diff options
Diffstat (limited to 'OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/SimpleNetwork.c')
| -rw-r--r-- | OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/SimpleNetwork.c | 1503 |
1 files changed, 0 insertions, 1503 deletions
diff --git a/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/SimpleNetwork.c b/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/SimpleNetwork.c deleted file mode 100644 index 0105d04f5d..0000000000 --- a/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/SimpleNetwork.c +++ /dev/null @@ -1,1503 +0,0 @@ -/** @file
- Provides the Simple Network functions.
-
- Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "Ax88772.h"
-
-/**
- This function updates the filtering on the receiver.
-
- This support routine calls ::Ax88772MacAddressSet to update
- the MAC address. This routine then rebuilds the multicast
- hash by calling ::Ax88772MulticastClear and ::Ax88772MulticastSet.
- Finally this routine enables the receiver by calling
- ::Ax88772RxControl.
-
- @param [in] pSimpleNetwork Simple network mode pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-ReceiveFilterUpdate (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- NIC_DEVICE * pNicDevice;
- EFI_STATUS Status;
- UINT32 Index;
-
- DBG_ENTER ( );
-
- //
- // Set the MAC address
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- pMode = pSimpleNetwork->Mode;
- Status = Ax88772MacAddressSet ( pNicDevice,
- &pMode->CurrentAddress.Addr[0]);
- if ( !EFI_ERROR ( Status )) {
- //
- // Clear the multicast hash table
- //
- Ax88772MulticastClear ( pNicDevice );
-
- //
- // Load the multicast hash table
- //
- if ( 0 != ( pMode->ReceiveFilterSetting & EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST )) {
- for ( Index = 0;
- ( !EFI_ERROR ( Status )) && ( Index < pMode->MCastFilterCount );
- Index++ ) {
- //
- // Enable the next multicast address
- //
- Ax88772MulticastSet ( pNicDevice,
- &pMode->MCastFilter[ Index ].Addr[0]);
- }
- }
-
- //
- // Enable the receiver
- //
- if ( !EFI_ERROR ( Status )) {
- Status = Ax88772RxControl ( pNicDevice, pMode->ReceiveFilterSetting );
- }
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function updates the SNP driver status.
-
- This function gets the current interrupt and recycled transmit
- buffer status from the network interface. The interrupt status
- and the media status are returned as a bit mask in InterruptStatus.
- If InterruptStatus is NULL, the interrupt status will not be read.
- Upon successful return of the media status, the MediaPresent field
- of EFI_SIMPLE_NETWORK_MODE will be updated to reflect any change
- of media status. If TxBuf is not NULL, a recycled transmit buffer
- address will be retrived. If a recycled transmit buffer address
- is returned in TxBuf, then the buffer has been successfully
- transmitted, and the status for that buffer is cleared.
-
- This function calls ::Ax88772Rx to update the media status and
- queue any receive packets.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] pInterruptStatus A pointer to the bit mask of the current active interrupts.
- If this is NULL, the interrupt status will not be read from
- the device. If this is not NULL, the interrupt status will
- be read from teh device. When the interrupt status is read,
- it will also be cleared. Clearing the transmit interrupt
- does not empty the recycled transmit buffer array.
- @param [out] ppTxBuf Recycled transmit buffer address. The network interface will
- not transmit if its internal recycled transmit buffer array is
- full. Reading the transmit buffer does not clear the transmit
- interrupt. If this is NULL, then the transmit buffer status
- will not be read. If there are not transmit buffers to recycle
- and TxBuf is not NULL, *TxBuf will be set to NULL.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_GetStatus (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- OUT UINT32 * pInterruptStatus,
- OUT VOID ** ppTxBuf
- )
-{
- BOOLEAN bLinkIdle;
- EFI_SIMPLE_NETWORK_MODE * pMode;
- NIC_DEVICE * pNicDevice;
- EFI_STATUS Status;
- EFI_TPL TplPrevious;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // Return the transmit buffer
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- if (( NULL != ppTxBuf ) && ( NULL != pNicDevice->pTxBuffer )) {
- *ppTxBuf = pNicDevice->pTxBuffer;
- pNicDevice->pTxBuffer = NULL;
- }
-
- //
- // Determine if interface is running
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkStopped != pMode->State ) {
- //
- // Synchronize with Ax88772Timer
- //
- VERIFY_TPL ( TPL_AX88772 );
- TplPrevious = gBS->RaiseTPL ( TPL_AX88772 );
-
- //
- // Update the link status
- //
- bLinkIdle = pNicDevice->bLinkIdle;
- pNicDevice->bLinkIdle = TRUE;
- Ax88772Rx ( pNicDevice, bLinkIdle );
- pMode->MediaPresent = pNicDevice->bLinkUp;
-
- //
- // Release the synchronization with Ax88772Timer
- //
- gBS->RestoreTPL ( TplPrevious );
-
- //
- // Return the interrupt status
- //
- if ( NULL != pInterruptStatus ) {
- *pInterruptStatus = 0;
- }
- Status = EFI_SUCCESS;
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Resets the network adapter and allocates the transmit and receive buffers
- required by the network interface; optionally, also requests allocation of
