diff options
Diffstat (limited to 'OvmfPkg/PlatformPei')
| -rw-r--r-- | OvmfPkg/PlatformPei/MemDetect.c | 804 | ||||
| -rw-r--r-- | OvmfPkg/PlatformPei/Platform.h | 12 |
2 files changed, 1 insertions, 815 deletions
diff --git a/OvmfPkg/PlatformPei/MemDetect.c b/OvmfPkg/PlatformPei/MemDetect.c index 23a583ed33..61d7d3059f 100644 --- a/OvmfPkg/PlatformPei/MemDetect.c +++ b/OvmfPkg/PlatformPei/MemDetect.c @@ -34,7 +34,7 @@ Module Name: #include <Library/PciLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/ResourcePublicationLib.h>
-#include <Library/MtrrLib.h>
+
#include <Library/QemuFwCfgLib.h>
#include <Library/QemuFwCfgSimpleParserLib.h>
@@ -124,501 +124,6 @@ Q35SmramAtDefaultSmbaseInitialization ( ASSERT_RETURN_ERROR (PcdStatus);
}
-VOID
-EFIAPI
-PlatformQemuUc32BaseInitialization (
- IN OUT EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- UINT32 LowerMemorySize;
-
- if (PlatformInfoHob->HostBridgeDevId == 0xffff /* microvm */) {
- return;
- }
-
- if (PlatformInfoHob->HostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
- //
- // On q35, the 32-bit area that we'll mark as UC, through variable MTRRs,
- // starts at PcdPciExpressBaseAddress. The platform DSC is responsible for
- // setting PcdPciExpressBaseAddress such that describing the
- // [PcdPciExpressBaseAddress, 4GB) range require a very small number of
- // variable MTRRs (preferably 1 or 2).
- //
- ASSERT (FixedPcdGet64 (PcdPciExpressBaseAddress) <= MAX_UINT32);
- PlatformInfoHob->Uc32Base = (UINT32)FixedPcdGet64 (PcdPciExpressBaseAddress);
- return;
- }
-
- if (PlatformInfoHob->HostBridgeDevId == CLOUDHV_DEVICE_ID) {
- PlatformInfoHob->Uc32Size = CLOUDHV_MMIO_HOLE_SIZE;
- PlatformInfoHob->Uc32Base = CLOUDHV_MMIO_HOLE_ADDRESS;
- return;
- }
-
- ASSERT (PlatformInfoHob->HostBridgeDevId == INTEL_82441_DEVICE_ID);
- //
- // On i440fx, start with the [LowerMemorySize, 4GB) range. Make sure one
- // variable MTRR suffices by truncating the size to a whole power of two,
- // while keeping the end affixed to 4GB. This will round the base up.
- //
- LowerMemorySize = PlatformGetSystemMemorySizeBelow4gb (PlatformInfoHob);
- PlatformInfoHob->Uc32Size = GetPowerOfTwo32 ((UINT32)(SIZE_4GB - LowerMemorySize));
- PlatformInfoHob->Uc32Base = (UINT32)(SIZE_4GB - PlatformInfoHob->Uc32Size);
- //
- // Assuming that LowerMemorySize is at least 1 byte, Uc32Size is at most 2GB.
- // Therefore mQemuUc32Base is at least 2GB.
- //
- ASSERT (PlatformInfoHob->Uc32Base >= BASE_2GB);
-
- if (PlatformInfoHob->Uc32Base != LowerMemorySize) {
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: rounded UC32 base from 0x%x up to 0x%x, for "
- "an UC32 size of 0x%x\n",
- __FUNCTION__,
- LowerMemorySize,
- PlatformInfoHob->Uc32Base,
- PlatformInfoHob->Uc32Size
- ));
- }
-}
-
-/**
- Iterate over the RAM entries in QEMU's fw_cfg E820 RAM map that start outside
- of the 32-bit address range.
-
- Find the highest exclusive >=4GB RAM address, or produce memory resource
- descriptor HOBs for RAM entries that start at or above 4GB.
