diff options
Diffstat (limited to 'OldMdePkg/Include/Protocol/Tcp4.h')
| -rw-r--r-- | OldMdePkg/Include/Protocol/Tcp4.h | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/OldMdePkg/Include/Protocol/Tcp4.h b/OldMdePkg/Include/Protocol/Tcp4.h new file mode 100644 index 0000000000..8c22ef2096 --- /dev/null +++ b/OldMdePkg/Include/Protocol/Tcp4.h @@ -0,0 +1,508 @@ +/** @file
+ EFI TCPv4 Protocol Definition
+ The EFI TCPv4 Service Binding Protocol is used to locate EFI TCPv4 Protocol drivers to create
+ and destroy child of the driver to communicate with other host using TCP protocol.
+ The EFI TCPv4 Protocol provides services to send and receive data stream.
+
+ Copyright (c) 2006, Intel Corporation
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ Module Name: Tcp4.h
+
+**/
+
+#ifndef __EFI_TCP4_PROTOCOL_H__
+#define __EFI_TCP4_PROTOCOL_H__
+
+#define EFI_TCP4_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0x00720665, 0x67EB, 0x4a99, {0xBA, 0xF7, 0xD3, 0xC3, 0x3A, 0x1C, 0x7C, 0xC9 } \
+ }
+
+#define EFI_TCP4_PROTOCOL_GUID \
+ { \
+ 0x65530BC7, 0xA359, 0x410f, {0xB0, 0x10, 0x5A, 0xAD, 0xC7, 0xEC, 0x2B, 0x62 } \
+ }
+
+typedef struct _EFI_TCP4_PROTOCOL EFI_TCP4_PROTOCOL;
+
+typedef struct {
+ EFI_HANDLE InstanceHandle;
+ EFI_IPv4_ADDRESS LocalAddress;
+ UINT16 LocalPort;
+ EFI_IPv4_ADDRESS RemoteAddress;
+ UINT16 RemotePort;
+} EFI_TCP4_SERVICE_POINT;
+
+typedef struct {
+ EFI_HANDLE DriverHandle;
+ UINT32 ServiceCount;
+ EFI_TCP4_SERVICE_POINT Services[1];
+} EFI_TCP4_VARIABLE_DATA;
+
+typedef struct {
+ BOOLEAN UseDefaultAddress;
+ EFI_IPv4_ADDRESS StationAddress;
+ EFI_IPv4_ADDRESS SubnetMask;
+ UINT16 StationPort;
+ EFI_IPv4_ADDRESS RemoteAddress;
+ UINT16 RemotePort;
+ BOOLEAN ActiveFlag;
+} EFI_TCP4_ACCESS_POINT;
+
+typedef struct {
+ UINTN ReceiveBufferSize;
+ UINTN SendBufferSize;
+ UINTN MaxSynBackLog;
+ UINTN ConnectionTimeout;
+ UINTN DataRetries;
+ UINTN FinTimeout;
+ UINTN TimeWaitTimeout;
+ UINTN KeepAliveProbes;
+ UINTN KeepAliveTime;
+ UINTN KeepAliveInterval;
+ BOOLEAN EnableNagle;
+ BOOLEAN EnableTimeStamp;
+ BOOLEAN EnableWindowScaling;
+ BOOLEAN EnableSelectiveAck;
+ BOOLEAN EnablePathMtuDiscovery;
+} EFI_TCP4_OPTION;
+
+typedef struct {
+ //
+ // I/O parameters
+ //
+ UINT8 TypeOfService;
+ UINT8 TimeToLive;
+
+ //
+ // Access Point
+ //
+ EFI_TCP4_ACCESS_POINT AccessPoint;
+
+ //
+ // TCP Control Options
+ //
+ EFI_TCP4_OPTION *ControlOption;
+} EFI_TCP4_CONFIG_DATA;
+
+typedef enum {
+ Tcp4StateClosed = 0,
+ Tcp4StateListen = 1,
+ Tcp4StateSynSent = 2,
+ Tcp4StateSynReceived = 3,
+ Tcp4StateEstablished = 4,
+ Tcp4StateFinWait1 = 5,
+ Tcp4StateFinWait2 = 6,
+ Tcp4StateClosing = 7,
+ Tcp4StateTimeWait = 8,
+ Tcp4StateCloseWait = 9,
+ Tcp4StateLastAck = 10
+} EFI_TCP4_CONNECTION_STATE;
+
+typedef struct {
+ EFI_EVENT Event;
+ EFI_STATUS Status;
+} EFI_TCP4_COMPLETION_TOKEN;
+
+typedef struct {
+ EFI_TCP4_COMPLETION_TOKEN CompletionToken;
+} EFI_TCP4_CONNECTION_TOKEN;
+
+typedef struct {
+ EFI_TCP4_COMPLETION_TOKEN CompletionToken;
+ EFI_HANDLE NewChildHandle;
+} EFI_TCP4_LISTEN_TOKEN;
+
+typedef struct {
+ UINTN FragmentLength;
+ VOID *FragmentBuffer;
+} EFI_TCP4_FRAGMENT_DATA;
+
+typedef struct {