- additional transmit and receive buffers. This routine must be called before
- any other routine in the Simple Network protocol is called.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] ExtraRxBufferSize Size in bytes to add to the receive buffer allocation
- @param [in] ExtraTxBufferSize Size in bytes to add to the transmit buffer allocation
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_OUT_OF_RESOURCES There was not enough memory for the transmit and receive buffers
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Initialize (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN UINTN ExtraRxBufferSize,
- IN UINTN ExtraTxBufferSize
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // Determine if the interface is already started
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkStarted == pMode->State ) {
- if (( 0 == ExtraRxBufferSize ) && ( 0 == ExtraTxBufferSize )) {
- //
- // Start the adapter
- //
- Status = SN_Reset ( pSimpleNetwork, FALSE );
- if ( !EFI_ERROR ( Status )) {
- //
- // Update the network state
- //
- pMode->State = EfiSimpleNetworkInitialized;
- }
- }
- else {
- Status = EFI_UNSUPPORTED;
- }
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function converts a multicast IP address to a multicast HW MAC address
- for all packet transactions.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bIPv6 Set to TRUE if the multicast IP address is IPv6 [RFC2460].
- Set to FALSE if the multicast IP address is IPv4 [RFC 791].
- @param [in] pIP The multicast IP address that is to be converted to a
- multicast HW MAC address.
- @param [in] pMAC The multicast HW MAC address that is to be generated from IP.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_MCastIPtoMAC (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bIPv6,
- IN EFI_IP_ADDRESS * pIP,
- IN EFI_MAC_ADDRESS * pMAC
- )
-{
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // This is not currently supported
- //
- Status = EFI_UNSUPPORTED;
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function performs read and write operations on the NVRAM device
- attached to a network interface.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] ReadWrite TRUE for read operations, FALSE for write operations.
- @param [in] Offset Byte offset in the NVRAM device at which to start the
- read or write operation. This must be a multiple of
- NvRamAccessSize and less than NvRamSize.
- @param [in] BufferSize The number of bytes to read or write from the NVRAM device.
- This must also be a multiple of NvramAccessSize.
- @param [in, out] pBuffer A pointer to the data buffer.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_NvData (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN ReadWrite,
- IN UINTN Offset,
- IN UINTN BufferSize,
- IN OUT VOID * pBuffer
- )
-{
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // This is not currently supported
- //
- Status = EFI_UNSUPPORTED;
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Attempt to receive a packet from the network adapter.
-
- This function retrieves one packet from the receive queue of the network
- interface. If there are no packets on the receive queue, then EFI_NOT_READY
- will be returned. If there is a packet on the receive queue, and the size
- of the packet is smaller than BufferSize, then the contents of the packet
- will be placed in Buffer, and BufferSize will be udpated with the actual
- size of the packet. In addition, if SrcAddr, DestAddr, and Protocol are
- not NULL, then these values will be extracted from the media header and
- returned. If BufferSize is smaller than the received packet, then the
- size of the receive packet will be placed in BufferSize and
- EFI_BUFFER_TOO_SMALL will be returned.
-
- This routine calls ::Ax88772Rx to update the media status and
- empty the network adapter of receive packets.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [out] pHeaderSize The size, in bytes, of the media header to be filled in by
- the Transmit() function. If HeaderSize is non-zero, then
- it must be equal to SimpleNetwork->Mode->MediaHeaderSize
- and DestAddr and Protocol parameters must not be NULL.
- @param [out] pBufferSize The size, in bytes, of the entire packet (media header and
- data) to be transmitted through the network interface.
- @param [out] pBuffer A pointer to the packet (media header followed by data) to
- to be transmitted. This parameter can not be NULL. If
- HeaderSize is zero, then the media header is Buffer must
- already be filled in by the caller. If HeaderSize is nonzero,
- then the media header will be filled in by the Transmit()
- function.
- @param [out] pSrcAddr The source HW MAC address. If HeaderSize is zero, then
- this parameter is ignored. If HeaderSize is nonzero and
- SrcAddr is NULL, then SimpleNetwork->Mode->CurrentAddress
- is used for the source HW MAC address.
- @param [out] pDestAddr The destination HW MAC address. If HeaderSize is zero, then
- this parameter is ignored.
- @param [out] pProtocol The type of header to build. If HeaderSize is zero, then
- this parameter is ignored.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_NOT_READY No packets have been received on the network interface.