-
- @param[out] MaxAddress If MaxAddress is NULL, then PlatformScanOrAdd64BitE820Ram()
- produces memory resource descriptor HOBs for RAM
- entries that start at or above 4GB.
-
- Otherwise, MaxAddress holds the highest exclusive
- >=4GB RAM address on output. If QEMU's fw_cfg E820
- RAM map contains no RAM entry that starts outside of
- the 32-bit address range, then MaxAddress is exactly
- 4GB on output.
-
- @retval EFI_SUCCESS The fw_cfg E820 RAM map was found and processed.
-
- @retval EFI_PROTOCOL_ERROR The RAM map was found, but its size wasn't a
- whole multiple of sizeof(EFI_E820_ENTRY64). No
- RAM entry was processed.
-
- @return Error codes from QemuFwCfgFindFile(). No RAM
- entry was processed.
-**/
-STATIC
-EFI_STATUS
-PlatformScanOrAdd64BitE820Ram (
- IN BOOLEAN AddHighHob,
- OUT UINT64 *LowMemory OPTIONAL,
- OUT UINT64 *MaxAddress OPTIONAL
- )
-{
- EFI_STATUS Status;
- FIRMWARE_CONFIG_ITEM FwCfgItem;
- UINTN FwCfgSize;
- EFI_E820_ENTRY64 E820Entry;
- UINTN Processed;
-
- Status = QemuFwCfgFindFile ("etc/e820", &FwCfgItem, &FwCfgSize);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (FwCfgSize % sizeof E820Entry != 0) {
- return EFI_PROTOCOL_ERROR;
- }
-
- if (LowMemory != NULL) {
- *LowMemory = 0;
- }
-
- if (MaxAddress != NULL) {
- *MaxAddress = BASE_4GB;
- }
-
- QemuFwCfgSelectItem (FwCfgItem);
- for (Processed = 0; Processed < FwCfgSize; Processed += sizeof E820Entry) {
- QemuFwCfgReadBytes (sizeof E820Entry, &E820Entry);
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: Base=0x%Lx Length=0x%Lx Type=%u\n",
- __FUNCTION__,
- E820Entry.BaseAddr,
- E820Entry.Length,
- E820Entry.Type
- ));
- if (E820Entry.Type == EfiAcpiAddressRangeMemory) {
- if (AddHighHob && (E820Entry.BaseAddr >= BASE_4GB)) {
- UINT64 Base;
- UINT64 End;
-
- //
- // Round up the start address, and round down the end address.
- //
- Base = ALIGN_VALUE (E820Entry.BaseAddr, (UINT64)EFI_PAGE_SIZE);
- End = (E820Entry.BaseAddr + E820Entry.Length) &
- ~(UINT64)EFI_PAGE_MASK;
- if (Base < End) {
- PlatformAddMemoryRangeHob (Base, End);
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: PlatformAddMemoryRangeHob [0x%Lx, 0x%Lx)\n",
- __FUNCTION__,
- Base,
- End
- ));
- }
- }
-
- if (MaxAddress || LowMemory) {
- UINT64 Candidate;
-
- Candidate = E820Entry.BaseAddr + E820Entry.Length;
- if (MaxAddress && (Candidate > *MaxAddress)) {
- *MaxAddress = Candidate;
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: MaxAddress=0x%Lx\n",
- __FUNCTION__,
- *MaxAddress
- ));
- }
-
- if (LowMemory && (Candidate > *LowMemory) && (Candidate < BASE_4GB)) {
- *LowMemory = Candidate;
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: LowMemory=0x%Lx\n",
- __FUNCTION__,
- *LowMemory
- ));
- }
- }
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Returns PVH memmap
-
- @param Entries Pointer to PVH memmap
- @param Count Number of entries
-
- @return EFI_STATUS
-**/
-EFI_STATUS
-GetPvhMemmapEntries (