+ BOOLEAN UrgentFlag;
+ IN OUT UINTN DataLength;
+ UINTN FragmentCount;
+ EFI_TCP4_FRAGMENT_DATA FragmentTable[1];
+} EFI_TCP4_RECEIVE_DATA;
+
+typedef struct {
+ BOOLEAN Push;
+ BOOLEAN Urgent;
+ UINTN DataLength;
+ UINTN FragmentCount;
+ EFI_TCP4_FRAGMENT_DATA FragmentTable[1];
+} EFI_TCP4_TRANSMIT_DATA;
+
+typedef struct {
+ EFI_TCP4_COMPLETION_TOKEN CompletionToken;
+ union {
+ EFI_TCP4_RECEIVE_DATA *RxData;
+ EFI_TCP4_TRANSMIT_DATA *TxData;
+ } Packet;
+} EFI_TCP4_IO_TOKEN;
+
+typedef struct {
+ EFI_TCP4_COMPLETION_TOKEN CompletionToken;
+ BOOLEAN AbortOnClose;
+} EFI_TCP4_CLOSE_TOKEN;
+
+//
+// Interface definition for TCP4 protocol
+//
+
+/**
+ Get the current operational status.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param Tcp4State Pointer to the buffer to receive the current TCP state.
+ @param Tcp4ConfigData Pointer to the buffer to receive the current TCP configuration.
+ @param Ip4ModeData Pointer to the buffer to receive the current IPv4 configuration
+ data used by the TCPv4 instance.
+ @param MnpConfigData Pointer to the buffer to receive the current MNP configuration
+ data used indirectly by the TCPv4 instance.
+ @param SnpModeData Pointer to the buffer to receive the current SNP configuration
+ data used indirectly by the TCPv4 instance.
+
+ @retval EFI_SUCCESS The mode data was read.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NOT_STARTED No configuration data is available because this instance hasn't
+ been started.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_GET_MODE_DATA) (
+ IN EFI_TCP4_PROTOCOL *This,
+ OUT EFI_TCP4_CONNECTION_STATE *Tcp4State OPTIONAL,
+ OUT EFI_TCP4_CONFIG_DATA *Tcp4ConfigData OPTIONAL,
+ OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL,
+ OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL,
+ OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL
+ )
+;
+
+/**
+ Initialize or brutally reset the operational parameters for this EFI TCPv4 instance.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param Tcp4ConfigData Pointer to the configure data to configure the instance.
+
+ @retval EFI_SUCCESS The operational settings are set, changed, or reset
+ successfully.
+ @retval EFI_INVALID_PARAMETER Some parameter is invalid.
+ @retval EFI_NO_MAPPING When using a default address, configuration (through
+ DHCP, BOOTP, RARP, etc.) is not finished yet.
+ @retval EFI_ACCESS_DENIED Configuring TCP instance when it is configured without
+ calling Configure() with NULL to reset it.
+ @retval EFI_DEVICE_ERROR An unexpected network or system error occurred.
+ @retval EFI_UNSUPPORTED One or more of the control options are not supported in
+ the implementation.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when
+ executing Configure().
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_CONFIGURE) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_CONFIG_DATA *TcpConfigData OPTIONAL
+ )
+;
+
+
+/**
+ Add or delete a route entry to the route table
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param DeleteRoute Set it to TRUE to delete this route from the routing table. Set it to
+ FALSE to add this route to the routing table.