- @retval EFI_BUFFER_TOO_SMALL The packet is larger than BufferSize bytes.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Receive (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- OUT UINTN * pHeaderSize,
- OUT UINTN * pBufferSize,
- OUT VOID * pBuffer,
- OUT EFI_MAC_ADDRESS * pSrcAddr,
- OUT EFI_MAC_ADDRESS * pDestAddr,
- OUT UINT16 * pProtocol
- )
-{
- ETHERNET_HEADER * pHeader;
- EFI_SIMPLE_NETWORK_MODE * pMode;
- NIC_DEVICE * pNicDevice;
- RX_TX_PACKET * pRxPacket;
- EFI_STATUS Status;
- EFI_TPL TplPrevious;
- UINT16 Type;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // The interface must be running
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkInitialized == pMode->State ) {
- //
- // Synchronize with Ax88772Timer
- //
- VERIFY_TPL ( TPL_AX88772 );
- TplPrevious = gBS->RaiseTPL ( TPL_AX88772 );
-
- //
- // Update the link status
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- Ax88772Rx ( pNicDevice, FALSE );
- pMode->MediaPresent = pNicDevice->bLinkUp;
- if ( pMode->MediaPresent ) {
- //
- // Attempt to receive a packet
- //
- pRxPacket = pNicDevice->pRxHead;
- if ( NULL != pRxPacket ) {
- pNicDevice->pRxHead = pRxPacket->pNext;
- if ( NULL == pNicDevice->pRxHead ) {
- pNicDevice->pRxTail = NULL;
- }
-
- //
- // Copy the received packet into the receive buffer
- //
- *pBufferSize = pRxPacket->Length;
- CopyMem ( pBuffer, &pRxPacket->Data[0], pRxPacket->Length );
- pHeader = (ETHERNET_HEADER *) &pRxPacket->Data[0];
- if ( NULL != pHeaderSize ) {
- *pHeaderSize = sizeof ( *pHeader );
- }
- if ( NULL != pDestAddr ) {
- CopyMem ( pDestAddr, &pHeader->dest_addr, PXE_HWADDR_LEN_ETHER );
- }
- if ( NULL != pSrcAddr ) {
- CopyMem ( pSrcAddr, &pHeader->src_addr, PXE_HWADDR_LEN_ETHER );
- }
- if ( NULL != pProtocol ) {
- Type = pHeader->type;
- Type = (UINT16)(( Type >> 8 ) | ( Type << 8 ));
- *pProtocol = Type;
- }
- Status = EFI_SUCCESS;
- }
- else {
- //
- // No receive packets available
- //
- Status = EFI_NOT_READY;
- }
- }
- else {
- //
- // Link no up
- //
- Status = EFI_NOT_READY;
- }
-
- //
- // Release the synchronization with Ax88772Timer
- //
- gBS->RestoreTPL ( TplPrevious );
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function is used to enable and disable the hardware and software receive
- filters for the underlying network device.
-
- The receive filter change is broken down into three steps:
-
- 1. The filter mask bits that are set (ON) in the Enable parameter
- are added to the current receive filter settings.
-
- 2. The filter mask bits that are set (ON) in the Disable parameter
- are subtracted from the updated receive filter settins.
-
- 3. If the resulting filter settigns is not supported by the hardware
- a more liberal setting is selected.
-
- If the same bits are set in the Enable and Disable parameters, then the bits
- in the Disable parameter takes precedence.
-
- If the ResetMCastFilter parameter is TRUE, then the multicast address list
- filter is disabled (irregardless of what other multicast bits are set in
- the enable and Disable parameters). The SNP->Mode->MCastFilterCount field
- is set to zero. The SNP->Mode->MCastFilter contents are undefined.
-
- After enableing or disabling receive filter settings, software should
- verify the new settings by checking the SNP->Mode->ReceeiveFilterSettings,
- SNP->Mode->MCastFilterCount and SNP->Mode->MCastFilter fields.
-
- Note: Some network drivers and/or devices will automatically promote
- receive filter settings if the requested setting can not be honored.
- For example, if a request for four multicast addresses is made and
- the underlying hardware only supports two multicast addresses the
- driver might set the promiscuous or promiscuous multicast receive filters
- instead. The receiving software is responsible for discarding any extra
- packets that get through the hardware receive filters.
-
- If ResetMCastFilter is TRUE, then the multicast receive filter list
- on the network interface will be reset to the default multicast receive
- filter list. If ResetMCastFilter is FALSE, and this network interface
- allows the multicast receive filter list to be modified, then the
- MCastFilterCnt and MCastFilter are used to update the current multicast
- receive filter list. The modified receive filter list settings can be
- found in the MCastFilter field of EFI_SIMPLE_NETWORK_MODE.
-
- This routine calls ::ReceiveFilterUpdate to update the receive
- state in the network adapter.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] Enable A bit mask of receive filters to enable on the network interface.