- struct hvm_memmap_table_entry **Entries,
- UINT32 *Count
- )
-{
- UINT32 *PVHResetVectorData;
- struct hvm_start_info *pvh_start_info;
-
- PVHResetVectorData = (VOID *)(UINTN)PcdGet32 (PcdXenPvhStartOfDayStructPtr);
- if (PVHResetVectorData == 0) {
- return EFI_NOT_FOUND;
- }
-
- pvh_start_info = (struct hvm_start_info *)(UINTN)PVHResetVectorData[0];
-
- *Entries = (struct hvm_memmap_table_entry *)(UINTN)pvh_start_info->memmap_paddr;
- *Count = pvh_start_info->memmap_entries;
-
- return EFI_SUCCESS;
-}
-
-STATIC
-UINT64
-GetHighestSystemMemoryAddressFromPvhMemmap (
- BOOLEAN Below4gb
- )
-{
- struct hvm_memmap_table_entry *Memmap;
- UINT32 MemmapEntriesCount;
- struct hvm_memmap_table_entry *Entry;
- EFI_STATUS Status;
- UINT32 Loop;
- UINT64 HighestAddress;
- UINT64 EntryEnd;
-
- HighestAddress = 0;
-
- Status = GetPvhMemmapEntries (&Memmap, &MemmapEntriesCount);
- ASSERT_EFI_ERROR (Status);
-
- for (Loop = 0; Loop < MemmapEntriesCount; Loop++) {
- Entry = Memmap + Loop;
- EntryEnd = Entry->addr + Entry->size;
-
- if ((Entry->type == XEN_HVM_MEMMAP_TYPE_RAM) &&
- (EntryEnd > HighestAddress))
- {
- if (Below4gb && (EntryEnd <= BASE_4GB)) {
- HighestAddress = EntryEnd;
- } else if (!Below4gb && (EntryEnd >= BASE_4GB)) {
- HighestAddress = EntryEnd;
- }
- }
- }
-
- return HighestAddress;
-}
-
-UINT32
-EFIAPI
-PlatformGetSystemMemorySizeBelow4gb (
- IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- EFI_STATUS Status;
- UINT64 LowerMemorySize = 0;
- UINT8 Cmos0x34;
- UINT8 Cmos0x35;
-
- if (PlatformInfoHob->HostBridgeDevId == CLOUDHV_DEVICE_ID) {
- // Get the information from PVH memmap
- return (UINT32)GetHighestSystemMemoryAddressFromPvhMemmap (TRUE);
- }
-
- Status = PlatformScanOrAdd64BitE820Ram (FALSE, &LowerMemorySize, NULL);
- if ((Status == EFI_SUCCESS) && (LowerMemorySize > 0)) {
- return (UINT32)LowerMemorySize;
- }
-
- //
- // CMOS 0x34/0x35 specifies the system memory above 16 MB.
- // * CMOS(0x35) is the high byte
- // * CMOS(0x34) is the low byte
- // * The size is specified in 64kb chunks
- // * Since this is memory above 16MB, the 16MB must be added
- // into the calculation to get the total memory size.
- //
-
- Cmos0x34 = (UINT8)PlatformCmosRead8 (0x34);
- Cmos0x35 = (UINT8)PlatformCmosRead8 (0x35);
-
- return (UINT32)(((UINTN)((Cmos0x35 << 8) + Cmos0x34) << 16) + SIZE_16MB);
-}
-
-STATIC
-UINT64
-PlatformGetSystemMemorySizeAbove4gb (
- )
-{
- UINT32 Size;
- UINTN CmosIndex;
-
- //
- // CMOS 0x5b-0x5d specifies the system memory above 4GB MB.
- // * CMOS(0x5d) is the most significant size byte
- // * CMOS(0x5c) is the middle size byte
- // * CMOS(0x5b) is the least significant size byte
- // * The size is specified in 64kb chunks
- //
-
- Size = 0;
- for (CmosIndex = 0x5d; CmosIndex >= 0x5b; CmosIndex--) {
- Size = (UINT32)(Size << 8) + (UINT32)PlatformCmosRead8 (CmosIndex);
- }
-
- return LShiftU64 (Size, 16);
-}
-
-/**
- Return the highest address that DXE could possibly use, plus one.
