diff options
Diffstat (limited to 'NetworkPkg/DnsDxe/DnsDriver.h')
| -rw-r--r-- | NetworkPkg/DnsDxe/DnsDriver.h | 606 |
1 files changed, 606 insertions, 0 deletions
diff --git a/NetworkPkg/DnsDxe/DnsDriver.h b/NetworkPkg/DnsDxe/DnsDriver.h new file mode 100644 index 0000000000..f6b8a7e8fc --- /dev/null +++ b/NetworkPkg/DnsDxe/DnsDriver.h @@ -0,0 +1,606 @@ +/** @file
+The header files of the driver binding and service binding protocol for DnsDxe driver.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DNS_DRIVER_H_
+#define _DNS_DRIVER_H_
+
+#include <Protocol/DriverBinding.h>
+#include <Protocol/ServiceBinding.h>
+
+///
+/// Dns service block
+///
+typedef struct _DNS_DRIVER_DATA DNS_DRIVER_DATA;
+
+///
+/// Dns service block
+///
+typedef struct _DNS_SERVICE DNS_SERVICE;
+
+///
+/// Dns instance block
+///
+typedef struct _DNS_INSTANCE DNS_INSTANCE;
+
+#define DNS_SERVICE_SIGNATURE SIGNATURE_32 ('D', 'N', 'S', 'S')
+
+#define DNS_INSTANCE_SIGNATURE SIGNATURE_32 ('D', 'N', 'S', 'I')
+
+struct _DNS_DRIVER_DATA {
+ EFI_EVENT Timer; /// Ticking timer for DNS cache update.
+
+ LIST_ENTRY Dns4CacheList;
+ LIST_ENTRY Dns4ServerList;
+
+ LIST_ENTRY Dns6CacheList;
+ LIST_ENTRY Dns6ServerList;
+};
+
+struct _DNS_SERVICE {
+ UINT32 Signature;
+ EFI_SERVICE_BINDING_PROTOCOL ServiceBinding;
+
+ UINT16 Dns4ChildrenNum;
+ LIST_ENTRY Dns4ChildrenList;
+
+ UINT16 Dns6ChildrenNum;
+ LIST_ENTRY Dns6ChildrenList;
+
+ EFI_HANDLE ControllerHandle;
+ EFI_HANDLE ImageHandle;
+
+ EFI_EVENT TimerToGetMap;
+
+ EFI_EVENT Timer; /// Ticking timer for packet retransmission.
+
+ UINT8 IpVersion;
+ UDP_IO *ConnectUdp;
+};
+
+struct _DNS_INSTANCE {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ EFI_DNS4_PROTOCOL Dns4;
+ EFI_DNS6_PROTOCOL Dns6;
+
+ INTN State;
+ BOOLEAN InDestroy;
+
+ DNS_SERVICE *Service;
+ EFI_HANDLE ChildHandle;
+
+ EFI_DNS4_CONFIG_DATA Dns4CfgData;
+ EFI_DNS6_CONFIG_DATA Dns6CfgData;
+
+ EFI_IP_ADDRESS SessionDnsServer;
+
+ NET_MAP Dns4TxTokens;
+ NET_MAP Dns6TxTokens;
+
+ UINT32 MaxRetry;
+
+ UDP_IO *UdpIo;
+};
+
+typedef struct {
+ EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;
+ UINTN NumberOfChildren;
+ EFI_HANDLE *ChildHandleBuffer;
+} DNS_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT;
+
+extern DNS_DRIVER_DATA *mDriverData;
+
+#define DNS_SERVICE_FROM_THIS(a) \
+ CR (a, DNS_SERVICE, ServiceBinding, DNS_SERVICE_SIGNATURE)
+
+#define DNS_INSTANCE_FROM_THIS_PROTOCOL4(a) \
+ CR (a, DNS_INSTANCE, Dns4, DNS_INSTANCE_SIGNATURE)
+
+#define DNS_INSTANCE_FROM_THIS_PROTOCOL6(a) \
+ CR (a, DNS_INSTANCE, Dns6, DNS_INSTANCE_SIGNATURE)
+
+
+/**
+ Destroy the DNS instance and recycle the resources.
+
+ @param[in] Instance The pointer to the DNS instance.
+
+**/
+VOID
+DnsDestroyInstance (
+ IN DNS_INSTANCE *Instance
+ );
+
+/**
+ Create the DNS instance and initialize it.
+
+ @param[in] Service The pointer to the DNS service.
+ @param[out] Instance The pointer to the DNS instance.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resources.
+ @retval EFI_SUCCESS The DNS instance is created.
+
+**/
+EFI_STATUS
+DnsCreateInstance (
+ IN DNS_SERVICE *Service,
+ OUT DNS_INSTANCE **Instance
+ );
+
+/**
+ Callback function which provided by user to remove one node in NetDestroyLinkList process.
+
+ @param[in] Entry The entry to be removed.
+ @param[in] Context Pointer to the callback context corresponds to the Context in NetDestroyLinkList.
+
+ @retval EFI_SUCCESS The entry has been removed successfully.
+ @retval Others Fail to remove the entry.
+
+**/
+EFI_STATUS
+EFIAPI
+DnsDestroyChildEntryInHandleBuffer (
+ IN LIST_ENTRY *Entry,
+ IN VOID *Context
+ );
+
+/**
+ Config a NULL UDP that is used to keep the connection between UDP and DNS.
+
+ Just leave the Udp child unconfigured. When UDP is unloaded,
+ DNS will be informed with DriverBinding Stop.