- @param [in] Disable A bit mask of receive filters to disable on the network interface.
- For backward compatibility with EFI 1.1 platforms, the
- EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit must be set
- when the ResetMCastFilter parameter is TRUE.
- @param [in] bResetMCastFilter Set to TRUE to reset the contents of the multicast receive
- filters on the network interface to their default values.
- @param [in] MCastFilterCnt Number of multicast HW MAC address in the new MCastFilter list.
- This value must be less than or equal to the MaxMCastFilterCnt
- field of EFI_SIMPLE_NETWORK_MODE. This field is optional if
- ResetMCastFilter is TRUE.
- @param [in] pMCastFilter A pointer to a list of new multicast receive filter HW MAC
- addresses. This list will replace any existing multicast
- HW MAC address list. This field is optional if ResetMCastFilter
- is TRUE.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_ReceiveFilters (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN UINT32 Enable,
- IN UINT32 Disable,
- IN BOOLEAN bResetMCastFilter,
- IN UINTN MCastFilterCnt,
- IN EFI_MAC_ADDRESS * pMCastFilter
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_MAC_ADDRESS * pMulticastAddress;
- EFI_MAC_ADDRESS * pTableEnd;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- Status = EFI_INVALID_PARAMETER;
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- pMode = pSimpleNetwork->Mode;
-
- //
- // Update the multicast list if necessary
- //
- if ( !bResetMCastFilter ) {
- if ( 0 != MCastFilterCnt ) {
- if (( MAX_MCAST_FILTER_CNT >= MCastFilterCnt )
- && ( NULL != pMCastFilter )) {
- //
- // Verify the multicast addresses
- //
- pMulticastAddress = pMCastFilter;
- pTableEnd = pMulticastAddress + MCastFilterCnt;
- while ( pTableEnd > pMulticastAddress ) {
- //
- // The first digit of the multicast address must have the LSB set
- //
- if ( 0 == ( pMulticastAddress->Addr[0] & 1 )) {
- //
- // Invalid multicast address
- //
- break;
- }
- pMulticastAddress += 1;
- }
- if ( pTableEnd == pMulticastAddress ) {
- //
- // Update the multicast filter list.
- //
- CopyMem (&pMode->MCastFilter[0],
- pMCastFilter,
- MCastFilterCnt * sizeof ( *pMCastFilter ));
- Status = EFI_SUCCESS;
- }
- }
- }
- else {
- Status = EFI_SUCCESS;
- }
- }
- else {
- //
- // No multicast address list is specified
- //
- MCastFilterCnt = 0;
- Status = EFI_SUCCESS;
- }
- if ( !EFI_ERROR ( Status )) {
- //
- // The parameters are valid!
- //
- pMode->ReceiveFilterSetting |= Enable;
- pMode->ReceiveFilterSetting &= ~Disable;
- pMode->MCastFilterCount = (UINT32)MCastFilterCnt;
-
- //
- // Update the receive filters in the adapter
- //
- Status = ReceiveFilterUpdate ( pSimpleNetwork );
- }
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Reset the network adapter.
-
- Resets a network adapter and reinitializes it with the parameters that
- were provided in the previous call to Initialize (). The transmit and
- receive queues are cleared. Receive filters, the station address, the
- statistics, and the multicast-IP-to-HW MAC addresses are not reset by
- this call.
-
- This routine calls ::Ax88772Reset to perform the adapter specific
- reset operation. This routine also starts the link negotiation
- by calling ::Ax88772NegotiateLinkStart.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bExtendedVerification Indicates that the driver may perform a more
- exhaustive verification operation of the device
- during reset.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Reset (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bExtendedVerification
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- NIC_DEVICE * pNicDevice;
- RX_TX_PACKET * pRxPacket;
- EFI_STATUS Status;
- EFI_TPL TplPrevious;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // Synchronize with Ax88772Timer
- //
- VERIFY_TPL ( TPL_AX88772 );
- TplPrevious = gBS->RaiseTPL ( TPL_AX88772 );
-
- //
- // Update the device state
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- pNicDevice->bComplete = FALSE;
- pNicDevice->bLinkUp = FALSE;
-
- pMode = pSimpleNetwork->Mode;
- pMode->MediaPresent = FALSE;
-
- //
- // Discard any received packets
- //
- while ( NULL != pNicDevice->pRxHead ) {
- //
- // Remove the packet from the received packet list
- //
- pRxPacket = pNicDevice->pRxHead;
- pNicDevice->pRxHead = pRxPacket->pNext;
-
- //
- // Queue the packet to the free list
- //
- pRxPacket->pNext = pNicDevice->pRxFree;
- pNicDevice->pRxFree = pRxPacket;
- }
- pNicDevice->pRxTail = NULL;
-
- //
- // Reset the device
- //
- Status = Ax88772Reset ( pNicDevice );
- if ( !EFI_ERROR ( Status )) {
- //
- // Update the receive filters in the adapter
- //
- Status = ReceiveFilterUpdate ( pSimpleNetwork );
-
- //
- // Try to get a connection to the network
- //
- if ( !EFI_ERROR ( Status )) {
- //
- // Start the autonegotiation
- //
- Status = Ax88772NegotiateLinkStart ( pNicDevice );
- }
- }
-
- //
- // Release the synchronization with Ax88772Timer
- //
- gBS->RestoreTPL ( TplPrevious );
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Initialize the simple network protocol.