-**/
-STATIC
-UINT64
-PlatformGetFirstNonAddress (
- IN OUT EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- UINT64 FirstNonAddress;
- UINT32 FwCfgPciMmio64Mb;
- EFI_STATUS Status;
- FIRMWARE_CONFIG_ITEM FwCfgItem;
- UINTN FwCfgSize;
- UINT64 HotPlugMemoryEnd;
-
- //
- // set FirstNonAddress to suppress incorrect compiler/analyzer warnings
- //
- FirstNonAddress = 0;
-
- //
- // If QEMU presents an E820 map, then get the highest exclusive >=4GB RAM
- // address from it. This can express an address >= 4GB+1TB.
- //
- // Otherwise, get the flat size of the memory above 4GB from the CMOS (which
- // can only express a size smaller than 1TB), and add it to 4GB.
- //
- Status = PlatformScanOrAdd64BitE820Ram (FALSE, NULL, &FirstNonAddress);
- if (EFI_ERROR (Status)) {
- FirstNonAddress = BASE_4GB + PlatformGetSystemMemorySizeAbove4gb ();
- }
-
- //
- // If DXE is 32-bit, then we're done; PciBusDxe will degrade 64-bit MMIO
- // resources to 32-bit anyway. See DegradeResource() in
- // "PciResourceSupport.c".
- //
- #ifdef MDE_CPU_IA32
- if (!FeaturePcdGet (PcdDxeIplSwitchToLongMode)) {
- return FirstNonAddress;
- }
-
- #endif
-
- //
- // See if the user specified the number of megabytes for the 64-bit PCI host
- // aperture. Accept an aperture size up to 16TB.
- //
- // As signaled by the "X-" prefix, this knob is experimental, and might go
- // away at any time.
- //
- Status = QemuFwCfgParseUint32 (
- "opt/ovmf/X-PciMmio64Mb",
- FALSE,
- &FwCfgPciMmio64Mb
- );
- switch (Status) {
- case EFI_UNSUPPORTED:
- case EFI_NOT_FOUND:
- break;
- case EFI_SUCCESS:
- if (FwCfgPciMmio64Mb <= 0x1000000) {
- PlatformInfoHob->PcdPciMmio64Size = LShiftU64 (FwCfgPciMmio64Mb, 20);
- break;
- }
-
- //
- // fall through
- //
- default:
- DEBUG ((
- DEBUG_WARN,
- "%a: ignoring malformed 64-bit PCI host aperture size from fw_cfg\n",
- __FUNCTION__
- ));
- break;
- }
-
- if (PlatformInfoHob->PcdPciMmio64Size == 0) {
- if (PlatformInfoHob->BootMode != BOOT_ON_S3_RESUME) {
- DEBUG ((
- DEBUG_INFO,
- "%a: disabling 64-bit PCI host aperture\n",
- __FUNCTION__
- ));
- }
-
- //
- // There's nothing more to do; the amount of memory above 4GB fully
- // determines the highest address plus one. The memory hotplug area (see
- // below) plays no role for the firmware in this case.
- //
- return FirstNonAddress;
- }
-
- //
- // The "etc/reserved-memory-end" fw_cfg file, when present, contains an
- // absolute, exclusive end address for the memory hotplug area. This area
- // starts right at the end of the memory above 4GB. The 64-bit PCI host
- // aperture must be placed above it.
- //
- Status = QemuFwCfgFindFile (
- "etc/reserved-memory-end",
- &FwCfgItem,
- &FwCfgSize
- );
- if (!EFI_ERROR (Status) && (FwCfgSize == sizeof HotPlugMemoryEnd)) {
- QemuFwCfgSelectItem (FwCfgItem);
- QemuFwCfgReadBytes (FwCfgSize, &HotPlugMemoryEnd);
- DEBUG ((
- DEBUG_VERBOSE,
- "%a: HotPlugMemoryEnd=0x%Lx\n",
- __FUNCTION__,
- HotPlugMemoryEnd
- ));
-
- ASSERT (HotPlugMemoryEnd >= FirstNonAddress);
- FirstNonAddress = HotPlugMemoryEnd;
- }
-
- //
- // SeaBIOS aligns both boundaries of the 64-bit PCI host aperture to 1GB, so
- // that the host can map it with 1GB hugepages. Follow suit.