+ DestinationAddress and SubnetMask are used as the
+ keywords to search route entry.
+ @param SubnetAddress The destination network.
+ @param SubnetMask The subnet mask of the destination network.
+ @param GatewayAddress The gateway address for this route. It must be on the same
+ subnet with the station address unless a direct route is specified.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_NOT_STARTED The EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
+ RARP, etc.) is not finished yet.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ - This is NULL.
+ - SubnetAddress is NULL.
+ - SubnetMask is NULL.
+ - GatewayAddress is NULL.
+ - *SubnetAddress is not NULL a valid subnet address.
+ - *SubnetMask is not a valid subnet mask.
+ - *GatewayAddress is not a valid unicast IP address or it
+ is not in the same subnet.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough resources to add the entry to the
+ routing table.
+ @retval EFI_NOT_FOUND This route is not in the routing table.
+ @retval EFI_ACCESS_DENIED The route is already defined in the routing table.
+ @retval EFI_UNSUPPORTED The TCP driver does not support this operation.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_ROUTES) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN BOOLEAN DeleteRoute,
+ IN EFI_IPv4_ADDRESS *SubnetAddress,
+ IN EFI_IPv4_ADDRESS *SubnetMask,
+ IN EFI_IPv4_ADDRESS *GatewayAddress
+ )
+;
+
+/**
+ Initiate a nonblocking TCP connection request for an active TCP instance.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param ConnectionToken Pointer to the connection token to return when the TCP three
+ way handshake finishes.
+
+ @retval EFI_SUCCESS The connection request is successfully initiated and the state
+ - of this TCPv4 instance has been changed to
+ - Tcp4StateSynSent.
+ @retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_ACCESS_DENIED One or more of the following conditions are TRUE:
+ - This instance is not configured as an active one.
+ - This instance is not in Tcp4StateClosed state.
+ @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
+ - This is NULL.
+ - ConnectionToken is NULL.
+ - ConnectionToken->CompletionToken.Event is NULL.
+ @retval EFI_OUT_OF_RESOURCES The driver can't allocate enough resource to initiate the activeopen.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_CONNECT) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_CONNECTION_TOKEN *ConnectionToken
+ )
+;
+
+
+/**
+ Listen on the passive instance to accept an incoming connection request. This is a nonblocking operation.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param ListenToken Pointer to the listen token to return when operation finishes.
+
+ @retval EFI_SUCCESS The listen token has been queued successfully.
+ @retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_ACCESS_DENIED One or more of the following are TRUE:
+ - This instance is not a passive instance.
+ - This instance is not in Tcp4StateListen state.
+ - The same listen token has already existed in the listen
+ token queue of this TCP instance.
+ @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
+ - This is NULL.
+ - ListenToken is NULL.
+ - ListentToken->CompletionToken.Event is NULL.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
+ @retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_ACCEPT) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_LISTEN_TOKEN *ListenToken
+ )
+;
+
+/**
+ Queues outgoing data into the transmit queue.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param Token Pointer to the completion token to queue to the transmit queue.
+
+ @retval EFI_SUCCESS The data has been queued for transmission.
+ @retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
+ RARP, etc.) is not finished yet.
+ @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
+ - This is NULL.
+ - Token is NULL.
+ - Token->CompletionToken.Event is NULL.
+ - Token->Packet.TxData is NULL L.
+ - Token->Packet.FragmentCount is zero.
+ - Token->Packet.DataLength is not equal to the sum of fragment lengths.
+ @retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE:
+ - A transmit completion token with the same Token->CompletionToken.Event
+ was already in the transmission queue.
+ - The current instance is in Tcp4StateClosed state.
+ - The current instance is a passive one and it is in
+ Tcp4StateListen state.
+ - User has called Close() to disconnect this connection.
+ @retval EFI_NOT_READY The completion token could not be queued because the
+ transmit queue is full.
+ @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data because of resource
+ shortage.
+ @retval EFI_NETWORK_UNREACHABLE There is no route to the destination network or address.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_TRANSMIT) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_IO_TOKEN *Token
+ )
+;
+
+
+/**
+ Places an asynchronous receive request into the receiving queue.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param Token Pointer to a token that is associated with the receive data
+ descriptor.