-
- This routine calls ::Ax88772MacAddressGet to obtain the
- MAC address.
-
- @param [in] pNicDevice NIC_DEVICE_INSTANCE pointer
-
- @retval EFI_SUCCESS Setup was successful
-
-**/
-EFI_STATUS
-SN_Setup (
- IN NIC_DEVICE * pNicDevice
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Initialize the simple network protocol
- //
- pSimpleNetwork = &pNicDevice->SimpleNetwork;
- pSimpleNetwork->Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;
- pSimpleNetwork->Start = (EFI_SIMPLE_NETWORK_START)SN_Start;
- pSimpleNetwork->Stop = (EFI_SIMPLE_NETWORK_STOP)SN_Stop;
- pSimpleNetwork->Initialize = (EFI_SIMPLE_NETWORK_INITIALIZE)SN_Initialize;
- pSimpleNetwork->Reset = (EFI_SIMPLE_NETWORK_RESET)SN_Reset;
- pSimpleNetwork->Shutdown = (EFI_SIMPLE_NETWORK_SHUTDOWN)SN_Shutdown;
- pSimpleNetwork->ReceiveFilters = (EFI_SIMPLE_NETWORK_RECEIVE_FILTERS)SN_ReceiveFilters;
- pSimpleNetwork->StationAddress = (EFI_SIMPLE_NETWORK_STATION_ADDRESS)SN_StationAddress;
- pSimpleNetwork->Statistics = (EFI_SIMPLE_NETWORK_STATISTICS)SN_Statistics;
- pSimpleNetwork->MCastIpToMac = (EFI_SIMPLE_NETWORK_MCAST_IP_TO_MAC)SN_MCastIPtoMAC;
- pSimpleNetwork->NvData = (EFI_SIMPLE_NETWORK_NVDATA)SN_NvData;
- pSimpleNetwork->GetStatus = (EFI_SIMPLE_NETWORK_GET_STATUS)SN_GetStatus;
- pSimpleNetwork->Transmit = (EFI_SIMPLE_NETWORK_TRANSMIT)SN_Transmit;
- pSimpleNetwork->Receive = (EFI_SIMPLE_NETWORK_RECEIVE)SN_Receive;
- pSimpleNetwork->WaitForPacket = NULL;
- pMode = &pNicDevice->SimpleNetworkData;
- pSimpleNetwork->Mode = pMode;
-
- pMode->State = EfiSimpleNetworkStopped;
- pMode->HwAddressSize = PXE_HWADDR_LEN_ETHER;
- pMode->MediaHeaderSize = sizeof ( ETHERNET_HEADER );
- pMode->MaxPacketSize = MAX_ETHERNET_PKT_SIZE;
- pMode->NvRamSize = 0;
- pMode->NvRamAccessSize = 0;
- pMode->ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST
- | EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST
- | EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST
- | EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS
- | EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
- pMode->ReceiveFilterSetting = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST
- | EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;
- pMode->MaxMCastFilterCount = MAX_MCAST_FILTER_CNT;
- pMode->MCastFilterCount = 0;
- SetMem ( &pMode->BroadcastAddress,
- PXE_HWADDR_LEN_ETHER,
- 0xff );
- pMode->IfType = EfiNetworkInterfaceUndi;
- pMode->MacAddressChangeable = TRUE;
- pMode->MultipleTxSupported = TRUE;
- pMode->MediaPresentSupported = TRUE;
- pMode->MediaPresent = FALSE;
-
- //
- // Read the MAC address
- //
- pNicDevice->PhyId = PHY_ID_INTERNAL;
- pNicDevice->b100Mbps = TRUE;
- pNicDevice->bFullDuplex = TRUE;
-
- Status = gBS->AllocatePool ( EfiRuntimeServicesData,
- MAX_BULKIN_SIZE,
- (VOID **) &pNicDevice->pBulkInBuff);
- if ( EFI_ERROR(Status)) {
- DEBUG (( EFI_D_ERROR, "Memory are not enough\n"));
- return Status;
- }
-
- Status = Ax88772MacAddressGet (
- pNicDevice,
- &pMode->PermanentAddress.Addr[0]);
- if ( !EFI_ERROR ( Status )) {
- //
- // Display the MAC address
- //
- DEBUG (( DEBUG_MAC_ADDRESS | DEBUG_INFO,
- "MAC: %02x-%02x-%02x-%02x-%02x-%02x\n",
- pMode->PermanentAddress.Addr[0],
- pMode->PermanentAddress.Addr[1],
- pMode->PermanentAddress.Addr[2],
- pMode->PermanentAddress.Addr[3],
- pMode->PermanentAddress.Addr[4],
- pMode->PermanentAddress.Addr[5]));
-
- //
- // Use the hardware address as the current address
- //
- CopyMem ( &pMode->CurrentAddress,
- &pMode->PermanentAddress,
- PXE_HWADDR_LEN_ETHER );
- }
-
- //
- // Return the setup status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This routine starts the network interface.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_ALREADY_STARTED The network interface was already started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Start (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- )
-{
- NIC_DEVICE * pNicDevice;