- //
- PlatformInfoHob->PcdPciMmio64Base = ALIGN_VALUE (FirstNonAddress, (UINT64)SIZE_1GB);
- PlatformInfoHob->PcdPciMmio64Size = ALIGN_VALUE (PlatformInfoHob->PcdPciMmio64Size, (UINT64)SIZE_1GB);
-
- //
- // The 64-bit PCI host aperture should also be "naturally" aligned. The
- // alignment is determined by rounding the size of the aperture down to the
- // next smaller or equal power of two. That is, align the aperture by the
- // largest BAR size that can fit into it.
- //
- PlatformInfoHob->PcdPciMmio64Base = ALIGN_VALUE (PlatformInfoHob->PcdPciMmio64Base, GetPowerOfTwo64 (PlatformInfoHob->PcdPciMmio64Size));
-
- //
- // The useful address space ends with the 64-bit PCI host aperture.
- //
- FirstNonAddress = PlatformInfoHob->PcdPciMmio64Base + PlatformInfoHob->PcdPciMmio64Size;
- return FirstNonAddress;
-}
-
-/**
- Initialize the PhysMemAddressWidth field in PlatformInfoHob based on guest RAM size.
-**/
-VOID
-EFIAPI
-PlatformAddressWidthInitialization (
- IN OUT EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- UINT64 FirstNonAddress;
- UINT8 PhysMemAddressWidth;
-
- //
- // As guest-physical memory size grows, the permanent PEI RAM requirements
- // are dominated by the identity-mapping page tables built by the DXE IPL.
- // The DXL IPL keys off of the physical address bits advertized in the CPU
- // HOB. To conserve memory, we calculate the minimum address width here.
- //
- FirstNonAddress = PlatformGetFirstNonAddress (PlatformInfoHob);
- PhysMemAddressWidth = (UINT8)HighBitSet64 (FirstNonAddress);
-
- //
- // If FirstNonAddress is not an integral power of two, then we need an
- // additional bit.
- //
- if ((FirstNonAddress & (FirstNonAddress - 1)) != 0) {
- ++PhysMemAddressWidth;
- }
-
- //
- // The minimum address width is 36 (covers up to and excluding 64 GB, which
- // is the maximum for Ia32 + PAE). The theoretical architecture maximum for
- // X64 long mode is 52 bits, but the DXE IPL clamps that down to 48 bits. We
- // can simply assert that here, since 48 bits are good enough for 256 TB.
- //
- if (PhysMemAddressWidth <= 36) {
- PhysMemAddressWidth = 36;
- }
-
- ASSERT (PhysMemAddressWidth <= 48);
-
- PlatformInfoHob->FirstNonAddress = FirstNonAddress;
- PlatformInfoHob->PhysMemAddressWidth = PhysMemAddressWidth;
-}
-
/**
Initialize the PhysMemAddressWidth field in PlatformInfoHob based on guest RAM size.
