_SEGMENT_LIB_ADDRESS_TO_S3_BOOT_SCRIPT_PCI_ADDRESS(Address) \
+ ((((UINT32)(Address) >> 20) & 0xff) << 24) | \
+ ((((UINT32)(Address) >> 15) & 0x1f) << 16) | \
+ ((((UINT32)(Address) >> 12) & 0x07) << 8) | \
+ LShiftU64 ((Address) & 0xfff, 32) // Always put Register in high four bytes.
+
+/**
+ Saves a PCI configuration value to the boot script.
+
+ This internal worker function saves a PCI configuration value in
+ the S3 script to be replayed on S3 resume.
+
+ If the saving process fails, then ASSERT().
+
+ @param Width The width of PCI configuration.
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Buffer The buffer containing value.
+
+**/
+VOID
+InternalSavePciSegmentWriteValueToBootScript (
+ IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
+ IN UINT64 Address,
+ IN VOID *Buffer
+ )
+{
+ RETURN_STATUS Status;
+
+ Status = S3BootScriptSavePciCfg2Write (
+ Width,
+ RShiftU64 ((Address), 32) & 0xffff,
+ PCI_SEGMENT_LIB_ADDRESS_TO_S3_BOOT_SCRIPT_PCI_ADDRESS (Address),
+ 1,
+ Buffer
+ );
+ ASSERT_RETURN_ERROR (Status);
+}
+
+/**
+ Saves an 8-bit PCI configuration value to the boot script.
+
+ This internal worker function saves an 8-bit PCI configuration value in
+ the S3 script to be replayed on S3 resume.
+
+ If the saving process fails, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value saved to boot script.
+
+ @return Value.
+
+**/
+UINT8
+InternalSavePciSegmentWrite8ValueToBootScript (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ InternalSavePciSegmentWriteValueToBootScript (S3BootScriptWidthUint8, Address, &Value);
+
+ return Value;
+}
+
+/**
+ Reads an 8-bit PCI configuration register, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 8-bit PCI configuration register specified by Address.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentRead8 (
+ IN UINT64 Address
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentRead8 (Address));
+}
+
+/**
+ Writes an 8-bit PCI configuration register, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Writes the 8-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentWrite8 (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentWrite8 (Address, Value));
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value, and saves
+ the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentOr8 (
+ IN UINT64 Address,
+ IN UINT8 OrData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentOr8 (Address, OrData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentAnd8 (
+ IN UINT64 Address,
+ IN UINT8 AndData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentAnd8 (Address, AndData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value,
+ followed a bitwise OR with another 8-bit value, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentAndThenOr8 (
+ IN UINT64 Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentAndThenOr8 (Address, AndData, OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentBitFieldRead8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentBitFieldRead8 (Address, StartBit, EndBit));
+}
+
+/**
+ Writes a bit field to a PCI configuration register, and saves the value in
+ the S3 script to be replayed on S3 resume.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentBitFieldWrite8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentBitFieldWrite8 (Address, StartBit, EndBit, Value));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, writes
+ the result back to the bit field in the 8-bit port, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentBitFieldOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentBitFieldOr8 (Address, StartBit, EndBit, OrData));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, writes the result back to the bit field in the 8-bit register, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentBitFieldAnd8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentBitFieldAnd8 (Address, StartBit, EndBit, AndData));
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, writes the result back to the bit field in the 8-bit port,
+ and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+S3PciSegmentBitFieldAndThenOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return InternalSavePciSegmentWrite8ValueToBootScript (Address, PciSegmentBitFieldAndThenOr8 (Address, StartBit, EndBit, AndData, OrData));
+}
+
+/**
+ Saves a 16-bit PCI configuration value to the boot script.
+
+ This internal worker function saves a 16-bit PCI configuration value in
+ the S3 script to be replayed on S3 resume.
+
+ If the saving process fails, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value saved to boot script.
+
+ @return Value.