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- Status = EFI_INVALID_PARAMETER;
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkStopped == pMode->State ) {
- //
- // Initialize the mode structure
- // NVRAM access is not supported
- //
- ZeroMem ( pMode, sizeof ( *pMode ));
-
- pMode->State = EfiSimpleNetworkStarted;
- pMode->HwAddressSize = PXE_HWADDR_LEN_ETHER;
- pMode->MediaHeaderSize = sizeof ( ETHERNET_HEADER );
- pMode->MaxPacketSize = MAX_ETHERNET_PKT_SIZE;
- pMode->ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST
- | EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST
- | EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST
- | EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS
- | EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
- pMode->ReceiveFilterSetting = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST;
- pMode->MaxMCastFilterCount = MAX_MCAST_FILTER_CNT;
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- Status = Ax88772MacAddressGet ( pNicDevice, &pMode->PermanentAddress.Addr[0]);
- CopyMem ( &pMode->CurrentAddress,
- &pMode->PermanentAddress,
- sizeof ( pMode->CurrentAddress ));
- pMode->BroadcastAddress.Addr[0] = 0xff;
- pMode->BroadcastAddress.Addr[1] = 0xff;
- pMode->BroadcastAddress.Addr[2] = 0xff;
- pMode->BroadcastAddress.Addr[3] = 0xff;
- pMode->BroadcastAddress.Addr[4] = 0xff;
- pMode->BroadcastAddress.Addr[5] = 0xff;
- pMode->IfType = 1;
- pMode->MacAddressChangeable = TRUE;
- pMode->MultipleTxSupported = TRUE;
- pMode->MediaPresentSupported = TRUE;
- pMode->MediaPresent = FALSE;
- }
- else {
- Status = EFI_ALREADY_STARTED;
- }
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Set the MAC address.
-
- This function modifies or resets the current station address of a
- network interface. If Reset is TRUE, then the current station address
- is set ot the network interface's permanent address. If Reset if FALSE
- then the current station address is changed to the address specified by
- pNew.
-
- This routine calls ::Ax88772MacAddressSet to update the MAC address
- in the network adapter.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bReset Flag used to reset the station address to the
- network interface's permanent address.
- @param [in] pNew New station address to be used for the network
- interface.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_StationAddress (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bReset,
- IN EFI_MAC_ADDRESS * pNew
- )
-{
- NIC_DEVICE * pNicDevice;
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork )
- && ( NULL != pSimpleNetwork->Mode )
- && (( !bReset ) || ( bReset && ( NULL != pNew )))) {
- //
- // Verify that the adapter is already started
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkStarted == pMode->State ) {
- //
- // Determine the adapter MAC address
- //
- if ( bReset ) {
- //
- // Use the permanent address
- //
- CopyMem ( &pMode->CurrentAddress,
- &pMode->PermanentAddress,
- sizeof ( pMode->CurrentAddress ));
- }
- else {
- //
- // Use the specified address
- //
- CopyMem ( &pMode->CurrentAddress,
- pNew,
- sizeof ( pMode->CurrentAddress ));
- }
-
- //
- // Update the address on the adapter
- //
- Status = Ax88772MacAddressSet ( pNicDevice, &pMode->CurrentAddress.Addr[0]);
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function resets or collects the statistics on a network interface.
- If the size of the statistics table specified by StatisticsSize is not
- big enough for all of the statistics that are collected by the network
- interface, then a partial buffer of statistics is returned in
- StatisticsTable.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bReset Set to TRUE to reset the statistics for the network interface.
- @param [in, out] pStatisticsSize On input the size, in bytes, of StatisticsTable. On output
- the size, in bytes, of the resulting table of statistics.