+
+ @param UdpIo The UDP_IO to configure
+ @param Context The opaque parameter to the callback
+
+ @retval EFI_SUCCESS It always return EFI_SUCCESS directly.
+
+**/
+EFI_STATUS
+EFIAPI
+DnsConfigNullUdp (
+ IN UDP_IO *UdpIo,
+ IN VOID *Context
+ );
+
+/**
+ Release all the resource used the DNS service binding instance.
+
+ @param DnsSb The Dns service binding instance.
+
+**/
+VOID
+DnsDestroyService (
+ IN DNS_SERVICE *DnsSb
+ );
+
+/**
+ Create then initialize a Dns service binding instance.
+
+ @param Controller The controller to install the DNS service
+ binding on
+ @param Image The driver binding image of the DNS driver
+ @param IpVersion IpVersion for this service
+ @param Service The variable to receive the created service
+ binding instance.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resource to create the instance.
+ @retval EFI_DEVICE_ERROR Failed to create a NULL UDP port to keep
+ connection with UDP.
+ @retval EFI_SUCCESS The service instance is created for the
+ controller.
+
+**/
+EFI_STATUS
+DnsCreateService (
+ IN EFI_HANDLE Controller,
+ IN EFI_HANDLE Image,
+ IN UINT8 IpVersion,
+ OUT DNS_SERVICE **Service
+ );
+
+/**
+ Unloads an image.
+
+ @param ImageHandle Handle that identifies the image to be unloaded.
+
+ @retval EFI_SUCCESS The image has been unloaded.
+ @retval EFI_INVALID_PARAMETER ImageHandle is not a valid image handle.
+
+**/
+EFI_STATUS
+EFIAPI
+DnsUnload (
+ IN EFI_HANDLE ImageHandle
+ );
+
+/**
+ This is the declaration of an EFI image entry point. This entry point is
+ the same for UEFI Applications, UEFI OS Loaders, and UEFI Drivers including
+ both device drivers and bus drivers.
+
+ @param ImageHandle The firmware allocated handle for the UEFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval Others An unexpected error occurred.
+**/
+EFI_STATUS
+EFIAPI
+DnsDriverEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ );
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+Dns4DriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
+ );
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+Dns4DriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
+ );
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+Dns4DriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer OPTIONAL
+ );
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+Dns6DriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
+ );
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+Dns6DriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
+ );
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+Dns6DriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer OPTIONAL
+ );
+
+/**
+ Creates a child handle and installs a protocol.
+
+ The CreateChild() function installs a protocol on ChildHandle.
+ If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
+ If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.
+
+ @param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
+ @param[in] ChildHandle Pointer to the handle of the child to create. If it is NULL,
+ then a new handle is created. If it is a pointer to an existing UEFI handle,
+ then the protocol is added to the existing UEFI handle.
+
+ @retval EFI_SUCCES The protocol was added to ChildHandle.
+ @retval EFI_INVALID_PARAMETER ChildHandle is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
+ the child
+ @retval other The child handle was not created
+
+**/
+EFI_STATUS
+EFIAPI
+Dns4ServiceBindingCreateChild (
+ IN EFI_SERVICE_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE *ChildHandle
+ );
+
+/**
+ Destroys a child handle with a protocol installed on it.
+
+ The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
+ that was installed by CreateChild() from ChildHandle. If the removed protocol is the
+ last protocol on ChildHandle, then ChildHandle is destroyed.
+
+ @param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
+ @param[in] ChildHandle Handle of the child to destroy
+
+ @retval EFI_SUCCES The protocol was removed from ChildHandle.
+ @retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.
+ @retval EFI_INVALID_PARAMETER Child handle is NULL.
+ @retval EFI_ACCESS_DENIED The protocol could not be removed from the ChildHandle
+ because its services are being used.
+ @retval other The child handle was not destroyed
+
+**/
+EFI_STATUS
+EFIAPI
+Dns4ServiceBindingDestroyChild (
+ IN EFI_SERVICE_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ChildHandle
+ );
+
+/**
+ Creates a child handle and installs a protocol.
+
+ The CreateChild() function installs a protocol on ChildHandle.
+ If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
+ If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.
+
+ @param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
+ @param[in] ChildHandle Pointer to the handle of the child to create. If it is NULL,
+ then a new handle is created. If it is a pointer to an existing UEFI handle,
+ then the protocol is added to the existing UEFI handle.
+
+ @retval EFI_SUCCES The protocol was added to ChildHandle.
+ @retval EFI_INVALID_PARAMETER ChildHandle is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
+ the child
+ @retval other The child handle was not created
+
+**/
+EFI_STATUS
+EFIAPI
+Dns6ServiceBindingCreateChild (
+ IN EFI_SERVICE_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE *ChildHandle
+ );
+
+/**
+ Destroys a child handle with a protocol installed on it.
+
+ The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
+ that was installed by CreateChild() from ChildHandle. If the removed protocol is the
+ last protocol on ChildHandle, then ChildHandle is destroyed.
+
+ @param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
+ @param[in] ChildHandle Handle of the child to destroy
+
+ @retval EFI_SUCCES The protocol was removed from ChildHandle.
+ @retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.
+ @retval EFI_INVALID_PARAMETER Child handle is NULL.
+ @retval EFI_ACCESS_DENIED The protocol could not be removed from the ChildHandle
+ because its services are being used.
+ @retval other The child handle was not destroyed
+
+**/
+EFI_STATUS
+EFIAPI
+Dns6ServiceBindingDestroyChild (
+ IN EFI_SERVICE_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE ChildHandle
+ );
+
+
+#endif
|