+
+ @retval EFI_SUCCESS The receive completion token was cached.
+ @retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP,
+ etc.) is not finished yet.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ - This is NULL.
+ - Token is NULL.
+ - Token->CompletionToken.Event is NULL.
+ - Token->Packet.RxData is NULL.
+ - Token->Packet.RxData->DataLength is 0.
+ - The Token->Packet.RxData->DataLength is not
+ the sum of all FragmentBuffer length in FragmentTable.
+ @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of
+ system resources (usually memory).
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE:
+ - A receive completion token with the same Token-
+ >CompletionToken.Event was already in the receive
+ queue.
+ - The current instance is in Tcp4StateClosed state.
+ - The current instance is a passive one and it is in
+ Tcp4StateListen state.
+ - User has called Close() to disconnect this connection.
+ @retval EFI_CONNECTION_FIN The communication peer has closed the connection and there is
+ no any buffered data in the receive buffer of this instance.
+ @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_RECEIVE) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_IO_TOKEN *Token
+ )
+;
+
+/**
+ Disconnecting a TCP connection gracefully or reset a TCP connection. This function is a
+ nonblocking operation.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param CloseToken Pointer to the close token to return when operation finishes.
+
+ @retval EFI_SUCCESS The Close() is called successfully.
+ @retval EFI_NOT_STARTED This EFI TCPv4 Protocol instance has not been configured.
+ @retval EFI_ACCESS_DENIED One or more of the following are TRUE:
+ - Configure() has been called with
+ TcpConfigData set to NULL and this function has
+ not returned.
+ - Previous Close() call on this instance has not
+ finished.
+ @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
+ - This is NULL.
+ - CloseToken is NULL.
+ - CloseToken->CompletionToken.Event is NULL.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
+ @retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_CLOSE) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_CLOSE_TOKEN *CloseToken
+ )
+;
+
+/**
+ Abort an asynchronous connection, listen, transmission or receive request.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+ @param Token Pointer to a token that has been issued by
+ EFI_TCP4_PROTOCOL.Connect(),
+ EFI_TCP4_PROTOCOL.Accept(),
+ EFI_TCP4_PROTOCOL.Transmit() or
+ EFI_TCP4_PROTOCOL.Receive(). If NULL, all pending
+ tokens issued by above four functions will be aborted. Type
+ EFI_TCP4_COMPLETION_TOKEN is defined in
+ EFI_TCP4_PROTOCOL.Connect().
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_NOT_READY No incoming or outgoing data is processed.
+ @retval EFI_TIMEOUT Data was dropped out of the transmission or receive queue.
+ Consider increasing the polling rate.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_CANCEL) (
+ IN EFI_TCP4_PROTOCOL *This,
+ IN EFI_TCP4_COMPLETION_TOKEN *Token OPTIONAL
+ )
+;
+
+
+/**
+ Poll to receive incoming data and transmit outgoing segments.
+
+ @param This Pointer to the EFI_TCP4_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_NOT_READY No incoming or outgoing data is processed.
+ @retval EFI_TIMEOUT Data was dropped out of the transmission or receive queue.
+ Consider increasing the polling rate.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TCP4_POLL) (
+ IN EFI_TCP4_PROTOCOL *This
+ )
+;
+
+struct _EFI_TCP4_PROTOCOL {
+ EFI_TCP4_GET_MODE_DATA GetModeData;
+ EFI_TCP4_CONFIGURE Configure;
+ EFI_TCP4_ROUTES Routes;
+ EFI_TCP4_CONNECT Connect;
+ EFI_TCP4_ACCEPT Accept;
+ EFI_TCP4_TRANSMIT Transmit;
+ EFI_TCP4_RECEIVE Receive;
+ EFI_TCP4_CLOSE Close;
+ EFI_TCP4_CANCEL Cancel;
+ EFI_TCP4_POLL Poll;
+};
+
+#define EFI_CONNECTION_FIN EFIERR (104)
+#define EFI_CONNECTION_RESET EFIERR (105)
+#define EFI_CONNECTION_REFUSED EFIERR (106)
+
+extern EFI_GUID gEfiTcp4ServiceBindingProtocolGuid;
+extern EFI_GUID gEfiTcp4ProtocolGuid;
+
+#endif
|