- @param [out] pStatisticsTable A pointer to the EFI_NETWORK_STATISTICS structure that
- conains the statistics.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_BUFFER_TOO_SMALL The pStatisticsTable is NULL or the buffer is too small.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Statistics (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bReset,
- IN OUT UINTN * pStatisticsSize,
- OUT EFI_NETWORK_STATISTICS * pStatisticsTable
- )
-{
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // This is not currently supported
- //
- Status = EFI_UNSUPPORTED;
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function stops a network interface. This call is only valid
- if the network interface is in the started state.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Stop (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // Determine if the interface is started
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkStopped != pMode->State ) {
- if ( EfiSimpleNetworkStarted == pMode->State ) {
- //
- // Release the resources acquired in SN_Start
- //
-
- //
- // Mark the adapter as stopped
- //
- pMode->State = EfiSimpleNetworkStopped;
- Status = EFI_SUCCESS;
- }
- else {
- Status = EFI_UNSUPPORTED;
- }
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- This function releases the memory buffers assigned in the Initialize() call.
- Pending transmits and receives are lost, and interrupts are cleared and disabled.
- After this call, only Initialize() and Stop() calls may be used.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Shutdown (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- )
-{
- EFI_SIMPLE_NETWORK_MODE * pMode;
- UINT32 RxFilter;
- EFI_STATUS Status;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // Determine if the interface is already started
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkInitialized == pMode->State ) {
- //
- // Stop the adapter
- //
- RxFilter = pMode->ReceiveFilterSetting;
- pMode->ReceiveFilterSetting = 0;
- Status = SN_Reset ( pSimpleNetwork, FALSE );
- pMode->ReceiveFilterSetting = RxFilter;
- if ( !EFI_ERROR ( Status )) {
- //
- // Release the resources acquired by SN_Initialize
- //
-
- //
- // Update the network state
- //
- pMode->State = EfiSimpleNetworkStarted;
- }
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
-
-
-/**
- Send a packet over the network.
-
- This function places the packet specified by Header and Buffer on
- the transmit queue. This function performs a non-blocking transmit
- operation. When the transmit is complete, the buffer is returned
- via the GetStatus() call.
-
- This routine calls ::Ax88772Rx to empty the network adapter of
- receive packets. The routine then passes the transmit packet
- to the network adapter.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] HeaderSize The size, in bytes, of the media header to be filled in by
- the Transmit() function. If HeaderSize is non-zero, then
- it must be equal to SimpleNetwork->Mode->MediaHeaderSize
- and DestAddr and Protocol parameters must not be NULL.
- @param [in] BufferSize The size, in bytes, of the entire packet (media header and
- data) to be transmitted through the network interface.
- @param [in] pBuffer A pointer to the packet (media header followed by data) to
- to be transmitted. This parameter can not be NULL. If
- HeaderSize is zero, then the media header is Buffer must
- already be filled in by the caller. If HeaderSize is nonzero,
- then the media header will be filled in by the Transmit()
- function.
- @param [in] pSrcAddr The source HW MAC address. If HeaderSize is zero, then
- this parameter is ignored. If HeaderSize is nonzero and
- SrcAddr is NULL, then SimpleNetwork->Mode->CurrentAddress
- is used for the source HW MAC address.
- @param [in] pDestAddr The destination HW MAC address. If HeaderSize is zero, then
- this parameter is ignored.
- @param [in] pProtocol The type of header to build. If HeaderSize is zero, then
- this parameter is ignored.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_NOT_READY The network interface is too busy to accept this transmit request.