**/
@@ -840,313 +345,6 @@ PublishPeiMemory ( return Status;
}
-STATIC
-VOID
-QemuInitializeRamBelow1gb (
- IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- if (PlatformInfoHob->SmmSmramRequire && PlatformInfoHob->Q35SmramAtDefaultSmbase) {
- PlatformAddMemoryRangeHob (0, SMM_DEFAULT_SMBASE);
- PlatformAddReservedMemoryBaseSizeHob (
- SMM_DEFAULT_SMBASE,
- MCH_DEFAULT_SMBASE_SIZE,
- TRUE /* Cacheable */
- );
- STATIC_ASSERT (
- SMM_DEFAULT_SMBASE + MCH_DEFAULT_SMBASE_SIZE < BASE_512KB + BASE_128KB,
- "end of SMRAM at default SMBASE ends at, or exceeds, 640KB"
- );
- PlatformAddMemoryRangeHob (
- SMM_DEFAULT_SMBASE + MCH_DEFAULT_SMBASE_SIZE,
- BASE_512KB + BASE_128KB
- );
- } else {
- PlatformAddMemoryRangeHob (0, BASE_512KB + BASE_128KB);
- }
-}
-
-/**
- Peform Memory Detection for QEMU / KVM
-
-**/
-STATIC
-VOID
-PlatformQemuInitializeRam (
- IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- UINT64 LowerMemorySize;
- UINT64 UpperMemorySize;
- MTRR_SETTINGS MtrrSettings;
- EFI_STATUS Status;
-
- DEBUG ((DEBUG_INFO, "%a called\n", __FUNCTION__));
-
- //
- // Determine total memory size available
- //
- LowerMemorySize = PlatformGetSystemMemorySizeBelow4gb (PlatformInfoHob);
-
- if (PlatformInfoHob->BootMode == BOOT_ON_S3_RESUME) {
- //
- // Create the following memory HOB as an exception on the S3 boot path.
- //
- // Normally we'd create memory HOBs only on the normal boot path. However,
- // CpuMpPei specifically needs such a low-memory HOB on the S3 path as
- // well, for "borrowing" a subset of it temporarily, for the AP startup
- // vector.
- //
- // CpuMpPei saves the original contents of the borrowed area in permanent
- // PEI RAM, in a backup buffer allocated with the normal PEI services.
- // CpuMpPei restores the original contents ("returns" the borrowed area) at
- // End-of-PEI. End-of-PEI in turn is emitted by S3Resume2Pei before
- // transferring control to the OS's wakeup vector in the FACS.
- //
- // We expect any other PEIMs that "borrow" memory similarly to CpuMpPei to
- // restore the original contents. Furthermore, we expect all such PEIMs
- // (CpuMpPei included) to claim the borrowed areas by producing memory
- // allocation HOBs, and to honor preexistent memory allocation HOBs when
- // looking for an area to borrow.
- //
- QemuInitializeRamBelow1gb (PlatformInfoHob);
- } else {
- //
- // Create memory HOBs
- //
- QemuInitializeRamBelow1gb (PlatformInfoHob);
-
- if (PlatformInfoHob->SmmSmramRequire) {
- UINT32 TsegSize;
-
- TsegSize = PlatformInfoHob->Q35TsegMbytes * SIZE_1MB;
- PlatformAddMemoryRangeHob (BASE_1MB, LowerMemorySize - TsegSize);
- PlatformAddReservedMemoryBaseSizeHob (
- LowerMemorySize - TsegSize,
- TsegSize,
- TRUE
- );
- } else {
- PlatformAddMemoryRangeHob (BASE_1MB, LowerMemorySize);
- }
-
- //
- // If QEMU presents an E820 map, then create memory HOBs for the >=4GB RAM
- // entries. Otherwise, create a single memory HOB with the flat >=4GB
- // memory size read from the CMOS.
- //
- Status = PlatformScanOrAdd64BitE820Ram (TRUE, NULL, NULL);
- if (EFI_ERROR (Status)) {
- UpperMemorySize = PlatformGetSystemMemorySizeAbove4gb ();
- if (UpperMemorySize != 0) {
- PlatformAddMemoryBaseSizeHob (BASE_4GB, UpperMemorySize);
- }
- }
- }
-
- //
- // We'd like to keep the following ranges uncached:
- // - [640 KB, 1 MB)
- // - [LowerMemorySize, 4 GB)
- //
- // Everything else should be WB. Unfortunately, programming the inverse (ie.
- // keeping the default UC, and configuring the complement set of the above as
- // WB) is not reliable in general, because the end of the upper RAM can have
- // practically any alignment, and we may not have enough variable MTRRs to
- // cover it exactly.