+
+**/
+UINT16
+InternalSavePciSegmentWrite16ValueToBootScript (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ InternalSavePciSegmentWriteValueToBootScript (S3BootScriptWidthUint16, Address, &Value);
+
+ return Value;
+}
+
+/**
+ Reads a 16-bit PCI configuration register, and saves the value in the S3 script
+ to be replayed on S3 resume.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentRead16 (
+ IN UINT64 Address
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentRead16 (Address));
+}
+
+/**
+ Writes a 16-bit PCI configuration register, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Writes the 16-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentWrite16 (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentWrite16 (Address, Value));
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with a 16-bit
+ value, and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by OrData, and
+ writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned. This function
+ must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentOr16 (
+ IN UINT64 Address,
+ IN UINT16 OrData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentOr16 (Address, OrData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentAnd16 (
+ IN UINT64 Address,
+ IN UINT16 AndData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentAnd16 (Address, AndData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value,
+ followed a bitwise OR with another 16-bit value, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentAndThenOr16 (
+ IN UINT64 Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentAndThenOr16 (Address, AndData, OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentBitFieldRead16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentBitFieldRead16 (Address, StartBit, EndBit));
+}
+
+/**
+ Writes a bit field to a PCI configuration register, and saves the value in
+ the S3 script to be replayed on S3 resume.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentBitFieldWrite16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentBitFieldWrite16 (Address, StartBit, EndBit, Value));
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, writes
+ the result back to the bit field in the 16-bit port, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentBitFieldOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentBitFieldOr16 (Address, StartBit, EndBit, OrData));
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
+ AND, writes the result back to the bit field in the 16-bit register, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentBitFieldAnd16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentBitFieldAnd16 (Address, StartBit, EndBit, AndData));
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, writes the result back to the bit field in the 16-bit port,
+ and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+S3PciSegmentBitFieldAndThenOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return InternalSavePciSegmentWrite16ValueToBootScript (Address, PciSegmentBitFieldAndThenOr16 (Address, StartBit, EndBit, AndData, OrData));
+}
+
+
+
+/**
+ Saves a 32-bit PCI configuration value to the boot script.
+
+ This internal worker function saves a 32-bit PCI configuration value in the S3 script
+ to be replayed on S3 resume.
+
+ If the saving process fails, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value saved to boot script.
+
+ @return Value.
+
+**/
+UINT32
+InternalSavePciSegmentWrite32ValueToBootScript (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ InternalSavePciSegmentWriteValueToBootScript (S3BootScriptWidthUint32, Address, &Value);
+
+ return Value;
+}
+
+/**
+ Reads a 32-bit PCI configuration register, and saves the value in the S3 script
+ to be replayed on S3 resume.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentRead32 (
+ IN UINT64 Address
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentRead32 (Address));
+}
+
+/**
+ Writes a 32-bit PCI configuration register, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Writes the 32-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentWrite32 (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentWrite32 (Address, Value));
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit
+ value, and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by OrData, and
+ writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned. This function
+ must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentOr32 (
+ IN UINT64 Address,
+ IN UINT32 OrData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentOr32 (Address, OrData));
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentAnd32 (
+ IN UINT64 Address,
+ IN UINT32 AndData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentAnd32 (Address, AndData));
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value,
+ followed a bitwise OR with another 32-bit value, and saves the value in the S3 script to
+ be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentAndThenOr32 (
+ IN UINT64 Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentAndThenOr32 (Address, AndData, OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentBitFieldRead32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentBitFieldRead32 (Address, StartBit, EndBit));
+}
+
+/**
+ Writes a bit field to a PCI configuration register, and saves the value in
+ the S3 script to be replayed on S3 resume.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentBitFieldWrite32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentBitFieldWrite32 (Address, StartBit, EndBit, Value));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, writes
+ the result back to the bit field in the 32-bit port, and saves the value in the
+ S3 script to be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentBitFieldOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentBitFieldOr32 (Address, StartBit, EndBit, OrData));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register, and
+ saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 32-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentBitFieldAnd32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentBitFieldAnd32 (Address, StartBit, EndBit, AndData));
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, writes the result back to the bit field in the 32-bit port,
+ and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+S3PciSegmentBitFieldAndThenOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return InternalSavePciSegmentWrite32ValueToBootScript (Address, PciSegmentBitFieldAndThenOr32 (Address, StartBit, EndBit, AndData, OrData));
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer,
+ and saves the value in the S3 script to be replayed on S3 resume.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+S3PciSegmentReadBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ RETURN_STATUS Status;
+
+ Status = S3BootScriptSavePciCfg2Write (
+ S3BootScriptWidthUint8,
+ RShiftU64 (StartAddress, 32) & 0xffff,
+ PCI_SEGMENT_LIB_ADDRESS_TO_S3_BOOT_SCRIPT_PCI_ADDRESS (StartAddress),
+ PciSegmentReadBuffer (StartAddress, Size, Buffer),
+ Buffer
+ );
+ ASSERT_RETURN_ERROR (Status);
+ return Size;
+}
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space, and saves the value in the S3 script to be replayed on S3
+ resume.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer containing the data to write.
+
+ @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+S3PciSegmentWriteBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ RETURN_STATUS Status;
+
+ Status = S3BootScriptSavePciCfg2Write (
+ S3BootScriptWidthUint8,
+ RShiftU64 (StartAddress, 32) & 0xffff,
+ PCI_SEGMENT_LIB_ADDRESS_TO_S3_BOOT_SCRIPT_PCI_ADDRESS (StartAddress),
+ PciSegmentWriteBuffer (StartAddress, Size, Buffer),
+ Buffer
+ );
+ ASSERT_RETURN_ERROR (Status);
+ return Size;
+}
|