- @retval EFI_BUFFER_TOO_SMALL The BufferSize parameter is too small.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Transmit (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN UINTN HeaderSize,
- IN UINTN BufferSize,
- IN VOID * pBuffer,
- IN EFI_MAC_ADDRESS * pSrcAddr,
- IN EFI_MAC_ADDRESS * pDestAddr,
- IN UINT16 * pProtocol
- )
-{
- RX_TX_PACKET Packet;
- ETHERNET_HEADER * pHeader;
- EFI_SIMPLE_NETWORK_MODE * pMode;
- NIC_DEVICE * pNicDevice;
- EFI_USB_IO_PROTOCOL * pUsbIo;
- EFI_STATUS Status;
- EFI_TPL TplPrevious;
- UINTN TransferLength;
- UINT32 TransferStatus;
- UINT16 Type;
-
- DBG_ENTER ( );
-
- //
- // Verify the parameters
- //
- if (( NULL != pSimpleNetwork ) && ( NULL != pSimpleNetwork->Mode )) {
- //
- // The interface must be running
- //
- pMode = pSimpleNetwork->Mode;
- if ( EfiSimpleNetworkInitialized == pMode->State ) {
- //
- // Synchronize with Ax88772Timer
- //
- VERIFY_TPL ( TPL_AX88772 );
- TplPrevious = gBS->RaiseTPL ( TPL_AX88772 );
-
- //
- // Update the link status
- //
- pNicDevice = DEV_FROM_SIMPLE_NETWORK ( pSimpleNetwork );
-
- //
- //No need to call receive to receive packet
- //
- //Ax88772Rx ( pNicDevice, FALSE );
- pMode->MediaPresent = pNicDevice->bLinkUp;
-
- //
- // Release the synchronization with Ax88772Timer
- //
- gBS->RestoreTPL ( TplPrevious );
- if ( pMode->MediaPresent ) {
- //
- // Copy the packet into the USB buffer
- //
- CopyMem ( &Packet.Data[0], pBuffer, BufferSize );
- Packet.Length = (UINT16) BufferSize;
-
- //
- // Transmit the packet
- //
- pHeader = (ETHERNET_HEADER *) &Packet.Data[0];
- if ( 0 != HeaderSize ) {
- if ( NULL != pDestAddr ) {
- CopyMem ( &pHeader->dest_addr, pDestAddr, PXE_HWADDR_LEN_ETHER );
- }
- if ( NULL != pSrcAddr ) {
- CopyMem ( &pHeader->src_addr, pSrcAddr, PXE_HWADDR_LEN_ETHER );
- }
- else {
- CopyMem ( &pHeader->src_addr, &pMode->CurrentAddress.Addr[0], PXE_HWADDR_LEN_ETHER );
- }
- if ( NULL != pProtocol ) {
- Type = *pProtocol;
- }
- else {
- Type = Packet.Length;
- }
- Type = (UINT16)(( Type >> 8 ) | ( Type << 8 ));
- pHeader->type = Type;
- }
- if ( Packet.Length < MIN_ETHERNET_PKT_SIZE ) {
- Packet.Length = MIN_ETHERNET_PKT_SIZE;
- ZeroMem ( &Packet.Data[ BufferSize ],
- Packet.Length - BufferSize );
- }
- DEBUG (( DEBUG_TX | DEBUG_INFO,
- "TX: %02x-%02x-%02x-%02x-%02x-%02x %02x-%02x-%02x-%02x-%02x-%02x %02x-%02x %d bytes\r\n",
- Packet.Data[0],
- Packet.Data[1],
- Packet.Data[2],
- Packet.Data[3],
- Packet.Data[4],
- Packet.Data[5],
- Packet.Data[6],
- Packet.Data[7],
- Packet.Data[8],
- Packet.Data[9],
- Packet.Data[10],
- Packet.Data[11],
- Packet.Data[12],
- Packet.Data[13],
- Packet.Length ));
- Packet.LengthBar = ~Packet.Length;
- TransferLength = sizeof ( Packet.Length )
- + sizeof ( Packet.LengthBar )
- + Packet.Length;
-
- //
- // Work around USB bus driver bug where a timeout set by receive
- // succeeds but the timeout expires immediately after, causing the
- // transmit operation to timeout.
- //
- pUsbIo = pNicDevice->pUsbIo;
- Status = pUsbIo->UsbBulkTransfer ( pUsbIo,
- BULK_OUT_ENDPOINT,
- &Packet.Length,
- &TransferLength,
- 0xfffffffe,
- &TransferStatus );
- if ( !EFI_ERROR ( Status )) {
- Status = TransferStatus;
- }
- if (( !EFI_ERROR ( Status ))
- && ( TransferLength != (UINTN)( Packet.Length + 4 ))) {
- Status = EFI_WARN_WRITE_FAILURE;
- }
- if ( EFI_SUCCESS == Status ) {
- pNicDevice->pTxBuffer = pBuffer;
- }
- else {
- DEBUG (( DEBUG_ERROR | DEBUG_INFO,
- "Ax88772 USB transmit error, TransferLength: %d, Status: %r\r\n",
- sizeof ( Packet.Length ) + Packet.Length,
- Status ));
- //
- // Reset the controller to fix the error
- //
- if ( EFI_DEVICE_ERROR == Status ) {
- SN_Reset ( pSimpleNetwork, FALSE );
- }
- }
- }
- else {
- //
- // No packets available.
- //
- Status = EFI_NOT_READY;
- }
- }
- else {
- Status = EFI_NOT_STARTED;
- }
- }
- else {
- DEBUG (( DEBUG_ERROR | DEBUG_INFO,
- "Ax88772 invalid transmit parameter\r\n"
- " 0x%08x: HeaderSize\r\n"
- " 0x%08x: BufferSize\r\n"
- " 0x%08x: Buffer\r\n"
- " 0x%08x: SrcAddr\r\n"
- " 0x%08x: DestAddr\r\n"
- " 0x%04x: Protocol\r\n",
- HeaderSize,
- BufferSize,
- pBuffer,
- pSrcAddr,
- pDestAddr,
- pProtocol ));
- Status = EFI_INVALID_PARAMETER;
- }
-
- //
- // Return the operation status
- //
- DBG_EXIT_STATUS ( Status );
- return Status;
-}
|