- //
- if (IsMtrrSupported () && (PlatformInfoHob->HostBridgeDevId != CLOUDHV_DEVICE_ID)) {
- MtrrGetAllMtrrs (&MtrrSettings);
-
- //
- // MTRRs disabled, fixed MTRRs disabled, default type is uncached
- //
- ASSERT ((MtrrSettings.MtrrDefType & BIT11) == 0);
- ASSERT ((MtrrSettings.MtrrDefType & BIT10) == 0);
- ASSERT ((MtrrSettings.MtrrDefType & 0xFF) == 0);
-
- //
- // flip default type to writeback
- //
- SetMem (&MtrrSettings.Fixed, sizeof MtrrSettings.Fixed, 0x06);
- ZeroMem (&MtrrSettings.Variables, sizeof MtrrSettings.Variables);
- MtrrSettings.MtrrDefType |= BIT11 | BIT10 | 6;
- MtrrSetAllMtrrs (&MtrrSettings);
-
- //
- // Set memory range from 640KB to 1MB to uncacheable
- //
- Status = MtrrSetMemoryAttribute (
- BASE_512KB + BASE_128KB,
- BASE_1MB - (BASE_512KB + BASE_128KB),
- CacheUncacheable
- );
- ASSERT_EFI_ERROR (Status);
-
- //
- // Set the memory range from the start of the 32-bit MMIO area (32-bit PCI
- // MMIO aperture on i440fx, PCIEXBAR on q35) to 4GB as uncacheable.
- //
- Status = MtrrSetMemoryAttribute (
- PlatformInfoHob->Uc32Base,
- SIZE_4GB - PlatformInfoHob->Uc32Base,
- CacheUncacheable
- );
- ASSERT_EFI_ERROR (Status);
- }
-}
-
-STATIC
-VOID
-PlatformQemuInitializeRamForS3 (
- IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- )
-{
- if (PlatformInfoHob->S3Supported && (PlatformInfoHob->BootMode != BOOT_ON_S3_RESUME)) {
- //
- // This is the memory range that will be used for PEI on S3 resume
- //
- BuildMemoryAllocationHob (
- PlatformInfoHob->S3AcpiReservedMemoryBase,
- PlatformInfoHob->S3AcpiReservedMemorySize,
- EfiACPIMemoryNVS
- );
-
- //
- // Cover the initial RAM area used as stack and temporary PEI heap.
- //
- // This is reserved as ACPI NVS so it can be used on S3 resume.
- //
- BuildMemoryAllocationHob (
- PcdGet32 (PcdOvmfSecPeiTempRamBase),
- PcdGet32 (PcdOvmfSecPeiTempRamSize),
- EfiACPIMemoryNVS
- );
-
- //
- // SEC stores its table of GUIDed section handlers here.
- //
- BuildMemoryAllocationHob (
- PcdGet64 (PcdGuidedExtractHandlerTableAddress),
- PcdGet32 (PcdGuidedExtractHandlerTableSize),
- EfiACPIMemoryNVS
- );
-
- #ifdef MDE_CPU_X64
- //
- // Reserve the initial page tables built by the reset vector code.
- //
- // Since this memory range will be used by the Reset Vector on S3
- // resume, it must be reserved as ACPI NVS.
- //
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)PcdGet32 (PcdOvmfSecPageTablesBase),
- (UINT64)(UINTN)PcdGet32 (PcdOvmfSecPageTablesSize),
- EfiACPIMemoryNVS
- );
-
- if (PlatformInfoHob->SevEsIsEnabled) {
- //
- // If SEV-ES is enabled, reserve the GHCB-related memory area. This
- // includes the extra page table used to break down the 2MB page
- // mapping into 4KB page entries where the GHCB resides and the
- // GHCB area itself.
- //
- // Since this memory range will be used by the Reset Vector on S3
- // resume, it must be reserved as ACPI NVS.
- //
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)PcdGet32 (PcdOvmfSecGhcbPageTableBase),
- (UINT64)(UINTN)PcdGet32 (PcdOvmfSecGhcbPageTableSize),
- EfiACPIMemoryNVS
- );
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)PcdGet32 (PcdOvmfSecGhcbBase),
- (UINT64)(UINTN)PcdGet32 (PcdOvmfSecGhcbSize),
- EfiACPIMemoryNVS
- );
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)PcdGet32 (PcdOvmfSecGhcbBackupBase),
- (UINT64)(UINTN)PcdGet32 (PcdOvmfSecGhcbBackupSize),
- EfiACPIMemoryNVS
- );
- }
-
- #endif
- }
-
- if (PlatformInfoHob->BootMode != BOOT_ON_S3_RESUME) {
- if (!PlatformInfoHob->SmmSmramRequire) {
- //
- // Reserve the lock box storage area
- //
- // Since this memory range will be used on S3 resume, it must be
- // reserved as ACPI NVS.
- //
- // If S3 is unsupported, then various drivers might still write to the
- // LockBox area. We ought to prevent DXE from serving allocation requests
- // such that they would overlap the LockBox storage.
- //
- ZeroMem (
- (VOID *)(UINTN)PcdGet32 (PcdOvmfLockBoxStorageBase),
- (UINTN)PcdGet32 (PcdOvmfLockBoxStorageSize)
- );
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)PcdGet32 (PcdOvmfLockBoxStorageBase),
- (UINT64)(UINTN)PcdGet32 (PcdOvmfLockBoxStorageSize),
- PlatformInfoHob->S3Supported ? EfiACPIMemoryNVS : EfiBootServicesData
- );
- }
-
- if (PlatformInfoHob->SmmSmramRequire) {
- UINT32 TsegSize;
-
- //
- // Make sure the TSEG area that we reported as a reserved memory resource
- // cannot be used for reserved memory allocations.
- //
- TsegSize = PlatformInfoHob->Q35TsegMbytes * SIZE_1MB;
- BuildMemoryAllocationHob (
- PlatformGetSystemMemorySizeBelow4gb (PlatformInfoHob) - TsegSize,
- TsegSize,
- EfiReservedMemoryType
- );
- //
- // Similarly, allocate away the (already reserved) SMRAM at the default
- // SMBASE, if it exists.
- //
- if (PlatformInfoHob->Q35SmramAtDefaultSmbase) {
- BuildMemoryAllocationHob (
- SMM_DEFAULT_SMBASE,
- MCH_DEFAULT_SMBASE_SIZE,
- EfiReservedMemoryType
- );
- }
- }
-
- #ifdef MDE_CPU_X64
- if (FixedPcdGet32 (PcdOvmfWorkAreaSize) != 0) {
- //
- // Reserve the work area.
- //
- // Since this memory range will be used by the Reset Vector on S3
- // resume, it must be reserved as ACPI NVS.
- //
- // If S3 is unsupported, then various drivers might still write to the
- // work area. We ought to prevent DXE from serving allocation requests
- // such that they would overlap the work area.
- //
- BuildMemoryAllocationHob (
- (EFI_PHYSICAL_ADDRESS)(UINTN)FixedPcdGet32 (PcdOvmfWorkAreaBase),
- (UINT64)(UINTN)FixedPcdGet32 (PcdOvmfWorkAreaSize),
- PlatformInfoHob->S3Supported ? EfiACPIMemoryNVS : EfiBootServicesData
- );
- }
-
- #endif
- }
-}
-
/**
Publish system RAM and reserve memory regions
diff --git a/OvmfPkg/PlatformPei/Platform.h b/OvmfPkg/PlatformPei/Platform.h index 635d58379a..3d14889340 100644 --- a/OvmfPkg/PlatformPei/Platform.h +++ b/OvmfPkg/PlatformPei/Platform.h @@ -34,18 +34,6 @@ PublishPeiMemory ( VOID
);
-UINT32
-EFIAPI
-PlatformGetSystemMemorySizeBelow4gb (
- IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- );
-
-VOID
-EFIAPI
-PlatformQemuUc32BaseInitialization (
- IN OUT EFI_HOB_PLATFORM_INFO *PlatformInfoHob
- );
-
VOID
InitializeRamRegions (
IN EFI_HOB_PLATFORM_INFO *PlatformInfoHob
|